This is a guide to using [YubiKey](https://www.yubico.com/faq/yubikey/) as a [SmartCard](https://security.stackexchange.com/questions/38924/how-does-storing-gpg-ssh-private-keys-on-smart-cards-compare-to-plain-usb-drives) for storing GPG encryption, signing and authentication keys, which can be used for SSH. Keys stored on YubiKey are non-exportable (as opposed to file-based keys that are stored on disk) and are convenient for everyday use. Instead of having to remember and enter passphrases to unlock SSH/GPG keys, YubiKey needs only a physical touch after being unlocked with a PIN code. All signing and encryption operations happen on the card, rather than in OS memory. **New!** [Purse](https://github.com/drduh/Purse) is a password manager which can integrate with GPG on YubiKey. If you have a comment or suggestion, please open an [issue](https://github.com/drduh/YubiKey-Guide/issues) on GitHub. - [Purchase YubiKey](#purchase-yubikey) - [Live image](#live-image) - [Required software](#required-software) - [Entropy](#entropy) - [Creating keys](#creating-keys) - [Master key](#master-key) - [Sub-keys](#sub-keys) - [Signing](#signing) - [Encryption](#encryption) - [Authentication](#authentication) - [Verify keys](#verify-keys) - [Export keys](#export-keys) - [Backup keys](#backup-keys) - [Configure YubiKey](#configure-yubikey) - [Configure Smartcard](#configure-smartcard) - [Change PIN](#change-pin) - [Set information](#set-information) - [Transfer keys](#transfer-keys) - [Signing](#signing-1) - [Encryption](#encryption-1) - [Authentication](#authentication-1) - [Verify card](#verify-card) - [Export public key](#export-public-key) - [Cleanup](#cleanup) - [Using keys](#using-keys) - [Import public key](#import-public-key) - [Trust master key](#trust-master-key) - [Insert YubiKey](#insert-yubikey) - [Encryption](#encryption-2) - [Decryption](#decryption) - [Signing](#signing-2) - [Verifying signature](#verifying-signature) - [SSH](#ssh) - [Create configuration](#create-configuration) - [Replace agents](#replace-agents) - [Copy public key](#copy-public-key) - [(Optional) Save public key for identity file configuration](#optional-save-public-key-for-identity-file-configuration) - [Connect with public key authentication](#connect-with-public-key-authentication) - [Touch to authenticate](#touch-to-authenticate) - [Import SSH keys](#import-ssh-keys) - [GitHub](#github) - [OpenBSD](#openbsd) - [Windows](#windows) - [Troubleshooting](#troubleshooting) - [Notes](#notes) - [Similar work](#similar-work) # Purchase YubiKey YubiKey 4 has support for **4096 bit** RSA keys in OTP+CCID mode, whereas NEO are [limited](https://www.yubico.com/products/yubikey-hardware/compare-yubikeys/) to **2048 bit** RSA keys. Consider purchasing a pair of keys and programming both in case of loss or damage to one of them. # Live image It is recommended to generate cryptographic keys and configure YubiKey from a secure environment. One way to do is by downloading and booting to a [Debian Live](https://www.debian.org/CD/live/) or [Tails](https://tails.boum.org/index.en.html) image loaded from a USB drive into memory. Download the latest image and verify its integrity: ``` $ curl -LfO https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/debian-live-9.6.0-amd64-xfce.iso $ curl -LfO https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/SHA512SUMS $ !!.sign $ gpg --verify SHA512SUMS.sign SHA512SUMS [...] gpg: Good signature from "Debian CD signing key " [unknown] [...] $ grep $(sha512sum debian-live-9.6.0-amd64-xfce.iso) SHA512SUMS e35dd65fe1b078f71fcf04fa749a05bfefe4aa11a9e80f116ceec0566d65636a4ac84a9aff22aa3f7a8eeb10289d0c2f54dfe7c599d8aa16663e4f9a74f3eec5 debian-live-9.6.0-amd64-xfce.iso ``` Mount a USB drive and copy the image over to it: ``` $ sudo dd if=debian-live-9.6.0-amd64-xfce.iso of=/dev/sdc bs=4M $ sync ``` Shut down the computer and disconnect hard drives and any unnecessary peripherals. Plug in the USB drive and boot to the live image. Configure networking to continue. # Required software ``` $ sudo apt-get update $ sudo apt-get install -y \ curl gnupg2 gnupg-agent \ cryptsetup scdaemon pcscd \ yubikey-personalization \ dirmngr \ secure-delete ``` You may also need more recent versions of [yubikey-personalization](https://developers.yubico.com/yubikey-personalization/Releases/) and [yubico-c](https://developers.yubico.com/yubico-c/Releases/). **macOS** Download and install [Homebrew](https://brew.sh/) and the following Brew packages - `gnupg yubikey-personalization hopenpgp-tools ykman pinentry-mac` **Windows** Download and install [Gpg4Win](https://www.gpg4win.org/) and [PuTTY](https://putty.org). ## Entropy Generating keys will require a lot of randomness. To check the available bits of entropy available on Linux: ``` $ cat /proc/sys/kernel/random/entropy_avail 849 ``` A hardware random number generator like [OneRNG](http://onerng.info/onerng/) will increase the speed of entropy generation and possibly its quality. To install and configure OneRNG: ``` $ sudo apt-get install -y rng-tools at python-gnupg openssl $ curl -LfO https://github.com/OneRNG/onerng.github.io/raw/master/sw/onerng_3.6-1_all.deb $ sha256sum onerng_3.6-1_all.deb a9ccf7b04ee317dbfc91518542301e2d60ebe205d38e80563f29aac7cd845ccb $ sudo dpkg -i onerng_3.6-1_all.deb $ echo "HRNGDEVICE=/dev/ttyACM0" | sudo tee /etc/default/rng-tools $ sudo service rng-tools restart ``` If the service fails to start, kick off `atd` and try again: ``` $ sudo atd ; sudo service rng-tools restart ``` Plug in the OneRNG and empty `/dev/random` - the light on the device should dim briefly. Verify the available entropy pool is re-seeded. ``` $ cat /dev/random >/dev/null [Control-C] $ cat /proc/sys/kernel/random/entropy_avail 3049 ``` # Creating keys Create a temporary directory which won't survive a [reboot](https://serverfault.com/questions/377348/when-does-tmp-get-cleared): ``` $ export GNUPGHOME=$(mktemp -d) ; echo $GNUPGHOME /tmp/tmp.aaiTTovYgo ``` Create a hardened configuration for GPG with the following options or by downloading my [recommended](https://github.com/drduh/config/blob/master/gpg.conf) version directly: ``` $ curl -Lfo $GNUPGHOME/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf $ cat $GNUPGHOME/gpg.conf personal-cipher-preferences AES256 AES192 AES