--- controls: version: "k3s-cis-1.7" id: 4 text: "Worker Node Security Configuration" type: "node" groups: - id: 4.1 text: "Worker Node Configuration Files" checks: - id: 4.1.1 text: "Ensure that the kubelet service file permissions are set to 600 or more restrictive (Automated)" type: "skip" audit: '/bin/sh -c ''if test -e $kubeletsvc; then stat -c permissions=%a $kubeletsvc; fi'' ' tests: test_items: - flag: "permissions" compare: op: bitmask value: "600" remediation: | Not Applicable. The kubelet is embedded in the k3s process. There is no kubelet service file, all configuration is passed in as arguments at runtime. scored: true - id: 4.1.2 text: "Ensure that the kubelet service file ownership is set to root:root (Automated)" type: "skip" audit: '/bin/sh -c ''if test -e $kubeletsvc; then stat -c %U:%G $kubeletsvc; fi'' ' tests: test_items: - flag: root:root remediation: | Not Applicable. The kubelet is embedded in the k3s process. There is no kubelet service file, all configuration is passed in as arguments at runtime. Not Applicable. All configuration is passed in as arguments at container run time. scored: true - id: 4.1.3 text: "If proxy kubeconfig file exists ensure permissions are set to 600 or more restrictive (Automated)" audit: '/bin/sh -c ''if test -e $proxykubeconfig; then stat -c permissions=%a $proxykubeconfig; fi'' ' tests: bin_op: or test_items: - flag: "permissions" compare: op: bitmask value: "600" remediation: | Run the below command (based on the file location on your system) on the each worker node. For example, chmod 600 $proxykubeconfig scored: true - id: 4.1.4 text: "If proxy kubeconfig file exists ensure ownership is set to root:root (Automated)" audit: '/bin/sh -c ''if test -e $proxykubeconfig; then stat -c %U:%G $proxykubeconfig; fi'' ' tests: bin_op: or test_items: - flag: root:root remediation: | Run the below command (based on the file location on your system) on the each worker node. For example, chown root:root $proxykubeconfig scored: true - id: 4.1.5 text: "Ensure that the --kubeconfig kubelet.conf file permissions are set to 600 or more restrictive (Automated)" audit: '/bin/sh -c ''if test -e $kubeletkubeconfig; then stat -c permissions=%a $kubeletkubeconfig; fi'' ' tests: test_items: - flag: "permissions" compare: op: bitmask value: "600" remediation: | Run the below command (based on the file location on your system) on the each worker node. For example, chmod 600 $kubeletkubeconfig scored: true - id: 4.1.6 text: "Ensure that the --kubeconfig kubelet.conf file ownership is set to root:root (Automated)" audit: 'stat -c %U:%G $kubeletkubeconfig' tests: test_items: - flag: root:root remediation: | Run the below command (based on the file location on your system) on the each worker node. For example, chown root:root $kubeletkubeconfig scored: true - id: 4.1.7 text: "Ensure that the certificate authorities file permissions are set to 600 or more restrictive (Automated)" audit: "stat -c permissions=%a $kubeletcafile" tests: test_items: - flag: "permissions" compare: op: bitmask value: "600" remediation: | Run the following command to modify the file permissions of the --client-ca-file chmod 600 $kubeletcafile scored: true - id: 4.1.8 text: "Ensure that the client certificate authorities file ownership is set to root:root (Automated)" audit: "stat -c %U:%G $kubeletcafile" tests: test_items: - flag: root:root compare: op: eq value: root:root remediation: | Run the following command to modify the ownership of the --client-ca-file. chown root:root $kubeletcafile scored: true - id: 4.1.9 text: "Ensure that the kubelet --config configuration file has permissions set to 600 or more restrictive (Automated)" type: "skip" audit: '/bin/sh -c ''if test -e $kubeletconf; then stat -c permissions=%a $kubeletconf; fi'' ' tests: test_items: - flag: "permissions" compare: op: bitmask value: "600" remediation: | Not Applicable. The kubelet is embedded in the k3s process. There is no kubelet config file, all configuration is passed in as arguments at runtime. scored: true - id: 4.1.10 text: "Ensure that the kubelet --config configuration file ownership is set to root:root (Automated)" type: "skip" audit: '/bin/sh -c ''if test -e $kubeletconf; then stat -c %U:%G $kubeletconf; fi'' ' tests: test_items: - flag: root:root remediation: | Not Applicable. The kubelet is embedded in the k3s process. There is no kubelet config file, all configuration is passed in as arguments at runtime. scored: true - id: 4.2 text: "Kubelet" checks: - id: 4.2.1 text: "Ensure that the --anonymous-auth argument is set to false (Automated)" audit: '/bin/sh -c ''if test $(journalctl -m -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -m -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "anonymous-auth" | grep -v grep; else echo "--anonymous-auth=false"; fi'' ' tests: test_items: - flag: "--anonymous-auth" path: '{.authentication.anonymous.enabled}' compare: op: eq value: false remediation: | By default, K3s sets the --anonymous-auth to false. If you have set this to a different value, you should set it back to false. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below. kubelet-arg: - "anonymous-auth=true" If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="anonymous-auth=true" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service scored: true - id: 4.2.2 text: "Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated)" audit: '/bin/sh -c ''if test $(journalctl -m -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -m -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "authorization-mode"; else echo "--authorization-mode=Webhook"; fi'' ' audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: test_items: - flag: --authorization-mode path: '{.authorization.mode}' compare: op: nothave value: AlwaysAllow remediation: | By default, K3s does not set the --authorization-mode to AlwaysAllow. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below. kubelet-arg: - "authorization-mode=AlwaysAllow" If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="authorization-mode=AlwaysAllow" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service scored: true - id: 4.2.3 text: "Ensure that the --client-ca-file argument is set as appropriate (Automated)" audit: '/bin/sh -c ''if test $(journalctl -m -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -m -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "client-ca-file"; else echo "--client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt"; fi'' ' tests: test_items: - flag: --client-ca-file path: '{.authentication.x509.clientCAFile}' remediation: | By default, K3s automatically provides the client ca certificate for the Kubelet. It is generated and located at /var/lib/rancher/k3s/agent/client-ca.crt scored: true - id: 4.2.4 text: "Verify that the --read-only-port argument is set to 0 (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: bin_op: or test_items: - flag: "--read-only-port" path: '{.readOnlyPort}' compare: op: eq value: 0 - flag: "--read-only-port" path: '{.readOnlyPort}' set: false remediation: | By default, K3s sets the --read-only-port to 0. If you have set this to a different value, you should set it back to 0. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below. kubelet-arg: - "read-only-port=XXXX" If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="read-only-port=XXXX" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service scored: true - id: 4.2.5 text: "Ensure that the --streaming-connection-idle-timeout argument is not set to 0 (Manual)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" tests: test_items: - flag: --streaming-connection-idle-timeout path: '{.streamingConnectionIdleTimeout}' compare: op: noteq value: 0 - flag: --streaming-connection-idle-timeout path: '{.streamingConnectionIdleTimeout}' set: false bin_op: or remediation: | If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter to an appropriate value. kubelet-arg: - "streaming-connection-idle-timeout=5m" If using the command line, run K3s with --kubelet-arg="streaming-connection-idle-timeout=5m". Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: false - id: 4.2.6 text: "Ensure that the --make-iptables-util-chains argument is set to true (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" tests: test_items: - flag: --make-iptables-util-chains path: '{.makeIPTablesUtilChains}' compare: op: eq value: true - flag: --make-iptables-util-chains path: '{.makeIPTablesUtilChains}' set: false bin_op: or remediation: | If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter. kubelet-arg: - "make-iptables-util-chains=true" If using the command line, run K3s with --kubelet-arg="make-iptables-util-chains=true". Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: true - id: 4.2.7 text: "Ensure that the --hostname-override argument is not set (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" type: "skip" tests: test_items: - flag: --hostname-override set: false remediation: | Not Applicable. By default, K3s does set the --hostname-override argument. Per CIS guidelines, this is to comply with cloud providers that require this flag to ensure that hostname matches node names. scored: true - id: 4.2.8 text: "Ensure that the eventRecordQPS argument is set to a level which ensures appropriate event capture (Manual)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: test_items: - flag: --event-qps path: '{.eventRecordQPS}' compare: op: gte value: 0 - flag: --event-qps path: '{.eventRecordQPS}' set: false bin_op: or remediation: | By default, K3s sets the event-qps to 0. Should you wish to change this, If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter to an appropriate value. kubelet-arg: - "event-qps=" If using the command line, run K3s with --kubelet-arg="event-qps=". Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: false - id: 4.2.9 text: "Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" tests: test_items: - flag: --tls-cert-file path: '/var/lib/rancher/k3s/agent/serving-kubelet.crt' - flag: --tls-private-key-file path: '/var/lib/rancher/k3s/agent/serving-kubelet.key' remediation: | By default, K3s automatically provides the TLS certificate and private key for the Kubelet. They are generated and located at /var/lib/rancher/k3s/agent/serving-kubelet.crt and /var/lib/rancher/k3s/agent/serving-kubelet.key If for some reason you need to provide your own certificate and key, you can set the the below parameters in the K3s config file /etc/rancher/k3s/config.yaml. kubelet-arg: - "tls-cert-file=" - "tls-private-key-file=" scored: true - id: 4.2.10 text: "Ensure that the --rotate-certificates argument is not set to false (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: test_items: - flag: --rotate-certificates path: '{.rotateCertificates}' compare: op: eq value: true - flag: --rotate-certificates path: '{.rotateCertificates}' set: false bin_op: or remediation: | By default, K3s does not set the --rotate-certificates argument. If you have set this flag with a value of `false`, you should either set it to `true` or completely remove the flag. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any rotate-certificates parameter. If using the command line, remove the K3s flag --kubelet-arg="rotate-certificates". Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: true - id: 4.2.11 text: "Verify that the RotateKubeletServerCertificate argument is set to true (Automated)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/cat $kubeletconf" tests: bin_op: or test_items: - flag: RotateKubeletServerCertificate path: '{.featureGates.RotateKubeletServerCertificate}' compare: op: nothave value: false - flag: RotateKubeletServerCertificate path: '{.featureGates.RotateKubeletServerCertificate}' set: false remediation: | By default, K3s does not set the RotateKubeletServerCertificate feature gate. If you have enabled this feature gate, you should remove it. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any feature-gate=RotateKubeletServerCertificate parameter. If using the command line, remove the K3s flag --kubelet-arg="feature-gate=RotateKubeletServerCertificate". Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: true - id: 4.2.12 text: "Ensure that the Kubelet only makes use of Strong Cryptographic Ciphers (Manual)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: test_items: - flag: --tls-cipher-suites path: '{range .tlsCipherSuites[:]}{}{'',''}{end}' compare: op: valid_elements value: TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 remediation: | If using a K3s config file /etc/rancher/k3s/config.yaml, edit the file to set `TLSCipherSuites` to kubelet-arg: - "tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305" or to a subset of these values. If using the command line, add the K3s flag --kubelet-arg="tls-cipher-suites=" Based on your system, restart the k3s service. For example, systemctl restart k3s.service scored: false - id: 4.2.13 text: "Ensure that a limit is set on pod PIDs (Manual)" audit: "journalctl -m -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1" audit_config: "/bin/sh -c 'if test -e $kubeletconf; then /bin/cat $kubeletconf; fi' " tests: test_items: - flag: --pod-max-pids path: '{.podPidsLimit}' remediation: | Decide on an appropriate level for this parameter and set it, If using a K3s config file /etc/rancher/k3s/config.yaml, edit the file to set `podPidsLimit` to kubelet-arg: - "pod-max-pids=" scored: false