[[tx_fees]] == Transaction Fees The digital signature we saw Alice create in <> only proves that she knows her private key and that she committed to a transaction that pays Bob. She can create another signature that instead commits to a transaction paying Carol--a transaction that spends the same output (bitcoins) that she used to pay Bob. Those two transactions are now _conflicting transactions_ because only one transaction spending a particular output can be included in the valid blockchain with the most proof of work--the blockchain that full nodes use to determine which keys control which bitcoins. To protect himself against conflicting transactions, it would be wise for Bob to wait until the transaction from Alice is included in the blockchain to a sufficient depth before he considers the money he received as his to spend (see <>). For Alice's transaction to be included in the blockchain, it must be included in a _block_ of transactions. There are a limited number of blocks produced in a given amount of time and each block only has a limited amount of space. Only the miner who creates that block gets to choose which transactions to include. Miners may select transactions by any criteria they want, including refusing to include any transactions at all. [NOTE] ==== When we say "transactions" in this chapter, we refer to every transaction in a block except for the first transaction. The first transaction in a block is a _coinbase transaction_, described in <>, which allows the miner of the block to collect their reward for producing the block. Unlike other transactions, a coinbase transaction doesn't spend the output of a previous transaction and is also an exception to several other rules that apply to other transactions. Coinbase transactions don't pay transaction fees, don't need to be fee bumped, aren't subject to transaction pinning, and are largely uninteresting to the following discussion about fees--so we're going to ignore them in this chapter. ==== The criterion that almost all miners use to select which transactions to include in their blocks is to maximize their revenue. Bitcoin was specifically designed to accommodate this by providing a mechanism that allows a transaction to give money to the miner who includes that transaction in a block. We call that mechanism _transaction fees_, although it's not a fee in the usual sense of that word. It's not an amount set by the protocol or by any particular miner--it's much more like a bid in an auction. The good being purchased is the portion of limited space in a block that a transaction will consume. Miners choose the set of transactions whose bids will allow them to earn the greatest revenue. In this chapter, we'll explore various aspects of those bids--transaction fees--and how they influence the creation and management of Bitcoin transactions. === Who Pays the Transaction Fee? Most payment systems involve some sort of fee for transacting, but often this fee is hidden from typical buyers. For example, a merchant may advertise the same item for the same price whether you pay with cash or a credit card even though their payment processor may charge them a higher fee for credit transactions than their bank charges them for cash deposits. In Bitcoin, every spend of bitcoins must be authenticated (typically with a signature), so it's not possible for a transaction to pay a fee without the permission of the spender. It is possible for the receiver of a transaction to pay a fee in a different transaction--and we'll see that in use later--but if we want a single transaction to pay its own fee, that fee needs to be something agreed upon by the spender. It can't be hidden. Bitcoin transactions are designed so that it doesn't take any extra space in a transaction for a spender to commit to the fee it pays. That means that, even though it's possible to pay the fee in a different transaction, it's most efficient (and thus cheapest) to pay the fee in a single transaction. In Bitcoin, the fee is a bid and the amount paid contributes to determining how long it will take the transaction to confirm. Both spenders and receivers of a payment typically have an interest in having it confirming quickly, so normally allowing only spenders to choose fees can sometimes be a problem; we'll look at a solution to that problem in <>. However, in many common payment flows, the parties with the highest desire to see a transaction confirm quickly--that is, the parties who'd be the most willing to pay higher fees--are the spenders. For those reasons, both technical and practical, it is customary in Bitcoin for spenders to pay transaction fees. There are exceptions, such as for merchants that accept unconfirmed transactions and in protocols that don't immediately broadcast transactions after they are signed (preventing the spender from being able to choose an appropriate fee for the current market). We'll explore those exceptions later. === Fees and Fee Rates Each transaction only pays a single fee--it doesn't matter how large the transaction is. However, the larger transactions become, the fewer of them a miner will be able to fit in a block. For that reason, miners evaluate transactions the same way you might comparison shop between several equivalent items at the market: they divide the price by the quantity. Whereas you might divide the cost of several different bags of rice by each bag's weight to find the lowest price per weight (best deal), miners divide the fee of a transaction by its size (also called its weight) to find the highest fee per weight (most revenue). In Bitcoin, we use the term _fee rate_ for a transaction's size divided by weight. Due