CAST5 personal-digest-preferences SHA512 SHA384 SHA256 SHA224 default-preference-list SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed cert-digest-algo SHA512 s2k-digest-algo SHA512 s2k-cipher-algo AES256 charset utf-8 fixed-list-mode no-comments no-emit-version keyid-format 0xlong list-options show-uid-validity verify-options show-uid-validity with-fingerprint require-cross-certification use-agent ``` Disable networking for the remainder of the setup. # Master key The first key to generate is the master key. It will be used for certification only - to issue sub-keys that are used for encryption, signing and authentication. This master key should be kept offline at all times. You'll be prompted to enter and verify a passphrase - keep it handy as you'll need it throughout. To generate a strong passphrase which could be written down in a hidden or secure place; or memorized: ``` $ gpg --gen-random -a 0 24 ydOmByxmDe63u7gqx2XI9eDgpvJwibNH ``` Generate a new key with GPG, selecting `(4) RSA (sign only)` and `4096` bit keysize - do not set the key to expire (see Note #3). ``` $ gpg --full-generate-key Please select what kind of key you want: (1) RSA and RSA (default) (2) DSA and Elgamal (3) DSA (sign only) (4) RSA (sign only) Your selection? 4 RSA keys may be between 1024 and 4096 bits long. What keysize do you want? (2048) 4096 Requested keysize is 4096 bits Please specify how long the key should be valid. 0 = key does not expire = key expires in n days w = key expires in n weeks m = key expires in n months y = key expires in n years Key is valid for? (0) 0 Key does not expire at all Is this correct? (y/N) y GnuPG needs to construct a user ID to identify your key. Real name: Dr Duh Email address: doc@duh.to Comment: You selected this USER-ID: "Dr Duh " Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? o We need to generate a lot of random bytes. It is a good idea to perform some other action (type on the keyboard, move the mouse, utilize the disks) during the prime generation; this gives the random number generator a better chance to gain enough entropy. gpg: /tmp.FLZC0xcM/trustdb.gpg: trustdb created gpg: key 0xFF3E7D88647EBCDB marked as ultimately trusted gpg: directory '/tmp.FLZC0xcM/openpgp-revocs.d' created gpg: revocation certificate stored as '/tmp.FLZC0xcM/openpgp-revocs.d/011CE16BD45B27A55BA8776DFF3E7D88647EBCDB.rev' public and secret key created and signed. Note that this key cannot be used for encryption. You may want to use the command "--edit-key" to generate a subkey for this purpose. pub rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [SC] Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB uid Dr Duh ``` Note that as of GPG [version 2.1](https://www.gnupg.org/faq/whats-new-in-2.1.html#autorev) a revocation certificate is automatically generated. Export the key ID as a [variable](https://stackoverflow.com/questions/1158091/defining-a-variable-with-or-without-export/1158231#1158231) for use later: ``` $ export KEYID=0xFF3E7D88647EBCDB ``` # Sub-keys Edit the Master key to add sub-keys: ``` $ gpg --expert --edit-key $KEYID Secret key is available. sec rsa4096/0xEA5DE91459B80592 created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate [ultimate] (1). Dr Duh ``` Use 4096-bit keysize on YubiKey 4 and 2048-bit on NEO. Use a 1 year expiration - it can always be renewed using the previous offline Master key. ## Signing Create a [signing key](https://stackoverflow.com/questions/5421107/can-rsa-be-both-used-as-encryption-and-signature/5432623#5432623) by selecting `(4) RSA (sign only)`: ``` gpg> addkey Key is protected. You need a passphrase to unlock the secret key for user: "Dr Duh " 4096-bit RSA key, ID 0xFF3E7D88647EBCDB, created 2016-05-24 Please select what kind of key you want: (3) DSA (sign only) (4) RSA (sign only) (5) Elgamal (encrypt only) (6) RSA (encrypt only) (7) DSA (set your own capabilities) (8) RSA (set your own capabilities) Your selection? 4 RSA keys may be between 1024 and 4096 bits long. What keysize do you want? (2048) 4096 Requested keysize is 4096 bits Please specify how long the key should be valid. 0 = key does not expire = key expires in n days w = key expires in n weeks m = key expires in n months y = key expires in n years Key is valid for? (0) 1y Key expires at Mon 10 Sep 2018 00:00:00 PM UTC Is this correct? (y/N) y Really create? (y/N) y We need to generate a lot of random bytes. It is a good idea to perform some other action (type on the keyboard, move the mouse, utilize the disks) during the prime generation; this gives the random number generator a better chance to gain enough entropy. sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S [ultimate] (1). Dr Duh ``` ## Encryption Next, create an [encryption key](https://www.cs.cornell.edu/courses/cs5430/2015sp/notes/rsa_sign_vs_dec.php) by selecting `(6) RSA (encrypt only)`: ``` gpg> addkey Please select what kind of key you want: (3) DSA (sign only) (4) RSA (sign only) (5) Elgamal (encrypt only) (6) RSA (encrypt only) (7) DSA (set your own capabilities) (8) RSA (set your own capabilities) (10) ECC (sign only) (11) ECC (set your own capabilities) (12) ECC (encrypt only) (13) Existing key Your selection? 6 RSA keys may be between 1024 and 4096 bits long. What keysize do you want? (2048) 4096 Requested keysize is 4096 bits Please specify how long the key should be valid. 0 = key does not expire = key expires in n days w = key expires in n weeks m = key expires in n months y = key expires in n years Key is valid for? (0) 1y Key expires at Mon 10 Sep 2018 00:00:00 PM UTC Is this correct? (y/N) y Really create? (y/N) y We need to generate a lot of random bytes. It is a good idea to perform some other action (type on the keyboard, move the mouse, utilize the disks) during the prime generation; this gives the random number generator a better chance to gain enough entropy. sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E [ultimate] (1). Dr Duh ``` ## Authentication Finally, create an [authentication key](https://superuser.com/questions/390265/what-is-a-gpg-with-authenticate-capability-used-for). GPG doesn't provide an authenticate-only key type, so select `(8) RSA (set your own capabilities)` and toggle the required capabilities until the only allowed action is `Authenticate`: ``` gpg> addkey Please select what kind of key you want: (3) DSA (sign only) (4) RSA (sign only) (5) Elgamal (encrypt only) (6) RSA (encrypt only) (7) DSA (set your own capabilities) (8) RSA (set your own capabilities) (10) ECC (sign only) (11) ECC (set your own capabilities) (12) ECC (encrypt only) (13) Existing key Your selection? 