# # Copyright (c) 2020 Bitdefender # SPDX-License-Identifier: Apache-2.0 # import os import sys import re import glob valid_attributes = { 'MODRM', # Mod r/m is present. 'II64', # Instruction invalid in 64 bit mode. 'F64', # Operand size forced to 64 bit. 'D64', # Operand size defaults to 64 bit. 'O64', # Instruction valid only in 64 bit mode. 'SSECONDB', # Instruction has condition byte. 'COND', # Instruction has predicated encoded in lower 4 bit of the opcode. 'VSIB', # Instruction uses VSIB addressing. 'MIB', # Instruction uses MIB addressing. 'LIG', # *vex.L is ignored. 'WIG', # *vex.W is ignored. '3DNOW', # Instruction uses 3dnow encoding. 'MMASK', # Instruction must have mask specified (mask cannot be k0). 'NOMZ', # Zeroing not allowed with memory addressing. 'LOCKSP', # Special lock - MOV CR on amd can use LOCK to access CR8 in 32 bit mode. 'NOL0', # Vector length 128 not supported. 'NOA16', # 16 bit addressing not supported. 'NO66', # 0x66 prefix causes #UD. 'NORIPREL', # RIP relative addressing not supported. 'VECT', # Vector instruction. 'S66', # 0x66 prefix changes length even if it is in special map (66, f2, f3). 'BITBASE', # Instruction uses bitbase addressing. 'AG', # Instruction uses address generation, no memory access. 'SHS', # Instruction accesses the shadow stack. 'MFR', # The Mod inside Mod R/M is forced to register. No SIB/disp present. 'CETT', # Instruction is CET tracked. 'OP1DEF', # Operand 1 is default (implicit). 'OP2DEF', # Operand 2 is default (implicit). 'OP2SEXO1', # Operand 2 is sign-extended to the size of the first operand. 'OP3SEXO1', # Operand 3 is sign-extended to the size of the first operand. 'OP1SEXDW', # Operand 1 is sign-extended to the size of the default word. 'PREFIX', # Prefix. 'SERIAL', # Instruction is serializing. 'SIBMEM', # Instruction uses sibmem addressing (AMX instructions). 'I67', # Ignore the address size override (0x67) prefix in 64 bit mode. 'IER', # Ignore embedded rounding for the instruction. } # # Explicit operands types. # valid_optype = [ 'A', # Direct address: the instruction has no ModR/M byte; the address of the # operand is encoded in the instruction. No base register, index register, # or scaling factor can be applied (for example, far JMP (EA)). 'B', # The VEX.vvvv field of the VEX prefix selects a general purpose register. 'C', # The reg field of the ModR/M byte selects a control register (for example, # MOV (0F20, 0F22)). 'D', # The reg field of the ModR/M byte selects a debug register (for example, # MOV (0F21,0F23)). 'E', # A ModR/M byte follows the opcode and specifies the operand. The operand # is either a general-purpose register or a memory address. If it is a # memory address, the address is computed from a segment register and any # of the following values: a base register, an index register, a scaling # factor, a displacement. 'F', # EFLAGS/RFLAGS Register. 'G', # The reg field of the ModR/M byte selects a general register (for example, # AX (000)). 'H', # The VEX.vvvv field of the VEX prefix selects a 128-bit XMM register or a # 256-bit YMM register, determined by operand type. For legacy SSE # encodings this operand does not exist, changing the instruction to # destructive form. Addition: 512 bit ZMM register may also be selected in # EVEX encodings. 'I', # Immediate data: the operand value is encoded in subsequent bytes of the # instruction. 'J', # The instruction contains a relative offset to be added to the instruction # pointer register (for example, JMP (0E9), LOOP). 'K', # The operand is the stack. 'L', # The upper 4 bits of the 8-bit immediate selects a 128-bit XMM register # or a 256-bit YMM register, determined by operand type. (the MSB is # ignored in 32-bit mode). Addition: a 512 bit ZMM register may also be # selected using EVEX encoding. 'M', # The ModR/M byte may refer only to memory (for example, BOUND, LES, LDS, # LSS, LFS, LGS, CMPXCHG8B). 'N', # The R/M field of the ModR/M byte selects a packed-quadword, MMX # technology register. 'O', # The instruction has no ModR/M byte. The offset of the operand is coded # as a word or double word (depending on address size attribute) in the # instruction. No base register, index register, or scaling factor can be # applied (for example, MOV (A0-A3)). 'P', # The reg field of the ModR/M byte selects a packed quadword MMX technology # register. 'Q', # A ModR/M byte follows the opcode and specifies the operand. The operand # is either an MMX technology register or a memory address. If it is a # memory address, the address is computed from a segment register and any # of the following values: a base register, an index register, a scaling # factor, and a displacement. 'R', # The R/M field of the ModR/M byte may refer only to a general register # (for example, MOV (0F20-0F23)). 'S', # The reg field of the ModR/M byte selects a segment register (for example, MOV (8C,8E)). 'T', # The reg field of the ModR/M byte selects a test register (for example, MOV (0F24, 0F26)). 'U', # The R/M field of the ModR/M byte selects a 128-bit XMM register or a 256-bit YMM register, # determined by operand type. Addition: a 512-bit ZMM register may also be selected using EVEX # encodings. 'V', # The reg field of the ModR/M byte selects a 128-bit XMM register or a 256-bit YMM register, # determined by operand type. Addition: a 512-bit ZMM register may also be selected using # EVEX encodings. 