[[c_transactions]] == Transactions The way we typically transfer physical cash has little resemblance to the way we transfer bitcoins. Physical cash is a bearer token. Alice pays Bob by handing him some number of tokens, such as dollar bills. By comparison, bitcoins don't exist either physically or as digital data--Alice can't hand Bob some bitcoins or send them by email. Instead, consider how Alice might transfer control over a parcel of land to Bob. She can't physically pick up the land and hand it to Bob. Rather there exists some sort of record (usually maintained by a local government) which describes the land Alice owns. Alice transfers that land to Bob by convincing the government to update the record to say that Bob now owns the land. Bitcoin works in a similar way. There exists a database on every Bitcoin full node which says that Alice controls some number of bitcoins. Alice pays Bob by convincing full nodes to update their database to say that some of Alice's bitcoins are now controlled by Bob. The data that Alice uses to convince full nodes to update their databases is called a _transaction_. In this chapter we'll deconstruct a Bitcoin transaction and examine each of its parts to see how they facilitate the transfer of value in a way that's highly expressive and amazingly reliable. [[tx_structure]] === A Serialized Bitcoin Transaction In <>, we used Bitcoin Core with the txindex option enabled to retrieve a copy of Alice's payment to Bob. Let's retrieve the transaction containing that payment again. [[alice_tx_serialized_reprint]] .Alice's serialized transaction ---- $ bitcoin-cli getrawtransaction 466200308696215bbc949d5141a49a41\ 38ecdfdfaa2a8029c1f9bcecd1f96177 01000000000101eb3ae38f27191aa5f3850dc9cad00492b88b72404f9da13569 8679268041c54a0100000000ffffffff02204e0000000000002251203b41daba 4c9ace578369740f15e5ec880c28279ee7f51b07dca69c7061e07068f8240100 000000001600147752c165ea7be772b2c0acb7f4d6047ae6f4768e0141cf5efe 2d8ef13ed0af21d4f4cb82422d6252d70324f6f4576b727b7d918e521c00b51b e739df2f899c49dc267c0ad280aca6dab0d2fa2b42a45182fc83e81713010000 0000 ---- There's nothing special about Bitcoin Core's serialization format. Programs can use a different format as long as they transmit all of the same data. However, Bitcoin Core's format is reasonably compact for the data it transmits and simple to parse, so many other Bitcoin programs use this format. [TIP] ==== The only other widely-used transaction serialization format of which we're aware is the Partially Signed Bitcoin Transaction (PSBT) format documented in BIPs 174 and 370 (with extensions documented in other BIPs). PSBT allows an untrusted program to produce a transaction template which can be verified and updated by trusted programs (such as hardware signing devices) that posses the necessary private keys or other sensitive data to fill in the template. To accomplish this, PSBT allows storing a significant amount of metadata about a transaction, making it much less compact than the standard serialization format. This book does not go into detail about PSBT, but we strongly recommend it to developers of wallets that plan to support hardware signing devices or multiple-signer security. ==== The transaction displayed in hexadecimal in <> is replicated as a byte map in <>. Note that it takes 64 hexadecimal characters to display 32 bytes. This map shows only the top-level fields. We'll examine each of them in the order they appear in the transaction and describe any additional fields that they contain. [[alice_tx_byte_map]] .A byte map of Alice's transaction image::../images/tx-map-1.png["A byte map of Alice's transaction"] [[nVersion]] === Version The first four bytes of a serialized Bitcoin transaction are its version. The original version of Bitcoin transactions was version 1 (0x01000000). All transactions in Bitcoin must follow the rules of version 1 transactions, with many of those rules being described throughout this book. Version 2 Bitcoin transactions were introduced in the BIP68 soft fork change to Bitcoin's consensus rules. BIP68 places additional constraints on the nSequence field, but those constraints only apply to transactions with version 2 or higher. Version 1 transactions are unaffected. BIP112, which was part of the same soft fork as BIP68, upgraded an opcode (OP_CHECKSEQUENCEVERIFY) which will now fail if it is evaluated as part of a transaction with a version less than 2. Beyond those two changes, version 2 transactions are identical to version 1 transactions. .Protecting Pre-Signed Transactions **** The last step before broadcasting a transaction to the network for inclusion in the blockchain is to sign it. However, it's possible to sign a transaction without broadcasting it immediately. You can save that pre-signed transaction for months or years in the belief that it can be added to the blockchain later when you do broadcast it. In the interim, you may even lose access to the private key (or keys) necessary to sign an alternative transaction spending the funds. This isn't hypothetical: several protocols built on Bitcoin, including Lightning Network, depend on pre-signed transactions. This creates a challenge for protocol developers when they assist users in upgrading the Bitcoin consensus protocol. Adding new constraints--such as BIP68 did to the nSequence field--may invalidate some pre-signed transactions. If there's no way to create a new signature for an equivalent transaction, then the money being spent in the pre-signed transaction is permanently lost. This problem is solved by reserving some transaction features for upgrades, such as version numbers. Anyone creating pre-signed transactions prior to BIP68 should have been using version 1 transactions, so only applying BIP68's additional constraints on nSequence to transactions v2 or higher should not invalidate any pre-signed transactions. If you implement a protocol that uses pre-signed transactions, ensure that it doesn't use any features that are reserved for future upgrades. Bitcoin Core's default transaction relay policy does not allow the use of reserved features. You can test whether a transaction complies with that policy by using the Bitcoin Core RPC +testmempoolaccept+ on Bitcoin mainnet. **** As of this writing, a proposal to begin using version 3 transactions is being widely considered. That proposal does not seek to change the consensus rules but only the policy that Bitcoin full nodes use to relay transactions. Under the proposal, version 3 transactions would be subject to additional constraints in order to prevent certain Denial of Service (DoS) attacks that we'll discuss further in <> === Extended Marker and Flag The next two fields of the example serialized transaction were added as part of the Segregated Witness (segwit) soft fork change to Bitcoin's consensus rules. The rules were changed according to BIPs 141 and 143, but the _extended serialization format_ is defined in BIP144. If the transaction includes a witness field (which we'll describe in <>), the marker must be zero (0x00) and the flag must be non-zero. In the current P2P protocol, the flag should always be one (0x01); alternative flags are reserved for later protocol upgrades. If the transaction doesn't need a witness, the marker and flag must not be present. This is compatible with the original version of Bitcoin's transaction serialization format, now called _legacy serialization_. For details, see <>. In legacy serialization, the marker byte would have been interpreted as the number of inputs (zero). A transaction can't have zero inputs, so the marker signals to modern programs that extended serialization is being used. The flag field provides a similar signal and also simplifies the process of updating the serialization format in the future. [[inputs]] === Inputs The inputs field contains several other fields, so let's start by showing a map of those bytes in <>. [[alice_tx_input_map]] .Map of bytes in the input field of Alice's transaction image::../images/input-byte-map.png["map of bytes in the input field of Alice's transaction"] ==== Inputs Count The input field starts with an integer indicating the number of inputs in the transaction. The minimum value is one. There's no explicit maximum value, but restrictions on the maximum size of a transaction effectively limit transactions to a few thousand inputs. The number is encoded as a compactSize unsigned integer. .CompactSize Unsigned Integers **** Unsigned integers in Bitcoin that often have low values, but which may sometimes have high values, are usually encoded using the compactSize data type. CompactSize is a version of a variable-length integer, so it's sometimes called var_int or varint (see, for example, documentation for BIPs 37 and 144). [WARNING] ==== There are several different varieties of variable length integers used in different programs, including in different Bitcoin programs. For example, Bitcoin Core serializes its UTXO database using a data type it calls +VarInts+ which is different from compactSize. Additionally, the nBits field in a Bitcoin block header is encoded using a custom data type known as +Compact+, which is unrelated to compactSize. When talking about the variable length integers used in Bitcoin transaction serialization and other parts of the Bitcoin P2P protocol, we will always use the full name compactSize. ==== For numbers from 0 to 252, compactSize unsigned integers are identical to the C-language data type +uint8_t+, which is probably the native encoding familiar to any programmer. For other numbers up to 0xffffffffffffffff, a byte is prefixed to the number to indicate its length—but otherwise the numbers look like regular unsigned integers. [cols="1,1,1"] |=== | Value | Bytes Used | Format | >= 0 && \<= 252 (0xfc) | 1 | uint8_t | >= 253 && \<= 0xffff | 3 | 0xfd followed by the number as uint16_t | >= 0x10000 && \<= 0xffffffff | 5 | 0xfe followed by the number as uint32_t | >= 0x100000000 && \<= 0xffffffffffffffff | 9 | 0xff followed by the number as uint64_t |=== **** Each input in a transaction must contain three fields: - An _outpoint_ field - A length-prefixed _scriptSig_ field - An _nSequence_ We'll look at each of those fields in the following sections. Some inputs also include a witness, but this is serialized at the end of a transaction and so we'll examine it later. [[outpoints]] ==== Outpoint A Bitcoin transaction is a request for full nodes to update their database of coin ownership information. For Alice to transfer control of some of her bitcoins to Bob, she first needs to tell full nodes how to find the previous transfer where she received those bitcoins. Since control over bitcoins is assigned in transaction outputs, Alice _points_ to the previous _output_ using an _outpoint_ field. Each input must contain a single outpoint. The outpoint contains a 32-byte transaction identifier (_txid_) for the transaction where Alice received the bitcoins she now wants to spend. This txid is in Bitcoin's internal byte order for hashes, see <>. Because transactions may contain multiple outputs, Alice also needs to identify which particular output from that transaction to use, called its output vector (_vout_). Output vectors are four-byte unsigned integers indexed from zero. When a full node encounters an outpoint, it uses that information to try to find the referenced output. Full nodes only look at earlier transactions in the blockchain. For example, Alice's transaction is included in block 774,958. A full node verifying her transaction will only look for the previous output referenced by her outpoint in that block and previous blocks, not any later blocks. Within block 774,958, they will only look at transactions placed in the block prior to Alice's transaction, as determined by the order of leaves in the block's merkle tree (see <>). Upon finding the previous output, the full node obtains several critical pieces of information from it: - The value of bitcoins assigned to that previous output. All of those bitcoins will be transferred in this transaction. In the example transaction, the value of the previous output was 100,000 satoshis. - The authorization conditions for that previous output. These are the conditions that must be fulfilled in order to spend the bitcoins assigned to that previous output. - For confirmed transactions, the height of the block which confirmed it and the Median Time Past (MTP) for that block. This is required for relative timelocks (described in <>) and outputs of coinbase transactions (described in <>). - Proof that the previous output exists in the blockchain (or as a known unconfirmed transaction) and that no other transaction has spent it. One of Bitcoin's consensus rules forbids any output from being spent more than once within a valid blockchain. This is the rule against _double spending_--Alice can't use the same previous output to pay both Bob and Carol. Two transactions which each try to spend the same previous output are called _conflicting transactions_ because only one of them can be included in a valid blockchain. Different approaches to tracking previous outputs have been tried by different full node implementations at various times. Bitcoin Core currently uses the solution believed to be most effective at retaining all necessary information while minimizing disk space: it keeps a database that stores every Unspent Transaction Output (UTXO) and essential metadata about it (like its confirmation block height). Each time a new block of transactions arrives, all of the outputs they spend