[[c_authorization_authentication]] == Authorization and Authentication When you receive bitcoins, you have to decide who will have permission to spend them, called _authorization_. You also have to decide how full nodes will distinguish the authorized spenders from everyone else, called _authentication_. Your authorization instructions and the spender proof of authentication will be checked by thousands of independent full nodes which all need to come to the same conclusion that a spend was authorized and authentic in order for the transaction containing it to be valid. The original description of Bitcoin used a public key for authorization. Alice paid Bob by putting his public key in the output of a transaction. Authentication came from Bob in the form of a signature that committed to a spending transaction, such as from Bob to Carol. The actual version of Bitcoin that was originally released provided a more flexible mechanism for both authorization and authentication. Improvements since then have only increased that flexibility. In this chapter, we'll explore those features and see how they're most commonly used. [[tx_script]] [role="pagebreak-before less_space_h1"] === Transaction Scripts and Script Language ((("transactions", "scripts and Script language", id="Tsript06")))((("scripting", "transactions and", id="Stransact06")))The original version of Bitcoin introduced a new programming language called _Script_, a Forth-like stack-based language. Both the script placed in an output and the legacy input script used in a spending transaction are written in this scripting language. Script is a very simple language. It requires minimal processing and cannot easily do many of the fancy things modern programming languages can do. ((("Pay-to-Public-Key-Hash (P2PKH)")))When legacy transactions were the most commonly used type of transaction, the majority of transactions processed through the Bitcoin network had the form "Payment to Bob's Bitcoin address" and used a script called a Pay-to-Public-Key-Hash script. However, Bitcoin transactions are not limited to the "Payment to Bob's Bitcoin address" script. In fact, scripts can be written to express a vast variety of complex conditions. In order to understand these more complex scripts, we must first understand the basics of transaction scripts and Script language. In this section, we will demonstrate the basic components of the Bitcoin transaction scripting language and show how it can be used to express conditions for spending and how those conditions can be satisfied. [TIP] ==== ((("programmable money")))Bitcoin transaction validation is not based on a static pattern, but instead is achieved through the execution of a scripting language. This language allows for a nearly infinite variety of conditions to be expressed. ==== ==== Turing Incompleteness ((("Turing incompleteness")))The bitcoin transaction script language contains many operators, but is deliberately limited in one important way--there are no loops or complex flow control capabilities other than conditional flow control. This ensures that the language is not _Turing Complete_, meaning that scripts have limited complexity and predictable execution times. Script is not a general-purpose language. ((("denial-of-service attacks")))((("denial-of-service attacks", see="also security")))((("security", "denial-of-service attacks")))These limitations ensure that the language cannot be used to create an infinite loop or other form of "logic bomb" that could be embedded in a transaction in a way that causes a denial-of-service attack against the Bitcoin network. Remember, every transaction is validated by every full node on the Bitcoin network. A limited language prevents the transaction validation mechanism from being used as a vulnerability. ==== Stateless Verification ((("stateless verification")))The Bitcoin transaction script language is stateless, in that there is no state prior to execution of the script, or state saved after execution of the script. All the information needed to execute a script is contained within the script and the transaction executing the script. A script will predictably execute the same way on any system. If your system verified a script, you can be sure that every other system in the Bitcoin network will also verify the script, meaning that a valid transaction is valid for everyone and everyone knows this. This predictability of outcomes is an essential benefit of the Bitcoin system. [[tx_lock_unlock]] ==== Script Construction Bitcoin's legacy transaction validation engine relies on two parts of scripts to validate transactions: an output script and an input script. An output script is a spending condition placed on an output: it specifies the conditions that must be met to spend the output in the future, such as who is authorized to spend the output and how they will be authenticated. An input script is a script that satisfies the conditions placed on an output by an output script and allows the output to be spent. Input scripts are part of every transaction input. Most of the time in legacy transactions they contain a digital signature produced by the user's wallet from his or her private key, but not all input scripts must contain signatures. Every bitcoin validating node will validate transactions by executing the output and input scripts. As we saw in <>, each input contains an outpoint which refers to a previous transaction output. The input also contains an input script. The validation software will copy the input script, retrieve the UTXO referenced by the input, and copy the output script from that UTXO. The input and output scripts are then executed in sequence. The input is valid if the input script satisfies the output script's conditions (see <>). All the inputs are validated independently, as part of the overall validation of the transaction. Note that the steps above involve making copies of all data. The original data in the previous output and current input is never changed. In particular, the previous output is invariable and unaffected by failed attempts to spend it. Only a valid transaction that correctly satisfies the conditions of the output script results in the output being considered as "spent". <> is an example of the output and input scripts for the most common type of legacy Bitcoin transaction (a payment to a public key hash), showing the combined script resulting from the concatenation of the scripts prior to validation. //FIXME: revise to use "output script" and "input script" from chap 6 [[input_and_output_scripts_legacy]] .Combining input and output scripts to evaluate a transaction script image::../images/mbc2_0603.png["input_and_output_scripts"] ===== The script execution stack Bitcoin's scripting language is called a stack-based language because it uses a data structure called a _stack_. A stack is a very simple data structure that can be visualized as a stack of cards. A stack allows two operations: push and pop. Push adds an item on top of the stack. Pop removes the top item from the stack. Operations on a stack can only act on the topmost item on the stack. A stack data structure is also called a Last-In-First-Out, or "LIFO" queue. The scripting language executes the script by processing each item from left to right. Numbers (data constants) are pushed onto the stack. Operators push or pop one or more parameters from the stack, act on them, and might push a result onto the stack. For example, +OP_ADD+ will pop two items from the stack, add them, and push the resulting sum onto the stack. Conditional operators evaluate a condition, producing a boolean result of TRUE or FALSE. For example, +OP_EQUAL+ pops two items from the stack and pushes TRUE (TRUE is represented by the number 1) if they are equal or FALSE (represented by zero) if they are not equal. Bitcoin transaction scripts usually contain a conditional operator, so that they can produce the TRUE result that signifies a valid transaction. ===== A simple script Now let's apply what we've learned about scripts and stacks to some simple examples. In <>, the script +2 3 OP_ADD 5 OP_EQUAL+ demonstrates the arithmetic addition operator +OP_ADD+, adding two numbers and putting the result on the stack, followed by the conditional operator +OP_EQUAL+, which checks that the resulting sum is equal to +5+. For brevity, the +OP_+ prefix may sometimes be omitted in examples in this book. For more details on the available script operators and functions, see https://en.bitcoin.it/wiki/Script[Bitcoin Wiki's script page]. Although most legacy output scripts refer to a public key hash (essentially, a legacy Bitcoin address), thereby requiring proof of ownership to spend the funds, the script does not have to be that complex. Any combination of output and input scripts that results in a TRUE value is valid. The simple arithmetic we used as an example of the scripting language is also a valid script. Use part of the arithmetic example script as the output script: ---- 3 OP_ADD 5 OP_EQUAL ---- which can be satisfied by a transaction containing an input with the input script: ---- 2 ---- The validation software combines the scripts: ---- 2 3 OP_ADD 5 OP_EQUAL ---- As we saw in <>, when this script is executed, the result is +OP_TRUE+, making the transaction valid. Not only have we shown a valid transaction output script, but the resulting UTXO could be spent by anyone with the arithmetic skills to know that the number 2 satisfies the script. [TIP] ==== ((("transactions", "valid and invalid")))Transactions are valid if the top result on the stack is +TRUE+, which is any non-zero value. Transactions are invalid if the top value on the stack is +FALSE+ (the value zero or an empty stack), the script execution is halted explicitly by an operator (such as +VERIFY+, +OP_RETURN+), or the script was not semantically valid (such as containing an +OP_IF+ statement that was not terminated by an +OP_ENDIF+ opcode). For details, see https://en.bitcoin.it/wiki/Script[Bitcoin Wiki's script page]. ==== [[simplemath_script]] .Bitcoin's script validation doing simple math image::../images/mbc2_0604.png["TxScriptSimpleMathExample"] [role="pagebreak-before"] The following is a slightly more complex script, which calculates ++2 + 7 -- 3 + 1++. Notice that when the script contains several operators in a row, the stack allows the results of one operator to be acted upon by the next operator: ---- 2 7 OP_ADD 3 OP_SUB 1 OP_ADD 7 OP_EQUAL ---- Try validating the preceding script yourself using pencil and paper. When the script execution ends, you should be left with a +TRUE+ value on the stack. [[script_exec]] ===== Separate execution of output and input scripts In the original Bitcoin client, output and input scripts were concatenated and executed in sequence. For security reasons, this was changed in 2010 because of a vulnerability known as the +1 OP_RETURN+ bug. In the current implementation, the scripts are executed separately with the stack transferred between the two