8 Possible actions for a RSA key: Sign Encrypt Authenticate Current allowed actions: Sign Encrypt (S) Toggle the sign capability (E) Toggle the encrypt capability (A) Toggle the authenticate capability (Q) Finished Your selection? S Possible actions for a RSA key: Sign Encrypt Authenticate Current allowed actions: Encrypt (S) Toggle the sign capability (E) Toggle the encrypt capability (A) Toggle the authenticate capability (Q) Finished Your selection? E Possible actions for a RSA key: Sign Encrypt Authenticate Current allowed actions: (S) Toggle the sign capability (E) Toggle the encrypt capability (A) Toggle the authenticate capability (Q) Finished Your selection? A Possible actions for a RSA key: Sign Encrypt Authenticate Current allowed actions: Authenticate (S) Toggle the sign capability (E) Toggle the encrypt capability (A) Toggle the authenticate capability (Q) Finished Your selection? q RSA keys may be between 1024 and 4096 bits long. What keysize do you want? (2048) 4096 Requested keysize is 4096 bits Please specify how long the key should be valid. 0 = key does not expire = key expires in n days w = key expires in n weeks m = key expires in n months y = key expires in n years Key is valid for? (0) 1y Key expires at Mon 10 Sep 2018 00:00:00 PM UTC Is this correct? (y/N) y Really create? (y/N) y We need to generate a lot of random bytes. It is a good idea to perform some other action (type on the keyboard, move the mouse, utilize the disks) during the prime generation; this gives the random number generator a better chance to gain enough entropy. sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E ssb rsa4096/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ultimate] (1). Dr Duh gpg> save ``` # Verify keys List the generated secret keys and verify the output: ``` $ gpg --list-secret-keys /tmp.FLZC0xcM/pubring.kbx ------------------------------------------------------------------------- sec rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [SC] Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB uid Dr Duh ssb rsa4096/0xBECFA3C1AE191D15 2017-10-09 [S] [expires: 2018-10-09] ssb rsa4096/0x5912A795E90DD2CF 2017-10-09 [E] [expires: 2018-10-09] ssb rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09] ``` To verify with OpenPGP key checks, use the automated [key best practice checker](https://riseup.net/en/security/message-security/openpgp/best-practices#openpgp-key-checks): ``` $ sudo apt-get install hopenpgp-tools $ gpg --export $KEYID | hokey lint ``` The output will display any problems with your key in red text. If everything is green, your key passes each of the tests. If it is red, your key has failed one of the tests. > hokey may warn (orange text) about cross certification for the authentication key. GPG's [Signing Subkey Cross-Certification](https://gnupg.org/faq/subkey-cross-certify.html) documentation has more detail on cross certification, and gpg v2.2.1 notes "subkey does not sign and so does not need to be cross-certified". # Export keys The Master and sub-keys will be encrypted with your passphrase when exported. Save a copy of your keys: ``` $ gpg --armor --export-secret-keys $KEYID > $GNUPGHOME/mastersub.key $ gpg --armor --export-secret-subkeys $KEYID > $GNUPGHOME/sub.key ``` On Windows, note that using any extension other than `.gpg` or attempting IO redirection to a file will garble the secret key, making it impossible to import it again at a later date: ``` $ gpg --armor --export-secret-keys $KEYID -o \path\to\dir\mastersub.gpg $ gpg --armor --export-secret-subkeys $KEYID -o \path\to\dir\sub.gpg ``` # Backup keys Once keys are moved to hardware, they cannot be extracted again, so make sure you have made an **encrypted** backup before proceeding. An encrypted USB drive or container can be made using [VeraCrypt](https://www.veracrypt.fr/en/Downloads.html). Also consider using a [paper copy](http://www.jabberwocky.com/software/paperkey/) of the keys as an additional backup measure. To format and encrypt a USB drive on Linux, first attach it and check its label: ``` $ sudo dmesg | tail scsi8 : usb-storage 2-1:1.0 usbcore: registered new interface driver usb-storage scsi 8:0:0:0: USB 0: 0 ANSI: 6 sd 8:0:0:0: Attached scsi generic sg4 type 0 sd 8:0:0:0: [sde] 62980096 512-byte logical blocks: (32.2 GB/30.0 GiB) sd 8:0:0:0: [sde] Write Protect is off sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00 sde: sde1 sd 8:0:0:0: [sde] Attached SCSI removable disk ``` Check the size to make sure it's the right drive: ``` $ sudo fdisk -l /dev/sde Disk /dev/sde: 30 GiB, 32245809152 bytes, 62980096 sectors /dev/sde1 2048 62980095 62978048 30G 6 FAT16 ``` Erase and create a new partition table: ``` $ sudo fdisk /dev/sde Welcome to fdisk (util-linux 2.25.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): o Created a new DOS disklabel with disk identifier 0xeac7ee35. Command (m for help): w The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks. ``` Remove and reinsert the USB drive, then create a new partition, selecting defaults: ``` $ sudo fdisk /dev/sde Welcome to fdisk (util-linux 2.25.