to changes in Bitcoin over the years, fee rate can be expressed in different units: - BTC/Bytes (a legacy unit rarely used anymore) - BTC/Kilobytes (a legacy unit rarely used anymore) - BTC/Vbytes (rarely used) - BTC/Kilo-vbyte (used mainly in Bitcoin Core) - Satoshi/Vbyte (most commonly used today) - Satoshi/Weight (also commonly used today) We recommend either the sat/vbyte or sat/weight units for displaying fee rates. [WARNING] ==== Be careful accepting input for fee rates. If a user copies and pastes a fee rate printed in one denominator into a field using a different enumerator, they could overpay fees by 1,000 times. If they instead switch the enumerator, they could theoretically overpay by 100,000,000 times. Wallets should make it hard for the user to pay an excessive fee rate and may want to prompt the user to confirm any fee rate that was not generated by the wallet itself using a trusted data source. An excessive fee, also called an _absurd fee_, is any fee rate that's significantly higher than the amount that fee rate estimators currently expect is necessary to get a transaction confirmed in the next block. Note that wallets should not entirely prevent users from choosing an excessive fee rate--they should only make using such a fee rate hard to do by accident. There are legitimate reasons for users to overpay fees on rare occasions. ==== === Estimating Appropriate Fee Rates We've established that you can pay a lower fee rate if you're willing to wait longer for your transaction to be confirmed, with the exception that paying too low of a fee rate could result in your transaction never confirming. Because fee rates are bids in an open auction for block space, it's not possible to perfectly predict what fee rate you need to pay to get your transaction confirmed by a certain time. However, we can generate a rough estimate based on what fee rates other transactions have paid in the recent past. A full node can record three pieces of information about each transactions it sees: the time (block height) when it first received that transaction, the block height when that transaction was confirmed, and the fee rate paid by that transaction. By grouping together transactions that arrived at similar heights, were confirmed at similar heights, and which paid similar fees, we can calculate how many blocks it took to confirm transactions paying a certain fee rate. We can then assume that a transaction paying a similar fee rate now will take a similar number of blocks to confirm. Bitcoin Core includes a fee rate estimator that uses these principles, which can be called using the `estimatesmartfee` RPC with a parameter specifying how many blocks you're willing to wait before the transaction is highly likely to confirm (for example, 144 blocks is about 1 day): ---- $ bitcoin-cli -named estimatesmartfee conf_target=144 { "feerate": 0.00006570, "blocks": 144 } ---- Many web-based services also provide fee estimation as an API. For a current list, see https://oreil.ly/TB6IN. As mentioned, fee rate estimation can never be perfect. One common problem is that the fundamental demand might change, adjusting the equilibrium and either increasing prices (fees) to new heights or decreasing them toward the minimum. If fee rates go down, then a transaction that previously paid a normal fee rate might now be paying a high fee rate and it will be confirmed earlier than expected. There's no way to lower the fee rate on a transaction you've already sent, so you're stuck paying a higher fee rate. But, when fee rates go up, there's a need for methods to be able to increase the fee rates on those transactions, which is called _fee bumping_. There are two commonly used types of fee bumping in Bitcoin, replace by fee (RBF) and child pays for parent (CPFP). [[rbf]] === Replace By Fee (RBF) Fee Bumping To increase the fee of a transaction using RBF fee bumping, you create a conflicting version of the transaction that pays a higher fee. Two or more transactions are considered to be _conflicting transactions_ if only one of them can be included in a valid blockchain, forcing a miner to choose only one of them. Conflicts occur when two or more transactions each try to spend one of the same UTXOs, i.e., they each include an input that has the same outpoint (reference to the output of a previous transaction). To prevent someone from consuming large amounts of bandwidth by creating an unlimited number of conflicting transactions and sending them through the network of relaying full nodes, Bitcoin Core and other full nodes that support transaction replacement require each replacement transaction to pay a higher fee rate than the transaction being replaced. Bitcoin Core also currently requires the replacement transaction to pay a higher total fee than the original transaction, but this requirement has undesired side effects and developers have been looking for ways to remove it at the time of writing. Bitcoin Core currently supports two variations of RBF: Opt-in RBF:: An unconfirmed transaction can signal to miners and full nodes that the creator of the transaction wants to allow it to be replaced by a higher fee rate version. This signal and the rules for using it are specified in BIP125. As of this writing, this has been enabled by default in Bitcoin Core for several years. Full RBF:: Any unconfirmed transaction can be replaced by a higher fee rate version. As of this writing, this can be optionally enabled in Bitcoin Core (but it is disabled by default). .Why Are There Two Variants of RBF? **** The reason for the two different versions of RBF is that full RBF has been controversial. Early versions of Bitcoin allowed