arno/YubiKey-Guide
1
0
Fork 0
mirror of https://github.com/drduh/YubiKey-Guide.git synced 2024-11-21 23:08:08 +00:00
Code Issues Releases Wiki Activity
509 Commits 1 Branch 0 Tags 1.3 MiB
HTML 96.3%
Nix 3.5%
Shell 0.2%
7a1039ab08
Go to file
drduh 7a1039ab08 Replace mkdir commands
2024-03-17 17:28:53 -07:00
.github Create FUNDING.yml 2020-08-30 21:06:04 +00:00
media added img 2018-12-03 14:29:51 +01:00
flake.lock NixOS Live Image: convert to a flake 2024-02-04 14:03:54 +02:00
flake.nix Simplify instructions, reduce manual labor 2024-03-16 19:35:04 -07:00
LICENSE Update filenames to fix #222 2021-08-15 15:42:53 -07:00
passphrase.html Simplify instructions, reduce manual labor 2024-03-16 19:35:04 -07:00
README.md Replace mkdir commands 2024-03-17 17:28:53 -07:00
reset-yubikey Move keyserver instructions to later, more batch commands 2024-03-17 09:43:11 -07:00
switch-to-backup-yubikey Script to switch between two Yubikeys with identical keys 2021-05-05 00:42:48 +01:00

README.md

This is a guide to using YubiKey as a smart card for secure encryption, signature and authentication operations.

Keys stored on YubiKey are non-exportable, unlike filesystem-based credentials, while remaining convenient for daily use. YubiKey can be configured to require a physical touch for cryptographic operations, reducing the risk of credential compromise.

To suggest an improvement, send a pull request or open an issue.

Purchase YubiKey

Current YubiKeys except the FIDO-only Security Key Series and Bio Series YubiKeys are compatible with this guide.

Verify YubiKey by visiting yubico.com/genuine. Select Verify Device to begin the process. Touch the YubiKey when prompted and allow the site to see the make and model of the device when prompted. This device attestation may help mitigate supply chain attacks.

Several portable storage devices (such as microSD cards) for storing encrypted backups are also recommended.

Prepare environment

A dedicated, secure operating environment is recommended to generate cryptographic keys.

The following is a general ranking of environments least to most hospitable to generating materials:

  1. Public, shared or other computer owned by someone else
  2. Daily-use personal operating system with unrestricted network access
  3. Virtualized operating system with limited capabilities (using virt-manager, VirtualBox or VMware, for example)
  4. Dedicated and hardened Debian or OpenBSD installation
  5. Ephemeral Debian Live or Tails booted without primary storage attached
  6. Hardened hardware and firmware (Coreboot, Intel ME removed)
  7. Air-gapped system without network capabilities, preferably ARM-based Raspberry Pi or other architecturally diverse equivalent

Debian Live is used in this guide to balance usability and security, with some additional instructions for OpenBSD.

Download the latest image and signature files:

curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS"

curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS.sign"

curl -fLO "https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/$(awk '/xfce.iso$/ {print $2}' SHA512SUMS)"

Download the Debian signing public key:

gpg --keyserver hkps://keyring.debian.org --recv DF9B9C49EAA9298432589D76DA87E80D6294BE9B

If the public key cannot be received, use a different keyserver or DNS server:

gpg --keyserver hkps://keyserver.ubuntu.com:443 --recv DF9B9C49EAA9298432589D76DA87E80D6294BE9B

Verify the signature:

gpg --verify SHA512SUMS.sign SHA512SUMS

gpg: Good signature from "Debian CD signing key <debian-cd@lists.debian.org>" must appear in the output.

Verify the cryptographic hash of the image file matches the one in the signed file:

grep $(sha512sum debian-live-*-amd64-xfce.iso) SHA512SUMS

See Verifying authenticity of Debian CDs for more information.

Connect a portable storage device and identify the disk label - this guide uses /dev/sdc throughout, but this value may differ on your system:

Linux

$ sudo dmesg | tail
usb-storage 3-2:1.0: USB Mass Storage device detected
sd 2:0:0:0: [sdc] Attached SCSI removable disk

Copy the Debian image to the device:

$ sudo dd if=debian-live-*-amd64-xfce.iso of=/dev/sdc bs=4M status=progress ; sync
465+1 records in
465+1 records out
1951432704 bytes (2.0 GB, 1.8 GiB) copied, 42.8543 s, 45.5 MB/s

OpenBSD

$ dmesg | tail -n2
sd2 at scsibus4 targ 1 lun 0: <TS-RDF5, SD Transcend, TS3A> SCSI4 0/direct removable serial.0000000000000
sd2: 15193MB, 512 bytes/sector, 31116288 sectors

$ doas dd if=debian-live-*-amd64-xfce.iso of=/dev/rsd2c bs=4m
465+1 records in
465+1 records out
1951432704 bytes transferred in 139.125 secs (14026448 bytes/sec)

Power off, then disconnect internal hard drives and all unnecessary devices, such as the wireless card.

Improving entropy

Generating cryptographic keys requires high-quality randomness, measured as entropy.

Most operating systems use software-based pseudorandom number generators or CPU-based hardware random number generators (HRNG).

Optionally, a device such as OneRNG may be used to increase the speed and possibly the quality of available entropy.

Configure rng-tools:

sudo apt -y install at rng-tools python3-gnupg openssl

wget https://github.com/OneRNG/onerng.github.io/raw/master/sw/onerng_3.7-1_all.deb

Verify the package:

sha256sum onerng_3.7-1_all.deb

The value must match:

b7cda2fe07dce219a95dfeabeb5ee0f662f64ba1474f6b9dddacc3e8734d8f57

Install the package:

sudo dpkg -i onerng_3.7-1_all.deb

echo "HRNGDEVICE=/dev/ttyACM0" | sudo tee /etc/default/rng-tools

Insert the device and restart rng-tools:

sudo atd

sudo service rng-tools restart

Install software

Load the operating system and configure networking.

Note If the screen locks on Debian Live, unlock with user / live

Open terminal and install required software packages.

Debian/Ubuntu

sudo apt update

sudo apt -y upgrade

sudo apt -y install \
    wget gnupg2 gnupg-agent dirmngr \
    cryptsetup scdaemon pcscd \
    yubikey-personalization yubikey-manager

Note Live Ubuntu images may require modification to /etc/apt/sources.list and may need additional packages:

sudo apt -y install libssl-dev swig libpcsclite-dev

OpenBSD

doas pkg_add gnupg pcsc-tools

macOS

Download and install Homebrew and the following packages:

brew install \
  gnupg yubikey-personalization ykman pinentry-mac wget

Note An additional Python package dependency may need to be installed to use ykman - pip install yubikey-manager

NixOS

Build an air-gapped NixOS LiveCD image:

ref=$(git ls-remote https://github.com/drduh/Yubikey-Guide refs/heads/master | awk '{print $1}')

nix build --experimental-features "nix-command flakes" \
  github:drduh/YubiKey-Guide/$ref#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage

If you have this repository checked out:

Recommended, but optional: update nixpkgs and drduh/config:

nix flake update --commit-lock-file

Build the image:

nix build --experimental-features "nix-command flakes" .#nixosConfigurations.yubikeyLive.x86_64-linux.config.system.build.isoImage

Copy it to a USB drive:

sudo cp -v result/iso/yubikeyLive.iso /dev/sdc ; sync

Skip steps to create a temporary working directory and a hardened configuration, as they are already part of the image.