are removed from the UTXO database and all of the outputs they create are added to the database. [[internal_and_display_order]] .Internal and Display Byte Orders **** Bitcoin uses the output of hash functions, called _digests_, in various ways. Digests provide unique identifiers for blocks and transactions; they're used in commitments for addresses, blocks, transactions, signatures, and more; and digests are iterated upon in Bitcoin's proof-of-work function. In some cases, hash digests are displayed to users in one byte order but are used internally in a different byte order, creating confusion. For example, consider the previous output txid from the outpoint in our example transaction: ---- eb3ae38f27191aa5f3850dc9cad00492b88b72404f9da135698679268041c54a ---- If we try using that that txid to retrieve that transaction using Bitcoin Core, we get an error and must reverse its byte order: ---- $ bitcoin-cli getrawtransaction \ eb3ae38f27191aa5f3850dc9cad00492b88b72404f9da135698679268041c54a error code: -5 error message: No such mempool or blockchain transaction. Use gettransaction for wallet transactions. $ echo eb3ae38f27191aa5f3850dc9cad00492b88b72404f9da135698679268041c54a \ | fold -w2 | tac | tr -d "\n" 4ac541802679866935a19d4f40728bb89204d0cac90d85f3a51a19278fe33aeb $ bitcoin-cli getrawtransaction \ 4ac541802679866935a19d4f40728bb89204d0cac90d85f3a51a19278fe33aeb 02000000000101c25ae90c9f3d40cc1fc509ecfd54b06e35450702... ---- This odd behavior is probably an unintentional consequence of a https://bitcoin.stackexchange.com/questions/116730/why-does-bitcoin-core-print-sha256-hashes-uint256-bytes-in-reverse-order[design decision in early Bitcoin software]. As a practical matter, it means developers of Bitcoin software need to remember to reverse the order of bytes in transaction and block identifiers that they show to users. In this book, we use the term _internal byte order_ for the data that appears within transactions and blocks. We use _display byte order_ for the form displayed to users. Another set of common terms is _little-endian byte order_ for the internal version and _big-endian byte order_ for the display version. **** ==== ScriptSig The scriptSig field is a remnant of the legacy transaction format. Our example transaction input spends a native segwit output which doesn't require any data in the scriptSig, so the length prefix for the scriptSig is set to zero (0x00). For an example of a length-prefixed scriptSig that spends a legacy output, we use one from an arbitrary transaction in the most recent block as of this writing: ---- 6b483045022100a6cc4e8cd0847951a71fad3bc9b14f24d44ba59d19094e0a8c fa2580bb664b020220366060ea8203d766722ed0a02d1599b99d3c95b97dab8e 41d3e4d3fe33a5706201210369e03e2c91f0badec46c9c903d9e9edae67c167b 9ef9b550356ee791c9a40896 ---- The length prefix is a compactSize unsigned integer indicating the length of the serialized scriptSig field. In this case, it's a single byte (0x6b) indicating the scriptSig is 107 bytes. We'll cover parsing and using scripts in detail in the next chapter, <>. ==== nSequence The final four bytes of an input are its sequence number, called _nSequence_. The use and meaning of this field has changed over time. [[original_tx_replacement]] ===== Original nSequence-based Transaction Replacement The +nSequence+ field was originally intended to allow creation of multiple versions of the same transaction, with later versions replacing earlier versions as candidates for confirmation. The nSequence number tracked the version of the transaction. For example, imagine Alice and Bob want to bet on a game of cards. They start by each signing a transaction that deposits some money into an output with a script which requires signatures from both of them to spend, a _multi-signature_ script (_multisig_ for short). This is called the _setup transaction_. They then create a transaction which spends that output: - The first version of the transaction, with nSequenece 0 (0x00000000) pays Alice and Bob back the money they initially deposited. This is called a _refund transaction_. Neither of them broadcasts the refund the transaction at this time. They only need it if there's a problem. - Alice wins the first round of the card game, so the second version of the transaction, with nSequence 1, increases the amount of money paid to Alice and decreases Bob's share. They both sign the updated transaction. Again, they don't need to broadcast this version of the transaction unless there's a problem. - Bob wins the second round, so the nSequence is incremented to 2, Alice's share is decreased, and Bob's share is increased. They again sign but don't broadcast. - After many more rounds where the nSequence is incremented, the funds redistributed, and the resulting transaction is signed but not broadcast, they decide to finalize the transaction. Creating a transaction with the final balance of funds, they set nSequence to its maximum value (0xffffffff), finalizing the transaction. They broadcast this version of the transaction, it's relayed across the network, and eventually confirmed by miners. We can see the replacement rules for nSequence at work if we consider alternative scenarios: - Imagine that Alice broadcasts the final transaction, with an nSequence of 0xffffffff, and then Bob broadcasts one of the earlier transactions where his balance was higher. Because Bob's version of the transaction has a lower sequence number, full nodes using the original Bitcoin code won't relay it to miners, and miners who also used the original code won't mine it. - In another scenario, imagine that Bob broadcasts an earlier version of the transaction a few seconds before Alice broadcasts the final version. Nodes will relay Bob's version and miners will attempt to mine it, but when Alice's version with its higher nSequence number arrives, nodes will also relay it and miners using the original Bitcoin code will try to mine it instead of Bob's version. Unless Bob got lucky and a block was discovered before Alice's version arrived, it's Alice's version of the transaction that will get confirmed. This type of protocol is what we now call a _payment channel_. Bitcoin's creator, in an email attributed to him, described these as high-frequency transactions and described a number of features added to the protocol to support them. We'll learn about several of those other features later and also discover how modern versions of payment channels are increasingly being used in Bitcoin today. There were a few problems with purely nSequence-based payment channels. The first was that the rules for replacing a lower-sequence transaction with a higher-sequence transaction were only a matter of software policy. There was no direct incentive for miners to prefer one version of the