'W', # A ModR/M byte follows the opcode and specifies the operand. The operand is either a 128-bit # XMM register, a 256-bit YMM register (determined by operand type), or a memory address. If it is # a memory address, the address is computed from a segment register and any of the following values: # a base register, an index register, a scaling factor, and a displacement. Addition:a 512-bit ZMM # register may also be selected # using EVEX encodings. 'X', # Memory addressed by the DS:rSI register pair (for example, MOVS, CMPS, OUTS, or LODS). 'Y', # Memory addressed by the ES:rDI register pair (for example, MOVS, CMPS, INS, STOS, or SCAS). 'Z', # The low 3 bits inside the opcode select a general purpose register. R field inside REX may # extend it. 'rB', # The reg field selects a BND register. 'mB', # The rm field selects A BND register or a memory location. 'rK', # The reg field selects a mask register. 'vK', # The vvvv field of the VEX prefix selects a mask register. 'mK', # The rm field selects e mask register. 'aK', # The aaa field inside evex selects a mask register which is used for masking of a destination # operand. 'rM', # The reg field inside modrm encodes the base address of a memory operand. Default segment is ES. 'mM', # The rm field inside modrm encodes the base address of a memory operand, iregardless of the mod # fields. Default segment is DS. 'rT', # The reg field inside modrm encodes a TMM register (AMX extension). 'mT', # The rm field inside modrm encodes a TMM register (AMX extension). 'vT', # The v field inside vex encodes a TMM register (AMX extension). 'm2zI', # Bits [1,0] of the immediate byte which selects the fourth register. ] # Operand sizes. valid_opsize = [ 'a', # Two one-word operands in memory or two double-word operands in memory, # depending on operand-size attribute (used only by the BOUND instruction). 'b', # Byte, regardless of operand-size attribute. 'c', # Byte or word, depending on operand-size attribute. 'd', # Doubleword, regardless of operand-size attribute. 'dq', # Double-quadword, regardless of operand-size attribute (XMM register or # 128 bit memory location). A smaller quantity from the 128 bit register may be accessed. 'e', # eighth = word or dword or qword. 'f', # fourth = dword or qword or oword. 'h', # half = qword or oword or yword. 'n', # normal = 128, 256 or 512 bits, depending on vector length. 'u', # 256 or 512 bit, depending on vector length. # VSIB addressing 'vm32x', # VSIB addressing, using DWORD indices in XMM register, select 32/64 bit. 'vm32y', # VSIB addressing, using DWORD indices in YMM register, select 32/64 bit. 'vm32z', # VSIB addressing, using DWORD indices in ZMM register, select 32/64 bit. 'vm32h', # VSIB addressing, using DWORD indices in half register, select 32/64 bit. 'vm32n', # VSIB addressing, using DWORD indices in normal register, select 32/64 bit. 'vm64x', # VSIB addressing, using QWORD indices in XMM register, select 32/64 bit. 'vm64y', # VSIB addressing, using QWORD indices in YMM register, select 32/64 bit. 'vm64z', # VSIB addressing, using QWORD indices in ZMM register, select 32/64 bit. 'vm64h', # VSIB addressing, using QWORD indices in half register, select 32/64 bit. 'vm64n', # VSIB addressing, using QWORD indices in normal register, select 32/64 bit. # MIB addressing 'mib', # MIB addressing, the base & the index are used to form a pointer. # Stack sizes and partial access 'v2', # Two stack words. 'v3', # Three stack words. 'v4', # Four stack words. 'v8', # Eight stack words. # These are aliased over 'dq.*' encodings. 'o', # Always 128 bits/2 QWORDs. Same as 'dq'. 'oq', # 512 bit regardless the operand size/vector length. 'p', # 32, 48 or 80 bits pointer, depending on operand size. 'pd', # 128 bit or 256 bit double-precision fp data. 'ps', # 128 bit or 256 bit single-prevision fp data. 'q', # Always 1 QWORD. 'qq', # Always 4 QWORDs. 's', # 6-byte or 10-byte pseudo-descriptor. 'sd', # Scalar element of 128 bit double-precision fp data. 'ss', # Scalar element of 128 bit single-precision fp data. 'v', # WORD, DWORD or QWORD, depending on operand size. 'w', # Always WORD. 'x', # 128 bit, 256 bit, depending on operand size. 'y', # DWORD or QWORD, depending on operand size. 'yf', # Always QWORD in 64 bit mode and DWORD in 16/32 bit mode. 'z', # WORD for 16 bit op size, DWORD for 32 & 64 bit operand size. '?', # Unknown operand size. Depends on many factors (for example, XSAVE). '0', # Used for instructions that do not actually access any memory. 'asz', # The size of the operand is given by the current addressing mode. 'ssz', # The size of the operand is given by the current stack mode. 'fa', # FPU integer binary coded decimal. 'fw', # FPU real word. 'fd', # FPU real dword. 'fq', # FPU real qword. 'ft', # FPU real extended. 'fe', # FPU environment. 'fs', # FPU state. 'l', # Either a 64 bit or a 128 bit operand size (used by BNDMOV). 'rx', # 512 bytes extended state. 'cl', # 32/64/128 bytes - the size of one cache line. '12', # 4 bytes (0) + 8 bytes (old SSP), used by SAVEPREVSSP. 't', # A tile register. The size varies dependning on execution environment, but can be as high as 1K. '384', # 384 bits representing a Key Locker handle. '512', # 512 bits representing a Key Locker handle. ] # Implicit/fixed operands. Self explanatory. valid_impops = {# register size 'AH' : ('AH', 'b'), # AH register. 'AL' : ('rAX', 'b'), # AL register. 'AX' : ('rAX', 'w'), # AX register. 'EAX' : ('rAX', 'd'), # EAX register. 'RAX' : ('rAX', 'q'), # RAX register. 'eAX' : ('rAX', 'z'), # AX or EAX register, depending on op size. 'rAX' : ('rAX', 'v'), # AX, EAX or RAX register, depending on op size. 'yAX' : ('rAX', 'y'), # EAX or RAX register, depending on op size. 