Arch

sudo pacman -Syu gnupg pcsclite ccid yubikey-personalization

RHEL7

sudo yum install -y gnupg2 pinentry-curses pcsc-lite pcsc-lite-libs gnupg2-smime

Fedora

sudo dnf install wget

wget https://github.com/rpmsphere/noarch/raw/master/r/rpmsphere-release-38-1.noarch.rpm

sudo rpm -Uvh rpmsphere-release*rpm

sudo dnf install \
    gnupg2 dirmngr cryptsetup gnupg2-smime \
    pcsc-tools opensc pcsc-lite secure-delete \
    pgp-tools yubikey-personalization-gui

Prepare GnuPG

Create a temporary directory which will be cleared on reboot and set it as the GnuPG directory:

GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX)

Configuration

Import or create a hardened configuration:

cd $GNUPGHOME

wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf

The options will look similar to:

$ grep -ve "^#" $GNUPGHOME/gpg.conf
personal-cipher-preferences AES256 AES192 AES
personal-digest-preferences SHA512 SHA384 SHA256
personal-compress-preferences ZLIB BZIP2 ZIP Uncompressed
default-preference-list SHA512 SHA384 SHA256 AES256 AES192 AES ZLIB BZIP2 ZIP Uncompressed
cert-digest-algo SHA512
s2k-digest-algo SHA512
s2k-cipher-algo AES256
charset utf-8
fixed-list-mode
no-comments
no-emit-version
no-greeting
keyid-format 0xlong
list-options show-uid-validity
verify-options show-uid-validity
with-fingerprint
require-cross-certification
no-symkey-cache
use-agent
throw-keyids

Note Networking can be disabled for the remainder of the setup.

Identity

When creating an identity with GnuPG, the default options ask for a "Real name", "Email address" and optional "Comment".

Depending on how you plan to use GnuPG, set these values respectively:

IDENTITY="YubiKey User <yubikey@example>"

Or use any attribute which will uniquely identity the key:

IDENTITY="My Cool YubiKey - 2024"

Expiration

Determine the desired Subkey validity duration.

Setting a key expiry forces identity and credential lifecycle management. However, setting an expiry on the primary Certify key is pointless, because it can be used to simply extend itself (revocation certificates should be used instead).

This guide recommends a two year expiration for Subkeys to balance security and usability, however longer durations are possible to reduce maintenance frequency.

When Subkeys expire, they may still be used to decrypt with GnuPG and authenticate with SSH, however they can not be used to encrypt nor sign new messages.

Subkeys must be renewed or rotated using the Certify key - see Updating Subkeys.

Set the expiration date to two years:

EXPIRATION=2y

Or set the expiration date to a specific date to schedule maintenace:

EXPIRATION=2026-05-01

Passphrase

Generate a passphrase, which will be used to issue the Certify key and Subkeys.

The passphrase is recommended to consist of only uppercase letters and numbers for improved readability. Diceware is another method for creating strong and memorable passphrases.

The following commands will generate and display a strong passphrase which avoids ambiguous characters:

PASS=$(LC_ALL=C tr -dc 'A-Z1-9' < /dev/urandom | \
  tr -d "1IOS5U" | fold -w 30 | sed "-es/./ /"{1..26..5} | \
  cut -c2- | tr " " "-" | head -1)

echo $PASS

Memorize the passphrase or write it in a secure location, ideally separate from the portable storage device used for key material. This repository includes a passphrase.html template to help with transcription. Save the raw file, open it with a browser and print. Use a pen or permanent marker to select a letter or number on each row for each character in the passphrase.

Create Certify key

The primary key to generate is the Certify key, which will be used to issue Subkeys for encryption, signature and authentication operations.

The Certify key should be kept offline at all times and only accessed from a dedicated and secure environment to issue or revoke Subkeys.

This guide recommends 4096-bit RSA. Do not set an expiration date on the Certify key.

Generate the Certify key:

gpg --batch --passphrase "$PASS" --quick-generate-key "$IDENTITY" \
    rsa4096 cert never

Set the Certify key identifier beginning with 0x as KEYID with the following command, or by entering the value manually:

KEYID=$(gpg -K | grep -Po "(0x\w+)")

Set the key fingerprint:

KEYFPR=$(gpg --fingerprint "$KEYID" | grep -Eo '([0-9A-F][0-9A-F ]{49})' | head -n 1 | tr -d ' ')

Create Subkeys

The following command will generate Signature, Encryption and Authentication Subkeys, using the previously configured passphrase and expiration:

for key_type in sign encrypt auth ; do \
  gpg --batch --pinentry-mode=loopback \
    --passphrase "$PASS" --quick-add-key "$KEYFPR" \
    rsa4096 $key_type "$EXPIRATION"
 done

Verify keys

List available secret keys:

gpg -K

The output will display [C]ertify, [S]ignature, [E]ncryption and [A]uthentication keys:

sec   rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C]
      Key fingerprint = 4E2C 1FA3 372C BA96 A06A  C34A F0F2 CFEB 0434 1FB5
uid                   [ultimate] YubiKey User <yubikey@example>
ssb   rsa4096/0xB3CD10E502E19637 2024-01-01 [S] [expires: 2026-01-01]
ssb   rsa4096/0x30CBE8C4B085B9F7 2024-01-01 [E] [expires: 2026-01-01]
ssb   rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-01-01]

Backup keys

Save a copy of the Certify key and Subkeys:

gpg --output $GNUPGHOME/$KEYID-Certify.key \
    --batch --pinentry-mode=loopback --passphrase "$PASS" \
    --armor --export-secret-keys $KEYID

gpg --output $GNUPGHOME/$KEYID-Subkeys.key \
    --batch --pinentry-mode=loopback --passphrase "$PASS" \
    --armor --export-secret-subkeys $KEYID

gpg --output $GNUPGHOME/$KEYID.asc \
    --armor --export $KEYID

Create an encrypted backup on portable storage to be kept offline in a secure and durable location.

The following process is recommended to be repeated several times on multiple portable storage devices, as they can fail over time. As an additional backup measure, Paperkey may be used to make a physical copy of key materials for improved durability.

Tip The ext2 filesystem without encryption can be mounted on Linux and OpenBSD. Use FAT32 or NTFS filesystem for macOS and Windows compatibility instead.

Linux

Attach a portable storage device and check its label, in this case /dev/sdc:

$ sudo dmesg | tail
usb-storage 3-2:1.0: USB Mass Storage device detected
sd 2:0:0:0: [sdc] Attached SCSI removable disk

$ sudo fdisk -l /dev/sdc
Disk /dev/sdc: 14.9 GiB, 15931539456 bytes, 31116288 sectors

Warning Confirm the destination (of) before issuing the following command! This guide uses /dev/sdc throughout, but this value may differ on your system.

Zero the header to prepare for encryption:

sudo dd if=/dev/zero of=/dev/sdc bs=4M count=1

Erase and create a new partition table:

sudo fdisk /dev/sdc <<EOF
g
w
EOF

Create a small (at least 20 Mb is recommended to account for the LUKS header size) partition for storing secret materials:

sudo fdisk /dev/sdc <<EOF
n


+20M
w
EOF

Use LUKS to encrypt the new partition.

Once again, generate a unique passphrase (different from the Passphrase used for the GnuPG identity) to protect the encrypted volume:

PASS=$(LC_ALL=C tr -dc 'A-Z1-9' < /dev/urandom | \
  tr -d "1IOS5U" | fold -w 30 | sed "-es/./ /"{1..26..5} | \
  cut -c2- | tr " " "-" | head -1)

echo $PASS

Memorize or write it down, then format the partition:

echo $PASS | sudo cryptsetup -q luksFormat /dev/sdc1

Mount the partition:

echo $PASS | sudo cryptsetup -q luksOpen /dev/sdc1 gnupg-secrets

Create an ext2 filesystem:

sudo mkfs.ext2 /dev/mapper/gnupg-secrets -L gnupg-$(date +F)

Mount the filesystem and copy the temporary GnuPG working directory exported key materials:

sudo mkdir /mnt/encrypted-storage

sudo mount /dev/mapper/gnupg-secrets /mnt/encrypted-storage

sudo cp -av $GNUPGHOME /mnt/encrypted-storage/

Optional Backup the OneRNG package:

sudo cp onerng_3.7-1_all.deb /mnt/encrypted-storage/

Note To provision multiple YubiKeys, keep the backup mounted or remember to terminate the GnuPG process before saving.

