arno/YubiKey-Guide
1
0
Fork 0
mirror of https://github.com/drduh/YubiKey-Guide.git synced 2024-11-25 16:58:38 +00:00
Code Issues Releases Wiki Activity

Formatting cleanup

Browse Source
This commit is contained in:
drduh 2019-12-30 15:36:11 -08:00
parent be7addad3c
commit 1b5a2fefd8
1 changed files with 19 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
README.md
View File

@ -10,7 +10,7 @@ If you have a comment or suggestion, please open an [Issue](https://github.com/d
- [Verify YubiKey](#verify-yubikey) - [Verify YubiKey](#verify-yubikey)
- [Download OS Image](#download-os-image) - [Download OS Image](#download-os-image)
- [Required software](#required-software) - [Required software](#required-software)
* [Debian/Ubuntu](#debianubuntu) * [Debian/Ubuntu](#debian-ubuntu)
* [Arch](#arch) * [Arch](#arch)
* [RHEL7](#rhel7) * [RHEL7](#rhel7)
* [OpenBSD](#openbsd) * [OpenBSD](#openbsd)
@ -782,7 +782,6 @@ sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) sd 7:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI removable disk sd 7:0:0:0: [sdb] Attached SCSI removable disk
``` ```
@ -797,7 +796,7 @@ Erase and create a new partition table:
```console ```console
$ sudo fdisk /dev/sdb $ sudo fdisk /dev/sdb
Welcome to fdisk (util-linux 2.29.2). Welcome to fdisk (util-linux 2.33.1).
Command (m for help): o Command (m for help): o
Created a new DOS disklabel with disk identifier 0xeac7ee35. Created a new DOS disklabel with disk identifier 0xeac7ee35.
@ -808,11 +807,11 @@ Calling ioctl() to re-read partition table.
Syncing disks. Syncing disks.
``` ```
Create a new partition with a 10 Megabyte size: Create a new partition with a 25 Megabyte size:
```console ```console
$ sudo fdisk /dev/sdb $ sudo fdisk /dev/sdb
Welcome to fdisk (util-linux 2.29.2). Welcome to fdisk (util-linux 2.33.1).
Command (m for help): n Command (m for help): n
Partition type Partition type
@ -823,7 +822,7 @@ Partition number (1-4, default 1):
First sector (2048-62980095, default 2048): First sector (2048-62980095, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-62980095, default 62980095): +25M Last sector, +sectors or +size{K,M,G,T,P} (2048-62980095, default 62980095): +25M
Created a new partition 1 of type 'Linux' and of size 10 MiB. Created a new partition 1 of type 'Linux' and of size 25 MiB.
Command (m for help): w Command (m for help): w
The partition table has been altered. The partition table has been altered.
@ -907,7 +906,7 @@ Partition number (2-4, default 2):
First sector (22528-31116287, default 22528): First sector (22528-31116287, default 22528):
Last sector, +sectors or +size{K,M,G,T,P} (22528-31116287, default 31116287): +25M Last sector, +sectors or +size{K,M,G,T,P} (22528-31116287, default 31116287): +25M
Created a new partition 2 of type 'Linux' and of size 10 MiB. Created a new partition 2 of type 'Linux' and of size 25 MiB.
Command (m for help): w Command (m for help): w
The partition table has been altered. The partition table has been altered.
@ -965,7 +964,7 @@ Print the existing partitions to make sure it's the right device:
$ doas disklabel -h sd2 $ doas disklabel -h sd2
``` ```
Initialize the disk by creating an `a` partition with FS type `RAID` and size of 10 Megabytes: Initialize the disk by creating an `a` partition with FS type `RAID` and size of 25 Megabytes:
```console ```console
$ doas fdisk -iy sd2 $ doas fdisk -iy sd2
@ -975,7 +974,7 @@ $ doas disklabel -E sd2
Label editor (enter '?' for help at any prompt) Label editor (enter '?' for help at any prompt)
sd2> a a sd2> a a
offset: [64] offset: [64]
size: [31101776] 10M size: [31101776] 25M
FS type: [4.2BSD] RAID FS type: [4.2BSD] RAID
sd2*> w sd2*> w
sd2> q sd2> q
@ -1008,10 +1007,6 @@ sd3> q
No label changes. No label changes.
$ doas newfs sd3i $ doas newfs sd3i
/dev/rsd3i: 7.8MB in 16000 sectors of 512 bytes
4 cylinder groups of 1.95MB, 125 blocks, 256 inodes each
super-block backups (for fsck -b #) at:
32, 4032, 8032, 12032,
``` ```
Mount the filesystem and copy the temporary directory with the keyring: Mount the filesystem and copy the temporary directory with the keyring:
@ -1045,17 +1040,13 @@ $ doas disklabel -E sd2
Label editor (enter '?' for help at any prompt) Label editor (enter '?' for help at any prompt)
sd2> a b sd2> a b
offset: [32130] offset: [32130]
size: [31069710] 10M size: [31069710] 25M
FS type: [swap] 4.2BSD FS type: [swap] 4.2BSD
sd2*> w sd2*> w
sd2> q sd2> q
No label changes. No label changes.
$ doas newfs sd2b $ doas newfs sd2b
/dev/rsd2b: 15.7MB in 32096 sectors of 512 bytes