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): n Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-62980095, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-62980095, default 62980095): Created a new partition 1 of type 'Linux' and of size 30 GiB. Command (m for help): w The partition table has been altered. Calling ioctl() to re-read partition table. Syncing disks. ``` Use [LUKS](https://askubuntu.com/questions/97196/how-secure-is-an-encrypted-luks-filesystem) to encrypt the new partition: ``` $ sudo cryptsetup luksFormat /dev/sde1 WARNING! ======== This will overwrite data on /dev/sde1 irrevocably. Are you sure? (Type uppercase yes): YES Enter passphrase: Verify passphrase: ``` Mount the partition: ``` $ sudo cryptsetup luksOpen /dev/sde1 usb Enter passphrase for /dev/sde1: ``` Create a filesystem: ``` $ sudo mkfs.ext4 /dev/mapper/usb -L usb mke2fs 1.43.4 (31-Jan-2017) Creating filesystem with 7871744 4k blocks and 1970416 inodes Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done ``` Mount the filesystem: ``` $ sudo mount /dev/mapper/usb /mnt ``` Backup all GPG files to it: ``` $ sudo cp -avi $GNUPGHOME /mnt [...] ‘/tmp/tmp.aaiTTovYgo/revoke.txt’ -> ‘/mnt/tmp.aaiTTovYgo/revoke.txt’ ‘/tmp/tmp.aaiTTovYgo/gpg.conf’ -> ‘/mnt/tmp.aaiTTovYgo/gpg.conf’ ‘/tmp/tmp.aaiTTovYgo/master.key’ -> ‘/mnt/tmp.aaiTTovYgo/master.key’ ‘/tmp/tmp.aaiTTovYgo/secring.gpg’ -> ‘/mnt/tmp.aaiTTovYgo/secring.gpg’ ‘/tmp/tmp.aaiTTovYgo/mastersub.key’ -> ‘/mnt/tmp.aaiTTovYgo/mastersub.key’ ‘/tmp/tmp.aaiTTovYgo/sub.key’ -> ‘/mnt/tmp.aaiTTovYgo/sub.key’ ‘/tmp/tmp.aaiTTovYgo/pubring.gpg’ -> ‘/mnt/tmp.aaiTTovYgo/pubring.gpg’ [...] ``` Keep the backup mounted if you plan on setting up two or more keys as `keytocard` will [delete](https://lists.gnupg.org/pipermail/gnupg-users/2016-July/056353.html) the local copy on save. Otherwise, unmount and disconnected the encrypted USB drive: ``` $ sudo umount /mnt $ sudo cryptsetup luksClose usb ``` # Configure YubiKey Plug in YubiKey and configure it with the `ykpersonalize` utility: ``` $ sudo ykpersonalize -m82 Firmware version 4.3.7 Touch level 527 Program sequence 1 The USB mode will be set to: 0x82 Commit? (y/n) [n]: y ``` The -m option is the mode command. To see the different modes, enter `ykpersonalize –help`. Mode 82 (in hex) enables the YubiKey NEO as a composite USB device (HID + CCID). Once you have changed the mode, you need to re-boot the YubiKey – so remove and re-insert it. On YubiKey NEO with firmware version 3.3 or higher, you can enable composite USB device with `-m86` instead of `-m82`. **Note** YubiKey NEO shipped after November 2015 have [all modes enabled](https://www.yubico.com/support/knowledge-base/categories/articles/yubikey-neo-manager/); so this configuration may be skipped. Older versions of the YubiKey NEO may need to be reconfigured as a composite USB device (HID + CCID) which allows OTPs to be emitted while in use as a SmartCard. **Windows** Use the [YubiKey NEO Manager](https://www.yubico.com/products/services-software/download/yubikey-neo-manager/) to enable CCID functionality. # Configure Smartcard Use GPG to configure YubiKey as a smartcard: ``` $ gpg --card-edit Reader ...........: Yubico Yubikey 4 OTP U2F CCID Application ID ...: D2760001240102010006055532110000 Version ..........: 2.1 Manufacturer .....: Yubico Serial number ....: 05553211 Name of cardholder: [not set] Language prefs ...: [not set] Sex ..............: unspecified URL of public key : [not set] Login data .......: [not set] Signature PIN ....: not forced Key attributes ...: rsa2048 rsa2048 rsa2048 Max. PIN lengths .: 127 127 127 PIN retry counter : 3 0 3 Signature counter : 0 Signature key ....: [none] Encryption key....: [none] Authentication key: [none] General key info..: [none] ``` ## Change PIN The default PIN codes are `12345678` for the Admin PIN (aka PUK) and `123456` for the PIN. The CCID-mode PINs can be up to 127 ASCII characters long. The Admin PIN is required for some card operations and to unblock a PIN that has been entered incorrectly more than three times. See the GnuPG documentation on [Managing PINs](https://www.gnupg.org/howtos/card-howto/en/ch03s02.html) for details. ``` gpg/card> admin Admin commands are allowed gpg/card> passwd gpg: OpenPGP card no. D2760001240102010006055532110000 detected 1 - change PIN 2 - unblock PIN 3 - change Admin PIN 4 - set the Reset Code Q - quit Your selection? 3 PIN changed. 1 - change PIN 2 - unblock PIN 3 - change Admin PIN 4 - set the Reset Code Q - quit Your selection? 1 PIN changed. 1 - change PIN 2 - unblock PIN 3 - change Admin PIN 4 - set the Reset Code Q - quit Your selection? q ``` ## Set information Some fields are optional. ``` gpg/card> name Cardholder's surname: Duh Cardholder's given name: Dr gpg/card> lang Language preferences: en gpg/card> login Login data (account name): doc@duh.to gpg/card> [Press Enter] Application ID ...: D2760001240102010006055532110000 Version ..........: 2.1 Manufacturer .....: unknown Serial number ....: 05553211 Name of cardholder: Dr Duh Language prefs ...: en Sex ..............: unspecified URL of public key : [not set] Login data .......: doc@duh.to Private DO 4 .....: [not set] Signature PIN ....: not forced Key attributes ...: 2048R 2048R 2048R Max. PIN lengths .: 127 127 127 PIN retry counter : 3 0 3 Signature counter : 0 Signature key ....: [none] Encryption key....: [none] Authentication key: [none] General key info..: [none] gpg/card> quit ``` # Transfer keys Transferring keys to YubiKey using `keytocard` is a one-way operation only, so make sure you've made a backup before proceeding. Previous GPG versions required the `toggle` command before selecting keys. The currently selected key(s) are indicated with an `*`. When moving keys only one key should be selected at a time. ``` $ gpg --edit-key $KEYID Secret key is available. sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E ssb rsa4096/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ultimate] (1). Dr Duh ``` ## Signing Select and move the signature key. You will be prompted for the key passphrase and admin PIN). ``` gpg> key 1 sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb* rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E ssb rsa4096/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ultimate] (1). Dr Duh gpg> keytocard Please select where to store the key: (1) Signature key (3) Authentication key Your selection? 1 You need a passphrase to unlock the secret key for user: "Dr Duh " 4096-bit RSA key, ID 0xBECFA3C1AE191D15, created 2016-05-24 ``` ## Encryption Type `key 1` again to de-select and `key 2` to select the next key: ``` gpg> key 1 gpg> key 2 sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb* rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E ssb rsa4096/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ultimate] (1). Dr Duh gpg> keytocard Please select where to store the key: (2) Encryption key Your selection? 