Unmount and close the encrypted volume:

sudo umount /mnt/encrypted-storage

sudo cryptsetup luksClose gnupg-secrets

OpenBSD

Attach a USB disk and determine its label:

$ dmesg | grep sd.\ at
sd2 at scsibus5 targ 1 lun 0: <TS-RDF5, SD Transcend, TS37> SCSI4 0/direct removable serial.00000000000000000000

Print the existing partitions to make sure it's the right device:

doas disklabel -h sd2

Initialize the disk by creating an a partition with FS type RAID and size of 25 Megabytes:

$ doas fdisk -giy sd2
Writing MBR at offset 0.
Writing GPT.

$ doas disklabel -E sd2
Label editor (enter '?' for help at any prompt)
sd2> a a
offset: [64]
size: [31101776] 25M
FS type: [4.2BSD] RAID
sd2*> w
sd2> q
No label changes

Encrypt with bioctl using a unique Passphrase:

$ doas bioctl -c C -l sd2a softraid0
New passphrase:
Re-type passphrase:
softraid0: CRYPTO volume attached as sd3

Create an i partition on the new crypto volume and the filesystem:

$ doas fdisk -giy sd3
Writing MBR at offset 0.
Writing GPT.

$ doas disklabel -E sd3
Label editor (enter '?' for help at any prompt)
sd3> a i
offset: [64]
size: [16001]
FS type: [4.2BSD]
sd3*> w
sd3> q
No label changes.

$ doas newfs sd3i

Mount the filesystem and copy the temporary directory with the keyring:

doas mkdir /mnt/encrypted-storage

doas mount /dev/sd3i /mnt/encrypted-storage

doas cp -av $GNUPGHOME /mnt/encrypted-storage

Note To set up multiple YubiKeys, keep the backup mounted or terminate GnuPG before saving.

Otherwise, unmount and disconnect the encrypted volume:

doas umount /mnt/encrypted-storage

doas bioctl -d sd3

See OpenBSD FAQ#14 for more information.

Export public key

Important Without the public key, it will not be possible to use GnuPG to decrypt nor sign messages. However, YubiKey can still be used for SSH authentication.

Create another partition on the portable storage device to store the public key, or reconnect networking and upload to a key server.

Linux

Using the same /dev/sdc device as in the previous step, create a small (at least 20 Mb is recommended) partition for storing materials:

sudo fdisk /dev/sdc <<EOF
n


+20M
w
EOF

Create a filesystem and export the public key:

sudo mkfs.ext2 /dev/sdc2

sudo mkdir /mnt/public

sudo mount /dev/sdc2 /mnt/public

gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc

sudo chmod 0444 /mnt/public/0x*.asc

Unmount and remove the storage device:

sudo umount /mnt/public

OpenBSD

$ doas disklabel -E sd2
Label editor (enter '?' for help at any prompt)
sd2> a b
offset: [32130]
size: [31069710] 25M
FS type: [swap] 4.2BSD
sd2*> w
sd2> q
No label changes.

Create a filesystem and export the public key to it:

doas newfs sd2b

doas mkdir /mnt/public

doas mount /dev/sd2b /mnt/public

gpg --armor --export $KEYID | doas tee /mnt/public/$KEYID-$(date +%F).asc

Windows

gpg -o \path\to\dir\pubkey.gpg --armor --export $KEYID

Configure YubiKey

If the card is locked, Reset it.

Windows Use the YubiKey Manager application (note, this is not the similarly named older YubiKey NEO Manager) to enable CCID functionality.

Enable KDF

Key Derived Function (KDF) enables YubiKey to store the hash of PIN, preventing the PIN from being passed as plain text.

Note This feature may not be compatible with older GnuPG versions, especially mobile clients. These incompatible clients will not function because the PIN will always be rejected.

Enable KDF using the default Admin pin of 12345678:

gpg --command-fd=0 --pinentry-mode=loopback --card-edit <<EOF
admin
kdf-setup
12345678
EOF

This step must be completed before changing PINs or moving keys or an error will occur: gpg: error for setup KDF: Conditions of use not satisfied

Change PIN

YubiKey's PGP interface has its own PINs separate from other modules such as PIV:

Name Default value Capability
User PIN 123456 cryptographic operations (decrypt, sign, authenticate)
Admin PIN 12345678 reset PIN, change Reset Code, add keys and owner information
Reset Code None reset PIN (more information)

Determine the desired PIN values. They can be shorter than the GnuPG identity passphrase due to limited brute-forcing opportunities. The User PIN should be convenient enough to remember for every-day use.

The User PIN must be at least 6 characters and the Admin PIN must be at least 8 characters. A maximum of 127 ASCII characters are allowed. See the GnuPG documentation on Managing PINs for more information.

Set PINs manually or generate them, for example a 6 digit User PIN and 8 digit Admin PIN:

ADMIN_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w8 | head -1)

USER_PIN=$(LC_ALL=C tr -dc '0-9' < /dev/urandom | fold -w6 | head -1)

echo "\nAdmin PIN: $ADMIN_PIN\nUser PIN:  $USER_PIN"

Update the Admin PIN:

gpg --command-fd=0 --pinentry-mode=loopback --change-pin <<EOF
3
12345678
$ADMIN_PIN
$ADMIN_PIN
q
EOF

Update the User PIN:

gpg --command-fd=0 --pinentry-mode=loopback --change-pin <<EOF
1
123456
$USER_PIN
$USER_PIN
q
EOF

Remove and re-insert YubiKey.

Warning Three incorrect User PIN entries will cause it to become blocked and must be unblocked with either the Admin PIN or Reset Code. Three incorrect Admin PIN or Reset Code entries will destroy data on YubiKey.

The number of retry attempts can be changed, for example to 5 attempts:

ykman openpgp access set-retries 5 5 5 -f -a $ADMIN_PIN

Set attributes

Set the smart card attributes with gpg --edit-card and admin mode - use help to see available options.

Or use predetermined values:

gpg --command-fd=0 --pinentry-mode=loopback --edit-card <<EOF
admin
login
example@yubikey
$ADMIN_PIN
name
User
YubiKey
quit
EOF

Transfer Subkeys

Important Verify a backup of Subkeys was made before proceeding. Transferring keys to YubiKey is a one-way operation: keytocard converts the local, on-disk key into a stub, which means the on-disk copy is no longer usable to transfer to subsequent YubiKeys.

The currently selected key(s) are indicated with an * symbol. When transferring keys, only one subkey must be selected at a time.

The Certify key passphrase and Admin PIN are required to transfer keys.

Signature key

Transfer the first key:

gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID <<EOF
key 1
keytocard
1
$PASS
$ADMIN_PIN
save
EOF

Encryption key

Repeat the process for the second key:

gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID <<EOF
key 2
keytocard
2
$PASS
$ADMIN_PIN
save
EOF

Authentication key

Repeat the process for the third key:

gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID <<EOF
key 3
keytocard
3
$PASS
$ADMIN_PIN
save
EOF

Verify transfer

Verify Subkeys have been moved to YubiKey with gpg -K and look for ssb>, for example:

sec   rsa4096/0xF0F2CFEB04341FB5 2024-01-01 [C]
      Key fingerprint = 4E2C 1FA3 372C BA96 A06A  C34A F0F2 CFEB 0434 1FB5
uid                   [ultimate] YubiKey User <yubikey@example>
ssb>  rsa4096/0xB3CD10E502E19637 2024-01-01 [S] [expires: 2026-01-01]
ssb>  rsa4096/0x30CBE8C4B085B9F7 2024-01-01 [E] [expires: 2026-01-01]
ssb>  rsa4096/0xAD9E24E1B8CB9600 2024-01-01 [A] [expires: 2026-01-01]

A > after a tag indicates the key is stored on a smart card.

