gns3-server/gns3server/configs/ios_etherswitch_startup-config.txt

!
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
!
hostname %h
!
ip cef
no ip routing
no ip domain-lookup
no ip icmp rate-limit unreachable
ip tcp synwait 5
no cdp log mismatch duplex
vtp file nvram:vlan.dat
!
!
interface FastEthernet0/0
 description *** Unused for Layer2 EtherSwitch ***
 no ip address
 shutdown
!
interface FastEthernet0/1
 description *** Unused for Layer2 EtherSwitch ***
 no ip address
 shutdown
!
interface FastEthernet1/0
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/1
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/2
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/3
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/4
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/5
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/6
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/7
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/8
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/9
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/10
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/11
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/12
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/13
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/14
 no shutdown
 duplex full
 speed 100
!
interface FastEthernet1/15
 no shutdown
 duplex full
 speed 100
!
interface Vlan1
 no ip address
 shutdown
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
 privilege level 15
 no login
line aux 0
 exec-timeout 0 0
 logging synchronous
 privilege level 15
 no login
!
!
banner exec $

***************************************************************
This is a normal Router with a SW module inside (NM-16ESW)
It has been preconfigured with hard coded speed and duplex

To create vlans use the command "vlan database" from exec mode
After creating all desired vlans use "exit" to apply the config

To view existing vlans use the command "show vlan-switch brief"

Warning: You are using an old IOS image for this router.
Please update the IOS to enable the "macro" command!
***************************************************************

$
!
!Warning: If the IOS is old and doesn't support macro, it will stop the configuration loading from this point!
!
macro name add_vlan
end
vlan database
vlan $v
exit
@
macro name del_vlan
end
vlan database
no vlan $v
exit
@
!
!
banner exec $

***************************************************************
This is a normal Router with a Switch module inside (NM-16ESW)
It has been pre-configured with hard-coded speed and duplex

To create vlans use the command "vlan database" in exec mode
After creating all desired vlans use "exit" to apply the config

To view existing vlans use the command "show vlan-switch brief"

Alias(exec)     : vl   - "show vlan-switch brief" command
Alias(configure): va X - macro to add vlan X
Alias(configure): vd X - macro to delete vlan X
***************************************************************

$
!
alias configure va macro global trace add_vlan $v
alias configure vd macro global trace del_vlan $v
alias exec vl show vlan-switch brief
!
!
end