transaction replacement but this behavior was disabled for several releases. During that time, a miner or full node using the software now called Bitcoin Core would not replace the first version of an unconfirmed transaction they received with any different version. Some merchants came to expect this behavior: they assumed that any valid unconfirmed transaction which paid an appropriate fee rate would eventually become a confirmed transaction, so they provided their goods or services shortly after receiving such an unconfirmed transaction. However, there's no way for the Bitcoin protocol to guarantee that any unconfirmed transaction will eventually be confirmed. As mentioned earlier in this chapter, every miner gets to choose for themselves which transactions they will try to confirm--including which versions of those transactions. Bitcoin Core is open source software, so anyone with a copy of its source code can add (or remove) transaction replacement. Even if Bitcoin Core wasn't open source, Bitcoin is an open protocol that can be reimplemented from scratch by a sufficiently competent programmer, allowing the reimplementor to include or not include transaction replacement. Transaction replacement breaks the assumption of some merchants that every reasonable unconfirmed transaction will eventually be confirmed. An alternative version of a transaction can pay the same outputs as the original, but it isn't required to pay any of those outputs. If the first version of an unconfirmed transaction pays a merchant, the second version might not pay them. If the merchant provided goods or services based on the first version, but the second version gets confirmed, then the merchant will not receive payment for its costs. Some merchants, and people supporting them, requested that transaction replacement not be reenabled in Bitcoin Core. Other people pointed out that transaction replacement provides benefits, including the ability to fee bump transactions that initially paid too low of a fee rate. Eventually, developers working on Bitcoin Core implemented a compromise: instead of allowing every unconfirmed transaction to be replaced (full RBF), they only programmed Bitcoin Core to allow replacement of transactions that signaled they wanted to allow replacement (opt-in RBF). Merchants can check the transactions they receive for the opt-in signal and treat those transactions differently than those without the signal. This doesn't change the fundamental concern: anyone can still alter their copy of Bitcoin Core, or create a reimplementation, to allow full RBF--and some developers even did this, but seemingly few people used their software. After several years, developers working on Bitcoin Core changed the compromise slightly. In addition to keeping opt-in RBF by default, they added an option that allows users to enable full RBF. If enough mining hash rate and relaying full nodes enable this option, it will be possible for any unconfirmed transaction to eventually be replaced by a version paying a higher fee rate. As of this writing, it's not clear whether or not that has happened yet. **** As a user, if you plan to use RBF fee bumping, you will first need to choose a wallet that supports it, such as one of the wallets listed as having "Sending support" on https://oreil.ly/IhMzx. As a developer, if you plan to implement RBF fee bumping, you will first need to decided whether to perform opt-in RBF or full RBF. At the time of writing, opt-in RBF is the only method that's sure to work. Even if full RBF becomes reliable, there will likely be several years where replacements of opt-in transactions get confirmed slightly faster than full-RBF replacements. If you choose opt-in RBF, your wallet will need to implement the signaling specified in BIP125, which is a simple modification to any one of the sequence fields in a transaction (see <>). If you choose full RBF, you don't need to include any signaling in your transactions. Everything else related to RBF is the same for both approaches. When you need to fee bump a transaction, you will simply create a new transaction that spends at least one of the same UTXOs as the original transaction you want to replace. You will likely want to keep the same outputs in the transaction that pay the receiver (or receivers). You may pay the increased fee by reducing the value of your change output or by adding additional inputs to the transaction. Developers should provide users with a fee-bumping interface that does all of this work for them and simply asks them (or suggests to them) how much the fee rate should be increased. [WARNING] ==== Be very careful when creating more than one replacement of the same transaction. You must ensure than all versions of the transactions conflict with each other. If they aren't all conflicts, it may be possible for multiple separate transactions to confirm, leading you to overpay the receivers. For example: - Transaction version 0 includes input _A_. - Transaction version 1 includes inputs _A_ and _B_ (e.g., you had to add input _B_ to pay the extra fees) - Transaction version 2 includes inputs _B_ and _C_ (e.g., you had to add input _C_ to pay the extra fees but _C_ was large enough that you no longer need input _A_). In this scenario, any miner who saved version 0 of the transaction will be able to confirm both it and version 2 of the transaction. If both versions pay the same receivers, they'll be paid twice (and the miner will receive transaction fees from two separate transactions). A simple method to avoid this problem is to ensure the replacement transaction always includes all of the same inputs as the previous version of