Finish setup

Verify you have done the following:

  • Memorized or wrote down the Certify key passphrase to a secure and durable location
  • Saved the Certify key and Subkeys to encrypted portable storage, to be kept offline
  • Memorized or wrote down passphrase to encrypted volume on portable storage
  • Exported a copy of the public key where is can be easily accessed later
  • Memorized or wrote down the User Pin and Admin PIN, which are unique and changed from default values
  • Moved Encryption, Signature and Authentication Subkeys to YubiKey (gpg -K shows ssb> for 3 Subkeys)

Reboot to clear the ephemeral environment and complete setup.

The YubiKey(s) are now ready for use.

Using YubiKey

Initialize GnuPG:

gpg -k

Import or create a hardened configuration:

cd ~/.gnupg

wget https://raw.githubusercontent.com/drduh/config/master/gpg.conf

Set the following option. This avoids the problem where GnuPG will prompt, repeatedly, for the insertion of an already-inserted YubiKey:

touch scdaemon.conf

echo "disable-ccid" >>scdaemon.conf

The disable-ccid option is only required for GnuPG versions 2.3 or later. However, setting this option does not appear to interfere with the operation of earlier versions of GnuPG so it is recommended for all installations.

Install the required packages:

Debian and Ubuntu

sudo apt update

sudo apt install -y gnupg2 gnupg-agent gnupg-curl scdaemon pcscd

OpenBSD

Requires a reboot.

doas pkg_add gnupg pcsc-tools

doas rcctl enable pcscd

doas reboot

Mount the non-encrypted volume with the public key:

doas mkdir /mnt/public

doas mount /dev/sd3i /mnt/public

Import it:

gpg --import /mnt/public/0x*.asc

Or download the public key from a keyserver:

gpg --recv $KEYID

Or with the URL on YubiKey, retrieve the public key:

gpg/card> fetch

gpg/card> quit

Determine the key ID:

KEYID=0xF0F2CFEB04341FB5

Assign ultimate trust by typing trust and selecting option 5 then quit:

gpg --command-fd=0 --pinentry-mode=loopback --edit-key $KEYID <<EOF
trust
5
y
save
EOF

Remove and re-insert YubiKey.

Verify the status with gpg --card-status which will be similar to:

Reader ...........: Yubico YubiKey OTP FIDO CCID 00 00
Application ID ...: D2760001240102010006055532110000
Application type .: OpenPGP
Version ..........: 3.4
Manufacturer .....: Yubico
Serial number ....: 05553211
Name of cardholder: YubiKey User
Language prefs ...: en
Salutation .......:
URL of public key : [not set]
Login data .......: yubikey@example
Signature PIN ....: not forced
Key attributes ...: rsa4096 rsa4096 rsa4096
Max. PIN lengths .: 127 127 127
PIN retry counter : 3 3 3
Signature counter : 0
KDF setting ......: on
Signature key ....: CF5A 305B 808B 7A0F 230D  A064 B3CD 10E5 02E1 9637
      created ....: 2024-01-01 12:00:00
Encryption key....: A5FA A005 5BED 4DC9 889D  38BC 30CB E8C4 B085 B9F7
      created ....: 2024-01-01 12:00:00
Authentication key: 570E 1355 6D01 4C04 8B6D  E2A3 AD9E 24E1 B8CB 9600
      created ....: 2024-01-01 12:00:00
General key info..: sub  rsa4096/0xB3CD10E502E19637 2024-01-01 YubiKey User <yubikey@example>
sec#  rsa4096/0xF0F2CFEB04341FB5  created: 2024-01-01  expires: never
ssb>  rsa4096/0xB3CD10E502E19637  created: 2024-01-01  expires: 2026-01-01
                                  card-no: 0006 05553211
ssb>  rsa4096/0x30CBE8C4B085B9F7  created: 2024-01-01  expires: 2026-01-01
                                  card-no: 0006 05553211
ssb>  rsa4096/0xAD9E24E1B8CB9600  created: 2024-01-01  expires: 2026-01-01
                                  card-no: 0006 05553211

sec# indicates the corresponding key is not available (the Certify key is offline).

Note If General key info..: [none] appears in the output instead - go back and import the public key using the previous step.

Encryption

Encrypt a message to yourself (useful for storing credentials or protecting backups):

echo "\ntest message string" | \
  gpg --encrypt --armor --recipient $KEYID -o encrypted.txt

To encrypt to multiple recipients or keys (the preferred key ID goes last):

echo "test message string" | \
    gpg --encrypt --armor \
    --recipient $KEYID_0 --recipient $KEYID_1 --recipient $KEYID_2 \
    -o encrypted.txt

Decrypt the message - a User PIN prompt will appear:

gpg --decrypt --armor encrypted.txt

Use a shell function to make encrypting files easier:

secret () {
  output=~/"${1}".$(date +%s).enc
  gpg --encrypt --armor --output ${output} \
    -r $KEYID "${1}" && echo "${1} -> ${output}"
}

reveal () {
  output=$(echo "${1}" | rev | cut -c16- | rev)
  gpg --decrypt --output ${output} "${1}" && \
    echo "${1} -> ${output}"
}

Example output:

$ secret document.pdf
document.pdf -> document.pdf.1580000000.enc

$ reveal document.pdf.1580000000.enc
gpg: anonymous recipient; trying secret key 0xF0F2CFEB04341FB5 ...
gpg: okay, we are the anonymous recipient.
gpg: encrypted with RSA key, ID 0x0000000000000000
document.pdf.1580000000.enc -> document.pdf

drduh/Purse is a password manager based on GnuPG and YubiKey to securely store and use credentials.

Signature

Sign a message:

echo "test message string" | gpg --armor --clearsign > signed.txt

Verify the signature:

gpg --verify signed.txt

The output will be similar to:

gpg: Signature made Mon 01 Jan 2024 12:00:00 PM UTC
gpg:                using RSA key CF5A305B808B7A0F230DA064B3CD10E502E19637
gpg: Good signature from "YubiKey User <yubikey@example>" [ultimate]
Primary key fingerprint: 4E2C 1FA3 372C BA96 A06A  C34A F0F2 CFEB 0434 1FB5
     Subkey fingerprint: CF5A 305B 808B 7A0F 230D  A064 B3CD 10E5 02E1 9637

Configure touch

Note This is not possible on YubiKey NEO.

By default, YubiKey will perform cryptographic operations without requiring any action from the user after the key is unlocked once with the PIN.

To require a touch for each key operation, use YubiKey Manager and the Admin PIN to set policy:

Encryption:

ykman openpgp keys set-touch dec on

Note Versions of YubiKey Manager before 5.1.0 use enc instead of dec for encryption. Older versions of YubiKey Manager use touch instead of set-touch

Signature:

ykman openpgp keys set-touch sig on

Authentication:

ykman openpgp keys set-touch aut on

To view and adjust policy options:

ykman openpgp keys set-touch -h

Cached or Cached-Fixed may be desirable for YubiKey use with email clients.

YubiKey will blink when it is waiting for a touch. On Linux, maximbaz/yubikey-touch-detector can be used to indicate YubiKey is waiting for a touch.