executions. First, the input script executed using the stack execution engine. If the input script is executed without errors and has no operations left over, the stack is copied and the output script is executed. If the result of executing the output script with the stack data copied from the input script is +TRUE+, the input script has succeeded in resolving the conditions imposed by the output script and, therefore, the input is a valid authorization to spend the UTXO. If any result other than +TRUE+ remains after execution of the combined script, the input is invalid because it has failed to satisfy the spending conditions placed on the output. //SOMEDAY:implications of not being able to use script in input script [[p2pkh]] ==== Pay-to-Public-Key-Hash (P2PKH) ((("Pay-to-Public-Key-Hash (P2PKH)"))) A Pay-to-Public-Key-Hash or "P2PKH" script uses an output script that contains a hash which commits to a public key. P2PKH is best known as the basis for a legacy Bitcoin address. A P2PKH output can be spent by presenting a public key which matches the hash commitment and a digital signature created by the corresponding private key (see <>). Let's look at an example of a P2PKH output script: ---- OP_DUP OP_HASH160 OP_EQUALVERIFY OP_CHECKSIG ---- The +Key Hash+ is the data that would be encoded into a legacy Base58Check address. Most applications would show the _public key hash_ in a script using hexadecimal encoding and not the familiar Bitcoin address Base58Check format that begins with a "1." The preceding output script can be satisfied with an input script of the form: ---- ---- The two scripts together would form the following combined validation script: ---- OP_DUP OP_HASH160 OP_EQUALVERIFY OP_CHECKSIG ---- When executed, this combined script will evaluate to TRUE if, and only if, the input script matches the conditions set by the output script. In other words, the result will be TRUE if the input script has a valid signature from Bob's private key that corresponds to the public key hash set as an encumbrance. Figures pass:[#P2PubKHash1] and pass:[#P2PubKHash2] show (in two parts) a step-by-step execution of the combined script, which will prove this is a valid transaction.((("", startref="Tsript06")))((("", startref="Stransact06"))) [[P2PubKHash1]] .Evaluating a script for a P2PKH transaction (part 1 of 2) image::../images/mbc2_0605.png["Tx_Script_P2PubKeyHash_1"] [[P2PubKHash2]] .Evaluating a script for a P2PKH transaction (part 2 of 2) image::../images/mbc2_0606.png["Tx_Script_P2PubKeyHash_2"] [[multisig]] === Scripted multisignatures ((("transactions", "advanced", "multisignature scripts")))((("transactions", "advanced", id="Tadv07")))((("scripting", "multisignature scripts", id="Smulti07")))((("multisignature scripts")))Multisignature scripts set a condition where _k_ public keys are recorded in the script and at least _t_ of those must provide signatures to spend the funds. This is also known as a "M-of-N" scheme, where M is the total number of keys and N is the threshold of signatures required for validation. For example, a 2-of-3 multisignature is one where three public keys are listed as potential signers and at least two of those must be used to create signatures for a valid transaction to spend the funds. [TIP] ==== Some Bitcoin documentation, including earlier editions of this book, uses the term "m-of-n" for traditional multisignature. However, it's hard to tell "m" and "n" apart when they're spoken, so we use the alternative t-of-k. Both phrases refer to the same type of signature scheme. ==== At this time, Bitcoin Core's transaction relay policy limits multisignature output scripts to at most 3 listed public keys, meaning you can do anything from a 1-of-1 to a 3-of-3 multisignature or any combination within that range. You may want to check the +IsStandard()+ function to see what is currently accepted by the network. Note that the limit of 3 keys applies only to standard (also known as "bare") multisignature scripts, not to multisignature scripts wrapped in a Pay-to-Script-Hash (P2SH) script. P2SH multisignature scripts are limited by both policy and consensus to 15 keys, allowing for up to 15-of-15 multisignature. We will learn about P2SH in <>. All other scripts are consensus limited to 20 keys per +OP_CHECKMULTSIG+ or +OP_CHECKMULTISIGVERIFY+ opcode, although one script may include multiple of those opcodes. The general form of a output script setting a t-of-k multisignature condition is: ---- t ... k OP_CHECKMULTISIG ---- where _k_ is the total number of listed public keys and _t_ is the threshold of required signatures to spend the output. An output script setting a 2-of-3 multisignature condition looks like this: ---- 2 3 OP_CHECKMULTISIG ---- The preceding output script can be satisfied with an input script containing pairs of signatures and public keys: ---- ---- or any combination of two signatures from the private keys corresponding to the three listed public keys. The two scripts together would form the combined validation script: ---- 2 3 OP_CHECKMULTISIG ---- When executed, this combined script will evaluate to TRUE if, and only if, the input script script matches the conditions set by the output script. In this case, the condition is whether the input script has a valid signature from the two private keys that correspond to two of the three public keys set as an encumbrance. [[multisig_bug]] ==== An oddity in CHECKMULTISIG execution ((("scripting", "multisignature scripts", "OP_CHECKMULTISIG oddity")))((("OP_CHECKMULTISIG oddity workaround")))There is an oddity in ++OP_CHECKMULTISIG++'s execution that requires a slight workaround. When +OP_CHECKMULTISIG+ executes, it should consume K+N+2 items on the stack as parameters. However, due to the oddity, +OP_CHECKMULTISIG+ will pop an extra value or one value more than expected. Let's look at this in greater detail using the previous validation example: ---- 2 3 OP_CHECKMULTISIG ---- First, +OP_CHECKMULTISIG+ pops the top item, which is +N+ (in this example "3"). Then it pops +N+ items, which are the public keys that can sign. In this example, public keys A, B, and C. Then, it pops one item, which is +K+, the quorum (how many signatures are needed). Here M = 2. At this point, +OP_CHECKMULTISIG+ should pop the final +K+ items, which are the signatures, and see if they are valid. However, unfortunately, an oddity in the implementation causes +OP_CHECKMULTISIG+ to pop one more item (K+1 total) than it should. The extra item is called the _dummy stack element_ and it is disregarded when checking the signatures so it has no direct effect on +OP_CHECKMULTISIG+ itself. However, the dummy element must be present because, if it is not present, when +OP_CHECKMULTISIG+ attempts to pop on an empty stack, it will cause a stack error and script failure (marking the transaction as invalid). Because the dummy element is disregarded it can be anything, but it became the custom early on to use +OP_0+, which later became a relay policy rule and eventually a consensus rule (with the enforcement of BIP147). Because popping the dummy element is part of the consensus rules, it must now be replicated forever. Therefore a script should look like this: ---- OP_0 2 3 OP_CHECKMULTISIG ---- Thus the input script actually used in multisig is not: ---- ---- but instead it is: ---- OP_0 ---- Some people believe this oddity was a bug in the original code for Bitcoin, but a plausible alternative explanation exists. Verifying t-of-k signatures can require many more than t or k signature checking operations. Let's consider a simple example of 1-in-3, with the following combined script: ---- 1 5 OP_CHECKMULTISIG ---- The signature is checked first against +key0+, then +key1+, and then the other keys before it is finally compared to its corresponding +key4+. That means five signature checking operations need to be performed even though there's only one signature. One way to eliminate this redundancy would have been to provide OP_CHECKMULTISIG a map indicating which provided signature corresponds to which public key, allowing the OP_CHECKMULTISIG operation to only perform exactly K signature-checking operations. It's possible that Bitcoin's original developer added the extra element (which we now call the dummy stack element) in the original version of Bitcoin so that they could add the feature for allowing a map to be passed in a later soft fork. However, that feature was never implemented and the BIP147 update to the consensus rules in 2017 makes it impossible to add that feature in the future. Only Bitcoin's original developer could tell us whether the dummy stack element was the result of a bug or a plan for a future upgrade. In this book, we simply call it an oddity. From now on, if you see a multisig script, you should expect to see an extra +OP_0+ in the beginning, whose only purpose is as a workaround to an oddity in the consensus rules.((("", startref="Smulti07"))) [[p2sh]] === Pay-to-Script-Hash (P2SH) ((("transactions", "advanced", "Pay-to-Script-Hash")))((("scripting", "Pay-to-Script-Hash", id="Spay07")))Pay-to-Script-Hash (P2SH) was introduced in 2012 as a powerful new type of transaction that greatly simplifies the use of complex transaction scripts. To explain the need for P2SH, let's look at a practical example. ((("use cases", "import/export", id="mohamseven")))((("scripting", "Pay-to-Script-Hash", "import/export example")))((("Pay-to-Script-Hash (P2SH)", "import/export example"))) Mohammed is an electronics importer based in Dubai. Mohammed's company uses bitcoin's multisignature feature extensively for its corporate accounts. Multisignature scripts are one of the most common uses of bitcoin's advanced scripting capabilities and are a very powerful feature. ((("accounts receivable (AR)")))Mohammed's company uses a multisignature script for all customer payments, known in accounting terms as "accounts receivable," or AR. With the multisignature scheme, any payments made by customers are locked in such a way that they require at least two signatures to release, from Mohammed and one of his partners or from his attorney who has a backup key. A multisignature scheme like that offers corporate governance controls and protects against theft, embezzlement, or loss. The resulting script is quite long and looks like this: //FIXME:script match text with nesting ---- 2 5 OP_CHECKMULTISIG ---- Although multisignature scripts are a powerful feature, they are cumbersome to use. Given the preceding script, Mohammed would have to communicate this script to every customer prior to payment. Each customer would have to use special bitcoin wallet software with the ability to create custom transaction scripts, and each customer would have to understand how to create a transaction using custom scripts. Furthermore, the resulting transaction would be about five times larger than a simple payment transaction, because this script contains very long public keys. The burden of that extra data would be borne by the