'CL' : ('rCX', 'b'), # CL register. 'ECX' : ('rCX', 'd'), # ECX register. 'RCX' : ('rCX', 'q'), # RCX register. 'eCX' : ('rCX', 'z'), # CX or ECX register. 'rCX' : ('rCX', 'v'), # CX, ECX or RCX register, depending on op size. 'yCX' : ('rCX', 'y'), # ECX or RCX register, depending on op size. 'aCX' : ('rCX', 'asz'), # CX, ECX or RCX register, depedning on address size. 'DX' : ('rDX', 'w'), # DX register. 'EDX' : ('rDX', 'd'), # EDX register. 'RDX' : ('rDX', 'q'), # RDX register. 'eDX' : ('rDX', 'z'), # DX or EDX register, depending on op size. 'rDX' : ('rDX', 'v'), # DX, EDX or RDX register, depending on op size. 'yDX' : ('rDX', 'y'), # EDX or RDX register, depending on op size. 'EBX' : ('rBX', 'd'), # EBX register. 'RBX' : ('rBX', 'q'), # RBX register. 'rBX' : ('rBX', 'v'), # BX, EBX or RBX register, depending on op size. 'yBX' : ('rBX', 'y'), # EBX or RBX register, depending on op size. 'rBP' : ('rBP', 'v'), # BP, EBP or RBP register, depending on op size. 'sBP' : ('rBP', 'ssz'), # BP, EBP or RBP register, depending on stack size. 'rSP' : ('rSP', 'v'), # SP, ESP or RSP register, depending on op size. 'sSP' : ('rSP', 'ssz'), # SP, ESP or RSP register, depending on stack size. 'aSI' : ('rSI', 'asz'), # SI, ESI, or RSI register, depending on address size. 'aDI' : ('rDI', 'asz'), # DI, EDI, or RDI register, depending on address size. 'R8' : ('rR8', 'q'), # R8 register. 'R9' : ('rR9', 'q'), # R9 register. 'R11' : ('rR11', 'q'), # R11 register. 'rIP' : ('rIP', 'v'), # IP, EIP or RIP, depending on op size. 'yIP' : ('rIP', 'yf'), # EIP in 16/32 bit mode, or RIP in 64 bit mode. '1' : ('1', 'b'), # Constant 1. 'XMM0' : ('XMM0', 'dq'), # XMM0 register. 'XMM1' : ('XMM1', 'dq'), # XMM1 register. 'XMM2' : ('XMM2', 'dq'), # XMM2 register. 'XMM3' : ('XMM3', 'dq'), # XMM3 register. 'XMM4' : ('XMM4', 'dq'), # XMM4 register. 'XMM5' : ('XMM5', 'dq'), # XMM5 register. 'XMM6' : ('XMM6', 'dq'), # XMM6 register. 'XMM7' : ('XMM7', 'dq'), # XMM7 register. 'ST(0)' : ('ST(0)', 'ft'), # ST(0) register. 'ST(i)' : ('ST(i)', 'ft'), # ST(1) register. 'CS' : ('CS', 'v'), # CS register. 'SS' : ('SS', 'v'), # SS register. 'DS' : ('DS', 'v'), # DS register. 'ES' : ('ES', 'v'), # ES register. 'FS' : ('FS', 'v'), # FS register. 'GS' : ('GS', 'v'), # GS register. 'CR0' : ('CR0', 'yf'), # CR0 register. 'XCR' : ('XCR', 'q'), # An XCR register. 'XCR0' : ('XCR0', 'q'), # XCR0 register. 'MSR' : ('MSR', 'q'), # A MSR. 'TSC' : ('TSC', 'q'), # TSC register. 'TSCAUX' : ('TSCAUX', 'q'), # TSXAUX register. 'SCS' : ('SCS', 'q'), # IA32_SYSNETER_CS register. 'SEIP' : ('SEIP', 'q'), # IA32_SYSENTER_EIP register. 'SESP' : ('SESP', 'q'), # IA32_SYSENTER_ESP register. 'FSBASE' : ('FSBASE', 'q'), # IA32_FS_BASE register. 'GSBASE' : ('GSBASE', 'q'), # IA32_GS_BASE register. 'KGSBASE' : ('KGSBASE', 'q'), # IA32_KERNEL_GS_BASE register. 'STAR' : ('STAR', 'q'), # IA32_STAR register. 'LSTAR' : ('LSTAR', 'q'), # IA32_LSTAR register. 'FMASK' : ('FMASK', 'q'), # IA32_FMASK register. 'GDTR' : ('GDTR', 's'), # GDT register. 'IDTR' : ('IDTR', 's'), # IDT register. 'LDTR' : ('LDTR', 'w'), # LDT register. 'TR' : ('TR', 'w'), # Task register. 'BANK' : ('BANK', '?'), # A register bank. 'X87CONTROL':('X87CONTROL', 'w'), # X87 control register. 'X87TAG' : ('X87TAG', 'w'), # X87 tag register. 'X87STATUS': ('X87STATUS', 'w'), # X87 status register. 'MXCSR' : ('MXCSR', 'd'), # MXCSR register. 'PKRU' : ('PKRU', 'd'), # PKRU register. 'SSP' : ('SSP', 'yf'), # Shadow stack pointer. 32 bit in protected/compat mode, 64 in long mode. # Implicit memory operands. 'pBXALb' : ('pBXAL', 'b'), # Implicit [RBX + AL], as used by XLAT. 'pDIq' : ('pDI', 'q'), # Implicit qword [RDI]. 'pDIdq' : ('pDI', 'dq'), # Implicit xmmword [RDI]. # Implicit shadow stack accesses. 'SHS' : ('SHS', 'q'), # Shadow stack (SSP) implicit access, 1 qword (use by CET instructions). 'SHS0' : ('SHS0', 'q'), # Shadow stack (IA32_PL0_SSP) implicit access, 1 qword (use by CET instructions). 'SHSI' : ('SHS', 'v2'), # Shadow stack load & discard, 2 elements (INCCSPD/INCSSPQ). 'SHSS' : ('SHS', '12'), # Shadow stack read & store 4 + 8 bytes (SAVEPREVSSP). 'SHS1' : ('SHSP', 'v'), # Shadow stack push/pop, 1 word. 'SHS2' : ('SHSP', 'v2'), # Shadow stack push/pop, 2 words. 'SHS3' : ('SHSP', 'v3'), # Shadow stack push/pop, 3 words. 'SHS4' : ('SHSP', 'v4'), # Shadow stack push/pop, 4 words. # User Interrupt Flag. 'UIF' : ('UIF', 'b'), # User Interrupt Flag, stored with size of 1 byte, although it is 1 bit. } # If an operand type is not present here, than that operand is implicit & it's not encoded inside the instruction. operand_encoding = { 'A' : 'D', # Immediate, encoded directly in the instruction bytes. 'B' : 'V', # VEX/EVEX.vvvv encoded general purpose register. 'C' : 'R', # Modrm.reg encoded control register. 'D' : 'R', # Modrm.reg encoded debug register. 'E' : 'M', # Modrm.rm encoded general purpose register or memory. 'G' : 'R', # Modrm.reg encoded general purpose register. 'H' : 'V', # VEX/EVEX.vvvv encoded vector register. 'I' : 'I', # Immediate, encoded directly in the instruction bytes. 'J' : 'D', # Relative offset, encoded directly in the instruction bytes. 'L' : 'L', # Register encoded in an immediate. 'M' : 'M', # Modrm.rm encoded memory. 'N' : 'M', # Modrm.rm encoded MMX register. 'O' : 'D', # Absolute memory encoded directly in the instruction. 'P' : 'R', # Modrm.reg encoded MMX register. 'Q' : 'M', # Modrm.rm encoded MMX register or memory. 'R' : 'M', # Modrm.rm encoded general purpose register. 'S' : 'R', # Modrm.reg encoded segment register. 