SSH

Import or create a hardened configuration:

cd ~/.gnupg

wget https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf

Important The cache-ttl options do not apply when using YubiKey as a smart card, because the PIN is cached by the smart card itself. To clear the PIN from cache (equivalent to default-cache-ttl and max-cache-ttl), unplug YubiKey, or set forcesig when editing the card to be prompted for the PIN each time.

Tip Set pinentry-program to /usr/bin/pinentry-gnome3 for a GUI-based prompt.

macOS

Install pinentry with brew install pinentry-mac then edit gpg-agent.conf to set the pinentry-program path to:

  • Apple Silicon Macs: /opt/homebrew/bin/pinentry-mac
  • Intel Macs: /usr/local/bin/pinentry-mac
  • MacGPG Suite: /usr/local/MacGPG2/libexec/pinentry-mac.app/Contents/MacOS/pinentry-mac

Then run gpgconf --kill gpg-agent for the change to take effect.

To use graphical applications on macOS, additional setup is required.

Create $HOME/Library/LaunchAgents/gnupg.gpg-agent.plist with the following contents:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
  "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>Label</key>
        <string>gnupg.gpg-agent</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/local/MacGPG2/bin/gpg-connect-agent</string>
            <string>/bye</string>
        </array>
    </dict>
</plist>

Load it:

launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent.plist

Create $HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist with the following contens:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/ProperyList-1.0/dtd">
<plist version="1.0">
    <dict>
        <key>Label</key>
        <string>gnupg.gpg-agent-symlink</string>
        <key>ProgramArguments</key>
        <array>
            <string>/bin/sh</string>
            <string>-c</string>
            <string>/bin/ln -sf $HOME/.gnupg/S.gpg-agent.ssh $SSH_AUTH_SOCK</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
    </dict>
</plist>

Load it:

launchctl load $HOME/Library/LaunchAgents/gnupg.gpg-agent-symlink.plist

Reboot or to activate changes.

Windows

Windows can already have some virtual smart card readers installed, like the one provided for Windows Hello. To verify YubiKey is the correct one used by scdaemon, add it to its configuration.

Find the YubiKey label using PowerShell:

PS C:\WINDOWS\system32> Get-PnpDevice -Class SoftwareDevice | Where-Object {$_.FriendlyName -like "*YubiKey*"} | Select-Object -ExpandProperty FriendlyName
Yubico YubiKey OTP+FIDO+CCID 0

See How to setup Signed Git Commits with a YubiKey NEO and GPG and Keybase on Windows (2018) for more information.

Edit %APPDATA%/gnupg/scdaemon.conf to add:

reader-port <device name, e.g. Yubico YubiKey OTP+FIDO+CCID 0>

Edit %APPDATA%/gnupg/gpg-agent.conf to add:

enable-ssh-support
enable-putty-support

Restart the agent:

gpg-connect-agent killagent /bye
gpg-connect-agent /bye

Verify YubiKey details:

gpg --card-status

Import the public key and set ultimate trust:

gpg --import <path to public key file>

Retrieve the public key id:

gpg --list-public-keys

Export the SSH public key:

gpg --export-ssh-key <public key id>

Copy the public SSH key to a file - it corresponds to the secret key on YubiKey and can be copied to SSH destination hosts.

Create a shortcut that points to gpg-connect-agent /bye and place it in the startup folder shell:startup to make sure the agent starts after reboot. Modify the shortcut properties so it starts in a "Minimized" window.

PuTTY can now be used for public-key SSH authentication. When the server asks for public-key verification, PuTTY will forward the request to GnuPG, which will prompt for a PIN to authorize the operation.

WSL

The goal is to configure SSH client inside WSL work together with the Windows agent, such as gpg-agent.exe.

See the WSL agent architecture illustration for an overview.

Note GnuPG forwarding for cryptographic operations is not supported. See vuori/weasel-pageant for more information.

One way to forward is just ssh -A (still need to eval weasel to setup local ssh-agent), and only relies on OpenSSH. In this track, ForwardAgent and AllowAgentForwarding in ssh/sshd config may be involved. However, when using ssh socket forwarding, do not enable ForwardAgent in ssh config. See SSH Agent Forwarding for more information. This requires Ubuntu 16.04 or newer for WSL and Kleopatra.

Download vuori/weasel-pageant.

Add eval $(/mnt/c/<path of extraction>/weasel-pageant -r -a /tmp/S.weasel-pageant) to the shell rc file. Use a named socket here so it can be used in the RemoteForward directive of ~/.ssh/config. Source it with source ~/.bashrc.

Display the SSH key with $ ssh-add -l

Edit ~/.ssh/config to add the following for each agent forwarding host:

RemoteForward <remote SSH socket path> /tmp/S.weasel-pageant

Note The remote SSH socket path can be found with gpgconf --list-dirs agent-ssh-socket

Add the following to the shell rc file:

export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)

Add the following to /etc/ssh/sshd_config:

StreamLocalBindUnlink yes

Reload SSH daemon:

sudo service sshd reload

Unplug YubiKey, disconnect or reboot. Log back into Windows, open a WSL console and enter ssh-add -l - no output should appear.

Plug in YubiKey, enter the same command to display the ssh key.

Connect to the remote host and use ssh-add -l to confirm forwarding works.

Agent forwarding may be chained through multiple hosts. Follow the same protocol to configure each host.

Replace agents

To launch gpg-agent for use by SSH, use the gpg-connect-agent /bye or gpgconf --launch gpg-agent commands.

Add the following to the shell rc file:

export GPG_TTY="$(tty)"
export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"
gpg-connect-agent updatestartuptty /bye > /dev/null

On modern systems, gpgconf --list-dirs agent-ssh-socket will automatically set SSH_AUTH_SOCK to the correct value and is better than hard-coding to run/user/$UID/gnupg/S.gpg-agent.ssh, if available:

export GPG_TTY="$(tty)"
export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)
gpgconf --launch gpg-agent

For fish, config.fish should look like this (consider putting them into the is-interactive block):

set -x GPG_TTY (tty)
set -x SSH_AUTH_SOCK (gpgconf --list-dirs agent-ssh-socket)
gpgconf --launch gpg-agent

When using ForwardAgent for ssh-agent forwarding, SSH_AUTH_SOCK only needs to be set on the local host, where YubiKey is connected. On the remote host, ssh will set SSH_AUTH_SOCK to something like /tmp/ssh-mXzCzYT2Np/agent.7541 upon connection. Do not set SSH_AUTH_SOCK on the remote host - doing so will break SSH Agent Forwarding.

For S.gpg-agent.ssh (see SSH Agent Forwarding for more info), SSH_AUTH_SOCK should also be set on the remote. However, GPG_TTY should not be set on the remote, explanation specified in that section.

Copy public key

Note It is not necessary to import the GnuPG public key in order to use SSH only.

Copy and paste the output from ssh-add to the server's authorized_keys file:

$ ssh-add -L
ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211

Optional Save the public key for identity file configuration. By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or to avoid being fingerprinted by untrusted ssh servers. To do this you'll need to use the command line argument -i [identity_file] or the IdentityFile and IdentitiesOnly options in .ssh/config.

The argument provided to IdentityFile is traditionally the path to the private key file (for example IdentityFile ~/.ssh/id_rsa). For YubiKey, IdentityFile must point to the public key file, and ssh will select the appropriate private key from those available via ssh-agent. To prevent ssh from trying all keys in the agent, use IdentitiesOnly yes along with one or more -i or IdentityFile options for the target host.

To reiterate, with IdentitiesOnly yes, ssh will not enumerate public keys loaded into ssh-agent or gpg-agent. This means public-key authentication will not proceed unless explicitly named by ssh -i [identity_file] or in .ssh/config on a per-host basis.