the transaction. ==== The advantage of RBF fee bumping over other types of fee bumping is that it can be very efficient at using block space. Often, a replacement transaction is the same size as the transaction it replaces. Even when it's larger, it's often the same size as the transaction the user would have created if they had paid the increased fee rate in the first place. The fundamental disadvantage of RBF fee bumping is that it can normally only be performed by the creator of the transaction--the person or people who were required to provide signatures or other authentication data for the transaction. An exception to this is transactions that were designed to allow additional inputs to be added by using sighash flags (see <>), but that presents its own challenges. In general, if you're the receiver of an unconfirmed transaction and you want to make it confirm faster (or at all), you can't use an RBF fee bump; you need some other method. There are additional problems with RBF that we'll explore in <>. [[cpfp]] === Child Pays for Parent (CPFP) Fee Bumping Anyone who receives the output of an unconfirmed transaction can incentivize miners to confirm that transaction by spending that output. The transaction you want to get confirmed is called the _parent transaction_. A transaction that spends an output of the parent transaction is called a _child transaction_. As we learned in <>, every input in a confirmed transaction must reference the unspent output of a transaction that appears earlier in the blockchain (whether earlier in the same block or in a previous block). That means a miner who wants to confirm a child transaction must also ensure that its parent transaction is confirmed. If the parent transaction hasn't been confirmed yet but the child transaction pays a high enough fee, the miner can consider whether it would be profitable to confirm both of them in the same block. To evaluate the profitability of mining both a parent and child transaction, the miner looks at them as a _package of transactions_ with an aggregate size and aggregate fees, from which the fees can be divided by the size to calculate a _package fee rate_. The miner can then sort all of the individual transactions and transaction packages they know about by fee rate and include the highest-revenue ones in the block they're attempting to mine, up to the maximum size (weight) allowed to be included in a block. To find even more packages that might be profitable to mine, the miner can evaluate packages across multiple generations (e.g., an unconfirmed parent transaction being combined with both its child and grandchild). This is called _ancestor fee rate mining_. Bitcoin Core has implemented ancestor fee rate mining for many years, and it's believed that almost all miners use it at the time of writing. That means it's practical for wallets to use this feature to fee bump an incoming transaction by using a child transaction to pay for its parent (CPFP). CPFP has several advantages over RBF. Anyone who receives an output from a transaction can use CPFP--that includes both the receivers of payments and the spender (if the spender included a change output). It also doesn't require replacing the original transaction, which makes it less disruptive to some merchants than RBF. The primary disadvantage of CPFP compared to RBF is that CPFP typically uses more block space. In RBF, a fee bump transaction is often the same size as the transaction it replaces. In CPFP, a fee bump adds a whole separate transaction. Using extra block space requires paying extra fees beyond the cost of the fee bump. There are several challenges with CPFP, some of which we'll explore in <>. One other problem that we specifically need to mention is the minimum relay fee rate problem, which is addressed by package relay. === Package Relay Early versions of Bitcoin Core didn't place any limits on the number of unconfirmed transactions they stored for later relay and mining in their mempools (see <>). Of course, computers have physical limits, whether it's the memory (RAM) or disk space--it's not possible for a full node to store an unlimited number of unconfirmed transactions. Later versions of Bitcoin Core limited the size of the mempool to hold about one day's worth of transactions, storing only the transactions or packages with the highest fee rate. That works extremely well for most things, but it creates a dependency problem. In order to calculate the fee rate for a transaction package, we need both the parent and descendant transactions--but if the parent transaction doesn't pay a high enough fee rate, it won't be kept in a node's mempool. If a node receives a child transaction without having access to its parent, it can't do anything with that transaction. The solution to this problem is the ability to relay transactions as a package, called _package relay_, allowing the receiving node to evaluate the fee rate of the entire package before operating on any individual transaction. As of this writing, developers working on Bitcoin Core have made significant progress on implementing package relay and a limited early version of it may be available by the time this book is published. Package relay is especially important for protocols based on time-sensitive presigned transactions, such as Lightning Network. In non-cooperative cases, some presigned transactions can't be fee bumped using RBF, forcing them to depend on CPFP. In those protocols, some transactions may also be created long before they need to be broadcast, making it effectively impossible to estimate an appropriate fee rate. If a presigned transaction pays a fee rate below the amount