transaction over any other. The second problem was that the first person to send their transaction might get lucky and have it confirmed even if it wasn't the highest-sequence transaction. A security protocol that fails a few percent of the time due to bad luck isn't a very effective protocol. The third problem was that it was possible to replace one version of a transaction with a different version an unlimited number of times. Each replacement would consume the bandwidth of all the relaying full nodes on the network. For example, as of this writing there are about 50,000 relaying full nodes; an attacker creating 1,000 replacement transactions per minute at 200 bytes each would use about 20 kilobytes of their personal bandwidth but about 10 gigabytes of full node network bandwidth every minute. Except for the cost of their 20 KB/minute bandwidth and the occasional fee when a transaction got confirmed, the attacker wouldn't need to pay any costs for the enormous burden they placed on full node operators. To eliminate the risk of this attack, the original type of nSequence-based transaction replacement was disabled in an early version of the Bitcoin software. For several years, Bitcoin full nodes would not allow an unconfirmed transaction containing a particular input (as indicated by its outpoint) to be replaced by a different transaction containing the same input. However, that situation didn't last forever. [[nsequence-bip125]] ===== Opt-in Transaction Replacement Signaling After the original nSequence-based transaction replacement was disabled due to the potential for abuse, a solution was proposed: programming Bitcoin Core and other relaying full node software to allow a transaction that paid a higher transaction fee rate to replace a conflicting transaction that paid a lower fee rate. This is called _Replace-By-Fee_, or _RBF_ for short. Some users and businesses objected to adding support for transaction replacement back into Bitcoin Core, so a compromise was reached that once again used the nSequence field in support of replacement. As documented in BIP125, an unconfirmed transaction with any input that has an nSequence set to a value below 0xfffffffe (i.e., at least 2 below the maximum value) signals to the network that its signer wants it to be replaceable by a conflicting transaction paying a higher fee rate. Bitcoin Core allowed those unconfirmed transactions to be replaced and continued to disallow other transactions from being replaced. This allowed users and businesses that objected to replacement to simply ignore unconfirmed transactions containing the BIP125 signal until they became confirmed. There's more to modern transaction replacement policies than fee rates and nSequence signals, which we'll see in <>. [[relative_timelocks]] ===== nSequence as a consensus-enforced relative timelock In the <> section, we learned that the BIP68 soft fork added a new constraint to transactions with version numbers 2 or higher. That constraint applies to the nSequence field. Transaction inputs with +nSequence+ values less than 2^31^ are interpreted as having a relative timelock. Such a transaction may only be included in the blockchain once the previous output (referenced by the outpoint) has aged by the relative timelock amount. For example, a transaction with one input with a relative timelock of 30 blocks can only be confirmed after least 30 blocks have elapsed from the time the previous output was confirmed in a block on the current blockchain. Since +nSequence+ is a per-input field, a transaction may contain any number of timelocked inputs, all of which must have sufficiently aged for the transaction to be valid. A transaction can include both timelocked inputs (+nSequence+ < 2^31^) and inputs without a relative timelock (+nSequence+ >= 2^31^). The +nSequence+ value is specified in either blocks or seconds. A type-flag is used to differentiate between values counting blocks and values counting time in seconds. The type-flag is set in the 23rd least-significant bit (i.e., value 1<<22). If the type-flag is set, then the +nSequence+ value is interpreted as a multiple of 512 seconds. If the type-flag is not set, the +nSequence+ value is interpreted as a number of blocks. When interpreting +nSequence+ as a relative timelock, only the 16 least significant bits are considered. Once the flags (bits 32 and 23) are evaluated, the +nSequence+ value is usually "masked" with a 16-bit mask (e.g., +nSequence+ & 0x0000FFFF). The multiple of 512 seconds is roughly equal to the average amount of time between blocks, so the maximum relative timelock in both blocks and seconds from 16 bits (2^16^) is about one year. <> shows the binary layout of the +nSequence+ value, as defined by BIP68. [[bip_68_def_of_nseq]] .BIP68 definition of nSequence encoding (Source: BIP68) image::../images/mbc2_0701.png["BIP68 definition of nSequence encoding"] Note that any transaction which sets a relative timelock using nSequence also sends the signal for opt-in replace-by-fee as described in <>. === Outputs The outputs field of a transaction contains several fields related to specific outputs. Just as we did with the inputs field, we'll start by looking at the specific bytes of the output field from the example transaction where Alice pays Bob, displayed as a map of those bytes in <>. [[output-byte-map]] .A byte map of the outputs field from Alice's transaction image::../images/output-byte-map.png["A byte map of the outputs field from Alice's transaction"] ==== Outputs Count Identical to the start of the input section of a transaction, the output field begins with a count indicating the number of outputs in this transaction. It's a compactSize integer and must be greater than zero. The example transaction has two outputs. ==== nValue The first field of a specific output is its value, also called _nValue_ in Bitcoin Core. This is an eight-byte signed integer indicating the number of _satoshis_ to transfer. A satoshi is the smallest unit of bitcoin that can be represented in an onchain Bitcoin transaction. There are 100 million satoshis in a bitcoin. Bitcoin's consensus rules allow an output to have a value as small as zero and as large as 21 million bitcoins (2.1 quadrillion satoshis). //TODO:describe early integer overflow problem [[uneconomical_outputs]] ===== Uneconomical Outputs and Disallowed Dust Despite not having any value, a zero-value output can be spent under the same rules as any other output. However, spending an output (using it as the input in a transaction) increases the size of a transaction, which increases the amount of fee that needs to be paid. If the value of the output is less than the cost of the additional fee, then it doesn't make economic sense to spend the output. Such outputs are