In the case of YubiKey usage, to extract the public key from the ssh agent:

ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub

Then explicitly associate this YubiKey-stored key for used with a host, github.com for example, as follows:

$ cat << EOF >> ~/.ssh/config
Host github.com
    IdentitiesOnly yes
    IdentityFile ~/.ssh/id_rsa_yubikey.pub
EOF

Connect with public key authentication:

$ ssh git@github.com -vvv
[...]
debug2: key: cardno:000605553211 (0x1234567890),
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: cardno:000605553211
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 535
debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3
debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3
debug1: Authentication succeeded (publickey).
[...]

Tip To make multiple connections or securely transfer many files, use the ControlMaster ssh option.

Import SSH keys

If there are existing SSH keys to make available via gpg-agent, they will need to be imported. Then, remove the original private keys. When importing the key, gpg-agent uses the key filename as the label - this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey in place and importing ~/.ssh/id_rsa:

$ ssh-add -l
4096 SHA256:... cardno:00060123456 (RSA)

$ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa

When invoking ssh-add, a prompt for the SSH key passphrase will appear, then the pinentry program will prompt and confirm a new passphrase to encrypt the converted key within the GnuPG key store.

The migrated key will be listed in ssh-add -l:

$ ssh-add -l
4096 SHA256:... cardno:00060123456 (RSA)
2048 SHA256:... /Users/username/.ssh/id_rsa (RSA)

To show the keys with MD5 fingerprints, as used by gpg-connect-agent's KEYINFO and DELETE_KEY commands:

$ ssh-add -E md5 -l
4096 MD5:... cardno:00060123456 (RSA)
2048 MD5:... /Users/username/.ssh/id_rsa (RSA)

When using the key pinentry will be invoked to request the key passphrase. The passphrase will be cached for up to 10 idle minutes between uses, up to a maximum of 2 hours.

SSH agent forwarding

Warning SSH Agent Forwarding can add additional risk - proceed with caution!

There are two methods for ssh-agent forwarding, one is provided by OpenSSH and the other is provided by GnuPG.

The latter one may be more insecure as raw socket is just forwarded (not like S.gpg-agent.extra with only limited functionality; if ForwardAgent implemented by OpenSSH is just forwarding the raw socket, then they are insecure to the same degree). But for the latter one, one convenience is that one may forward once and use this agent everywhere in the remote. So again, proceed with caution!

For example, tmux does not have environment variables such as $SSH_AUTH_SOCK when connecting to remote hosts and attaching an existing session. For each shell, find the socket and export SSH_AUTH_SOCK=/tmp/ssh-agent-xxx/xxxx.socket. However, with S.gpg-agent.ssh in a fixed place, it can be used as the ssh-agent in shell rc files.

Use ssh-agent

You should now be able to use ssh -A remote on the local host to log into remote host, and should then be able to use YubiKey as if it were connected to the remote host. For example, using e.g. ssh-add -l on that remote host will show the public key from the YubiKey (cardno:). Always use ForwardAgent yes only for a single host, never for all servers.

Use S.gpg-agent.ssh

First you need to go through GnuPG agent forwarding), know the conditions for gpg-agent forwarding and know the location of S.gpg-agent.ssh on both the local and the remote.

You may use the command:

$ gpgconf --list-dirs agent-ssh-socket

Edit .ssh/config to add the remote host:

Host
  Hostname remote-host.tld
  StreamLocalBindUnlink yes
  RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh
  # RemoteForward [remote socket] [local socket]
  # Note that ForwardAgent is not wanted here!

After successfully ssh into the remote host, confirm /run/user/1000/gnupg/S.gpg-agent.ssh exists.

Then in the remote you can type in command line or configure in the shell rc file with:

export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"

After sourcing the shell rc file, ssh-add -l will return the correct public key.

Note In this process no gpg-agent in the remote is involved, hence gpg-agent.conf in the remote is of no use. Also pinentry is invoked locally.

Chained forwarding

If you use ssh-agent provided by OpenSSH and want to forward it into a third box, you can just ssh -A third on the remote.

Meanwhile, if you use S.gpg-agent.ssh, assume you have gone through the steps above and have S.gpg-agent.ssh on the remote, and you would like to forward this agent into a third box, first you may need to configure sshd_config and SSH_AUTH_SOCK of third in the same way as remote, then in the ssh config of remote, add the following lines

Host third
  Hostname third-host.tld
  StreamLocalBindUnlink yes
  RemoteForward /run/user/1000/gnupg/S.gpg-agent.ssh /run/user/1000/gnupg/S.gpg-agent.ssh
  #RemoteForward [remote socket] [local socket]
  #Note that ForwardAgent is not wanted here!

The path must be set according to gpgconf --list-dirs agent-ssh-socket on remote and third hosts.

GitHub

YubiKey can be used to sign commits and tags, and authenticate SSH to GitHub when configured in Settings.

Configure a signing key:

git config --global user.signingkey $KEYID

Important The user.email option must match the email address associated with the PGP identity.

To sign commits or tags, use the -S option.

Windows

Configure authentication:

git config --global core.sshcommand "plink -agent"

git config --global gpg.program 'C:\Program Files (x86)\GnuPG\bin\gpg.exe'

Then update the repository URL to git@github.com:USERNAME/repository

Note For the error gpg: signing failed: No secret key - run gpg --card-status with YubiKey plugged in and try the git command again.

GnuPG agent forwarding

YubiKey can be used sign git commits and decrypt files on remote hosts with GnuPG Agent Forwarding. To ssh through another network, especially to push to/pull from GitHub using ssh, see Remote Machines (SSH Agent forwarding).

gpg-agent.conf is not needed on the remote host; after forwarding, remote GnuPG directly communicates with S.gpg-agent without starting gpg-agent on the remote host.

On the remote host, edit /etc/ssh/sshd_config to set StreamLocalBindUnlink yes

Optional Without root access on the remote host to edit /etc/ssh/sshd_config, socket located at gpgconf --list-dir agent-socket on the remote host will need to be removed before forwarding works. See AgentForwarding GNUPG wiki page for more information.

Import the public key on the remote host. On the local host, copy the public keyring to the remote host:

scp ~/.gnupg/pubring.kbx remote:~/.gnupg/

On modern distributions, such as Fedora 30, there is no need to set RemoteForward in ~/.ssh/config

Legacy distributions

On the local host, run:

gpgconf --list-dirs agent-extra-socket

This should return a path to agent-extra-socket - /run/user/1000/gnupg/S.gpg-agent.extra - though on older Linux distros (and macOS) it may be /home/<user>/.gnupg/S/gpg-agent.extra

Find the agent socket on the remote host:

gpgconf --list-dirs agent-socket

This should return a path such as /run/user/1000/gnupg/S.gpg-agent

Finally, enable agent forwarding for a given host by adding the following to the local host's ~/.ssh/config (agent sockets may differ):

Host
  Hostname remote-host.tld
  StreamLocalBindUnlink yes
  RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent.extra
  #RemoteForward [remote socket] [local socket]

It may be necessary to edit gpg-agent.conf on the local host to add the following information:

pinentry-program /usr/bin/pinentry-gtk-2
extra-socket /run/user/1000/gnupg/S.gpg-agent.extra

Note The pinentry program starts on the local host, not remote.

Important Any pinentry program except pinentry-tty or pinentry-curses may be used. This is because local gpg-agent may start headlessly (by systemd without $GPG_TTY set locally telling which tty it is on), thus failed to obtain the pin. Errors on the remote may be misleading saying that there is IO Error. (Yes, internally there is actually an IO Error since it happens when writing to/reading from tty while finding no tty to use, but for end users this is not friendly.)

See Issue #85 for more information and troubleshooting.