necessary to get into a node's mempool, there's no way to fee bump it with a child. If that prevents the transaction from confirming in time, an honest user might lose money. Package relay is the solution for this critical problem. [[transaction_pinning]] === Transaction Pinning Although both RBF and CPFP fee bumping work in the basic cases we described, there are rules related to both methods that are designed to prevent denial-of-service attacks on miners and relaying full nodes. An unfortunate side effect of those rules is that they can sometimes prevent someone from being able to use fee bumping. Making it impossible or difficult to fee bump a transaction is called _transaction pinning_. One of the major denial of service concerns revolves around the effect of transaction relationships. Whenever the output of a transaction is spent, that transaction's identifier (txid) is referenced by the child transaction. However, when a transaction is replaced, the replacement has a different txid. If that replacement transaction gets confirmed, none of its descendants can be included in the same blockchain. It's possible to re-create and re-sign the descendant transactions, but that's not guaranteed to happen. This has related but divergent implications for RBF and CPFP: - In the context of RBF, when Bitcoin Core accepts a replacement transaction, it keeps things simple by forgetting about the original transaction and all descendant transactions that depended on that original. To ensure that it's more profitable for miners to accept replacements, Bitcoin Core only accepts a replacement transaction if it pays more fees than all the transactions that will be forgotten. + The downside of this approach is that Alice can create a small transaction that pays Bob. Bob can then use his output to create a large child transaction. If Alice then wants to replace her original transaction, she needs to pay a fee that's larger than what both she and Bob originally paid. For example, if Alice's original transaction was about 100 vbytes and Bob's transaction was about 100,000 vbytes, and they both used the same fee rate, Alice now needs to pay more than 1,000 times as much as she originally paid in order to RBF fee bump her transaction. - In the context of CPFP, any time the node considers including a package in a block, it must remove the transactions in that package from any other package it wants to consider for the same block. For example, if a child transaction pays for 25 ancestors, and each of those ancestors has 25 other children, then including the package in the block requires updating approximately 625 packages (25^2^). Similarly, if a transaction with 25 descendants is removed from a node's mempool (such as for being included in a block), and each of those descendants has 25 other ancestors, another 625 packages need to be updated. Each time we double our parameter (e.g., from 25 to 50), we quadruple the amount of work our node needs to perform. + Additionally, a transaction and all of its descendants is not useful to keep in a mempool long term if an alternative version of that transaction is mined--none of those transactions can now be confirmed unless there's a rare blockchain reorganization. Bitcoin Core will remove from its mempool every transaction that can no longer be confirmed on the current blockchain. At it's worst, that can waste an enormous amount of your node's bandwidth and possibly be used to prevent transactions from propagating correctly. + To prevent these problems, and other related problems, Bitcoin Core limits a parent transaction to having a maximum of 25 ancestors or descendants in its mempool and limits the total size of all those transactions to 100,000 vbytes. The downside of this approach is that users are prevented from creating CPFP fee bumps if a transaction already has too many descendants (or if it and its descendants are too large). Transaction pinning can happen by accident, but it also represents a serious vulnerability for multiparty time-sensitive protocols such as Lightning Network. If your counterparty can prevent one of your transactions from confirming by a deadline, they may be able to steal money from you. Protocol developers have been working on mitigating problems with transaction pinning for several years. One partial solution is described in <>. Several other solutions have been proposed, and at least one solution is being actively developed as of this writing—https://oreil.ly/300dv[ephemeral anchors]. [[cpfp_carve_out]] === CPFP Carve Out and Anchor Outputs In 2018, developers working on Lightning Network (LN) had a problem. Their protocol uses transactions that require signatures from two different parties. Neither party wants to trust the other, so they sign transactions at a point in the protocol when trust isn't needed, allowing either of them to broadcast one of those transactions at a later time when the other party may not want to (or be able to) fulfill its obligations. The problem with this approach is that the transactions might need to be broadcast at an unknown time, far in the future, beyond any reasonable ability to estimate an appropriate fee rate for the transactions. In theory, the developers could have designed their transactions to allow fee bumping with either RBF (using special sighash flags) or CPFP, but both of those protocols are vulnerable to transaction pinning. Given that the involved transactions are time sensitive, allowing a counterparty to use transaction pinning to delay confirmation of a transaction can easily lead to a repeatable exploit that malicious parties could use to steal money from honest parties. LN