known as _uneconomical outputs_. A zero-value output is always an uneconomical output; it wouldn't contribute any value to a transaction spending it even if the transaction's fee rate was zero. However, many other outputs with low values can be uneconomical as well, even unintentionally. For example, at a typical fee rate on the network today, an output might add more value to a transaction than it costs to spend--but, tomorrow, fee rates might rise and make the output uneconomical. The need for full nodes to keep track of all unspent transaction outputs (UTXOs), as described in <>, means that every UTXO makes it slightly harder to run a full node. For UTXOs containing significant value, there's an incentive to eventually spend them, so they aren't a problem. But there's no incentive for the person controlling an uneconomical UTXO to ever spend it, potentially making it a perpetual burden on operators of full nodes. Because Bitcoin's decentralization depends on many people being willing to run full nodes, several full node implementations such as Bitcoin Core discourage the creation of uneconomical outputs using policies for the relay and mining of unconfirmed transactions. The policies against relaying or mining transactions creating new uneconomical outputs are called _dust_ policies, based on a metaphorical comparison between outputs with very small values and particles with very small size. Bitcoin Core's dust policy is complicated and contains several arbitrary numbers, so many programs we're aware of simply assume outputs with less than 546 satoshis are dust and will not be relayed or mined by default. There are occasionally proposals to lower dust limits, and counterproposals to raise them, so we encourage developers using presigned transactions or multi-party protocols to check whether the policy has changed since publication of this book. [TIP] ==== Since Bitcoin's inception, every full node has needed to keep a copy of every unspent transaction output (UTXO), but that might not always be the case. Several developers have been working on Utreexo, a project that allows full nodes to store a commitment to the set of UTXOs rather than the data itself. A minimal commitment might be only a kilobyte or two in size--compare that to the over five gigabytes Bitcoin Core stores as of this writing. However, Utreexo will still require some nodes to store all UTXO data, especially nodes serving miners and other operations that need to quickly validate new blocks. That means uneconomical outputs can still be a problem for full nodes even in a possible future where most nodes use Utreexo. ==== Bitcoin Core's policy rules about dust do have one exception: output scriptPubKeys starting with +OP_RETURN+, called _data carrier outputs_, can have a value of zero. The OP_RETURN opcode causes the script to immediately fail no matter what comes after it, so these outputs can never be spent. That means full nodes don't need to keep track of them, a feature Bitcoin Core takes advantage of to allow users to store small amounts of arbitrary data in the blockchain without increasing the size of its UTXO database. Since the outputs are unspendable, they aren't uneconomical--any satoshis in nValue assigned to them becomes permanently unspendable--so allowing the nValue to be zero ensures satoshis aren't being destroyed. ==== ScriptPubKey The output amount is followed by a compactSize integer indicating the length of the output's _scriptPubKey_, the script that contains the conditions which will need to be fulfilled in order to spend the bitcoins, the _spending authorization_. According to Bitcoin's consensus rules, the minimum size of a scriptPubKey is zero. The consensus maximum allowed size of a scriptPubKey varies depending on when it's being checked. There's no explicit limit on the size of a scriptPubKey in the output of a transaction, but a later transaction can only spend a previous output with a scriptPubKey of 10,000 bytes or smaller. Implicitly, a scriptPubKey can be almost as large as the transaction containing it, and a transaction can be almost as large as the block containing it. [[anyone-can-spend]] [TIP] ==== A scriptPubKey with zero length can be spent by a scriptSig containing OP_TRUE. Anyone can create that scriptSig, which means anyone can spend an empty scriptPubKey. There are an essentially unlimited number of scripts which anyone can spend and they are known to Bitcoin protocol developers as _anyone can spends_. Upgrades to Bitcoin's script language often take an existing anyone-can-spend script and add new constraints to it, making it only spendable under the new conditions. Application developers should never need to use an anyone-can-spend script, but if you do, we highly recommend that you loudly announce your plans to Bitcoin users and developers so that future upgrades don't accidentally interfere with your system. ==== Bitcoin Core's policy for relaying and mining transactions effectively limits scriptPubKeys to just a few templates, called _standard transaction outputs_. This was originally implemented after the discovery of several early bugs in Bitcoin related to the Script language and is retained in modern Bitcoin Core to support anyone-can-spend upgrades and to encourage the best practice of placing script conditions in P2SH redeemScripts, segwit v1 witness scripts, and segwit v2 (taproot) tapscripts. We'll look at each of the current standard transaction templates and learn how to parse scripts in <>. [[witnesses]] === Witnesses In court, a witness is someone who testifies that they saw something important happen. Human witnesses aren't always reliable, so courts have various processes for interrogating witnesses to (ideally) only accept evidence from those who are reliable. Imagine what a witness would look like for a math problem. For example, if the important problem was _x + 2 = 4_ and someone claimed they witnessed the solution, what would we ask them? We'd want a mathematical proof that showed a value which could be summed with two to equal four. We could even omit the need for a person and just use the proposed value for _x_ as our witness. If we were told that the witness was _two_, then we could fill in the equation, check that it was correct, and decide that the important problem had been solved. When spending bitcoins, the important problem we want to solve is determining whether the spend was authorized by the person or people who control those bitcoins. The thousands of full nodes which enforce Bitcoin's consensus rules can't interrogate human witnesses, but they can accept _witnesses_ that consist entirely of data for solving math problems. For example, a witness of _2_ will allow spending bitcoins protected by the following script: ---- 2 