'T' : 'R', # Modrm.reg encoded test register. 'U' : 'M', # Modrm.rm encoded vector register. 'V' : 'R', # Modrm.reg encoded vector register. 'W' : 'M', # Modrm.rm encoded vector register or memory. 'Z' : 'O', # General purpose register encoded in opcode low 3 bit. 'rB' : 'R', # Modrm.reg encoded bound register. 'mB' : 'M', # Modrm.rm encoded bound register or memory. 'rK' : 'R', # Modrm.reg encoded mask register. 'vK' : 'V', # VEX/EVEX.vvvv encoded mask register. 'mK' : 'M', # Modrm.rm encoded mask register or memory. 'aK' : 'A', # EVEX.aaa encoded mask register. 'mR' : 'R', # Modrm.reg encoded memory. 'mM' : 'M', # Modrm.rm encoded memory (always). '1' : '1', # Constant 1. 'CL' : 'C', # CL register. 'ST(i)' : 'M', # Modrm.rm encoded FPU register. } valid_prefixes = [ 'REP', # Rep prefix is accepted. 'REPC', # Conditional rep prefix is accepted. 'HLE', # Hardware Lock Elision accepted. 'BND', # Bound prefix accepted (MPX). 'LOCK', # Lock prefix accepted. 'BH', # Branch hints accepted. 'XACQUIRE', # Xacquire prefix accepted. 'XRELEASE', # Xrelease prefix accepted. 'HLEWOL', # HLE prefix is accepted without lock - used by MOV instructions. 'DNT', # Do Not Track prefix accepted (CET). ] valid_access = [ 'N', # No access. 'P', # Prefetch access. 'R', # Read. 'W', # Write. 'CR', # Conditional read. 'CW', # Conditional write. 'RW', # Read-Write. 'CRW', # Conditional Read-Write. 'RCW', # Read-Conditional Write. 'CRCW', # Conditional Read-Conditional Write. ] valid_flags = [ 'CF', # Carry. 'PF', # Parity. 'AF', # Auxiliary. 'ZF', # Zero. 'SF', # Sign. 'TF', # Trap. 'IF', # Interrupt. 'DF', # Direction. 'OF', # Overflow. 'IOPL', # I/O privilege level. 'NT', # Nested Task. 'RF', # Resume Flag. 'VM', # V8086 mmode. 'AC', # Alignment Check. 'VIF', # Virtual IF. 'VIP', # Virtual IP. 'ID' # CPUID ID flag. ] valid_flag_op = [ 'm', # modified. 't', # tested. '0', # cleared. '1', # set. 'u', # undefined. 'n', # not accessed. ] valid_cpu_modes = [ 'r0', # Ring 0. 'r1', # Ring 1. 'r2', # Ring 2. 'r3', # Ring 3. 'real', # Real mode. 'v8086', # V8086 mode. 'prot', # Protected mode. 'compat', # Compatibility mode. 'long', # Long mode. 'smm', # System Management Mode. 'smm_off', # Outside SMM. 'sgx', # Software Guard Extensions SGX enclave. 'sgx_off', # Outside SGX. 'tsx', # Transactional Synchronization Extensions. 'tsx_off', # Outside TSX. 'vmxr', # VMX root. 'vmxn', # VMX non-root. 'vmxr_seam', # VMX root SEAM. 'vmxn_seam', # VMX non-root SEAM. 'vmx_off', # Outside VMX operation. ] valid_mode_groups = [ "ring", "mode", "vmx", "other", ] valid_ring_modes = [ "r0", "r1", "r2", "r3", ] valid_mode_modes = [ "real", "v8086", "prot", "compat", "long", ] valid_vmx_modes = [ "vmxr", "vmxn", "vmxr_seam", "vmxn_seam", "vmx_off", ] valid_other_modes = [ "smm", "smm_off", "sgx", "sgx_off", "tsx", "tsx_off", ] valid_mode_map = { "ring" : valid_ring_modes, "mode" : valid_mode_modes, "vmx" : valid_vmx_modes, "other" : valid_other_modes, } valid_decorators = [ '{K}', # Masking support. '{z}', # Zeroing support. '{sae}', # Surpress All Exceptions. '{er}', # Embedded Rounding. '|B32', # Broadcast 32. '|B64', # Broadcast 64. ] valid_tuples = [ 'fv', # Full Vector, Load+Op (Full Vector Dword/Qword). 'hv', # Half Vector, Load+Op (Half Vector). 'fvm', # Full Vector Memory, Load/store or subDword full vector. 'hvm', # Half Vector Memory, SubQword Conversion. 'qvm', # Quarter Vector Memory, SubDword Conversion. 'ovm', # Oct Vector Memory, SubWord Conversion. 'dup', # Dup, VMOVDDUP. 'm128', # Mem 128, Shift count from memory. 't1s8', # Tuple 1 Scalar, 8 bit, 1Tuple less than Full Vector. 't1s16', # Tuple 1 Scalar, 16 bit, 1Tuple less than Full Vector. 't1s', # Tuple 1 Scalar, 32/64 bit, 1Tuple less than Full Vector. 't1f', # Tuple 1 Fixed, 1 Tuple memsize not affected by EVEX.W. 't2', # Tuple 2, Broadcast (2 elements). 't4', # Tuple 4, Broadcast (4 elements). 't8', # Tuple 8, Broadcast (8 elements). 't1_4x', ] class InvalidEncodingException(Exception): def __init__(self, value): self.value = value def __str__(self): return repr(self.value) class ParseLineException(Exception): def __init__(self, value): self.value = value def __str__(self): return repr(self.value) def reverse_dict(d): r = {} for k in d: r[d[k]] = k return r def my_str(x): if x is None: return x else: return str(x) # # CPUID feature flags. # class CpuidFeatureFlag(): def __init__(self, finfo): self.Name = finfo["name"] self.Leaf = finfo["leaf"] self.SubLeaf = finfo["subleaf"] self.Reg = finfo["reg"] self.Bit = finfo["bit"] def __str__(self): return "%s: %s, %s, %s, %s" % (self.Name, self.Leaf, self.SubLeaf, self.Reg, self.Bit) # # Operand description # class Operand(): def __init__(self, op, access, flags, imp = False): self.Raw = op self.Type = 0 self.Size = 0 self.Flags = flags self.Decorators = [] self.Access = [] self.Block = 0 self.Encoding = 'S' self.Implicit = imp orig = op # Handle block registers. if op.endswith('+3'): self.Block = 4 op = op.replace('+3', '') elif op.endswith('+1'): self.Block = 2 op = op.replace('+1', '') else: m = re.match(r'XMM(\d)-(\d)', op) if m: start = m.group(1) end = m.group(2) self.Block = int(end) - int(start) + 1 op = 'XMM' + start # Handle the decorators. for dec in valid_decorators: if -1 != op.find(dec): # Found decorator. self.Decorators.append(dec) # Remove it from the opstring. op = op.replace(dec, "") # Handle hard-coded operators - those that are implicit/are not encoded anywhere. if op in valid_impops: self.Type, self.Size = valid_impops[op][0], valid_impops[op][1] # Now