5 cylinder groups of 3.89MB, 249 blocks, 512 inodes each
super-block backups (for fsck -b #) at:
32, 8000, 15968, 23936, 31904,
$ doas mkdir /mnt/public $ doas mkdir /mnt/public
@ -1805,7 +1796,12 @@ $ doas reboot
Windows can already have some virtual smartcard readers installed, like the one provided for Windows Hello. To ensure your YubiKey is the correct one used by scdaemon, you should add it to its configuration. You will need your device's full name. To find out what is your device's full name, plug your YubiKey, open the Device Manager, select "View > Show hidden devices". Go to the Software Devices list, you should see something like `Yubico YubiKey OTP+FIDO+CCID 0`. The name slightly differs according to the model. Thanks to [Scott Hanselman](https://www.hanselman.com/blog/HowToSetupSignedGitCommitsWithAYubiKeyNEOAndGPGAndKeybaseOnWindows.aspx) for sharing this information. Windows can already have some virtual smartcard readers installed, like the one provided for Windows Hello. To ensure your YubiKey is the correct one used by scdaemon, you should add it to its configuration. You will need your device's full name. To find out what is your device's full name, plug your YubiKey, open the Device Manager, select "View > Show hidden devices". Go to the Software Devices list, you should see something like `Yubico YubiKey OTP+FIDO+CCID 0`. The name slightly differs according to the model. Thanks to [Scott Hanselman](https://www.hanselman.com/blog/HowToSetupSignedGitCommitsWithAYubiKeyNEOAndGPGAndKeybaseOnWindows.aspx) for sharing this information.
* Create or edit `%APPDATA%/gnupg/scdaemon.conf` to add `reader-port <your yubikey device's full name>` * Create or edit `%APPDATA%/gnupg/scdaemon.conf` to add:
```
reader-port <your yubikey device's full name>
```
* Edit `%APPDATA%/gnupg/gpg-agent.conf` to add: * Edit `%APPDATA%/gnupg/gpg-agent.conf` to add:
``` ```
@ -1828,7 +1824,7 @@ enable-putty-support
Copy this key to a file for later use. It represents the public SSH key corresponding to the secret key on the YubiKey. You can upload this key to any server you wish to SSH into. Copy this key to a file for later use. It represents the public SSH key corresponding to the secret key on the YubiKey. You can upload this key to any server you wish to SSH into.
* Create a shortcut that points to `gpg-connect-agent /bye` and place it in the startup folder `shell:startup` to make sure the agent starts after a system shutdown. Modify the shortcut properties so it starts in a "Minimized" window, to avoid unnecessary noise at startup. Create a shortcut that points to `gpg-connect-agent /bye` and place it in the startup folder `shell:startup` to make sure the agent starts after a system shutdown. Modify the shortcut properties so it starts in a "Minimized" window, to avoid unnecessary noise at startup.
Now you can use PuTTY for public key SSH authentication. When the server asks for public key verification, PuTTY will forward the request to GPG, which will prompt you for a PIN and authorize the login using YubiKey. Now you can use PuTTY for public key SSH authentication. When the server asks for public key verification, PuTTY will forward the request to GPG, which will prompt you for a PIN and authorize the login using YubiKey.
@ -1857,14 +1853,14 @@ Edit `~/.ssh/config` to add the following for each host you want to use agent fo
``` ```
ForwardAgent yes ForwardAgent yes
RemoteForward <remote ssh socket path> /tmp/S.weasel-pageant RemoteForward <remote SSH socket path> /tmp/S.weasel-pageant
``` ```
**Note** The remote ssh socket path can be found with `gpgconf --list-dirs agent-ssh-socket` **Note** The remote SSH socket path can be found with `gpgconf --list-dirs agent-ssh-socket`
#### Remote host configuration #### Remote host configuration
You may have to add the following to the shell rc file: _(On Linux, this is only required on the laptop/workstation where the YubiKey is plugged in, and **NOT** on the remote host server that you connect to; in fact at least on some Linux distributions, changing SSH_AUTH_SOCK on the server breaks agent forwarding.)_ You may have to add the following to the shell rc file. On Linux, this is only required on the laptop/workstation where the YubiKey is plugged in, and **NOT** on the remote host server that you connect to; in fact at least on some Linux distributions, changing SSH_AUTH_SOCK on the server breaks agent forwarding.
``` ```
export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)