OP_ADD 4 OP_EQUAL ---- Obviously, allowing your bitcoins to be spent by anyone who can solve a simple equation wouldn't be secure. As we'll see in <>, an unforgeable digital signature scheme uses an equation that can only be solved by someone in possession of certain data which they're able to keep secret. They're able to reference that secret data using a public identifier. That public identifier is called a _public key_ and a solution to the equation is called a _signature_. The following script contains a public key and an opcode which requires a corresponding signature commit to the data in spending transaction. Like the number _2_ in our simple example, the signature is our witness. ---- OP_CHECKSIG ---- Witnesses, the values used to solve the math problems that protect bitcoins, need to be included in the transactions where they're used in order for full nodes to verify them. In the legacy transaction format used for all early Bitcoin transactions, signatures and other data are placed in the scriptSig field. However, when developers started to implement contract protocols on Bitcoin, such as we saw in <>, they discovered several significant problems with placing witnesses in the scriptSig field. ==== Circular Dependencies Many contract protocols for Bitcoin involve a series of transactions which are signed out of order. For example, Alice and Bob want to deposit funds into a script that can only be spent with signatures from both of them, but they each also want to get their money back if the other person becomes unresponsive. A simple solution is to sign transactions out of order. - Tx~0~ pays money from Alice and money from Bob into an output with a scriptPubKey that requries signatures from both Alice and Bob to spend - Tx~1~ spends the previous output to two outputs, one refunding Alice her money and one refunding Bob his money (minus a small amount for transaction fees) - If Alice and Bob sign Tx~1~ before they sign Tx~0~, then they're both guaranteed to be able to get a refund at any time. The protocol doesn't require either of them trust the other, making it a _trustless protocol_. A problem with this construction in the legacy transaction format is that every field, including the scriptSig field which contains signatures, is used to build a transaction's identifier (txid). The txid for Tx~0~ is part of the input's outpoint in Tx~1~. That means there's no way for Alice and Bob to construct Tx~1~ until both signatures for Tx~0~ are known--but if they know the signatures for Tx~0~, one of them can broadcast that transaction before signing the refund transaction, eliminating the guarantee of a refund. This is a _circular dependency_. ==== Third-Party Transaction Malleability A more complex series of transactions can sometimes eliminate a circular dependency, but many protocols will then encounter a new concern: it's often possible to solve the same script in different ways. For example, consider our simple script from <>: ---- 2 OP_ADD 4 OP_EQUAL ---- We can make this script pass by providing the value _2_ in a scriptSig, but there are several ways to put that value on the stack in Bitcoin. Here are just a few: ---- OP_2 OP_PUSH1 0x02 OP_PUSH2 0x0002 OP_PUSH3 0x000002 ... OP_PUSHDATA1 0x0102 OP_PUSHDATA1 0x020002 ... OP_PUSHDATA2 0x000102 OP_PUSHDATA2 0x00020002 ... OP_PUSHDATA4 0x0000000102 OP_PUSHDATA4 0x000000020002 ... ---- Each alternative encoding of the number _2_ in a scriptSig will produce a slightly different transaction with a completely different txid. Each different version of the transaction spends the same inputs (outpoints) as every other version of the transaction, making them all _conflict_ with each other. Only one version of a set of conflicting transactions can be contained within a valid blockchain. Imagine Alice creates one version of the transaction with +OP_2+ in the scriptSig and an output that pays Bob. Bob then immediately spends that output to Carol. Anyone on the network can replace +OP_2+ with +OP_PUSH1 0x02+, creating a conflict with Alice's original version. If that conflicting transaction is confirmed, then there's no way to include Alice's original version in the same blockchain, which means there's no way for Bob's transaction to spend its output. Bob's payment to Carol has been made invalid even though neither Alice, Bob, nor Carol did anything wrong. Someone not involved in the transaction (a third-party) was able to change (mutate) Alice's transaction, a problem called _unwanted third-party transaction malleability_. [TIP] ==== There are cases when people want their transactions to be malleable and Bitcoin provides several features to support that, most notably the signature hashes (sighash) we'll learn about in <>. For example, Alice can use a sighash to allow Bob to help her pay some transaction fees. This mutates Alice's transaction but only in a way that Alice wants. For that reason, we will occasionally prefix the word _unwanted_ to the term _transaction malleability_. Even when we and other Bitcoin technical writers use the base term, we're almost certainly talking about the unwanted variant of malleability. ==== ==== Second-Party Transaction Malleability When the legacy transaction format was the only transaction format, developers worked on proposals to minimize third-party malleability, such as BIP62. However, even if they were able to entirely eliminate third-party malleability, users of contract protocols faced another problem: if they required a signature from someone else involved in the protocol, that person could generate alternative signatures and so change the txid. For example, Alice and Bob have deposited their money into a script requiring a signature from both of them to spend. They've also created a refund transaction that allows each of the to get their money back at any time. Alice decides she wants to spend just some of the money, so she cooperates with Bob to create a chain of transactions. - Tx~0~ includes signatures from both Alice and Bob, spending its bitcoins to two outputs. The first output spends some of Alice's money; the second output returns the remainder of the bitcoins back to the script requiring Alice and Bob's signatures. Before signing this transaction, they create a new refund transaction, Tx~1~. - Tx~1~ spends the second output of Tx~0~ to two new outputs, one to Alice for her share of the joint funds, and one to Bob for his share. Alice and Bob both sign this transaction before they sign Tx~0~. There's no circular dependency here and, if we ignore third-party transaction malleability, this looks like it should provide us with a trustless protocol. However, it's a property of Bitcoin signatures that the signer has to choose a large random number when creating their signature. Choosing