2 [...] ``` ## Authentication Type `key 2` again to deselect and `key 3` to select the last key: ``` gpg> key 2 gpg> key 3 sec rsa4096/0xFF3E7D88647EBCDB created: 2017-10-09 expires: never usage: SC trust: ultimate validity: ultimate ssb rsa4096/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S ssb rsa4096/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E ssb* rsa4096/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ultimate] (1). Dr Duh gpg> keytocard Please select where to store the key: (3) Authentication key Your selection? 3 gpg> save ``` # Verify card Verify the sub-keys have moved to YubiKey as indicated by `ssb>`: ``` $ gpg --list-secret-keys /tmp.FLZC0xcM/pubring.kbx ------------------------------------------------------------------------- sec rsa4096/0xFF3E7D88647EBCDB 2017-10-09 [SC] Key fingerprint = 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB uid Dr Duh ssb> rsa4096/0xBECFA3C1AE191D15 2017-10-09 [S] [expires: 2018-10-09] ssb> rsa4096/0x5912A795E90DD2CF 2017-10-09 [E] [expires: 2018-10-09] ssb> rsa4096/0x3F29127E79649A3D 2017-10-09 [A] [expires: 2018-10-09] ``` # Export public key Mount another USB drive to copy the *public* key, or save it somewhere where you can easily access later. **Note** Without the *public* key, you will not be able to use GPG to encrypt, decrypt, nor sign messages. However, you will still be able to use the YubiKey for SSH. ``` $ gpg --armor --export $KEYID > /mnt/public-usb-key/pubkey.txt ``` On Windows: ``` $ gpg --armor --export $KEYID -o \path\to\dir\pubkey.gpg ``` Optionally, the public key may be uploaded to a [public keyserver](https://debian-administration.org/article/451/Submitting_your_GPG_key_to_a_keyserver): ``` $ gpg --send-key $KEYID gpg: sending key 0xFF3E7D88647EBCDB to hkps server hkps.pool.sks-keyservers.net [...] ``` After some time, the public key will to propagate to [other](https://pgp.key-server.io/pks/lookup?search=doc%40duh.to&fingerprint=on&op=vindex) [servers](https://pgp.mit.edu/pks/lookup?search=doc%40duh.to&op=index). # Cleanup Ensure you have: * Saved the password to the Master key. * Saved a copy of the Master key, subkeys and revocation certificates on encrypted offline storage. * Saved the password to that encrypted volume in a separate location. * Saved a copy of the public key somewhere easily accessible later. * Moved the Encryption, Signing and Authentication subkeys to YubiKey. Then reboot or [securely delete](http://srm.sourceforge.net/) `$GNUPGHOME` and remove the secret keys from the GPG keyring: ``` $ sudo srm -r $GNUPGHOME || sudo rm -rf $GNUPGHOME $ gpg --delete-secret-key $KEYID ``` Make sure you have securely erased keys, including revocation certificates, if a Live image was not used! # Using keys You can reboot back into the Live image to test YubiKey. Install required programs: ``` $ sudo apt-get update $ sudo apt-get install -y \ curl gnupg2 gnupg-agent \ cryptsetup scdaemon pcscd ``` Create a hardened configuration for GPG with the following options or by downloading my [recommended](https://github.com/drduh/config/blob/master/gpg.conf) version directly: ``` $ mkdir ~/.gnupg ; curl -Lfo ~/.gnupg/gpg.conf https://raw.githubusercontent.com/drduh/config/master/gpg.conf $ cat ~/.gnupg/gpg.conf personal-cipher-preferences AES256 AES192 AES CAST5 personal-digest-preferences SHA512 SHA384 SHA256 SHA224 default-preference-list SHA512 SHA384 SHA256 SHA224 AES256 AES192 AES CAST5 ZLIB BZIP2 ZIP Uncompressed cert-digest-algo SHA512 s2k-digest-algo SHA512 s2k-cipher-algo AES256 charset utf-8 fixed-list-mode no-comments no-emit-version keyid-format 0xlong list-options show-uid-validity verify-options show-uid-validity with-fingerprint require-cross-certification use-agent $ chmod 600 ~/.gnupg/gpg.conf ``` # Import public key To import the public key from a file on an encrypted USB drive: ``` $ sudo cryptsetup luksOpen /dev/sdd1 usb Enter passphrase for /dev/sdd1: $ sudo mount /dev/mapper/usb /mnt $ gpg --import /mnt/pubkey.txt gpg: key 0xFF3E7D88647EBCDB: public key "Dr Duh " imported gpg: Total number processed: 1 gpg: imported: 1 ``` To download the public key from a keyserver: ``` $ gpg --recv 0xFF3E7D88647EBCDB gpg: requesting key 0xFF3E7D88647EBCDB from hkps server hkps.pool.sks-keyservers.net [...] gpg: key 0xFF3E7D88647EBCDB: public key "Dr Duh " imported gpg: Total number processed: 1 gpg: imported: 1 ``` If you get the error `gpgkeys: HTTP fetch error 1: unsupported protocol` - this means you need to install a special version of curl which supports GPG: ``` $ sudo apt-get install -y gnupg-curl ``` ## Trust master key Edit the Master key to assign it ultimate trust by selecting `trust` then option `5`: ``` $ gpg --edit-key 0xFF3E7D88647EBCDB Secret key is available. gpg> trust pub 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never usage: SC trust: unknown validity: unknown sub 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S sub 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E sub 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ unknown] (1). Dr Duh Please decide how far you trust this user to correctly verify other users' keys (by looking at passports, checking fingerprints from different sources, etc.) 1 = I don't know or won't say 2 = I do NOT trust 3 = I trust marginally 4 = I trust fully 5 = I trust ultimately m = back to the main menu Your decision? 5 Do you really want to set this key to ultimate trust? (y/N) y pub 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never usage: SC trust: ultimate validity: unknown sub 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 usage: S sub 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 usage: E sub 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 usage: A [ unknown] (1). Dr Duh gpg> save ``` # Insert YubiKey Re-connect Yubikey and check the status: ``` $ gpg --card-status Application ID ...: D2760001240102010006055532110000 Version ..........: 2.1 Manufacturer .....: Yubico Serial number ....: 05553211 Name of cardholder: Dr Duh Language prefs ...: en Sex ..............: unspecified URL of public key : [not set] Login data .......: doc@duh.to Signature PIN ....: not forced Key attributes ...: 4096R 4096R 4096R Max. PIN lengths .: 127 127 127 PIN retry counter : 3 3 3 Signature counter : 0 Signature key ....: 07AA 7735 E502 C5EB E09E B8B0 BECF A3C1 AE19 1D15 created ....: 2016-05-24 23:22:01 Encryption key....: 6F26 6F46 845B BEB8 BDF3 7E9B 5912 A795 E90D D2CF created ....: 2016-05-24 23:29:03 