customer in the form of extra transaction fees. Finally, a large transaction script like this would be carried in the UTXO set in every full node, until it was spent. All of these issues make using complex output scripts difficult in practice. P2SH was developed to resolve these practical difficulties and to make the use of complex scripts as easy as a payment to a Bitcoin address. With P2SH payments, the complex script is replaced with a commitment, the digest of a cryptographic hash. When a transaction attempting to spend the UTXO is presented later, it must contain the script that matches the commitment in addition to the data which satisfies the script. In simple terms, P2SH means "pay to a script matching this hash, a script that will be presented later when this output is spent." ((("redeem scripts")))((("scripting", "redeem scripts")))In P2SH transactions, the script that is replaced by a hash is referred to as the _redeem script_ because it is presented to the system at redemption time rather than as an output script. <> shows the script without P2SH and <> shows the same script encoded with P2SH. [[without_p2sh]] .Complex script without P2SH |======= | Output script | 2 PubKey1 PubKey2 PubKey3 PubKey4 PubKey5 5 OP_CHECKMULTISIG | Input script | Sig1 Sig2 |======= [[with_p2sh]] .Complex script as P2SH |======= | Redeem script | 2 PubKey1 PubKey2 PubKey3 PubKey4 PubKey5 5 OP_CHECKMULTISIG | Output script | OP_HASH160 <20-byte hash of redeem script> OP_EQUAL | Input script | Sig1 Sig2 |======= As you can see from the tables, with P2SH the complex script that details the conditions for spending the output (redeem script) is not presented in the output script. Instead, only a hash of it is in the output script and the reedemScript itself is presented later, as part of the input script when the output is spent. This shifts the burden in fees and complexity from the sender to the recipient (spender) of the transaction. Let's look at Mohammed's company, the complex multisignature script, and the resulting P2SH scripts. First, the multisignature script that Mohammed's company uses for all incoming payments from customers: ---- 2 5 OP_CHECKMULTISIG ---- If the placeholders are replaced by actual public keys (shown here as 520-bit numbers starting with 04) you can see that this script becomes very long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his entire script can instead be represented by a 20-byte cryptographic hash, by first applying the SHA256 hashing algorithm and then applying the RIPEMD160 algorithm on the result. We use +libbitcoin-explorer+ (+bx+) on the command-line to produce the script hash, as follows: ---- echo \ 2 \ [04C16B8698A9ABF84250A7C3EA7EEDEF9897D1C8C6ADF47F06CF73370D74DCCA01CDCA79DCC5C395D7EEC6984D83F1F50C900A24DD47F569FD4193AF5DE762C587] \ [04A2192968D8655D6A935BEAF2CA23E3FB87A3495E7AF308EDF08DAC3C1FCBFC2C75B4B0F4D0B1B70CD2423657738C0C2B1D5CE65C97D78D0E34224858008E8B49] \ [047E63248B75DB7379BE9CDA8CE5751D16485F431E46117B9D0C1837C9D5737812F393DA7D4420D7E1A9162F0279CFC10F1E8E8F3020DECDBC3C0DD389D9977965] \ [0421D65CBD7149B255382ED7F78E946580657EE6FDA162A187543A9D85BAAA93A4AB3A8F044DADA618D087227440645ABE8A35DA8C5B73997AD343BE5C2AFD94A5] \ [043752580AFA1ECED3C68D446BCAB69AC0BA7DF50D56231BE0AABF1FDEEC78A6A45E394BA29A1EDF518C022DD618DA774D207D137AAB59E0B000EB7ED238F4D800] \ 5 CHECKMULTISIG \ | bx script-encode | bx sha256 | bx ripemd160 54c557e07dde5bb6cb791c7a540e0a4796f5e97e ---- The series of commands above first encodes Mohammed's multisig redeem script as a serialized hex-encoded bitcoin Script. The next +bx+ command calculates the SHA256 hash of that. The next +bx+ command hashes again with RIPEMD160, producing the final script-hash: The 20-byte hash of Mohammed's redeem script is: ---- 54c557e07dde5bb6cb791c7a540e0a4796f5e97e ---- A P2SH transaction locks the output to this hash instead of the longer redeem script, using a special output script template: ---- OP_HASH160 54c557e07dde5bb6cb791c7a540e0a4796f5e97e OP_EQUAL ---- which, as you can see, is much shorter. Instead of "pay to this 5-key multisignature script," the P2SH equivalent transaction is "pay to a script with this hash." A customer making a payment to Mohammed's company need only include this much shorter output script in his payment. When Mohammed and his partners want to spend this UTXO, they must present the original redeem script (the one whose hash locked the UTXO) and the signatures necessary to unlock it, like this: ---- <2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG> ---- The two scripts are combined in two stages. First, the redeem script is checked against the output script to make sure the hash matches: ---- <2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG> OP_HASH160 OP_EQUAL ---- If the redeem script hash matches, the redeem script is executed: ---- 2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG ---- ==== P2SH Addresses ((("scripting", "Pay-to-Script-Hash", "addresses")))((("Pay-to-Script-Hash (P2SH)", "addresses")))((("bitcoin improvement proposals", "Address Format for P2SH (BIP13)")))Another important part of the P2SH feature is the ability to encode a script hash as an address, as defined in BIP13. P2SH addresses are Base58Check encodings of the 20-byte hash of a script, just like Bitcoin addresses are Base58Check encodings of the 20-byte hash of a public key. P2SH addresses use the version prefix "5," which results in Base58Check-encoded addresses that start with a "3." For example, Mohammed's complex script, hashed and Base58Check-encoded as a P2SH address, becomes +39RF6JqABiHdYHkfChV6USGMe6Nsr66Gzw+. We can confirm that with the +bx+ command: ---- echo \ '54c557e07dde5bb6cb791c7a540e0a4796f5e97e'\ | bx address-encode -v 5 39RF6JqABiHdYHkfChV6USGMe6Nsr66Gzw ---- Now, Mohammed can give this "address" to his customers and they can use almost any Bitcoin wallet to make a simple payment, like any other Bitcoin address. The 3 prefix gives them a hint that this is a special type of address, one corresponding to a script instead of a public key, but otherwise it works in exactly the same way as a payment to any other Bitcoin address. P2SH addresses hide all of the complexity so that the person making a payment does not see the script. ==== Benefits of P2SH ((("scripting", "Pay-to-Script-Hash", "benefits of")))((("Pay-to-Script-Hash (P2SH)", "benefits of")))The P2SH feature offers the following benefits compared to the direct use of complex scripts in outputs: - Complex scripts are replaced by shorter commitments in the transaction output, making the transaction smaller. - The similarity to original legacy addresses means the sender and the sender's wallet don't need complex engineering to implement P2SH. - P2SH shifts the burden of constructing the script to the recipient, not the sender. - P2SH shifts the burden in data storage for the long script from the output (which additionally to being stored on the blockchain is in the UTXO set) to the input (only stored on the blockchain). - P2SH shifts the burden in data storage for the long script from the present time (payment) to a future time (when it is spent). - P2SH shifts the transaction fee cost of a long script from the sender to the recipient, who has to include the long redeem script to spend it. ==== Redeem Script and Validation You are not able to put a P2SH inside a P2SH redeem script, because the P2SH specification is not recursive. Also, while it is technically possible to include +OP_RETURN+ (see <>) in a redeem script, as nothing in the rules prevents you from doing so, it is of no practical use because executing +OP_RETURN+ during validation will cause the transaction to be marked invalid. Note that because the redeem script is not presented to the network until you attempt to spend a P2SH output, if you create an output with the hash of an invalid redeem script, you will not be able to spend it. The spending transaction, which includes the redeem script, will not be accepted because it is an invalid script. This creates a risk, because you can send bitcoin to a P2SH address that cannot be spent later. [WARNING] ==== ((("warnings and cautions", "accidental bitcoin invalidation")))P2SH output scripts contain the hash of a redeem script, which gives no clues as to the content of the redeem script. The P2SH transaction will be considered valid and accepted even if the redeem script is invalid. You might accidentally receive bitcoin in such a way that it cannot later be spent. ==== [[op_return]] === Data Recording Output (OP_RETURN) ((("transactions", "advanced", "data recording output")))((("scripting", "data recording output")))((("OP_RETURN operator")))((("data recording (nonpayment data)")))((("nonpayment data")))((("blockchain (the)", "nonpayment data recording")))((("digital notary services")))Bitcoin's distributed and timestamped ledger, the blockchain, has potential uses beyond payments. Many developers have tried to use the transaction scripting language to take advantage of the security and resilience of the system for applications such as digital notary services and smart contracts. Early attempts to use bitcoin's script language for these purposes involved creating transaction outputs that recorded data on the blockchain; for example, to record a digital fingerprint of a file in such a way that anyone could establish proof-of-existence of that file on a specific date by reference to that transaction. ((("blockchain bloat")))((("bloat")))((("unspent transaction outputs (UTXO)")))((("UTXO sets")))The use of bitcoin's blockchain to store data unrelated to bitcoin payments is a controversial subject. Many people consider such use abusive and want to discourage it. Others view it as a demonstration of the powerful capabilities of blockchain technology and want to encourage such experimentation. Those who object to the inclusion of nonpayment data argue that it causes "blockchain bloat," burdening those running full Bitcoin nodes with carrying the cost of disk storage for data that the blockchain was not intended to carry. Moreover, such transactions create UTXOs that cannot be spent, using the destination legacy Bitcoin address as a freeform 20-byte field. Because the address is used for data, it doesn't correspond to a private key and the resulting UTXO can _never_ be spent; it's a fake payment. These transactions that can never be spent are therefore never removed from the UTXO set and cause the size of the UTXO database to forever increase, or "bloat." A compromise was reached that allows an output script starting with +OP_RETURN+ to add nonpayment data to a transaction output. However, unlike the use of "fake" UTXOs, the +OP_RETURN+ operator creates an explicitly _provably unspendable_ output, which does not need to be stored in the UTXO set. +OP_RETURN+ outputs are recorded on the blockchain, so they consume disk space and contribute to the increase in the blockchain's size, but they are not stored in the UTXO set and therefore do not