a different random number will produce a different signature even if everything being signed stays the same. It's sort of like how, if you provide a handwritten signature for two copies of the same contract, each of those physical signatures will look slightly different. This mutability of signatures means that, if Alice tries to broadcast Tx~0~ (which contains Bob's signature), Bob can generate an alternative signature to create a conflicting transaction with a different txid. If Bob's alternative version of Tx~0~ gets confirmed, then Alice can't use the presigned version of Tx~1~ to claim her refund. This type of mutation is called _unwanted second-party transaction malleability_. [[segwit]] ==== Segregated Witness As early as https://bitcointalk.org/index.php?topic=40627.msg494697[2011], protocol developers knew how to solve the problems of circular dependence, third-party malleability, and second-party malleability. The idea was to avoid including the scriptSig in the calculation that produces a transaction's txid. Recall that an abstract name for the data held by a scriptSig is a _witness_. The idea of separating the rest of the data in a transaction from its witness for the purpose of generating a txid is called _segregated witness_ (segwit). The obvious method for implementing segwit requires a backwards-incompatible change to Bitcoin's consensus rules, also called a _hard fork_. Hard forks come with a lot of challenges, as we'll discuss further in <>. An alternative approach to segwit was described in late 2015. This would use a backwards-compatible change to the consensus rules, called a _soft fork_. Backwards compatible means that full nodes implementing the change must not accept any blocks that full nodes without the change would consider invalid. As long as they obey that rule, newer full nodes can reject blocks that older full nodes would accept, giving them the ability to enforce new consensus rules (but only if the newer full nodes represent the economic consensus among Bitcoin users--we'll explore the details of upgrading Bitcoin's consensus rules in <>). The soft fork segwit approach is based on anyone-can-spend scriptPubKeys. A script which starts with any of the numbers 0 to 16 and followed by 2 to 40 bytes of data is defined as a segwit scriptPubKey template. The number indicates its version (e.g. 0 is segwit version 0, or _segwit v0_). The data is called a _native witness program_. It's also possible to wrap the segwit template in a P2SH commitment, called a _P2SH witness program_, but we won't deal with that here. From the perspective of old nodes, these scriptPubKey templates can be spent with an empty scriptSig. From the perspective of a new node which is aware of the new segwit rules, any payment to a segwit scriptPubKey template must only be spent with an empty scriptSig. Notice the difference here: old nodes _allow_ an empty scriptSig; new nodes _require_ an empty scriptSig. An empty scriptSig keeps witnesses from affecting the txid, eliminating circular dependencies, third-party transaction malleability, and second-party transaction malleability. But, with no ability to put data in a scriptSig, users of segwit scriptPubKey templates need a new field. That field is called the _witness_. The introduction of witnesses and witness programs complicates Bitcoin, but it follows an existing trend of increasing abstraction. Recall from <> that the original Bitcoin whitepaper describes a system where bitcoins were received to public keys (pubkeys) and spent with signatures (sigs). The public key defined who was _authorized_ to spend the bitcoins (whoever controlled the corresponding private key) and the signature provided _authentication_ that the spending transaction came from someone who controlled the private key. To make that system more flexible, the initial release of Bitcoin introduced scripts that allow bitcoins to be received to scriptPubKeys and spent with scriptSigs. Later experience with contract protocols inspired allowing bitcoins to be received to witness programs and spent with witnesses. .Terms used for authorization and authentication data in different parts of Bitcoin [cols="1,1,1"] |=== | | **Authorization** | **Authentication** | **Whitepaper** | Public key | Signature | **Original (Legacy)** | scriptPubKey | scriptSig | **Segwit** | Witness program | Witness |=== ==== Witness Serialization Similar to the inputs and outputs fields, the witness field contains several other fields, so we'll start with a map of those bytes from Alice's transaction in <>: [[alice_tx_witness_map]] .A byte map of the witness from Alice's transaction image::../images/witness-byte-map.png["A byte map of the witness from Alice's transaction"] Unlike the inputs and outputs fields, the overall witness field doesn't start with any indication of the total number of elements it contains. Instead, this is implied by the inputs field--there's one witness element for every input in a transaction. The witness field for a particular input does start with a count of the number of elements they contain. Those elements are called _stack items_. We'll explore them in detail in <>, but for now we need to know that each stack item is prefixed by a compactSize integer indicating its size. Legacy inputs don't contain any witness stack items so their witness consists entirely of a count of zero (0x00). Alice's transaction contains one input and one stack item. [[nlocktime]] === nLockTime The final field in a serialized transaction is its _nLockTime_. This field was part of Bitcoin's original serialization format but it was only initially enforced by Bitcoin's policy for choosing which transactions to mine. Bitcoin's earliest known soft fork added a rule that, starting at block height 31,000, forbid the inclusion of a transaction in a block unless it satisfies one of the following rules: - The transaction indicates that it should be eligible for inclusion in any block by setting its nLockTime to 0. - The transaction indicates that it wants to restrict which blocks it can be included in by setting its nLockTime to a value less than 500,000,000. In this case, the transaction can only be included in a block that has a height equal to the nLockTime or higher. For example, a transaction with an nLockTime of 123,456 can be included in block 123,456 or any later block. - The transaction indicates that it wants to restrict when it can be included in the blockchain by setting its nLockTime to a value of 500,000,000 or greater. In this case, the field is parsed as epoch time (the number of seconds since 1970-01-01T00:00 UTC) and the transaction can only be included in a block with a _Median Time Past_ (MTP) greater than the nLockTime. MTP is normally about an hour or two behind the current