In the previous [part](https://0xax.gitbooks.io/linux-insides/content/Initialization/linux-initialization-1.html) we stopped before setting of early interrupt handlers. At this moment we are in the decompressed Linux kernel, we have basic [paging](https://en.wikipedia.org/wiki/Page_table) structure for early boot and our current goal is to finish early preparation before the main kernel code will start to work.
We already started to do this preparation in the previous [first](https://0xax.gitbooks.io/linux-insides/content/Initialization/linux-initialization-1.html) part of this [chapter](https://0xax.gitbooks.io/linux-insides/content/Initialization/index.html). We continue in this part and will know more about interrupt and exception handling.
from the [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head64.c) source code file. But before we started to sort out this code, we need to know about interrupts and handlers.
An interrupt is an event caused by software or hardware to the CPU. For example a user have pressed a key on keyboard. On interrupt, CPU stops the current task and transfer control to the special routine which is called - [interrupt handler](https://en.wikipedia.org/wiki/Interrupt_handler). An interrupt handler handles and interrupt and transfer control back to the previously stopped task. We can split interrupts on three types:
Every interrupt and exception is assigned a unique number which called - `vector number`. `Vector number` can be any number from `0` to `255`. There is common practice to use first `32` vector numbers for exceptions, and vector numbers from `32` to `255` are used for user-defined interrupts. We can see it in the code above - `NUM_EXCEPTION_VECTORS`, which defined as:
CPU uses vector number as an index in the `Interrupt Descriptor Table` (we will see description of it soon). CPU catch interrupts from the [APIC](http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller) or through it's pins. Following table shows `0-31` exceptions:
To react on interrupt CPU uses special structure - Interrupt Descriptor Table or IDT. IDT is an array of 8-byte descriptors like Global Descriptor Table, but IDT entries are called `gates`. CPU multiplies vector number on 8 to find index of the IDT entry. But in 64-bit mode IDT is an array of 16-byte descriptors and CPU multiplies vector number on 16 to find index of the entry in the IDT. We remember from the previous part that CPU uses special `GDTR` register to locate Global Descriptor Table, so CPU uses special register `IDTR` for Interrupt Descriptor Table and `lidt` instruction for loading base address of the table into this register.
Interrupt and trap descriptors contain a far pointer to the entry point of the interrupt handler. Only one difference between these types is how CPU handles `IF` flag. If interrupt handler was accessed through interrupt gate, CPU clear the `IF` flag to prevent other interrupts while current interrupt handler executes. After that current interrupt handler executes, CPU sets the `IF` flag again with `iret` instruction.
and inserts an interrupt gate to the `IDT` table which is represented by the `&idt_descr` array. First of all let's look on the `early_idt_handler_array` array. It is an array which is defined in the [arch/x86/include/asm/segment.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/asm/segment.h) header file contains addresses of the first `32` exception handlers:
The `early_idt_handler_array` is `288` bytes array which contains address of exception entry points every nine bytes. Every nine bytes of this array consist of two bytes optional instruction for pushing dummy error code if an exception does not provide it, two bytes instruction for pushing vector number to the stack and five bytes of `jump` to the common exception handler code.
As we can see, We're filling only first 32 `IDT` entries in the loop, because all of the early setup runs with interrupts disabled, so there is no need to set up interrupt handlers for vectors greater than `32`. The `early_idt_handler_array` array contains generic idt handlers and we can find its definition in the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head_64.S) assembly file. For now we will skip it, but will look it soon. Before this we will look on the implementation of the `set_intr_gate` function.
The `set_intr_gate` function is defined in the [arch/x86/kernel/idt.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/idt.c) source file and looks:
First of all it checks with that passed interrupt number is not greater than `255` with `BUG_ON` macro. We need to do this check because we can have only `256` interrupts. After this, we setup the idt data with the given values. And then we call `idt_setup_from_table` function which looks like:
which fill three parts of the address of the interrupt handler with the address which we got in the main loop (address of the interrupt handler entry point). And then we just copy the gate descriptor to the idt entry.
After that main loop will finished, we will have filled `idt_table` array of `gate_desc` structures and we can load `Interrupt Descriptor table` with the call of the:
You can note that there are calls of the `_trace_*` functions in the `_set_gate` and other functions. These functions fills `IDT` gates in the same manner that `_set_gate` but with one difference. These functions use `trace_idt_table` the `Interrupt Descriptor Table` instead of `idt_table` for tracepoints (we will cover this theme in the another part).
Okay, now we have filled and loaded `Interrupt Descriptor Table`, we know how the CPU acts during an interrupt. So now time to deal with interrupts handlers.