bloat full nodes with the cost of more expensive database operations. +OP_RETURN+ scripts look like this: ---- OP_RETURN ---- ((("Proof of Existence")))((("DOCPROOF prefix")))The data portion often represents a hash, such as the output from the SHA256 algorithm (32 bytes). Some applications put a prefix in front of the data to help identify the application. For example, the http://proofofexistence.com[Proof of Existence] digital notarization service uses the 8-byte prefix +DOCPROOF+, which is ASCII encoded as +44 4f 43 50 52 4f 4f 46+ in hexadecimal. Keep in mind that there is no input script that corresponds to +OP_RETURN+ that could possibly be used to "spend" an +OP_RETURN+ output. The whole point of an +OP_RETURN+ output is that you can't spend the money locked in that output, and therefore it does not need to be held in the UTXO set as potentially spendable: +OP_RETURN+ outputs are _provably unspendable_. +OP_RETURN+ outputs usually have a zero amount, because any bitcoins assigned to such an output is effectively lost forever. If an +OP_RETURN+ output is referenced as an input in a transaction, the script validation engine will halt the execution of the validation script and mark the transaction as invalid. The execution of +OP_RETURN+ essentially causes the script to "RETURN" with a +FALSE+ and halt. Thus, if you accidentally reference a +OP_RETURN+ output as an input in a transaction, that transaction is invalid. [[lock_time_limitations]] ==== Transaction lock time limitations Use of the lock time allows a spender to restrict a transaction from being included in a block until a specific block height, but it does not prevent spending the funds in another transaction earlier than that. Let's explain that with the following example. ((("use cases", "buying coffee", id="alicesseven")))Alice signs a transaction spending one of her outputs to Bob's address, and sets the transaction lock time to 3 months in the future. Alice sends that transaction to Bob to hold. With this transaction Alice and Bob know that: * Bob cannot transmit the transaction to redeem the funds until 3 months have elapsed. * Bob may transmit the transaction after 3 months. However: * Alice can create another transaction, double-spending the same inputs without a lock time. Thus, Alice can spend the same UTXO before the 3 months have elapsed. * Bob has no guarantee that Alice won't do that. It is important to understand the limitations of transaction lock time. The only guarantee is that Bob will not be able to redeem the presigned transaction before 3 months have elapsed. There is no guarantee that Bob will get the funds. To guarantee that Bob will receive the funds but cannot spend them until 3 months have elapsed, the timelock restriction must be placed on the UTXO itself and be part of the script, rather than on the transaction. This is achieved by the next form of timelock, called Check Lock Time Verify. ==== Check Lock Time Verify (OP_CLTV) ((("Check Lock Time Verify (OP_CLTV)", id="cltv07")))((("timelocks", "Check Lock Time Verify (OP_CLTV)")))((("scripting", "timelocks", "Check Lock Time Verify (OP_CLTV)")))((("bitcoin improvement proposals", "OP_CHECKLOCKTIMEVERIFY (BIP65)")))In December 2015, a new form of timelock was introduced to Bitcoin as a soft fork upgrade. Based on a specification in BIP65, a new script operator called _OP_CHECKLOCKTIMEVERIFY_ (_CLTV_) was added to the scripting language. +OP_CLTV+ is a per-output timelock, rather than a per-transaction timelock as is the case with lock time. This allows for much greater flexibility in the way timelocks are applied. In simple terms, by committing to the +OP_CLTV+ opcode in an output, that output is restricted so that it can only be spent after the specified time has elapsed. +OP_CLTV+ doesn't replace lock time, but rather restricts specific UTXOs such that they can only be spent in a future transaction with lock time set to a greater or equal value. The +OP_CLTV+ opcode takes one parameter as input, expressed as a number in the same format as lock time (either a block height or Unix epoch time). As indicated by the +VERIFY+ suffix, +OP_CLTV+ is the type of opcode that halts execution of the script if the outcome is +FALSE+. If it results in TRUE, execution continues. In order to use +OP_CLTV+, you insert it into the redeem script of the output in the transaction that creates the output. For example, if Alice is paying Bob's address, the output would normally contain a P2PKH script like this: ---- OP_DUP OP_HASH160 OP_EQUALVERIFY OP_CHECKSIG ---- To lock it to a time, say 3 months from now, the transaction would be a P2SH transaction with a redeem script like this: ---- OP_CHECKLOCKTIMEVERIFY OP_DROP OP_DUP OP_HASH160 OP_EQUALVERIFY OP_CHECKSIG ---- where ++ is a block height or time value estimated 3 months from the time the transaction is mined: current block height {plus} 12,960 (blocks) or current Unix epoch time {plus} 7,760,000 (seconds). For now, don't worry about the +OP_DROP+ opcode that follows +OP_CHECKLOCKTIMEVERIFY+; it will be explained shortly. When Bob tries to spend this UTXO, he constructs a transaction that references the UTXO as an input. He uses his signature and public key in the input script of that input and sets the transaction lock time to be equal or greater to the timelock in the +OP_CHECKLOCKTIMEVERIFY+ Alice set. Bob then broadcasts the transaction on the Bitcoin network. Bob's transaction is evaluated as follows. If the +OP_CHECKLOCKTIMEVERIFY+ parameter Alice set is less than or equal the spending transaction's lock time, script execution continues (acts as if a _no operation_ or OP_NOP opcode was executed). Otherwise, script execution halts and the transaction is deemed invalid. More precisely, +OP_CHECKLOCKTIMEVERIFY+ fails and halts execution, marking the transaction invalid if (source: BIP65): 1. the stack is empty; or 2. the top item on the stack is less than 0; or 3. the lock-time type (height versus timestamp) of the top stack item and the lock time field are not the same; or 4. the top stack item is greater than the transaction's lock time field; or 5. the sequence field of the input is 0xffffffff. [[timelock_conflicts]] .Timelock conflicts [WARNING] ==== +OP_CLTV+ and lock time use the same format to describe timelocks, either a block height or the time elapsed in seconds since Unix epoch. Critically, when used together, the format of lock time must match that of +OP_CLTV+ in the outputs--they must both reference either block height or time in seconds. The above implies that a script can never be valid if it must execute two different calls to +OP_CLTV+, one which uses a height and one which uses a time. It can be easy to make this mistake when writing advanced scripts, so be sure to thoroughly test your scripts on a test network or use a tool designed to prevent this issue, like a Miniscript compiler. An additional implication is that only one variety of +OP_CLTV+ can be used in any of the scripts of a transaction. If the script for one input uses the height variety and a different script for a different input uses the time variety, there is no way to construct a valid transaction that spends both inputs. ==== After execution, if +OP_CLTV+ is satisfied, the parameter that preceded it remains as the top item on the stack and may need to be dropped, with +OP_DROP+, for correct execution of subsequent script opcodes. You will often see +OP_CHECKLOCKTIMEVERIFY+ followed by +OP_DROP+ in scripts for this reason. +OP_CLTV+, like +OP_CSV+ (see <>) are unlike other +CHECKVERIFY+ opcodes in leaving items on the stack because the soft forks that added them redefined existing opcodes that did not drop stack items, and the behavior of those previous no-operation (NOP) opcodes must be preserved. By using lock time in conjunction with +OP_CLTV+, the scenario described in <> changes. Alice sends her transaction immediately, assigning the funds to Bob’s key. Alice can no longer spend the money, but Bob cannot spend it before the 3-month lock time has expired. By introducing timelock functionality directly into the scripting language, +OP_CLTV+ allows us to develop some very interesting complex scripts.((("", startref="cltv07"))) The standard is defined in https://github.com/bitcoin/bips/blob/master/bip-0065.mediawiki[BIP65 (OP_CHECKLOCKTIMEVERIFY)]. ==== Relative Timelocks Lock time and +OP_CLTV+ are ((("timelocks", "relative timelocks", id="Trelative07")))((("scripting", "timelocks", "relative timelocks")))((("relative timelocks", id="relativetime07")))both _absolute timelocks_ in that they specify an absolute point in time. The next two timelock features we will examine are _relative timelocks_ in that they specify, as a condition of spending an output, an elapsed time from the confirmation of the output in the blockchain. Relative timelocks are useful because they allow imposing a time constraint on one transaction that is dependent on the elapsed time from the confirmation of a previous transaction. In other words, the clock doesn't start counting until the UTXO is recorded on the blockchain. This functionality is especially useful in bidirectional state channels and Lightning Networks, as we will see in <>. Relative timelocks, like absolute timelocks, are implemented with both a transaction-level feature and a script-level opcode. The transaction-level relative timelock is implemented as a consensus rule on the value of +sequence+, a transaction field that is set in every transaction input. Script-level relative timelocks are implemented with the +OP_CHECKSEQUENCEVERIFY+ (OP_CSV) opcode. ((("bitcoin improvement proposals", "Relative lock-time using consensus-enforced sequence numbers (BIP68)")))((("bitcoin improvement proposals", "CHECKSEQUENCEVERIFY (BIP112)")))Relative timelocks are implemented according to the specifications in https://github.com/bitcoin/bips/blob/master/bip-0068.mediawiki[BIP68, Relative lock-time using consensus-enforced sequence numbers] and https://github.com/bitcoin/bips/blob/master/bip-0112.mediawiki[BIP112, OP_CHECKSEQUENCEVERIFY]. BIP68 and BIP112 were activated in May 2016 as a soft fork upgrade to the consensus rules. ==== Relative Timelocks with OP_CSV ((("scripting", "timelocks", "relative timelocks with CHECKSEQUENCEVERIFY")))((("CHECKSEQUENCEVERIFY (CSV)")))Just like OP_CLTV and lock time, there is a script opcode for relative timelocks that leverages the sequence value in scripts. That opcode is +OP_CHECKSEQUENCEVERIFY+, commonly referred to as +OP_CSV+ for short. The +OP_CSV+ opcode when evaluated in an UTXO's script allows spending only in a transaction whose input sequence value is greater than or equal to the +OP_CSV+ parameter. Essentially, this restricts spending the UTXO until a certain number of blocks or seconds have elapsed relative to the time the UTXO was mined. As with CLTV, the value in +OP_CSV+ must match the format in the corresponding sequence value. If +OP_CSV+ is specified in terms of blocks, then so must sequence. If +OP_CSV+ is specified in terms of seconds, then so must sequence. [WARNING] ==== A script executing multiple +OP_CSV+ opcodes must only use the same variety, either time-based or height-based. Mixing varieties will produce an invalid script that can never be spent, the same problem we saw with +OP_CLTV+ in <>. However, +OP_CSV+ allows any two valid inputs to be included in the same transaction, so the problem of interaction across inputs that occurs with +OP_CLTV+ doesn't affect +OP_CSV+. ==== Relative timelocks with +OP_CSV+ are especially useful when several (chained) transactions are created and signed, but not propagated--that is, they're kept off the blockchain (_offchain_). A child transaction cannot be used until the parent transaction has been propagated, mined, and aged by the time specified in the relative timelock. One application of this use case can be seen in <> and <>.