Chained GnuPG agent forwarding

Assume you have gone through the steps above and have S.gpg-agent on the remote, and you would like to forward this agent into a third box, first you may need to configure sshd_config of third in the same way as remote, then in the ssh config of remote, add the following lines:

Host third
  Hostname third-host.tld
  StreamLocalBindUnlink yes
  RemoteForward /run/user/1000/gnupg/S.gpg-agent /run/user/1000/gnupg/S.gpg-agent
  #RemoteForward [remote socket] [local socket]

You should change the path according to gpgconf --list-dirs agent-socket on remote and third.

Note On local you have S.gpg-agent.extra whereas on remote and third, you only have S.gpg-agent

Using multiple YubiKeys

When a GnuPG key is added to YubiKey using keytocard, the key is deleted from the keyring and a stub is added, pointing to the YubiKey. The stub identifies the GnuPG key ID and YubiKey serial number.

When a Subkey is added to an additional YubiKey, the stub is overwritten and will now point to the latest YubiKey. GnuPG will request a specific YubiKey by serial number, as referenced by the stub, and will not recognize another YubiKey with a different serial number.

To scan an additional YubiKey and recreate the correct stub:

gpg-connect-agent "scd serialno" "learn --force" /bye

Alternatively, use a script to delete the GnuPG shadowed key, where the card serial number is stored (see GnuPG #T2291):

cat >> ~/scripts/remove-keygrips.sh <<EOF
#!/usr/bin/env bash
(( $# )) || { echo "Specify a key." >&2; exit 1; }
KEYGRIPS=$(gpg --with-keygrip --list-secret-keys "$@" | awk '/Keygrip/ { print $3 }')
for keygrip in $KEYGRIPS
do
    rm "$HOME/.gnupg/private-keys-v1.d/$keygrip.key" 2> /dev/null
done

gpg --card-status
EOF

chmod +x ~/scripts/remove-keygrips.sh

~/scripts/remove-keygrips.sh $KEYID

See discussion in Issues #19 and #112 for more information and troubleshooting steps.

Email

YubiKey can be used to decrypt and sign emails and attachments using Thunderbird, Enigmail and Mutt. Thunderbird supports OAuth 2 authentication and can be used with Gmail. See this EFF guide for more information. Mutt has OAuth 2 support since version 2.0.

Mailvelope

Mailvelope allows YubiKey to be used with Gmail and others.

Important Mailvelope does not work with the throw-keyids option set in gpg.conf

On macOS, install gpgme using Homebrew:

brew install gpgme

To allow Chrome to run gpgme, edit ~/Library/Application\ Support/Google/Chrome/NativeMessagingHosts/gpgmejson.json to add:

{
    "name": "gpgmejson",
    "description": "Integration with GnuPG",
    "path": "/usr/local/bin/gpgme-json",
    "type": "stdio",
    "allowed_origins": [
        "chrome-extension://kajibbejlbohfaggdiogboambcijhkke/"
    ]
}

Edit the default path to allow Chrome to find GnuPG:

sudo launchctl config user path /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin

Finally, install the Mailvelope extension from the Chrome web store.

Mutt

Mutt has both CLI and TUI interfaces - the latter provides powerful functions for processing email. In addition, PGP can be integrated such that cryptographic operations can be done without leaving TUI.

To enable GnuPG support, copy /usr/share/doc/mutt/samples/gpg.rc

Edit the file to enable options pgp_default_key, pgp_sign_as and pgp_autosign

source the file in muttrc

Important pinentry-tty set as the pinentry program in gpg-agent.conf is reported to cause problems with Mutt TUI, because it uses curses. It is recommended to use pinentry-curses or other graphic pinentry program instead.

Keyserver

Public keys can be uploaded to a public server for discoverability:

gpg --send-key $KEYID

gpg --keyserver keys.gnupg.net --send-key $KEYID

gpg --keyserver hkps://keyserver.ubuntu.com:443 --send-key $KEYID

Or if uploading to keys.openpgp.org:

gpg --send-key $KEYID | curl -T - https://keys.openpgp.org

The public key URL can also be added to YubiKey (based on Shaw 2003):

URL="hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=${KEYID}"

Edit YubiKey with gpg --edit-card and the Admin PIN:

gpg/card> admin

gpg/card> url
URL to retrieve public key: hkps://keyserver.ubuntu.com:443/pks/lookup?op=get&search=0xFF00000000000000

gpg/card> quit

Updating keys

PGP does not provide forward secrecy, meaning a compromised key may be used to decrypt all past messages. Although keys stored on YubiKey are more difficult to exploit, it is not impossible: the key and PIN could be physically compromised, or a vulnerability may be discovered in firmware or in the random number generator used to create keys, for example. Therefore, it is recommended practice to rotate Subkeys periodically.

When a Subkey expires, it can either be renewed or replaced. Both actions require access to the Certify key.

  • Renewing Subkeys by updating expiration indicates continued possession of the Certify key and is more convenient.

  • Replacing Subkeys is less convenient but potentially more secure: the new Subkeys will not be able to decrypt previous messages, authenticate with SSH, etc. Contacts will need to receive the updated public key and any encrypted secrets need to be decrypted and re-encrypted to new Subkeys to be usable. This process is functionally equivalent to losing the YubiKey and provisioning a new one.

Neither rotation method is superior and it is up to personal philosophy on identity management and individual threat modeling to decide which one to use, or whether to expire Subkeys at all. Ideally, Subkeys would be ephemeral: used only once for each unique encryption, signature and authentication event, however in practice that is not really practical nor worthwhile with YubiKey. Advanced users may dedicate an air-gapped machine for frequent credential rotation.

To renew or rotate Subkeys, follow the same process as generating keys: boot to a secure environment, install required software and disconnect networking.

Connect the portable storage device with the Certify key and identify the disk label.

Decrypt and mount the encrypted volume:

sudo cryptsetup luksOpen /dev/sdc1 gnupg-secrets

sudo mkdir /mnt/encrypted-storage

sudo mount /dev/mapper/gnupg-secrets /mnt/encrypted-storage

Mount the non-encrypted public partition:

sudo mkdir /mnt/public

sudo mount /dev/sdc2 /mnt/public

Copy the original private key materials to a temporary working directory:

GNUPGHOME=$(mktemp -d -t gnupg-$(date +%Y-%m-%d)-XXXXXXXXXX)

cd $GNUPGHOME

cp -avi /mnt/encrypted-storage/gnupg-*/* $GNUPGHOME

Confirm the identity is available, set it and the key fingerprint:

gpg -K

KEYID=$(gpg -K | grep -Po "(0x\w+)" | head -1)

KEYFPR=$(gpg --fingerprint "$KEYID" | grep -Eo '([0-9A-F][0-9A-F ]{49})' | head -n 1 | tr -d ' ')

Recall the identity passphrase and set it, for example:

PASS=ABCD-0123-IJKL-4567-QRST-UVWX

Renew Subkeys

Determine the updated expiration, for example:

EXPIRATION=2026-09-01

EXPIRATION=2y

Renew the Subkeys:

gpg --batch --pinentry-mode=loopback \
  --passphrase "$PASS" --quick-set-expire "$KEYFPR" "$EXPIRATION" "*"

Export the updated public key:

gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc

Transfer the public key to the destination host and import it:

gpg --import 0x*.asc

Alternatively, publish to a public key server and download it:

gpg --send-key $KEYID

gpg --recv $KEYID

The validity of the GnuPG identity will be extended, allowing it to be used again for encryption and signature operations.

The SSH public key does not need to be updated on remote hosts.

Rotate Subkeys

Follow the original procedure to Create Subkeys.

Previous Subkeys can be deleted from the identity.

Finish by transfering new Subkeys to YubiKey.