As you can read above, we filled `IDT` with the address of the `early_idt_handler_array`. We can find it in the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) assembly file:
Functions which tend to not be called directly by other functions, such as syscall and interrupt handlers, often do unusual non-C-function-type things with the stack pointer. Such code needs to be annotated by using `UNWIND_HINT_IRET_REGS` macro such that objtool can understand it. We can see here, interrupt handlers generation for the first `32` exceptions. We check here, if exception has an error code then we do nothing, if exception does not return error code, we push zero to the stack. We do it for that would stack was uniform. After that we push exception number on the stack and jump on the `early_idt_handler_array` which is generic interrupt handler for now. As we may see above, every nine bytes of the `early_idt_handler_array` array consists from optional push of an error code, push of `vector number` and jump instruction. We can see it in the output of the `objdump` util:
As i wrote above, CPU pushes flag register, `CS` and `RIP` on the stack. So before `early_idt_handler` will be executed, stack will contain following data:
Now let's look on the `early_idt_handler_common` implementation. It locates in the same [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head_64.S#L343) assembly file and first of all we can see check for [NMI](http://en.wikipedia.org/wiki/Non-maskable_interrupt). We don't need to handle it, so just ignore it in the `early_idt_handler_common`:
drops an error code and vector number from the stack and call `INTERRUPT_RETURN` which is just expands to the `iretq` instruction. As we checked the vector number and it is not `NMI`, we check `early_recursion_flag` to prevent recursion in the `early_idt_handler_common` and if it's correct we save general registers on the stack:
After the code segment was checked, we check the vector number, and if it is `#PF` or [Page Fault](https://en.wikipedia.org/wiki/Page_fault), we put value from the `cr2` to the `rdi` register and call `early_make_pgtable` (well see it soon):
If vector number is not `#PF`, we restore general purpose registers from the stack:
```assembly
popq %r11
popq %r10
popq %r9
popq %r8
popq %rdi
popq %rsi
popq %rdx
popq %rcx
popq %rax
```
and exit from the handler with `iret`.
It is the end of the first interrupt handler. Note that it is very early interrupt handler, so it handles only Page Fault now. We will see handlers for the other interrupts, but now let's look on the page fault handler.
In the previous paragraph we saw first early interrupt handler which checks interrupt number for page fault and calls `early_make_pgtable` for building new page tables if it is. We need to have `#PF` handler in this step because there are plans to add ability to load kernel above `4G` and make access to `boot_params` structure above the 4G.
You can find implementation of the `early_make_pgtable` in the [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head64.c) and takes one parameter - address from the `cr2` register, which caused Page Fault. Let's look on it:
Also we will operate with the `*_t` (not val) types, for example `pgd_t` and etc... All of these types defined in the [arch/x86/include/asm/pgtable_types.h](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/include/asm/pgtable_types.h) and represent structures like this:
Here `early_level4_pgt` presents early top-level page table directory which consists of an array of `pgd_t` types and `pgd` points to low-level page entries.
After we made the check that we have no invalid address, we're getting the address of the Page Global Directory entry which contains `#PF` address and put it's value to the `pgd` variable:
In the next step we check `pgd`, if it contains correct page global directory entry we put physical address of the page global directory entry and put it to the `pud_p` with:
If `pgd` does not contain correct address we check that `next_early_pgt` is not greater than `EARLY_DYNAMIC_PAGE_TABLES` which is `64` and present a fixed number of buffers to set up new page tables on demand. If `next_early_pgt` is greater than `EARLY_DYNAMIC_PAGE_TABLES` we reset page tables and start again. If `next_early_pgt` is less than `EARLY_DYNAMIC_PAGE_TABLES`, we create new page upper directory pointer which points to the current dynamic page table and writes it's physical address with the `_KERPG_TABLE` access rights to the page global directory:
```C
if (next_early_pgt >= EARLY_DYNAMIC_PAGE_TABLES) {
After this we fix up address of the page upper directory with:
```C
pud_p += pud_index(address);
pud = *pud_p;
```
In the next step we do the same actions as we did before, but with the page middle directory. In the end we fix address of the page middle directory which contains maps kernel text+data virtual addresses:
```C
pmd = (physaddr & PMD_MASK) + early_pmd_flags;
pmd_p[pmd_index(address)] = pmd;
```
After page fault handler finished it's work and as result our `early_level4_pgt` contains entries which point to the valid addresses.
This is the end of the second part about linux kernel insides. If you have questions or suggestions, ping me in twitter [0xAX](https://twitter.com/0xAX), drop me [email](anotherworldofworld@gmail.com) or just create [issue](https://github.com/0xAX/linux-insides/issues/new). In the next part we will see all steps before kernel entry point - `start_kernel` function.
**Please note that English is not my first language and I am really sorry for any inconvenience. If you found any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-insides).**