((("", startref="relativetime07")))((("", startref="Trelative07"))) +OP_CSV+ is defined in detail in https://github.com/bitcoin/bips/blob/master/bip-0112.mediawiki[BIP112, CHECKSEQUENCEVERIFY]. === Scripts with Flow Control (Conditional Clauses) ((("transactions", "advanced", "flow control scripts")))((("scripting", "flow control scripts", id="Sflow07")))((("conditional clauses", id="condition07")))((("flow control", id="flow07")))One of the more powerful features of Bitcoin Script is flow control, also known as conditional clauses. You are probably familiar with flow control in various programming languages that use the construct +IF...THEN...ELSE+. Bitcoin conditional clauses look a bit different, but are essentially the same construct. At a basic level, bitcoin conditional opcodes allow us to construct a script that has two ways of being unlocked, depending on a +TRUE+/+FALSE+ outcome of evaluating a logical condition. For example, if x is +TRUE+, the executed code path is A and the ELSE code path is B. Additionally, bitcoin conditional expressions can be "nested" indefinitely, meaning that a conditional clause can contain another within it, which contains another, etc. Bitcoin Script flow control can be used to construct very complex scripts with hundreds of possible execution paths. There is no limit to nesting, but consensus rules impose a limit on the maximum size of a script in bytes. Bitcoin implements flow control using the +OP_IF+, +OP_ELSE+, +OP_ENDIF+, and +OP_NOTIF+ opcodes. Additionally, conditional expressions can contain boolean operators such as +OP_BOOLAND+, +OP_BOOLOR+, and +OP_NOT+. At first glance, you may find the bitcoin's flow control scripts confusing. That is because Bitcoin Script is a stack language. The same way that +1 {plus} 1+ looks "backward" when expressed as +1 1 OP_ADD+, flow control clauses in bitcoin also look "backward." In most traditional (procedural) programming languages, flow control looks like this: .Pseudocode of flow control in most programming languages ---- if (condition): code to run when condition is true else: code to run when condition is false endif code to run in either case ---- In a stack-based language like Bitcoin Script, the logical condition comes before the +IF+, which makes it look "backward": .Bitcoin Script flow control ---- condition IF code to run when condition is true OP_ELSE code to run when condition is false OP_ENDIF code to run in either case ---- When reading Bitcoin Script, remember that the condition being evaluated comes _before_ the +IF+ opcode. ==== Conditional Clauses with VERIFY Opcodes ((("VERIFY opcodes")))((("IF clauses")))((("opcodes", "VERIFY")))Another form of conditional in Bitcoin Script is any opcode that ends in +VERIFY+. The +VERIFY+ suffix means that if the condition evaluated is not +TRUE+, execution of the script terminates immediately and the transaction is deemed invalid. ((("guard clauses")))Unlike an +IF+ clause, which offers alternative execution paths, the +VERIFY+ suffix acts as a _guard clause_, continuing only if a precondition is met. For example, the following script requires Bob's signature and a pre-image (secret) that produces a specific hash. Both conditions must be satisfied to unlock: .A script with an +OP_EQUALVERIFY+ guard clause. ---- OP_HASH160 OP_EQUALVERIFY OP_CHECKSIG ---- To spend this, Bob must present a valid pre-image and a signature: .Satisfying the above script ---- ---- Without presenting the pre-image, Bob can't get to the part of the script that checks for his signature. [role="pagebreak-after"] This script can be written with an +OP_IF+ instead: .A script with an +IF+ guard clause ---- OP_HASH160 OP_EQUAL OP_IF OP_CHECKSIG OP_ENDIF ---- Bob's authentication data is identical: .Satisfying the above script ---- ---- The script with +OP_IF+ does the same thing as using an opcode with a +VERIFY+ suffix; they both operate as guard clauses. However, the +VERIFY+ construction is more efficient, using two fewer opcodes. So, when do we use +VERIFY+ and when do we use +OP_IF+? If all we are trying to do is to attach a precondition (guard clause), then +VERIFY+ is better. If, however, we want to have more than one execution path (flow control), then we need an +OP_IF...OP_ELSE+ flow control clause. ==== Using Flow Control in Scripts A very common use for flow control in Bitcoin Script is to construct a script that offers multiple execution paths, each a different way of redeeming the UTXO. ((("use cases", "buying coffee")))Let's look at a simple example, where we have two signers, Alice and Bob, and either one is able to redeem. With multisig, this would be expressed as a 1-of-2 multisig script. For the sake of demonstration, we will do the same thing with an +OP_IF+ clause: ---- OP_IF OP_ELSE OP_ENDIF OP_CHECKSIG ---- Looking at this redeem script, you may be wondering: "Where is the condition? There is nothing preceding the +IF+ clause!" The condition is not part of the script. Instead, the condition will be offered at spending time, allowing Alice and Bob to "choose" which execution path they want. .Alice satisfies the above script: ---- OP_TRUE ---- The +OP_TRUE+ at the end serves as the condition (+TRUE+) that will make the +OP_IF+ clause execute the fist redemption path. This conditions puts the public key on the stack for which Alice has a signature. The +OP_TRUE+ opcode, also known as +OP_1+, will put the number 1 on the stack. For Bob to redeem this, he would have to choose the second execution path in +OP_IF+ by giving a +FALSE+ value. The +OP_FALSE+ opcode, also known as +OP_0+, pushes an empty byte array to the stack. ---- OP_FALSE ---- Bob's input script causes the +OP_IF+ clause to execute the second (+OP_ELSE+) script, which requires Bob's signature. Since +OP_IF+ clauses can be nested, we can create a "maze" of execution paths. The input script can provide a "map" selecting which execution path is actually executed: ---- OP_IF subscript A OP_ELSE OP_IF subscript B OP_ELSE subscript C OP_ENDIF OP_ENDIF ---- In this scenario, there are three execution paths (+subscript A+, +subscript B+, and +subscript C+). The input script provides a path in the form of a sequence of +TRUE+ or +FALSE+ values. To select path +subscript B+, for example, the input script must end in +OP_1 OP_0+ (+TRUE+, +FALSE+). These values will be pushed onto the stack, so that the second value (+FALSE+) ends up at the top of the stack. The outer +OP_IF+ clause pops the +FALSE+ value and executes the first +OP_ELSE+ clause. Then the +TRUE+ value moves to the top of the stack and is evaluated by the inner (nested) +OP_IF+, selecting the +B+ execution path. Using this construct, we can build redeem scripts with tens or hundreds of execution paths, each offering a different way to redeem the UTXO. To spend, we construct an input script that navigates the execution path by putting the appropriate +TRUE+ and +FALSE+ values on the stack at each flow control point.((("", startref="Sflow07")))((("", startref="flow07")))((("", startref="condition07"))) === Complex Script Example ((("transactions", "advanced", "example")))((("scripting", "complex script example", id="Scomplex07")))In this section we combine many of the concepts from this chapter into a single example. ((("use cases", "import/export", id="mohamseventwo")))Our example uses the story of Mohammed, the company owner in Dubai who is operating an import/export business. ((("transactions", "advanced", "multisignature scripts")))((("scripting", "multisignature scripts", "import/export example")))((("multisignature scripts")))In this example, Mohammed wishes to construct a company capital account with flexible rules. The scheme he creates requires different levels of authorization depending on timelocks. The participants in the multisig scheme are Mohammed, his two partners Saeed and Zaira, and their company lawyer Abdul. The three partners make decisions based on a majority rule, so two of the three must agree. However, in the case of a problem with their keys, they want their lawyer to be able to recover the funds with one of the three partner signatures. Finally, if all partners are unavailable or incapacitated for a while, they want the lawyer to be able to manage the account directly after he gains access to the capital account's transaction records. Here's the redeem script that Mohammed designs to achieve this (line number prefixed as XX): [[variable_timelock_multisig]] .Variable Multi-Signature with Timelock ==== ---- 01 OP_IF 02 OP_IF 03 2 04 OP_ELSE 05 <30 days> OP_CHECKSEQUENCEVERIFY OP_DROP 06 OP_CHECKSIG 07 1 08 OP_ENDIF 09 3 OP_CHECKMULTISIG 10 OP_ELSE 11 <90 days> OP_CHECKSEQUENCEVERIFY OP_DROP 12 OP_CHECKSIG 13 OP_ENDIF ---- ==== Mohammed's script implements three execution paths using nested +OP_IF...OP_ELSE+ flow control clauses. In the first execution path, this script operates as a simple 2-of-3 multisig with the three partners. This execution path consists of lines 3 and 9. Line 3 sets the quorum of the multisig to +2+ (2-of-3). This execution path can be selected by putting +OP_TRUE OP_TRUE+ at the end of the input script: .Spending data for the first execution path (2-of-3 multisig) ---- OP_0 OP_TRUE OP_TRUE ---- [TIP] ==== The +OP_0+ at the beginning of this input script is because of an oddity in +OP_CHECKMULTISIG+ that pops an extra value from the stack. The extra value is disregarded by the +OP_CHECKMULTISIG+, but it must be present or the script fails. Pushing an empty byte array with +OP_0+ is a workaround to the oddity, as described in <>. ==== The second execution path can only be used after 30 days have elapsed from the creation of the UTXO. At that time, it requires the signature of Abdul the lawyer and one of the three partners (a 1-of-3 multisig). This is achieved by line 7, which sets the quorum for the multisig to +1+. To select this execution path, the input script would end in +OP_FALSE OP_TRUE+: .Spending data for the second execution path (Lawyer + 1-of-3) ---- OP_0 OP_FALSE OP_TRUE ---- [TIP] ==== Why +OP_FALSE OP_TRUE+? Isn't that backward? +FALSE+ is pushed onto the stack and +TRUE+ is pushed on top of it. +TRUE+ is therefore popped _first_ by the first +OP_IF+ opcode. ==== Finally, the third execution path allows Abdul the lawyer to spend the funds alone, but only after 90 days. To select this execution path, the input script has to end in +OP_FALSE+: .Input script for the third execution path (Lawyer only) ---- OP_FALSE ---- Try running the script on paper to see how it behaves on the stack. ==== Segregated Witness Output and Transaction Examples Let’s look at some of our example transactions and see how they would change with Segregated Witness. We’ll first look at how a Pay-to-Public-Key-Hash (P2PKH) payment can be accomplished as the Segregated Witness program. Then, we’ll look at the Segregated Witness equivalent for Pay-to-Script-Hash (P2SH) scripts. Finally, we’ll look at how both of the preceding Segregated Witness programs can be embedded inside a P2SH script. [[p2wpkh]] ===== Pay-to-Witness-Public-Key-Hash (P2WPKH) Let's start by looking at the example of a P2PKH output script: .Example P2PKH output script ---- OP_DUP OP_HASH160 ab68025513c3dbd2f7b92a94e0581f5d50f654e7 OP_EQUALVERIFY OP_CHECKSIG ---- With Segregated Witness, Alice would create a Pay-to-Witness-Public-Key-Hash (P2WPKH) script. If that script commits to the same public key, it would look like this: .Example P2WPKH output script ---- 0 ab68025513c3dbd2f7b92a94e0581f5d50f654e7 ---- As you can see, a P2WPKH output script is much simpler than the P2PKH equivalent. It consists of two values that are pushed on to the script evaluation stack. To an old (nonsegwit-aware) Bitcoin client, the two pushes would look like an output that anyone can spend. To a newer, segwit-aware client, the first number (0) is interpreted as a version number (the _witness version_) and the second part (20 bytes) is a _witness program_. The 20-byte witness program is simply the hash of the public key, as in a P2PKH script Now, let’s look at the corresponding transaction that Bob uses to spend this output. For the original script, the spending transaction would have to include a signature within the transaction input: .Decoded transaction showing a P2PKH output being spent with a signature ---- [...] "vin" : [ "txid": "abcdef12345...", "vout": 0, "scriptSig": “”, ] [...] ---- However, to spend the P2WPKH output, the transaction has no signature on that input. Instead, Bob’s transaction has an empty input script and includes a witness structure: .Decoded transaction showing a P2WPKH output being spent with a witness structure ---- [...] "vin" : [ "txid": "abcdef12345...", "vout": 0, "scriptSig": “”, ] [...] “witness”: “” [...] ---- ===== Wallet construction of P2WPKH It is extremely important to note that P2WPKH witness programs should only be created by the payee (recipient) and not converted by the sender from a known public key, P2PKH script, or address. The sender has no way of knowing if the recipient's wallet has the ability to construct segwit transactions and spend P2WPKH outputs. Additionally, P2WPKH outputs must be constructed from the hash of a _compressed_ public key. Uncompressed public keys are nonstandard in segwit and may be explicitly disabled by a future soft fork. If the hash used in the P2WPKH came from an uncompressed public key, it may be unspendable and you may lose funds. P2WPKH outputs should be created by the payee's wallet by deriving a compressed public key from their private key. [WARNING] ==== P2WPKH should be constructed by the recipient by converting a compressed public key to a P2WPKH hash. Neither the spender nor anyone else should ever transform a P2PKH script, Bitcoin address, or uncompressed public key to a P2WPKH witness script. In general, a spender should only send to the receiver in the manner that the receiver indicated. ==== [[p2wsh]] ===== Pay-to-Witness-Script-Hash (P2WSH) The ((("use cases", "import/export", id="mohamappd")))second type of segwit v0 witness program corresponds to a Pay-to-Script-Hash (P2SH) script. We saw this type of script in <>. In that example, P2SH was used by Mohammed's company to express a multisignature script. Payments to Mohammed's company were encoded with a script like this: .Example P2SH output script ---- OP_HASH160 54c557e07dde5bb6cb791c7a540e0a4796f5e97e OP_EQUAL ---- This P2SH script references the hash of a _redeem script_ that defines a 2-of-3 multisignature requirement to spend funds. To spend this output, Mohammed's company would present the redeem script (whose hash matches the script hash in the P2SH output) and the signatures necessary to satisfy that redeem script, all inside the transaction input: .Decoded transaction showing a P2SH output being spent ---- [...] "vin" : [ "txid": "abcdef12345...", "vout": 0, "scriptSig": “ <2 PubA PubB PubC PubD PubE 5 OP_CHECKMULTISIG>”, ] ---- Now, let's look at how this entire example would be upgraded to segwit v0. If Mohammed's customers were using a segwit-compatible wallet, they would make a payment, creating a Pay-to-Witness-Script-Hash (P2WSH) output that would look like this: .Example P2WSH output script ---- 0 a9b7b38d972cabc7961dbfbcb841ad4508d133c47ba87457b4a0e8aae86dbb89 ---- Again, as with the example of P2WPKH, you can see that the Segregated Witness equivalent script is a lot simpler and reduces the template overhead that you see in P2SH scripts. Instead, the Segregated Witness output script consists of two values pushed to the stack: a witness version (0) and the 32-byte SHA256 hash of the witness script (the witness program). [TIP] ==== While P2SH uses the 20-byte +RIPEMD160(SHA256(script))+ hash, the P2WSH witness program uses a 32-byte +SHA256(script)+ hash. This difference in the selection of the hashing algorithm is deliberate to provide stronger security to P2WSH in certain use cases (128 bits of security in P2WSH versus 80 bits of security in P2SH). For details, see <>. ==== Mohammed's company can spend the P2WSH output by presenting the correct witness script and sufficient signatures to satisfy it. The witness script and the signatures would be included as part of the witness structure. No data would be placed in the input script because this is a native witness program, which does not use the legacy input script field. .Decoded transaction showing a P2WSH output being spent with witness structure ---- [...] "vin" : [ "txid": "abcdef12345...", "vout": 0, "scriptSig": “”, ] [...] “witness”: “ <2 PubA PubB PubC PubD PubE 5 OP_CHECKMULTISIG>” [...] ---- ===== Differentiating between P2WPKH and P2WSH In the previous two sections, we demonstrated two types of witness programs: <> and <>. Both types of witness programs consist of the same version number followed by a data push. They look very similar, but are interpreted very differently: one is interpreted as a public key hash, which is satisfied by a signature and the other as a script hash, which is satisfied by a witness script. The critical difference between them is the length of the witness program: - The witness program in P2WPKH is 20 bytes - The witness program in P2WSH is 32 bytes This is the one difference that allows a full node to differentiate between the two types of witness programs. By looking at the length of the hash, a node can determine what type of witness program it is, P2WPKH or P2WSH. ==== Upgrading to Segregated Witness As we can see from the previous examples, upgrading to Segregated Witness is a two-step process. First, wallets must create segwit type outputs. Then, these outputs can be spent by wallets that know how to construct Segregated Witness transactions. In the examples, Alice's wallet is able to create outputs paying Segregated Witness output scripts. Bob's wallet is also segwit-aware and able to spend those outputs. Segregated Witness was implemented as a backward-compatible upgrade, where _old and new clients can coexist_. Wallet developers independently upgraded wallet software to add segwit capabilities. Legacy P2PKH and P2SH continue to work for nonupgraded wallets. That leaves two important scenarios, which are addressed in the next section: - Ability of a sender's wallet that is not segwit-aware to make a payment to a recipient's wallet that can process segwit transactions. - Ability of a sender's wallet that is segwit-aware to recognize and distinguish between recipients that are segwit-aware and ones that are not, by their _addresses_. ===== Embedding Segregated Witness inside P2SH Let's assume, for example, that Alice's wallet is not upgraded to segwit, but Bob's wallet is upgraded and can handle segwit transactions. Alice and Bob can use legacy non-segwit outputs. But Bob would likely want to use segwit to reduce transaction fees, taking advantage of the reduced cost of witness structure. In this case Bob's wallet can construct a P2SH address that contains a segwit script inside it. Alice's wallet sees this as a "normal" P2SH address and can make payments to it without any knowledge of segwit. Bob's wallet can then spend this payment with a segwit transaction, taking advantage of segwit and reducing transaction fees. Both forms of witness scripts, P2WPKH and P2WSH, can be embedded in a P2SH address. The first is noted as nested P2WPKH and the second is noted as nested P2WSH. ===== Nested Pay-to-Witness-Public-Key-Hash The first form of output script we will examine is nested P2WPKH. This is a Pay-to-Witness-Public-Key-Hash witness program, embedded inside a Pay-to-Script-Hash script, so that a wallet that is not aware of segwit can pay the output script. Bob's wallet constructs a P2WPKH witness program with Bob's public key. This witness program is then hashed and the resulting hash is encoded as a P2SH script. The P2SH script is converted to a Bitcoin address, one that starts with a "3," as we saw in the <> section. Bob's wallet starts with the P2WPKH witness version and witness program we saw earlier: .Bob's P2WPKH witness version and witness program ---- 0 ab68025513c3dbd2f7b92a94e0581f5d50f654e7 ---- The data consists of the witness version and Bob's 20-byte public key hash. Bob's wallet then hashes the data, first with SHA256, then with RIPEMD160, producing another 20-byte hash. Let's use +bx+ on the command-line to replicate that: .HASH160 of the P2WPKH witness program ---- echo \ '0 [ab68025513c3dbd2f7b92a94e0581f5d50f654e7]'\ | bx script-encode | bx sha256 | bx ripemd160 3e0547268b3b19288b3adef9719ec8659f4b2b0b ---- Next, the redeem script hash is converted to a Bitcoin address. Let's use +bx+ on the command-line again: .P2SH address ---- echo \ '3e0547268b3b19288b3adef9719ec8659f4b2b0b' \ | bx address-encode -v 5 37Lx99uaGn5avKBxiW26HjedQE3LrDCZru ---- Now, Alice's wallet can make a payment to +37Lx99uaGn5avKBxiW26HjedQE3LrDCZru+, just as it would to any other Bitcoin address. To pay Bob, Alice's wallet would lock the output with a P2SH script: ---- OP_HASH160 3e0547268b3b19288b3adef9719ec8659f4b2b0b OP_EQUAL ---- Even though Alice's wallet has no support for segwit, the payment it creates can be spent by Bob with a segwit transaction.