handle explicit operators. else: # Attempt a match inside the explicit operands map. for opt in valid_optype: if op.startswith(opt): self.Type = opt op = op.replace(opt, "") break # Now the operand size. After parsing the decorator and the operand type, we should be left with # the operand size only. if self.Type in ['rK', 'mK', 'vK', 'aK'] and not op in valid_opsize: self.Size = 'q' elif op in valid_opsize: self.Size = op else: raise InvalidEncodingException('Invalid operand size specified: ' + orig) if self.Type in operand_encoding: self.Encoding = operand_encoding[self.Type] elif self.Raw in operand_encoding: self.Encoding = operand_encoding[self.Raw] if imp and 'OPDEF' not in self.Flags: self.Flags.append('OPDEF') self.Access = access def __str__(self): if True: return self.Raw # # Prefixes. # class Prefix(): def __init__(self, prefix): self.Mnemonic = prefix["mnemonic"] self.Encoding = prefix["encoding"] def __str__(self): return self.Mnemonic # # Instructions. # class Instruction(): def __init__(self, iinfo): # Fill in raw instruction information self.Mnemonic = iinfo["mnemonic"] self.RawEnc = iinfo["encoding"] self.Flags = iinfo["flags"] self.Prefmap = iinfo["prefixes"] self.Set = iinfo["set"] self.Category = iinfo["cat"] self.Class = iinfo["class"] self.Rwm = iinfo["rwm"] self.Id = iinfo["cff"] or self.Set self.Tuple = iinfo["tuple"] self.ExClass = iinfo["exclass"] self.RevFlagsAccess = iinfo["flgaccess"] self.Modes = iinfo["modes"] self.FpuFlags = iinfo["fpuflg"] # First redirecton class: opcodes self.Opcodes = [] self.Prefixes = [] self.DecoFlags = [] # Second redirection class: Modrm self.HasModrm = self.ModrmRedirAfterMpref = False self.Mod = self.Reg = self.Rm = None # Third redirection class: mandatory prefix. self.Np = self.MustHave66 = self.MustHaveF2 = self.MustHaveF3 = False # Fourth redirection class: operating mode self.RedM16 = self.RedM32 = self.RedM64 = False # Fifth redirection class: default operand size self.RedDs16 = self.RedDs32 = self.RedDs64 = self.RedDDs64 = self.RedFDs64 = False # Sixth redirection class: default address size self.RedAs16 = self.RedAs32 = self.RedAs64 = False # Seventh redirecton class: rex, rex.w, rep, repz self.RedRexB = self.RedRexW = self.RedRep = self.Red64 = self.RedF3 = False # Misc - vendor self.Vendor = None # Misc - feature. self.Feature = None # XOP, VEX and EVEX classes. self.Vex = self.Xop = self.Evex = self.Mvex = False self.M = self.P = self.L = self.W = None # Now parse each info chunk and extract the actual data for t in iinfo["encoding"].split(' '): if '0x66' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex): self.Prefixes.append(0x66) self.MustHave66 = True elif '0xF3' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex): self.Prefixes.append(0xF3) self.MustHaveF3 = True elif '0xF2' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex): self.Prefixes.append(0xF2) self.MustHaveF2 = True elif 'NP' == t: self.Np = True elif 'a0xF3' == t: self.Prefixes.append(0xF3) self.RedF3 = True elif 'o64' == t: self.Red64 = True elif 'rexw' == t: self.RedRexW = True elif 'rexb' == t: self.RedRexB = True elif 'rep' == t: self.RedRep = True elif 'ds16' == t: self.RedDs16 = True elif 'ds32' == t: self.RedDs32 = True elif 'ds64' == t: self.RedDs64 = True elif 'dds64' == t: self.RedDDs64 = True elif 'fds64' == t: self.RedFDs64 = True elif 'as16' == t: self.RedAs16 = True elif 'as32' == t: self.RedAs32 = True elif 'as64' == t: self.RedAs64 = True elif t.startswith('/'): self.HasModrm = True self.Flags.append('MODRM') if t.endswith(':mem'): self.Mod = 'mem' if t.endswith('reg'): self.Mod = 'reg' t = t.replace(':mem', '').replace(':reg', '') for i in range(0, 8): if '/%d' % i == t: self.Reg = i if re.match(r'0x[0-9a-fA-F]{2}', t[1:]): mrm = int(t[1:], 16) if 0xC0 == (mrm & 0xC0): self.Mod = 'reg' else: self.Mod = 'mem' self.Rm = mrm & 7 self.Reg = (mrm >> 3) & 7 elif 'modrm' == t: self.HasModrm = True self.Flags.append('MODRM') elif t.startswith('mod:'): self.Mod = t[4:] if self.Mod not in ['mem', 'reg']: raise InvalidEncodingException('Invalid encoding: illegal "mod" modifier') elif t.startswith('reg:'): self.Reg = t[4:] if self.Reg not in ['0', '1', '2', '3', '4', '5', '6', '7']: raise InvalidEncodingException('Invalid encoding: illegal "reg" value') self.Reg = int(self.Reg) elif t.startswith('rm:'): self.Rm = t[3:] if self.Rm not in ['0', '1', '2', '3', '4', '5', '6', '7']: raise InvalidEncodingException('Invalid encoding: illegal "rm" value') self.Rm = int(self.Rm) elif t.startswith('modrmpmp'): self.ModrmRedirAfterMpref = True elif t == 'xop': self.Xop = True elif t == 'vex': self.Vex = True elif t == 'evex': self.Evex = True elif t == 'mvex': self.Mvex = True elif t.startswith('m:'): self.M = t[2:] if self.M not in ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C']: raise InvalidEncodingException('Invalid encoding: illegal "mmmmm" value') self.M = int(self.M, 16) elif t.startswith('p:'): self.P = t[2:] if not self.P in ['0', '1', '2', '3']: raise InvalidEncodingException('Invalid encoding: illegal "pp" value!') self.P = int(self.P) elif t.startswith('l:'): self.L = t[2:] if self.L == '128': self.L = 0 elif self.L == '256': self.L = 1 elif self.L == '512': self.L = 2 elif self.L == 'x': self.L = None elif self.L == 'i': self.L = None if 'LIG' not in self.Flags: self.Flags.append('LIG') elif self.L in ['0', '1', '2', '3']: self.L = int(self.L) else: raise InvalidEncodingException('Invalid encoding: illegal "l" value!') elif t.startswith('w:'): self.W = self.RawW = t[2:] if self.W == 'x': self.W = None elif self.W == 'i': self.W = None if 'WIG' not in self.Flags: self.Flags.append('WIG') elif self.W in ['0', '1']: self.W = int(self.W) else: raise InvalidEncodingException('Invalid encoding: illegal "w" value!') elif re.match(r'0x[0-9a-fA-F]{2}', t): self.Opcodes.append(int(t, 16)) elif t in ['intel', 'amd', 'via', 'cyrix']: self.Vendor = t elif t in ['mpx', 'cet', 'cldm']: self.Feature = t elif 'vsib' == t: self.HasVsib = True if 'VSIB' not in self.Flags: self.Flags.append('VSIB') elif 'mib' == t: self.HasMib = True if 'MIB' not in self.Flags: self.Flags.append('MIB') elif 'bitbase' == t: self.HasBitbase = True if 'BITBASE' not in self.Flags: self.Flags.append('BITBASE') elif 'sibmem' == t: self.HasSibMem = True if 'SIBMEM' not in self.Flags: self.Flags.append('SIBMEM') elif t in ['ib', 'iw', 'iz', 'iv', 'id', 'cb', 'cz', 'cv', 'cp', 'is4']: # Not used for now, but they must be specified, for a complete instruction encoding specification. pass elif t.startswith('evex.'): tokens2 = t.split('.') self.Evex = True self.M = self.P = self.L = self.W = 0 for t2 in tokens2[1:]: # Handle the L specifier if t2 == 'LIG': self.L = None if 'LIG' not in self.Flags: self.Flags.append('LIG') elif t2 == 'LANY': self.L = None elif t2 == '128' or t2 == 'LZ' or t2 == 'L0': self.L = 0 elif t2 == '256' or t2 == 'L1': self.L = 1 elif t2 == '512' or t2 == 'L2': self.L = 2 # Handle the W specifier elif t2 == 'WIG': self.W = None if 'WIG' not in self.Flags: self.Flags.append('WIG') elif t2 == 'WANY': self.W = None elif t2 == 'W0': self.W = 0 elif t2 == 'W1': self.W = 1 # Handle compressed prefix elif t2 == '66': self.P = 1 elif t2 == 'F3': self.P = 2 elif t2 == 'F2': self.P = 3 # Handle opcode map elif t2 == '0F': self.M = 1 elif t2 == '0F38': self.M = 2 elif t2 == '0F3A': self.M = 3 elif t2 in ['NDS', 'NDD', 'DDS']: pass else: raise InvalidEncodingException('Unknwon new evex token: %s/%s' % (t, t2)) else: raise InvalidEncodingException('Unknown token: %s' % t) # Pre-process the explicit operands. The mask register is contained as a decorator, but put it as a direct # operand as well. The access flag is already present in rwm. if len(iinfo["expops"]) >= 1 and iinfo["expops"][0].find("{K") > 0: iinfo["expops"].insert(1, 'aKq') # Parse the explicit instruction operands. self.ExpOps = self.process_operands(iinfo["expops"], False) # Parse the implicit instruction operands. self.ImpOps = self.process_operands(iinfo["impops"], True) # Post-process the operands. We fill up the flags with additional info based on the operands. for op in self.ExpOps: for deco in op.Decorators: self.DecoFlags.append({'{K}':'MASK', '{z}':'ZERO', '{sae}':'SAE', '{er}':'ER', '|B32':'BROADCAST', '|B64':'BROADCAST'}[deco]) if op.Type in ['U', 'V', 'W', 'H', 'L'] and 'VECT' not in self.Flags: self.Flags.append('VECT') # VEX, XOP, EVEX and MVEX instructions are not valid in real or v8086 modes. if self.Vex or self.Xop or self.Evex or self.Mvex: if 'real' in self.Modes: self.Modes.remove('real') if 'v8086' in self.Modes: self.Modes.remove('v8086') if 'long' not in self.Modes and 'II64' not in self.Flags: self.Flags.append('II64') if 'long' in self.Modes and 'prot' not in self.Modes and 'O64' not in self.Flags: self.Flags.append('O64') # Split the instruction into encoding entities. e = self.split_encoding() if self.Vex or self.Xop or self.Evex: self.Spec = { "mmmmm" : e[0], "opcodes" : e[1], "modrm" : e[2], "pp" : e[3], "l" : e[4], "w" : e[5] } else: self.Spec = { "opcodes" : e[0], "modrm" : e[1], "mpre" : e[2], "mode" : e[3], "dsize" : e[4], \ "asize" : e[5], "opre" : e[6], "vendor" : e[7], "feature": e[8] } def process_operands(self, ops, imp = False): p = 1 res = [] for op in ops: if op == "nil": break flags = [] if not imp: for f in self.Flags: if f.startswith('OP%d' % p): flags.append('OP' + f[3:]) self.Flags.remove(f) else: flags.append('OPDEF') if not imp: res.append(Operand(op, self.Rwm[p - 1], flags, imp)) else: res.append(Operand(op, self.Rwm[len(self.ExpOps) + p - 1], flags, imp)) p += 1 return res def split_encoding(self): if self.Vex or self.Xop or self.Evex or self.Mvex: return self.split_encoding_vex() else: return self.split_encoding_legacy() def split_encoding_vex(self): # First, get the 'mmmmm' - VEX decoding table. mmmmm = '%x' % self.M # Now get the opcode. Should be only one. opcodes = ['%02x' % x for x in self.Opcodes] # Get the modrm redirections. modrm = { "mod": self.Mod, "reg": my_str(self.Reg), "rm": my_str(self.Rm), "modpost": None } # Get the pp, if any. pp = my_str(self.P) # Get the l, if any. l = my_str(self.L) # Get the w, if any. w = my_str(self.W) return (mmmmm, opcodes, modrm, pp, l, w) def split_encoding_legacy(self): # First redirection class, the opcode. opcodes = ['%02x' % x for x in self.Opcodes] # Second redirection class, modrm modrm = { "mod": self.Mod, "reg": my_str(self.Reg), "rm": my_str(self.Rm), "modpost": None } # Third redirection class, mandatory prefixes mprefixes = [] if self.MustHaveF2: mprefixes.append('F2') if self.MustHaveF3: mprefixes.append('F3') if self.MustHave66: mprefixes.append('66') if self.Np: mprefixes.append('NP') if len(mprefixes) == 0 and (not (self.Xop or self.Vex or self.Evex or self.Mvex)) and\ (self.Opcodes[0] == 0x0F and self.Opcodes[1] in [0x3A, 0x38]): mprefixes.append(None) # Fourth redirection class, operating mode. mode = [] if self.RedM16: mode.append('m16') elif self.RedM32: mode.append('m32') elif self.RedM64: mode.append('m64') # Fifth redirection class, default operand size. dsize = [] if self.RedDs16: dsize.append('ds16') elif self.RedDs32: dsize.append('ds32') elif self.RedDs64: dsize.append('ds64') elif self.RedDDs64: dsize.append('dds64') elif self.RedFDs64: dsize.append('fds64') # Sixth redirection class, default address size. asize = [] if self.RedAs16: asize.append('as16') elif self.RedAs32: asize.append('as32') elif self.RedAs64: asize.append('as64') # Seventh redirection class, REX prefix, REX.W, 64 bit mode, 0xF3, SIB. The important aspect here is that unlike # the other classes, this is not exhaustive - if an instruction does not fit in any of the entries, it # will default to index 0 (and it will not return invalid encoding, unless entry 0 is invalid). oprefixes = [] if self.RedRexB: oprefixes.append('rexb') if self.RedRexW: oprefixes.append('rexw') if self.Red64: oprefixes.append('64') if self.RedF3: oprefixes.append('aF3') if self.RedRep: oprefixes.append('rep') # Vendor redirection, if any. return (opcodes, modrm, mprefixes, mode, dsize, asize, oprefixes, self.Vendor, self.Feature) def __str__(self): # Get the operands ops = '' for o in self.ExpOps: ops += o.__str__() + ',' ops = ops[:-1] # Return a text reprezentation of the encoding return (self.Mnemonic + ' ' + ops).strip() def parse_entry(entry, template_flags = {}, template_cpuid = {}, template_modes = {}): # make sure this is not a comment. Skip comments. if entry.startswith('#') or len(entry) < 4: return None try: # Preprocess: remove comments, CR/LF com = entry.find('#') x = entry.replace('\x0D', '').replace('\x0A', '') if -1 != com: x = entry[:com] # Space can't be the first character. if x[0] == ' ': raise ParseLineException('Space cannot be the first character!') # Extract the mnemonic mnemonic = x[0:x.find(' ')].strip() # Extract the explicit operands x = x[x.find(' '):].strip() expops = x[:x.find(' ')].split(',') if len(expops) == 1 and expops[0] == 'nil': expops = [] # Extract the implicit operands x = x[x.find(' '):].strip() impops = x[:x.find(' ')].split(',') if len(impops) == 1 and impops[0] == 'nil': impops = [] # Extract the encoding x = x[x.find('[')+1:] encoding = x[:x.find(']')].strip() # Extract the flags, class, set, category, encoding, prefmap attributes = prefmap = isaset = category = iclass = adop = rwm = None cff = tuple = flgaccess = modes = exclass = fpuflg = None x = x[x.find(']')+1:].strip() while x: start = x.find(':') end = x.find(',') if start == -1: break if end == -1: end = len(x) token = x[:start].strip() value = x[start+1:end].strip() # parse token if token == 'a': # Instruction attributes. attributes = value.split('|') elif token == 'p': # Accepted prefixes. prefmap = value.split('|') elif token == 's': # Instruction set isaset = value elif token == 't': # Instruction type category = value elif token == 'c': # Instruction class. Defaults to the mnemonic if not specified. iclass = value elif token == 'w': # Read/write map rwm = value.split('|') elif token == 'i': # CPUID. cff = value elif token == 'l': # tuple tuple = value elif token == 'e': exclass = value elif token == 'f': # Flags access flgaccess = [] for v in value.split('|'): if v in template_flags: flgaccess += template_flags[v].split('|') else: flgaccess.append(v) elif token == 'u': fpuflg = ['u', 'u', 'u', 'u'] # each one is undefined. for v in value.split('|'): flg, acc = v.split('=') if flg not in ['C0', 'C1', 'C2', 'C3']: raise ParseLineException('Unknown FPU flag: %s' % flg) if acc not in ['0', '1', 'm', 'u']: raise ParseLineException('Unknown FPU flag access: %s' % acc) fpuflg[int(flg[1])] = acc elif token == 'm': # CPU modes. # Example: m:ring=0,1,2,3|vmx=root,nonroot|mode=real,v8086,smm,prot,compat,long|other=sgx,tsx # Note: any group that is not specified is considered entirely valid # Note: any group that is specified overrides all the other fields in the group; example: # mode=real - this means the instruction is valid ONLY in real mode. # mode=!v8086 - this means the instructiom is valid is ANY mode except for V8086 tmodes = [] for t in value.split('|'): if t in template_modes: tmodes += template_modes[t].split('|') else: tmodes.append(t) modes = [] groups = {} for g in valid_mode_groups: groups[g] = {} groups[g]["negated"] = False groups[g]["specified"] = False groups[g]["modes"] = [] for tm in tmodes: m, v = tm.split('=') for vx in v.split('+'): negated = False if vx.startswith('!'): vx = vx[1:] groups[m]["negated"] = True if m not in valid_mode_groups: raise ParseLineException('Unknown CPU mode group specified: %s' % m) if vx not in valid_mode_map[m]: raise ParseLineException('Mode %s is not valid for mode group %s; it can be one of [%s]' % (vx, m, ','.join(valid_mode_map[m]))) groups[m]["specified"] = True groups[m]["modes"].append(vx) for g in groups: if not groups[g]["specified"]: modes += valid_mode_map[g] elif not groups[g]["negated"]: modes += groups[g]["modes"] else: modes += [x for x in valid_mode_map[g] if x not in groups[g]["modes"]] else: raise ParseLineException('Unknown token specified: %s' % token) # Advance if -1 == x.find(','): x = '' else: x = x[x.find(',')+1:].strip() if attributes is None: attributes = [] if prefmap is None: prefmap = [] if isaset is None: isaset = 'UNKNOWN' if category is None: category = 'UNKNOWN' if iclass is None: iclass = mnemonic if rwm is None: rwm = [] if cff is None: cff = None if modes is None: # No mode specified, assume validity in all modes. modes = [] modes += valid_cpu_modes if flgaccess is None: flgaccess = [] if fpuflg is None: # fpuflg[x] is for Cx (fpuflg[0] = C0, fpuflg[1] = C1, etc.) # u = undefined, m = modified, 0 = cleared to 0, 1 = set to 1. fpuflg = ['u', 'u', 'u', 'u'] # Validate the tokens. # The set can be anything. # The type can be anything. # The iclass can be missing, it will default to the mnemonic. # The read/write map must have the same size as the number of operands. if len(rwm) < len(expops) + len(impops): raise ParseLineException('Invalid number of operand access specifiers: provided %d, expecting at least %d' % (len(rwm), len(expops) + len(impops))) for r in rwm: if r not in valid_access: raise ParseLineException('Unknown access specifier "%s", expecting one of [%s]' % (r, ','.join(valid_access))) # The CPUID can be anything, even if it doesn't match something specified in cpuid.dat. # The modes must be one of the valid modes. for m in modes: if m.startswith('!'): m = m[1:] if m not in valid_cpu_modes: raise ParseLineException('Unknown CPU mode specifier "%s", expecting one of [%s]' % (m, ','.join(valid_cpu_modes))) # Validate the prefixes. for p in prefmap: if p not in valid_prefixes: raise ParseLineException('Unknown prefix specifier "%s", expecting one of [%s]' % (p, ','.join(valid_prefixes))) # Validate the tuples. if tuple and tuple not in valid_tuples: raise ParseLineException('Unknown tuple specifier "%s", expecting one of [%s]' % (tuple, ','.join(valid_tuples))) # Validate the attributes. for a in attributes: if a not in valid_attributes: raise ParseLineException('Unknown attribute specifier "%s", expecting one of [%s]' % (a, ','.join(valid_attributes))) # Validate the flags. revflg = {} for m in valid_flag_op: revflg[m] = [] for flg in flgaccess: f, m = flg.split('=') if m not in valid_flag_op: raise ParseLineException('Unknow flag access specifier "%s", expecting one of [%s]' % (m, ','.join(valid_flag_op))) if f not in valid_flags: raise ParseLineException('Unknow flag specifier "%s", expecting one of [%s]' % (f, ','.join(valid_flas))) revflg[m].append(f) flgaccess = revflg iinfo = { "mnemonic" : mnemonic, # Mnemonic "expops" : expops, # Explicit operands "impops" : impops, # Implicit operands "encoding" : encoding, # Encoding "flags" : attributes, # Instruction attributes "prefixes" : prefmap, # Accepted prefixes "set" : isaset, # Instruction set "cat" : category, # Instruction category "class" : iclass, # Instruction class "rwm" : rwm, # Read/write operands map "cff" : cff, # CPUID feature flag "tuple" : tuple, # Tuple type, for EVEX instruxtions "exclass" : exclass, # Exception class, for SSE/VEX/EVEX instructions "flgaccess" : flgaccess, # RFLAGS access "modes" : modes, # Valid operating modes "fpuflg" : fpuflg, # FPU flags access (C0, C1, C2, C3), valid for x87 instructions only } if 'PREFIX' in attributes: return None try: ins = Instruction(iinfo) except: raise except Exception as e: raise return ins def parse_ins_file(fpath, template_flags = {}, template_cpuid = {}, template_modes = {}): instructions = [] lcount = 0 for line in open(fpath, 'rt'): lcount += 1 try: ins = parse_entry(line, template_flags, template_cpuid, template_modes) if ins: instructions.append(ins) except Exception as e: print('ERROR: Parsing failed at %s:%d: %s' % (fpath, lcount, e)) raise return instructions def parse_pre_file(fpath): prefixes = [] for line in open(fpath, 'rt'): # Ignore comments. if line.startswith('#'): continue res = re.findall(r'([^\s]+)\s*\[\s*(0x[0-9a-fA-F]+)\]', line) if not res: continue res = res[0] pref = {} pref["mnemonic"] = res[0] pref["encoding"] = res[1] prefixes.append(Prefix(pref)) return prefixes def parse_cff_file(fpath): features = [] for line in open(fpath, 'rt'): if line.startswith('#'): continue res = re.findall(r'([^\s]+)\s+:\s+(0x[0-9a-fA-F]+),\s+(0x[0-9a-fA-F]+),\s+(EAX|ECX|EDX|EBX),\s+(\d+)', line) if not res: continue res = res[0] cffi = {} cffi["name"] = res[0] cffi["leaf"] = res[1] cffi["subleaf"] = res[2] cffi["reg"] = res[3] cffi["bit"] = res[4] features.append(CpuidFeatureFlag(cffi)) return features def parse_flags_file(fpath): flags = {} for line in open(fpath, 'rt'): if line.startswith('#'): continue res = re.findall(r'([^\s]+)\s+:([^$]+)', line) if not res: continue res = res[0] flags[res[0]] = res[1].strip('\n\r ') return flags def parse_modess_file(fpath): modes = {} for line in open(fpath, 'rt'): if line.startswith('#'): continue res = re.findall(r'([^\s]+)\s+:([^$]+)', line) if not res: continue res = res[0] modes[res[0]] = res[1].strip('\n\r ') return modes # # ============================================================================= # Main # ============================================================================= # if __name__ == "__main__": if len(sys.argv) < 2: print('Usage: %s defs-file' % os.path.basename(sys.argv[0])) sys.exit(-1) # Parse the flags file. flags = parse_flags_file('%s/flags.dat' % sys.argv[1]) # Parse the prefixes prefixes = parse_pre_file('%s/prefixes.dat' % sys.argv[1]) # Parse the cpuid feature flags and extract each feature features = parse_cff_file('%s/cpuid.dat' % sys.argv[1]) # Parse the modes file. modes = parse_modess_file('%s/modes.dat' % sys.argv[1]) # Parse the instruction file and extract the instructions instructions = [] for fn in glob.glob('%s/table*.dat' % sys.argv[1]): instructions += parse_ins_file(fn, flags, features) # Sort the instructions. instructions = sorted(instructions, key = lambda x: x.Mnemonic) for i in range(0, len(instructions)): print(instructions[i]) for i in range(0, len(prefixes)): print(prefixes[i]) features = sorted(features, key = lambda x: x.Name) for i in range(0, len(features)): print(features[i])