developer Matt Corallo proposed a solution: give the rules for CPFP fee bumping a special exception, called _CPFP carve out_. The normal rules for CPFP forbid the inclusion of an additional descendant if it would cause a parent transaction to have 26 or more descendants or if it would cause a parent and all of its descendants to exceed 100,000 vbytes in size. Under the rules of CPFP carve out, a single additional transaction up to 1,000 vbytes in size can be added to a package even if it would exceed the other limits as long as it is a direct child of an unconfirmed transaction with no unconfirmed ancestors. For example, Bob and Mallory both co-sign a transaction with two outputs, one to each of them. Mallory broadcasts that transaction and uses her output to attach either 25 child transactions or any smaller number of child transactions equaling 100,000 vbytes in size. Without carve-out, Bob would be unable to attach another child transaction to his output for CPFP fee bumping. With carve-out, he can spend one of the two outputs in the transaction, the one that belongs to him, as long as his child transaction is less than 1,000 vbytes in size (which should be more than enough space). It's not allowed to use CPFP carve-out more than once, so it only works for two-party protocols. There have been proposals to extend it to protocols involving more participants, but there hasn't been much demand for that and developers are focused on building more generic solutions to transaction pinning attacks. As of this writing, most popular LN implementations use a transaction template called _anchor outputs_, which is designed to be used with CPFP carve out. === Adding Fees to Transactions The data structure of transactions does not have a field for fees. Instead, fees are implied as the difference between the sum of inputs and the sum of outputs. Any excess amount that remains after all outputs have been deducted from all inputs is the fee that is collected by the miners: [[tx_fee_equation]] .Transaction fees are implied, as the excess of inputs minus outputs: ---- Fees = Sum(Inputs) – Sum(Outputs) ---- This is a somewhat confusing element of transactions and an important point to understand, because if you are constructing your own transactions you must ensure you do not inadvertently include a very large fee by underspending the inputs. That means that you must account for all inputs, if necessary by creating change, or you will end up giving the miners a very big tip! For example, if you spend a 20-bitcoin UTXO to make a 1-bitcoin payment, you must include a 19-bitcoin change output back to your wallet. Otherwise, the 19-bitcoin "leftover" will be counted as a transaction fee and will be collected by the miner who mines your transaction in a block. Although you will receive priority processing and make a miner very happy, this is probably not what you intended. [WARNING] ==== If you forget to add a change output in a manually constructed transaction, you will be paying the change as a transaction fee. "Keep the change!" might not be what you intended. ==== [[fee_sniping]] === Timelock Defense Against Fee Sniping Fee sniping is a theoretical attack scenario, where miners attempting to rewrite past blocks "snipe" higher-fee transactions from future blocks to maximize their profitability. For example, let's say the highest block in existence is block #100,000. If instead of attempting to mine block #100,001 to extend the chain, some miners attempt to remine #100,000. These miners can choose to include any valid transaction (that hasn't been mined yet) in their candidate block #100,000. They don't have to remine the block with the same transactions. In fact, they have the incentive to select the most profitable (highest fee per kB) transactions to include in their block. They can include any transactions that were in the "old" block #100,000, as well as any transactions from the current mempool. Essentially they have the option to pull transactions from the "present" into the rewritten "past" when they re-create block #100,000. Today, this attack is not very lucrative, because the block subsidy is much higher than total fees per block. But at some point in the future, transaction fees will be the majority of the reward (or even the entirety of the reward). At that time, this scenario becomes inevitable. Several wallets discourage fee sniping by creating transactions with a lock time that limits those transactions to being included in the next block or any later block. In our scenario, our wallet would set lock time to 100,001 on any transaction it created. Under normal circumstances, this lock time has no effect—the transactions could only be included in block #100,001 anyway; it's the next block. But under a reorganization attack, the miners would not be able to pull high-fee transactions from the mempool, because all those transactions would be timelocked to block #100,001. They can only remine #100,000 with whatever transactions were valid at that time, essentially gaining no new fees. This does not entirely prevent fee sniping, but it does make it less profitable in some cases and so can help preserve the stability of the Bitcoin network as the block subsidy declines. We recommend all wallets implement anti fee sniping when it doesn't interfere with the wallet's other uses of the lock time field. As Bitcoin continues to mature, and as the subsidy continues to decline, fees become more and more important to Bitcoin users, both in their day-to-day use for getting transactions confirmed quickly and in providing an incentive for miners to continue securing Bitcoin transactions with new proof of work.