Authentication key: 82BE 7837 6A3F 2E7B E556 5E35 3F29 127E 7964 9A3D created ....: 2016-05-24 23:36:40 General key info..: pub 4096R/0xBECFA3C1AE191D15 2016-05-24 Dr Duh sec# 4096R/0xFF3E7D88647EBCDB created: 2016-05-24 expires: never ssb> 4096R/0xBECFA3C1AE191D15 created: 2017-10-09 expires: 2018-10-09 card-no: 0006 05553211 ssb> 4096R/0x5912A795E90DD2CF created: 2017-10-09 expires: 2018-10-09 card-no: 0006 05553211 ssb> 4096R/0x3F29127E79649A3D created: 2017-10-09 expires: 2018-10-09 card-no: 0006 05553211 ``` `sec#` indicates master key is not available (as it should be stored encrypted offline). **Note** If you see `General key info..: [none]` in the output instead - go back and import the public key using the previous step. # Encryption ``` $ echo "test message string" | gpg --encrypt --armor --recipient 0xFF3E7D88647EBCDB -----BEGIN PGP MESSAGE----- hQIMA1kSp5XpDdLPAQ/+JyYfLaUS/+llEzQaKDb5mWhG4HlUgD99dNJUXakm085h PSSt3I8Ac0ctwyMnenZvBEbHMqdRnfZJsj5pHidKcAZrhgs+he+B1tdZ/KPa8inx NIGqd8W1OraVSFmPEdC1kQ5he6R/WCDH1NNel9+fvLtQDCBQaFae/s3yXCSSQU6q HKCJLyHK8K9hDvgFmXOY8j1qTknBvDbmYdcCKVE1ejgpUCi3WatusobpWozsp0+b 6DN8bXyfxLPYm1PTLfW7v4kwddktB8eVioV8A45lndJZvliSqDwxhrwyE5VGsArS NmqzBkCaOHQFr0ofL91xgwpCI5kM2ukIR5SxUO4hvzlHn58QVL9GfAyCHMFtJs3o Q9eiR0joo9TjTwR8XomVhRJShrrcPeGgu3YmIak4u7OndyBFpu2E79RQ0ehpl2gY tSECB6mNd/gt0Wy3y15ccaFI4CVP6jrMN6q3YhXqNC7GgI/OWkVZIAgUFYnbmIQe tQ3z3wlbvFFngeFy5IlhsPduK8T9XgPnOtgQxHaepKz0h3m2lJegmp4YZ4CbS9h6 kcBTUjys5Vin1SLuqL4PhErzmlAZgVzG2PANsnHYPe2hwN4NlFtOND1wgBCtBFBs 1pqz1I0O+jmyId+jVlAK076c2AwdkVbokKUcIT/OcTc0nwHjOUttJGmkUHlbt/nS iAFNniSfzf6fwAFHgsvWiRJMa3keolPiqoUdh0tBIiI1zxOMaiTL7C9BFdpnvzYw Krj0pDc7AlF4spWhm58WgAW20P8PGcVQcN6mSTG8jKbXVSP3bvgPXkpGAOLKMV/i pLORcRPbauusBqovgaBWU/i3pMYrbhZ+LQbVEaJlvblWu6xe8HhS/jo= =pzkv -----END PGP MESSAGE----- ``` # Decryption ``` $ gpg --decrypt --armor -----BEGIN PGP MESSAGE----- hQIMA1kSp5XpDdLPAQ/+JyYfLaUS/+llEzQaKDb5mWhG4HlUgD99dNJUXakm085h PSSt3I8Ac0ctwyMnenZvBEbHMqdRnfZJsj5pHidKcAZrhgs+he+B1tdZ/KPa8inx NIGqd8W1OraVSFmPEdC1kQ5he6R/WCDH1NNel9+fvLtQDCBQaFae/s3yXCSSQU6q HKCJLyHK8K9hDvgFmXOY8j1qTknBvDbmYdcCKVE1ejgpUCi3WatusobpWozsp0+b 6DN8bXyfxLPYm1PTLfW7v4kwddktB8eVioV8A45lndJZvliSqDwxhrwyE5VGsArS NmqzBkCaOHQFr0ofL91xgwpCI5kM2ukIR5SxUO4hvzlHn58QVL9GfAyCHMFtJs3o Q9eiR0joo9TjTwR8XomVhRJShrrcPeGgu3YmIak4u7OndyBFpu2E79RQ0ehpl2gY tSECB6mNd/gt0Wy3y15ccaFI4CVP6jrMN6q3YhXqNC7GgI/OWkVZIAgUFYnbmIQe tQ3z3wlbvFFngeFy5IlhsPduK8T9XgPnOtgQxHaepKz0h3m2lJegmp4YZ4CbS9h6 kcBTUjys5Vin1SLuqL4PhErzmlAZgVzG2PANsnHYPe2hwN4NlFtOND1wgBCtBFBs 1pqz1I0O+jmyId+jVlAK076c2AwdkVbokKUcIT/OcTc0nwHjOUttJGmkUHlbt/nS iAFNniSfzf6fwAFHgsvWiRJMa3keolPiqoUdh0tBIiI1zxOMaiTL7C9BFdpnvzYw Krj0pDc7AlF4spWhm58WgAW20P8PGcVQcN6mSTG8jKbXVSP3bvgPXkpGAOLKMV/i pLORcRPbauusBqovgaBWU/i3pMYrbhZ+LQbVEaJlvblWu6xe8HhS/jo= =pzkv -----END PGP MESSAGE----- gpg: encrypted with 4096-bit RSA key, ID 0x5912A795E90DD2CF, created 2016-05-24 "Dr Duh " [Press Control-D] test message string ``` # Signing ``` $ echo "test message string" | gpg --armor --clearsign --default-key 0xBECFA3C1AE191D15 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 test message string -----BEGIN PGP SIGNATURE----- iQIcBAEBCgAGBQJXRPo8AAoJEL7Po8GuGR0Vh8wP/jYXTR8SAZIZSMVCOyAjH37f k6JxB0rF928WDYPihjo/d0Jd+XpoV1g+oipDRjP78xqR9H/CJZlE10IPQbNaomFs +3RGxA3Zr085cVFoixI8rxYOSu0Vs2cAzAbJHNcOcD7vXxTHcX4T8kfKoF9A4U1u XTJ42eEjpO0fX76tFX2/Uzxl43ES0dO7Y82ho7xcnaYwakVUEcWfUpfDAroLKZOs wCZGr8Z64QDQzxQ9L45Zc61wMx9JEIWD4BnagllfeOYrEwTJfYG8uhDDNYx0jjJp j1PBHn5d556aX6DHUH05kq3wszvQ4W40RctLgAA3l1VnEKebhBKjLZA/EePAvQV4 QM7MFUV1X/pi2zlyoZSnHkVl8b5Q7RU5ZtRpq9fdkDDepeiUo5PNBUMJER1gn4bm ri8DtavkwTNWBRLnVR2gHBmVQNN7ZDOkHcfyqR4I9chx6TMpfcxk0zATAHh8Donp FVPKySifuXpunn+0MwdZl5XkhHGdpdYQz4/LAZUGhrA9JTnFtc4cl4JrTzufF8Sr c3JJumMsyGvw9OQKQHF8gHme4PBu/4P31LpfX9wzPOTpJaI31Sg5kdJLTo9M9Ppo uvkmJS7ETjLQZOsRyAEn7gcEKZQGPQcNAgfEgQPoepS/KvvI68u+JMJm4n24k2kQ fEkp501u8kAZkWauhiL+ =+ylJ -----END PGP SIGNATURE----- ``` # Verifying signature ``` $ gpg gpg: Go ahead and type your message ... -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 test message string -----BEGIN PGP SIGNATURE----- iQIcBAEBCgAGBQJXRPo8AAoJEL7Po8GuGR0Vh8wP/jYXTR8SAZIZSMVCOyAjH37f +3RGxA3Zr085cVFoixI8rxYOSu0Vs2cAzAbJHNcOcD7vXxTHcX4T8kfKoF9A4U1u XTJ42eEjpO0fX76tFX2/Uzxl43ES0dO7Y82ho7xcnaYwakVUEcWfUpfDAroLKZOs wCZGr8Z64QDQzxQ9L45Zc61wMx9JEIWD4BnagllfeOYrEwTJfYG8uhDDNYx0jjJp j1PBHn5d556aX6DHUH05kq3wszvQ4W40RctLgAA3l1VnEKebhBKjLZA/EePAvQV4 QM7MFUV1X/pi2zlyoZSnHkVl8b5Q7RU5ZtRpq9fdkDDepeiUo5PNBUMJER1gn4bm ri8DtavkwTNWBRLnVR2gHBmVQNN7ZDOkHcfyqR4I9chx6TMpfcxk0zATAHh8Donp FVPKySifuXpunn+0MwdZl5XkhHGdpdYQz4/LAZUGhrA9JTnFtc4cl4JrTzufF8Sr c3JJumMsyGvw9OQKQHF8gHme4PBu/4P31LpfX9wzPOTpJaI31Sg5kdJLTo9M9Ppo uvkmJS7ETjLQZOsRyAEn7gcEKZQGPQcNAgfEgQPoepS/KvvI68u+JMJm4n24k2kQ fEkp501u8kAZkWauhiL+ =+ylJ -----END PGP SIGNATURE----- [Press Control-D] gpg: Signature made Wed 25 May 2016 00:00:00 AM UTC gpg: using RSA key 0xBECFA3C1AE191D15 gpg: Good signature from "Dr Duh " [ultimate] Primary key fingerprint: 011C E16B D45B 27A5 5BA8 776D FF3E 7D88 647E BCDB Subkey fingerprint: 07AA 7735 E502 C5EB E09E B8B0 BECF A3C1 AE19 1D15 ``` # SSH [gpg-agent](https://wiki.archlinux.org/index.php/GnuPG#SSH_agent) supports the OpenSSH ssh-agent protocol (`enable-ssh-support`), as well as Putty's Pageant on Windows (`enable-putty-support`). This means it can be used instead of the traditional ssh-agent / pageant. There are some differences from ssh-agent, notably that gpg-agent does not _cache_ keys rather it converts, encrypts and stores them - persistently - as GPG keys and then makes them available to ssh clients. Any existing ssh private keys that you'd like to keep in `gpg-agent` should be deleted after they've been imported to the GPG agent. When importing the key to `gpg-agent`, you'll be prompted for a passphrase to protect that key within GPG's key store - you may want to use the same passphrase as the original's ssh version. GPG can both cache passphrases for a determined period (ref. `gpg-agent`'s various `cache-ttl` options), and since version 2.1 can store and fetch passphrases via the macOS keychain. Note than when removing the old private key after importing to `gpg-agent`, keep the `.pub` key file around for use in specifying ssh identities (e.g. `ssh -i /path/to/identity.pub`). Probably the biggest thing missing from `gpg-agent`'s ssh agent support is being able to remove keys. `ssh-add -d/-D` have no effect. Instead, you need to use the `gpg-connect-agent` utility to lookup a key's keygrip, match that with the desired ssh key fingerprint (as an MD5) and then delete that keygrip. The [gnupg-users mailing list](https://lists.gnupg.org/pipermail/gnupg-users/2016-August/056499.html) has more information. ## Create configuration Create a hardened configuration for gpg-agent with the following options or by downloading my [recommended](https://github.com/drduh/config/blob/master/gpg-agent.conf) version directly: ``` $ curl -Lfo ~/.gnupg/gpg-agent.conf https://raw.githubusercontent.com/drduh/config/master/gpg-agent.conf $ cat ~/.gnupg/gpg-agent.conf enable-ssh-support pinentry-program /usr/bin/pinentry-curses default-cache-ttl 60 max-cache-ttl 120 ``` Alternatively, you may want to use `/usr/bin/pinentry-gnome3` to use a GUI manager. On macOS, use `brew install pinentry-mac` and adjust the program path to suit. ## Replace agents To launch `gpg-agent` for use by SSH, use the `gpg-connect-agent /bye` or `gpgconf --launch gpg-agent` commands. Add these to your shell `rc` file: ``` export GPG_TTY="$(tty)" export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) gpgconf --launch gpg-agent ``` On some systems, you may need to use the following instead: ``` export GPG_TTY="$(tty)" export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh" gpg-connect-agent updatestartuptty /bye ``` ## Copy public key **Note** It is *not* necessary to import the corresponding GPG public key in order to use SSH. Copy and paste the output from `ssh-add` to the server's `authorized_keys` file: ``` $ ssh-add -L ssh-rsa AAAAB4NzaC1yc2EAAAADAQABAAACAz[...]zreOKM+HwpkHzcy9DQcVG2Nw== cardno:000605553211 ``` ## (Optional) Save public key for identity file configuration By default, SSH attempts to use all the identities available via the agent. It's often a good idea to manage exactly which keys SSH will use to connect to a server, for example to separate different roles or [to avoid being fingerprinted by untrusted ssh servers](https://blog.filippo.io/ssh-whoami-filippo-io/). To do this you'll need to use the command line argument `-l [identity_file]` or the `IdentityFile` and `IdentitiesOnly` options in `.ssh/config`. The argument provided to `IdentityFile` is traditionally the path to the _private_ key file (for example `IdentityFile ~/.ssh/id_rsa`). For the Yubikey - indeed, in general for keys stored in an ssh agent - `IdentityFile` should point to the _public_ key file, `ssh` will select the appropriate private key from those available via the ssh agent. To prevent `ssh` from trying all keys in the agent use the `IdentitiesOnly yes` option along with one or more `-i` or `IdentityFile` options for the target host. To reiterate, with `IdentitiesOnly yes`, `ssh` will not automatically enumerate public keys loaded into `ssh-agent` or `gpg-agent`. This means `publickey` authentication will not proceed unless explicitly named by `ssh -i [identity_file]` or in `.ssh/config` on a per-host basis. In the case of YubiKey usage, to extract the public key from the ssh agent: ``` $ ssh-add -L | grep "cardno:000605553211" > ~/.ssh/id_rsa_yubikey.pub ``` Then you can explicitly associate this Yubikey-stored key for used with a host, `github.com` for example, as follows: ``` $ cat << EOF >> ~/.ssh/config Host github.com IdentitiesOnly yes IdentityFile ~/.ssh/id_rsa_yubikey.pub EOF ``` ## Connect with public key authentication ``` $ ssh git@github.com -vvv [...] debug2: key: cardno:000605553211 (0x1234567890), debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: cardno:000605553211 debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 535 debug2: input_userauth_pk_ok: fp e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 debug3: sign_and_send_pubkey: RSA e5:de:a5:74:b1:3e:96:9b:85:46:e7:28:53:b4:82:c3 debug1: Authentication succeeded (publickey). [...] ``` **Note** To make multiple connections or securely transfer many files, consider using the [ControlMaster](https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) ssh option. Also see [drduh/config/ssh_config](https://github.com/drduh/config/blob/master/ssh_config). ## Touch to authenticate **Note** This is only possible on the Yubikey 4 line. By default, YubiKey will perform key operations without requiring a touch from the user. To require a touch for every SSH connection, use the [YubiKey Manager](https://developers.yubico.com/yubikey-manager/) and Admin PIN: ykman openpgp touch aut on To require a touch for the signing and encrypting keys as well: ykman openpgp touch sig on ykman openpgp touch enc on The YubiKey will blink when it's waiting for touch. ## Import SSH keys If there are existing SSH keys that you wish to make available via `gpg-agent`, you'll need to import them. You should then remove the original private keys. When importing the key, `gpg-agent` uses the key's filename as the key's label; this makes it easier to follow where the key originated from. In this example, we're starting with just the YubiKey's key in place and importing `~/.ssh/id_rsa`: ``` $ ssh-add -l 4096 SHA256:... cardno:00060123456 (RSA) $ ssh-add ~/.ssh/id_rsa && rm ~/.ssh/id_rsa ``` When invoking `ssh-add`, it will prompt for the ssh key's passphrase if present, then the `pinentry` program will prompt and confirm for a new passphrase to use to encrypt the converted key within the gpg key store. The migrated key should be listed in `ssh-add -l`: ``` $ ssh-add -l 4096 SHA256:... cardno:00060123456 (RSA) 2048 SHA256:... /Users/username/.ssh/id_rsa (RSA) ``` Or to show the keys with MD5 fingerprints, as used by `gpg-connect-agent`'s `KEYINFO` and `DELETE_KEY` commands: ``` $ ssh-add -E md5 -l 4096 MD5:... cardno:00060123456 (RSA) 2048 MD5:... /Users/username/.ssh/id_rsa (RSA) ``` When using the key `pinentry` will be invoked to request the key's passphrase. The passphrase will be cached for up to 10 minutes idle time between uses, to a maximum of 2 hours. ## GitHub You can use YubiKey to sign GitHub commits and tags. It can also be used for GitHub SSH authentication, allowing you to push, pull, and commit without a password. Log into GitHub and upload SSH and PGP public keys in Settings. To sign: > git