Copy the new temporary working directory to encrypted storage, which is still mounted:

sudo cp -avi $GNUPGHOME /mnt/encrypted-storage

Unmount and close the encrypted volume:

sudo umount /mnt/encrypted-storage

sudo cryptsetup luksClose gnupg-secrets

Export the updated public key:

sudo mkdir /mnt/public

sudo mount /dev/sdc2 /mnt/public

gpg --armor --export $KEYID | sudo tee /mnt/public/$KEYID-$(date +%F).asc

sudo umount /mnt/public

Disconnect the storage device and follow the original steps to transfer new Subkeys (4, 5 and 6) to YubiKey, replacing existing ones.

Reboot or securely erase the GnuPG temporary working directory.

Reset YubiKey

If PIN attempts are exceeded, the YubiKey is locked and must be Reset and set up again using the encrypted backup.

Copy the following to a file and run gpg-connect-agent -r $file to lock and terminate the card. Then re-insert YubiKey to complete reset.

/hex
scd serialno
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 81 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
scd apdu 00 20 00 83 08 40 40 40 40 40 40 40 40
scd apdu 00 e6 00 00
scd apdu 00 44 00 00
/echo Card has been successfully reset.
/bye

Or use ykman (sometimes in ~/.local/bin/):

$ ykman openpgp reset
WARNING! This will delete all stored OpenPGP keys and data and restore factory settings? [y/N]: y
Resetting OpenPGP data, don't remove your YubiKey...
Success! All data has been cleared and default PINs are set.
PIN:         123456
Reset code:  NOT SET
Admin PIN:   12345678

Notes

  1. YubiKey has two configurations, invoked with either a short or long press. By default, the short-press mode is configured for HID OTP; a brief touch will emit an OTP string starting with cccccccc. OTP mode can be swapped to the second configuration via the YubiKey Personalization tool or disabled entirely using YubiKey Manager: ykman config usb -d OTP

  2. Using YubiKey for GnuPG keys does not prevent use of other features, such as WebAuthn, OTP and static password.

  3. Add additional identities to a Certify key with the adduid command during setup, then trust it ultimately with trust and 5 to configure for use.

  4. To switch between YubiKeys, unplug the first YubiKey and restart gpg-agent, ssh-agent and pinentry with pkill "gpg-agent|ssh-agent|pinentry" ; eval $(gpg-agent --daemon --enable-ssh-support) then insert the other YubiKey and run gpg-connect-agent updatestartuptty /bye

  5. To use YubiKey on multiple computers, import the corresponding public keys, then confirm YubiKey is visible with gpg --card-status. Trust the imported public keys ultimately with trust and 5, then gpg --list-secret-keys will show the correct and trusted key.

Troubleshooting

  • Use man gpg to understand GnuPG options and command-line flags.

  • To get more information on potential errors, restart the gpg-agent process with debug output to the console with pkill gpg-agent; gpg-agent --daemon --no-detach -v -v --debug-level advanced --homedir ~/.gnupg.

  • If you encounter problems connecting to YubiKey with GnuPG - try unplugging and re-inserting YubiKey, and restarting the gpg-agent process.

  • If you receive the error, gpg: decryption failed: secret key not available - you likely need to install GnuPG version 2.x. Another possibility is that there is a problem with the PIN, e.g. it is too short or blocked.

  • If you receive the error, Yubikey core error: no yubikey present - make sure the YubiKey is inserted correctly. It should blink once when plugged in.

  • If you still receive the error, Yubikey core error: no yubikey present - you likely need to install newer versions of yubikey-personalize as outlined in Install software.

  • If you receive the error, Yubikey core error: write error - YubiKey is likely locked. Install and run yubikey-personalization-gui to unlock it.

  • If you receive the error, Key does not match the card's capability - you likely need to use 2048 bit RSA key sizes.

  • If you receive the error, sign_and_send_pubkey: signing failed: agent refused operation - make sure you replaced ssh-agent with gpg-agent as noted above.

  • If you still receive the error, sign_and_send_pubkey: signing failed: agent refused operation - run the command gpg-connect-agent updatestartuptty /bye

  • If you still receive the error, sign_and_send_pubkey: signing failed: agent refused operation - edit ~/.gnupg/gpg-agent.conf to set a valid pinentry program path. gpg: decryption failed: No secret key could also indicate an invalid pinentry path

  • If you still receive the error, sign_and_send_pubkey: signing failed: agent refused operation - it is a known issue that openssh 8.9p1 and higher has issues with YubiKey. Adding KexAlgorithms -sntrup761x25519-sha512@openssh.com to /etc/ssh/ssh_config often resolves the issue.

  • If you receive the error, The agent has no identities from ssh-add -L, make sure you have installed and started scdaemon

  • If you receive the error, Error connecting to agent: No such file or directory from ssh-add -L, the UNIX file socket that the agent uses for communication with other processes may not be set up correctly. On Debian, try export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh". Also see that gpgconf --list-dirs agent-ssh-socket is returning single path, to existing S.gpg-agent.ssh socket.

  • If you receive the error, Permission denied (publickey), increase ssh verbosity with the -v flag and verify the public key from the card is being offered: Offering public key: RSA SHA256:abcdefg... cardno:00060123456. If it is, verify the correct user the target system - not the user on the local system. Otherwise, be sure IdentitiesOnly is not enabled for this host.

  • If SSH authentication still fails - add up to 3 -v flags to the ssh client to increase verbosity.

  • If it still fails, it may be useful to stop the background sshd daemon process service on the server (e.g. using sudo systemctl stop sshd) and instead start it in the foreground with extensive debugging output, using /usr/sbin/sshd -eddd. Note that the server will not fork and will only process one connection, therefore has to be re-started after every ssh test.

  • If you receive the error, Please insert the card with serial number see Using Multiple Keys.

  • If you receive the error, There is no assurance this key belongs to the named user or encryption failed: Unusable public key or No public key use gpg --edit-key to set trust to 5 = I trust ultimately

  • If, when you try the above command, you get the error Need the secret key to do this - specify trust for the key in ~/.gnupg/gpg.conf by using the trust-key [key ID] directive.

  • If, when using a previously provisioned YubiKey on a new computer with pass, you see the following error on pass insert, you need to adjust the trust associated with the key. See the note above.

gpg: 0x0000000000000000: There is no assurance this key belongs to the named user
gpg: [stdin]: encryption failed: Unusable public key

  • If you receive the error, gpg: 0x0000000000000000: skipped: Unusable public key, signing failed: Unusable secret key, or encryption failed: Unusable public key the Subkey may be expired and can no longer be used to encrypt nor sign messages. It can still be used to decrypt and authenticate, however.

  • If the pinentry graphical dialog does not show and this error appears: sign_and_send_pubkey: signing failed: agent refused operation, install the dbus-user-session package and restart for the dbus user session to be fully inherited. This is because pinentry complains about No $DBUS_SESSION_BUS_ADDRESS found, falls back to curses but doesn't find the expected tty

  • If, when you try the above --card-status command, you get receive the error, gpg: selecting card failed: No such device or gpg: OpenPGP card not available: No such device, it's possible that the latest release of pcscd is now requires polkit rules to operate properly. Create the following file to allow users in the wheel group to use the card. Be sure to restart pcscd when you're done to allow the new rules to take effect.

cat << EOF >  /etc/polkit-1/rules.d/99-pcscd.rules
polkit.addRule(function(action, subject) {
        if (action.id == "org.debian.pcsc-lite.access_card" &&
                subject.isInGroup("wheel")) {
                return polkit.Result.YES;
        }
});
polkit.addRule(function(action, subject) {
        if (action.id == "org.debian.pcsc-lite.access_pcsc" &&
                subject.isInGroup("wheel")) {
                return polkit.Result.YES;
        }
});
EOF

Alternative solutions

Additional resources