time. The rules for MTP are described in <>. [[coinbase_transactions]] === Coinbase Transactions The first transaction in each block is a special case. Most older documentation calls this a _generation transaction_, but most newer documentation calls it a _coinbase transaction_ (not to be confused with transactions created by the company named "Coinbase"). Coinbase transactions are created by the miner of the block that includes them and gives the miner the option to claim any fees paid by transactions in that block. Additionally, up until block 6,720,000, miners are allowed to claim a subsidy consisting of bitcoins that have never previously been circulated, called the _block subsidy_. The total amount a miner can claim for a block--the combination of fees and subsidy--is called the _block reward_. Some of the special rules for coinbase transactions include: - They may only have one input. - The single input must have outpoint with a null txid (consisting entirely of zeroes) and a maximal output index (0xffffffff). This prevents the coinbase transaction from referencing a previous transaction output, which would (at the very least) be confusing given that the coinbase transaction spends fees and subsidy. - The field which would contain a scriptSig in a normal transaction is called a _coinbase_. It's this field that gives the coinbase transaction its name. The coinbase field must be at least two bytes and not longer than 100 bytes. This script is not executed but legacy transaction limits on the number of signature-checking operations (sigops) do apply to it, so any arbitrary data placed in it should be prefixed by a data-pushing opcode. Since a 2013 soft fork defined in BIP34, the first few bytes of this field must follow additional rules we'll describe in <>. - The sum of the outputs must not exceed the value of the fees collected from all the transactions in that block plus the subsidy. The subsidy started at 50 BTC per block and halves every 210,000 blocks (approximately every four years). Subsidy values are rounded down to the nearest satoshi. - Since the 2017 soft fork documented in BIP141, any block that contains a transaction spending a segwit output must contain an output to the coinbase transaction that commits to all of the transactions in the block (including their witnesses). We'll explore this commitment in <>. A coinbase transaction can have any other outputs that would be valid in a normal transaction. However, a transaction spending one of those outputs cannot be included in any block until after the coinbase transaction has received 100 confirmations. This is called the _maturity rule_ and coinbase transaction outputs which don't yet have 100 confirmations are called _immature_. The maturity rule requires 100 blocks to be built on top of a miner's block before that miner is able to spend their block reward. //TODO:stretch goal to describe the reason for the maturity rule and, //by extension the reason for no expiring timelocks Most Bitcoin software doesn't need to deal with coinbase transactions but their special nature does mean they can occasionally be the cause of unusual problems in software that's not designed to expect them. // Useful content deleted // - no input amount in transactions // - no balances in transactions // - UTXO model theory? // Coin selection // Change // Inability for SPV clients to get old UTXOs === Weight and Vbytes Each Bitcoin block is limited in the amount of transaction data it can contain, so most Bitcoin software needs to be able to measure the transactions it creates or processes. The modern unit of measurement for Bitcoin is called _weight_. An alternative version of weight is _vbytes_, where four units of weight equal one vbyte, providing an easy comparison to the original _byte_ measurement unit used in legacy Bitcoin blocks. Blocks are limited to 4 million weight. The block header takes up 240 weight. An additional field, the transaction count, uses either 4 or 12 weight. All of the remaining weight may be used for transaction data. To calculate the weight of a particular field in transaction, the size of that serialized field in bytes is multiplied by a factor. To calculate the weight of a transaction, sum together the weights of all of its fields. The factors for each of the fields in a transaction are shown in <>. To provide an example, we also calculate the weight of each field in this chapter's example transaction from Alice to Bob. The factors, and the fields to which they are applied, were chosen to reduce the weight used when spending a UTXO. This helps discourage the creation of uneconomical outputs as described in <>. [[weight_factors]] .Weight factors for all fields in a Bitcoin transaction [cols="1,1,1"] |=== | **Field** | **Factor** | **Weight in Alice's Tx** | Version | 4 | 16 | Marker & Flag | 1 | 2 | Inputs Count | 4 | 4 | Outpoint | 4 | 144 | scriptSig | 4 | 4 | nSequence | 4 | 16 | Outputs Count | 4 | 4 | nValue | 4 | 64 (2 outputs) | scriptPubKey | 4 | 232 (2 outputs with different scripts) | Witness Count | 1 | 1 | Witnesses | 1 | 66 | nLockTime | 4 | 16 | **Total** | _N/A_ | **569** |=== We can verify our weight calculation by getting the total for Alice's transaction from Bitcoin Core: ---- $ bitcoin-cli getrawtransaction 466200308696215bbc949d5141a49a41\ 38ecdfdfaa2a8029c1f9bcecd1f96177 2 | jq .weight 569 ---- Alice's transaction from <> at the beginning of this chapter is shown represented in weight units in <>. You can see the factor at work by comparing the difference in size between the various fields in the two images. [[alice_tx_weight_map]] .A byte map of Alice's transaction image::../images/tx-weight-map.png["A weight map of Alice's transaction"] [[legacy_serialization]] === Legacy Serialization The serialization format described in this chapter is used for the majority of new Bitcoin transactions as of the writing of this book, but an older serialization format is still used for many transactions. That older format, called _legacy serialization_, must be used on the Bitcoin P2P network for any transaction with an empty witness (which is only valid if the transaction doesn't spend any witness programs). Legacy serialization does not include the marker, flag, and witness fields. In this chapter, we looked at each of the fields in a transaction and discovered how they communicate to full nodes the details about the bitcoins to be transferred between users. We only briefly looked at the scriptPubKey, scriptSig, and witness fields that allow specifying and satisfying conditions which restrict who can spend what bitcoins. Understanding how to construct and use these conditions is essential to ensuring that only Alice can spend her bitcoins, so they will be the subject of the next chapter.