((("", startref="aliced"))) ===== Nested Pay-to-Witness-Script-Hash Similarly, a P2WSH witness program for a multisig script or other complicated script can be embedded inside a P2SH script and address, making it possible for any wallet to make payments that are segwit compatible. As we saw in <>, Mohammed's ((("use cases", "import/export")))company is using Segregated Witness payments to multisignature scripts. To make it possible for any client to pay his company, regardless of whether their wallets are upgraded for segwit, Mohammed's wallet can embed the P2WSH witness program inside a P2SH script. First, Mohammed's wallet hashes the witness script with SHA256 (just once). Let's use +bx+ to do that on the command-line: .Mohammed's wallet creates a P2WSH witness program ---- echo \ 2 \ [04C16B8698A9ABF84250A7C3EA7EEDEF9897D1C8C6ADF47F06CF73370D74DCCA01CDCA79DCC5C395D7EEC6984D83F1F50C900A24DD47F569FD4193AF5DE762C587] \ [04A2192968D8655D6A935BEAF2CA23E3FB87A3495E7AF308EDF08DAC3C1FCBFC2C75B4B0F4D0B1B70CD2423657738C0C2B1D5CE65C97D78D0E34224858008E8B49] \ [047E63248B75DB7379BE9CDA8CE5751D16485F431E46117B9D0C1837C9D5737812F393DA7D4420D7E1A9162F0279CFC10F1E8E8F3020DECDBC3C0DD389D9977965] \ [0421D65CBD7149B255382ED7F78E946580657EE6FDA162A187543A9D85BAAA93A4AB3A8F044DADA618D087227440645ABE8A35DA8C5B73997AD343BE5C2AFD94A5] \ [043752580AFA1ECED3C68D446BCAB69AC0BA7DF50D56231BE0AABF1FDEEC78A6A45E394BA29A1EDF518C022DD618DA774D207D137AAB59E0B000EB7ED238F4D800] \ 5 CHECKMULTISIG \ | bx script-encode | bx sha256 9592d601848d04b172905e0ddb0adde59f1590f1e553ffc81ddc4b0ed927dd73 ---- Next, the hashed witness script is turned into a version-prefixed P2WSH witness program: ---- 0 9592d601848d04b172905e0ddb0adde59f1590f1e553ffc81ddc4b0ed927dd73 ---- Then, the witness program itself is hashed with SHA256 and RIPEMD160, producing a new 20-byte hash, as used in legacy P2SH. Let's use +bx+ on the command-line to do that: .The HASH160 of the P2WSH witness program ---- echo \ '0 [9592d601848d04b172905e0ddb0adde59f1590f1e553ffc81ddc4b0ed927dd73]'\ | bx script-encode | bx sha256 | bx ripemd160 86762607e8fe87c0c37740cddee880988b9455b2 ---- Next, the wallet constructs a P2SH Bitcoin address from this hash. Again, we use +bx+ to calculate on the command-line: .P2SH Bitcoin address ---- echo \ '86762607e8fe87c0c37740cddee880988b9455b2'\ | bx address-encode -v 5 3Dwz1MXhM6EfFoJChHCxh1jWHb8GQqRenG ---- Now, Mohammed's clients can make payments to this address even if they don't support segwit. To send a payment to Mohammed, a wallet would lock the output with the following P2SH script: .P2SH script used to lock payments to Mohammed's multisig ---- OP_HASH160 86762607e8fe87c0c37740cddee880988b9455b2 OP_EQUAL ---- Mohammed's company can then construct segwit transactions to spend these payments, taking advantage of segwit features including lower transaction fees. [[mast]] === Merklized Alternative Script Trees (MAST) Using +OP_IF+, you can authorize multiple different spending conditions, but this approach has several undesirable aspects: - _Weight (cost):_ every condition you add increases the size of the script, increasing the weight of the transaction and the amount of fee that will need to be paid in order to spend bitcoins protected by that script. - _Limited size:_ even if you're willing to pay for extra conditions, there's a limit to the maximum number you can put in a script. For example, legacy script is limited to 10,000 bytes, practically limiting you to a few hundred conditional branches at most. Even if you could create a script as large as an entire block, it could still only contain about 20,000 useful branches. That's a lot for simple payments but tiny compared to some imagined uses of Bitcoin. - _Lack of privacy:_ every condition you add to your script becomes public knowledge when you spend bitcoins protected by that script. For example, Mohammed's lawyer and business partners will be able to see the entire script in <> whenever anyone spends from it. That means their lawyer, even if he's not needed for signing, will be able to track all of their transactions. However, Bitcoin already uses a data structure known as a merkle tree that allows verifying an element is a member of a set without needing to identify every other member of the set. We'll learn more about merkle trees in <>, but the essential information is that members of the set of data we want (e.g. authorization conditions of any length) can be passed into a hash function to create a short commitment (called a _leaf_ of the merkle tree). Each of those leaves is then paired with another leaf and hashed again, creating a commitment to the leaves, called a _branch_ commitment. A commitment to a pair of branches can be created the same way. This step is repeated for the branches until only one identifier remains, called the _merkle root_. Using our example script from <>, we construct a merkle tree for each of the three authorization conditions in <>. [[diagram_mast1]] .A MAST with three sub-scripts image::../images/mast1.dot.png["A MAST with three sub-scripts"] We can now create a compact membership proof that proves a particular authorization condition is a member of the merkle tree without disclosing any details about the other members of the merkle tree. See <> and note that the nodes with diagonal corners can be computed from other data provided by the user, so they don't need to be specified at spend time. [[diagram_mast2]] .A MAST membership proof for one of the sub-scripts image::../images/mast2.dot.png["A MAST membership proof for one of the sub-scripts"] The hash digests used to create the commitments are each 32-bytes, so proving the above spend is authorized (using a merkle tree and the particular conditions) and authenticated (using signatures) uses 383 bytes. By comparison, the same spend without a merkle tree (i.e. providing all possible authorization conditions) uses 412 bytes. Saving 29 bytes (7%) in this example doesn't fully capture the potential savings. The binary-tree nature of a merkle tree means that you only need an additional 32-byte commitment every time you double the number of members in the set (in this case, authorization conditions). In this instance, with three conditions, we need to use three commitments (one of them being the merkle root, which will need to be included in the authorization data); we could also have four commitments for the same cost. An extra commitment would give us up to eight conditions. With just 16 commitments--512 bytes of commitments--we could have over 32,000 authorization conditions, far more than could be effectively used in an entire block of +OP_IF+ statements. With 128 commitments (4,096 bytes), the number of conditions we could create in theory far exceeds the number of conditions that all the computers in the world could create. It's commonly the case that not every authorization condition is equally as likely to be used. In the our example case, we expect Mohammed and his partners to spend their money frequently; the time delayed conditions only exist in case something goes wrong. We can re-structure our tree with this knowledge in <>. //FIXME: keep leaves in the same order, see Murch feedback chapter 7 [[diagram_mast3]] .A MAST with the most-expected script in the best position image::../images/mast3.dot.png["A MAST with the most-expected script in the best position"] Now we only need to provide two commitments for the common case (saving 32 bytes), although we still need three commitments for the less common cases. If you know (or can guess) the probabilities of using the different authorization conditions, you can use the Huffman algorithm to place them into a maximally-efficient tree; see BIP341 for details. Regardless of how the tree is constructed, we can see in the above examples that we're only revealing the actual authorization conditions that get used. The other conditions remain private. Also remaining private are the number of conditions: a tree could have a single condition or a trillion conditions--there's no way for someone looking only at the onchain data for a single transaction to tell. Except for increasing the complexity of Bitcoin slightly, there are no significant downsides of MAST for Bitcoin and there were two solid proposals for it, BIP114 and BIP116, before an improved approach was discovered, which we'll see in <>. [[pay_to_contract]] === Pay to Contract (P2C) As we saw in <>, the math of Elliptic Curve Cryptography (ECC) allows Alice to use a private key to derive a public key that she gives to Bob. He can add an arbitrary value to that public key to create a derived public key. If he gives that arbitrary value to Alice, she can add it to her private key to derive the private key for the derived public key. In short, Bob can create child public keys for which only Alice can create the corresponding private keys. This is useful for BIP32-style Hierarchical Deterministic (HD) wallet recovery, but it can also serve another use. Let's imagine Bob wants to buy something from Alice but he also wants to be able prove later what he paid for in case there's any dispute. Alice and Bob agree on the name of the item or service being sold, e.g. "Alice's podcast episode #123", and transform that description into a number by hashing it and interpreting the hash digest as a number. Bob adds that number to Alice's public key and pays it. The process is called _key tweaking_ and the number is known as a _tweak_. Alice can spend the funds by tweaking her private key using the same number (tweak). Later, Bob can prove to anyone what he paid Alice by revealing her underlying key and the description they used. Anyone can verify that the public key which was paid equals the underlying key plus the hash commitment to the description. If Alice admits that key is hers, then she received the payment. If Alice spent the funds, this further proves she knew the description at the time she signed the spending transaction, since she could only create a valid signature for the tweaked public key if she knew the tweak (the description). If neither Alice or Bob decided to publicly reveal the description they use, the payment between them looks like any other payment. There's no privacy loss. Because P2C is private by default, we can't know how often it is used for its original purpose--in theory every payment could be using it, although we consider that unlikely. However, P2C is widely used today in a slightly different form, which we'll see in <>. [[scriptless_multisignatures_and_threshold_signatures]] === Scriptless Multisignatures and Threshold Signatures In <>, we looked at scripts which require signatures from multiple keys. However, there's another way to require cooperation from multiple keys, which is also confusingly called _multisignature_. To distinguish between the two types in this section, we'll call the version involving `OP_CHECKSIG`-style opcodes _script multisignatures_ and the other version _scriptless multisignatures_. Scriptless