config --global user.signingkey $KEYID Make sure your user.email option matches the email associated with your PGP identity. Now, to sign commits or tags simply use the `-S` option. GPG will automatically query your YubiKey and prompt you for your PIN. To authenticate: Run the following commands **(only for Windows)**: > git config --global core.sshcommand 'plink -agent' You can then change your repository url to: `git@github.com:USERNAME/repository`. Any authenticated commands will be authorized by your YubiKey. **Note** If you encounter the error `gpg: signing failed: No secret key` - run `gpg --card-status` with YubiKey plugged in and try the git command again. ## OpenBSD Install `pcsc-tools` and enable with `sudo rcctl enable pcscd`, then reboot in order to recognize YubiKey. ## Windows Begin by exporting the SSH key from GPG: ``` $ gpg --export-ssh-key $USERID ``` Copy this key to a file and keep it for later use. It represents the public SSH key corresponding to the secret key on your YubiKey. You can upload this key to any server you wish to SSH into. To authenticate SSH sessions via our YubiKey we need to enable Gpg4Win's PuTTY integration. Create a file named `gpg-agent.conf` and place it in the directory `C:\%APPDATA%\gnupg`. The file should contain the line `enable-putty-support`. Then, open a terminal and run the following commands: ``` > gpg-connect-agent killagent /bye > gpg-connect-agent /bye ``` Create a shortcut that points to `gpg-connect-agent /bye` and place it in your startup folder to make sure the agent starts after a system shutdown. Now you can use PuTTY for public key SSH authentication. When the server asks for public key verification, PuTTY will forward the request to GPG, which will prompt you for your PIN and authorize the login using your YubiKey. # Troubleshooting - If you don't understand some option - read `man gpg`. - If you encounter problems connecting to YubiKey with GPG - try unplugging and re-inserting your YubiKey, and restarting the `gpg-agent` process. - If you receive the error, `gpg: decryption failed: secret key not available` - you likely need to install GnuPG version 2.x. - If you receive the error, `Yubikey core error: no yubikey present` - make sure the YubiKey is inserted correctly. It should blink once when plugged in. - If you still receive the error, `Yubikey core error: no yubikey present` - you likely need to install newer versions of yubikey-personalize as outlined in [Install required software](#install-required-software). - If you receive the error, `Yubikey core error: write error` - YubiKey is likely locked. Install and run yubikey-personalization-gui to unlock it. - If you receive the error, `Key does not match the card's capability` - you likely need to use 2048 bit RSA key sizes. - If you receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - you probably have ssh-agent running. Make sure you replaced ssh-agent with gpg-agent as noted above. - If you still receive the error, `sign_and_send_pubkey: signing failed: agent refused operation` - On Debian, [try](https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=835394) `gpg-connect-agent updatestartuptty /bye` - If you receive the error, `Error connecting to agent: No such file or directory` from `ssh-add -L`, the UNIX file socket that the agent uses for communication with other processes may not be set up correctly. On Debian, try `export SSH_AUTH_SOCK="/run/user/$UID/gnupg/S.gpg-agent.ssh"` - If you receive the error, `Permission denied (publickey)`, increase ssh verbosity with the `-v` flag and ensure the public key from the card is being offered: `Offering public key: RSA SHA256:abcdefg... cardno:00060123456`. If it is, ensure you are connecting as the right user on the target system, rather than as the user on the local system. Otherwise, be sure `IdentitiesOnly` is not [enabled](https://github.com/FiloSottile/whosthere#how-do-i-stop-it) for this host. - If you totally screw up, you can [reset the card](https://developers.yubico.com/ykneo-openpgp/ResetApplet.html). # Notes 1. YubiKey has two configurations: one invoked with a short press, and the other with a long press. By default, the short-press mode is configured for HID OTP - a brief touch will emit an OTP string starting with `cccccccc`. If you rarely use the OTP mode, you can swap it to the second configuration via the Yubikey Personalization tool. If you *never* use OTP, you can disable it entirely using the [Yubikey Manager](https://developers.yubico.com/yubikey-manager) application (note, this not the similarly named Yubikey NEO Manager). 1. Programming YubiKey for GPG keys still lets you use its two configurations - [OTP](https://www.yubico.com/faq/what-is-a-one-time-password-otp/) and [static password](https://www.yubico.com/products/services-software/personalization-tools/static-password/) modes, for example. 1. Setting an expiry essentially forces you to manage your subkeys and announces to the rest of the world that you are doing so. Setting an expiry on a primary key is ineffective for protecting the key from loss - whoever has the primary key can simply extend its expiry period. Revocation certificates are [better suited](https://security.stackexchange.com/questions/14718/does-openpgp-key-expiration-add-to-security/79386#79386) for this purpose. It may be appropriate for your use case to set expiry dates on subkeys. # Similar work * https://developers.yubico.com/yubikey-personalization/ * https://developers.yubico.com/PGP/Card_edit.html * https://blog.josefsson.org/2014/06/23/offline-gnupg-master-key-and-subkeys-on-yubikey-neo-smartcard/ * https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/ * https://blog.habets.se/2013/02/GPG-and-SSH-with-Yubikey-NEO * https://trmm.net/Yubikey * https://rnorth.org/gpg-and-ssh-with-yubikey-for-mac * https://jclement.ca/articles/2015/gpg-smartcard/ * https://github.com/herlo/ssh-gpg-smartcard-config * http://www.bootc.net/archives/2013/06/09/my-perfect-gnupg-ssh-agent-setup/ * https://help.riseup.net/en/security/message-security/openpgp/best-practices * https://alexcabal.com/creating-the-perfect-gpg-keypair/ * https://www.void.gr/kargig/blog/2013/12/02/creating-a-new-gpg-key-with-subkeys/ * https://evilmartians.com/chronicles/stick-with-security-yubikey-ssh-gnupg-macos