multisignatures involves each participant creating their own secret the same way they create a private key. We'll call this secret a _partial private key_, although we should note that it's the same length as a regular full private key. From the partial private key, each participant derives a partial public key using the same algorithm used for regular public keys we described in <>. Each participant shares their partial public keys with all the other participants and then combines all of the keys together to create the scriptless multisignature public key. This combined public key looks the same as any other Bitcoin public key. A third party can't distinguish between a multi-party public key and an ordinary key generated by a single user. To spend bitcoins protected by the scriptless multisignature public key, each participant generates a partial signature. The partial signatures are then combined to create a regular full signature. There are many known methods for creating and combining the partial signatures; we'll look at this topic more in <>. Similar to the public keys for scriptless multisignatures, the signatures generated by this process look the same as any other Bitcoin signature. Third parties can't determine whether a signature was created by a single person or a million people cooperating with each other. Scriptless multisignatures are smaller and more private than scripted multisignatures. For scripted multisignatures, the number of bytes placed in a transaction increases for every key and signature involved. For scriptless multisignatures, the size is constant--a million participants each providing their own partial key and partial signature puts exactly the same amount of data in a transaction as an individual using a single key and signature. The story is the same for privacy: because each new key or signature adds data to a transaction, scripted multisignatures disclose data about how many keys and signatures are being used--which may make it easy to figure out which transactions were created by which group of participants. But, because every scriptless multisignatures looks like every other scriptless multisignature and every single-signature, no privacy-reducing data is leaked. There are two downsides of scriptless multisignatures. The first is that all known secure algorithms for creating them for Bitcoin require more rounds of interaction or more careful management of state (or both) than scripted multisignature. This can be challenging in cases where signatures are being generated by nearly stateless hardware signing devices and the keys are physically distributed. For example, if you keep a hardware signing device in a bank safe deposit box, you would need to visit that box once to create a scripted multisignature but possibly two or three times for a scriptless multisignature. The other downside is that threshold signing doesn't reveal who signed. In scripted threshold signing, Alice, Bob, and Carol agree (for example) that any two of them signing will be sufficient to spend the funds. If Alice and Bob sign, this requires putting signatures from each of them on chain, proving to anyone who knows their keys that they signed and Carol didn't. In scriptless threshold signing, a signature from Alice and Bob is indistinguishable from a signature between Alice and Carol or Bob and Carol. This is beneficial for privacy, but it means that, even if Carol claims she didn't sign, she can't prove that she didn't, which may be bad for accountability and auditability. For many users and use cases, the always reduced size and increased privacy of multisignatures outweighs its occasional challenges for creating and auditing signatures. [[taproot]] === Taproot One reason people choose to use Bitcoin is that it's possible to create contracts with highly predictable outcomes. Legal contracts enforced by a court of law depend in part on decisions by the judges and jurors involved in the case. By contrast, Bitcoin contracts often require actions by their participants but are otherwise enforced by thousands of full nodes all running functionally identical code. When given the same contract and the same input, every full node will always produce the same result. Any deviation would mean that Bitcoin was broken. Human judges and juries can be much more flexible than software, but when that flexibility isn't wanted or needed, the predictability of Bitcoin contracts is a major asset. If all of the participants in a contract recognize that its outcome has become completely predictable, there's not actually any need for them to continue using the contract. They could just do whatever the contract compels them to do and then terminate the contract. In society, this is how most contracts terminate: if the interested parties are satisfied, they never take the contract before a judge or jury. In Bitcoin, it means that any contract which will use a significant amount of block space to settle should also provide a clause that allows it to instead be settled by mutual satisfaction. In MAST and with scriptless multisignatures, a mutual satisfaction clause is easy to design. We simply make one of the top leaves of the script tree a scriptless multisignature between all interested parties. We already saw a complex contract between several parties with a simple mutual satisfaction clause in <>. We could make that more optimized by switching from scripted multisignature to scriptless multisignature. That's reasonably efficient and private. If the mutual satisfaction clause is used, we only need to provide a single merkle branch and all we reveal is that a signature was involved (it could be from one person or it could be from thousands of different participants). But developers in 2018 realized that we could do better if we also used pay-to-contract. In our previous description of pay-to-contract in <>, we tweaked a public key to commit to the text of an agreement between Alice and Bob. We can instead commit to the program code of a contract by committing to the root of a MAST. The public key we tweak is a regular Bitcoin public key, meaning it could require a signature from a single person or it could require a signature from multiple people (or it could be created in a special way to make it impossible to generate a signature for it). That means we can satisfy the contract either with a single signature from all interested parties or by revealing the MAST branch we want to use. That commitment tree involving both a public key and a MAST is shown in <>. [[diagram_taproot1]] .A taproot with the public key committing to a merkle root image::../images/taproot1.dot.png["A taproot with the public key committing to a merkle root"] This makes the mutual satisfaction clause using a multisignature extremely efficient and very private. It's even more private than it may appear because any transaction created by a single user who wants it to be satisfied by a single signature (or a multisignature generated by multiple different wallets they control) looks identical onchain to a mutual-satisfaction spend. There's no onchain difference in this case between a spend by million users involved in an extraordinarily complex contract or a single user just spending their saved bitcoins. When spending is possible using just the key, such for a single signature or scriptless multisignature, that is called _keypath spending_. When the tree of scripts is used, that is called _scriptpath spending_. For keypath spending, the data that gets put onchain is the public key (in a witness program) and the signature (on the witness stack). For scriptpath spending, the onchain data also includes the public key, which is placed in a witness program and called the _taproot output key_ in this context. The witness structure includes the following information: 1. A version number 2. The underlying key--the key which existed before being tweaked by the merkle root to produce the taproot output key. This underlying key is called the _taproot internal key_ 3. The leaf script to execute 4. One 32-byte hash for each junction in merkle tree along the path that connects the leaf to the merkle root 5. Any data necessary to satisfy the script (such as signatures or hash preimages) // Source for 33 bytes: https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2020-February/017622.html We're only aware of one significant described downside of taproot: contracts whose participants want to use MAST but who don't want a mutual satisfaction clause have to include a taproot internal key on the blockchain, adding about 33 bytes of overhead. Given that almost all contracts are expected to benefit from a mutual satisfaction clause, or other multisignature clause that uses the top-level public key, and all users benefit from the increased anonymity set of outputs looking similar to each other, that rare overhead was not considered important by most users who participated in taproot's activation. Support for taproot was added to Bitcoin in a soft fork which activated in November 2021. === Tapscript Taproot enables MAST but only with a slightly different version of the Bitcoin Script language than previously used, the new version being called _tapscript_. The major differences include: Scripted multisignature changes:: The old +OP_CHECKMULTSIG+ and +OP_CHECKMULTISIGVERIFY+ opcodes are removed. Those opcodes don't combine well with one of the other changes in the taproot soft fork, the ability to use schnorr signatures with batch validation, see <>. A new +OP_CHECKSIGADD+ opcode is provided instead. When it successfully verifies a signature, this new opcode increments a counter by one, making it possible to conveniently count how many signatures passed, which can be compared against the desired number of successful signatures to reimplement the same behavior as +OP_CHECKMULTISIG+. Changes to all signatures:: All signature operations in tapscript use the schnorr signature algorithm as defined in BIP340. We'll explore schnorr signatures more in <>. + Additionally, any signature-checking operation which is not expected to succeed must be fed the value +OP_FALSE+ (also called +OP_0+) instead of an actual signature. Providing anything else to a failed signature-checking operation will cause the entire script to fail. This also helps support batch validation of schnorr signatures. OP_SUCCESSx opcodes:: Opcodes in previous versions of script which were unusable are now redefined to cause an entire script to succeed if they are used. This allows future soft forks to redefine them as not succeeding, which is a restriction and so is possible to do in a soft fork. (The opposite, to define a not-succeeding operation as a success can only be done in a hard fork, which is a much more challenging upgrade path.) Although we've looked at authorization and authentication in depth in this chapter, we've skipped over one very important part of how Bitcoin authenticates spenders: its signatures. We'll look at that next in <>.