qubes-linux-template-builder/functions.sh

#!/bin/bash
# vim: set ts=4 sw=4 sts=4 et :

set -e

VERBOSE=${VERBOSE:-1}
DEBUG=${DEBUG:-0}

. ./functions-name.sh

################################################################################
# Global functions
################################################################################
# ------------------------------------------------------------------------------
# Set xtrace verbose mode (-x or)
# ------------------------------------------------------------------------------
XTRACE=
function setVerboseMode() {
    # Cache xtrace current status so it can be restored on exit
    [[ ${-/x} != $- ]] && XTRACE=0 || XTRACE=1

    if [ "${VERBOSE}" -ge 2 -o "${DEBUG}" -ge 2 ]; then
        set -x
    else
        set +x
    fi
}

# ------------------------------------------------------------------------------
# Define colors
# ------------------------------------------------------------------------------
colors() {
   ## Thanks to:
   ## http://mywiki.wooledge.org/BashFAQ/037
   ## Variables for terminal requests.
   [[ -t 2 ]] && {
       export alt=$(      tput smcup  || tput ti      ) # Start alt display
       export ealt=$(     tput rmcup  || tput te      ) # End   alt display
       export hide=$(     tput civis  || tput vi      ) # Hide cursor
       export show=$(     tput cnorm  || tput ve      ) # Show cursor
       export save=$(     tput sc                     ) # Save cursor
       export load=$(     tput rc                     ) # Load cursor
       export bold=$(     tput bold   || tput md      ) # Start bold
       export stout=$(    tput smso   || tput so      ) # Start stand-out
       export estout=$(   tput rmso   || tput se      ) # End stand-out
       export under=$(    tput smul   || tput us      ) # Start underline
       export eunder=$(   tput rmul   || tput ue      ) # End   underline
       export reset=$(    tput sgr0   || tput me      ) # Reset cursor
       export blink=$(    tput blink  || tput mb      ) # Start blinking
       export italic=$(   tput sitm   || tput ZH      ) # Start italic
       export eitalic=$(  tput ritm   || tput ZR      ) # End   italic
   [[ ${TERM} != *-m ]] && {
       export red=$(      tput setaf 1|| tput AF 1    )
       export green=$(    tput setaf 2|| tput AF 2    )
       export yellow=$(   tput setaf 3|| tput AF 3    )
       export blue=$(     tput setaf 4|| tput AF 4    )
       export magenta=$(  tput setaf 5|| tput AF 5    )
       export cyan=$(     tput setaf 6|| tput AF 6    )
   }
       export white=$(    tput setaf 7|| tput AF 7    )
       export default=$(  tput op                     )
       export eed=$(      tput ed     || tput cd      )   # Erase to end of display
       export eel=$(      tput el     || tput ce      )   # Erase to end of line
       export ebl=$(      tput el1    || tput cb      )   # Erase to beginning of line
       export ewl=$eel$ebl                                # Erase whole line
       export draw=$(     tput -S <<< '   enacs
                                   smacs
                                   acsc
                                   rmacs' || { \
                   tput eA; tput as;
                   tput ac; tput ae;         } )   # Drawing characters
       export back=$'\b'
   } 2>/dev/null ||:

   export build_already_defined_colors="true"
}

if [ ! "$build_already_defined_colors" = "true" ]; then
   colors
fi

if [ "${VERBOSE}" -ge 2 -o "${DEBUG}" == "1" ]; then
    chroot() {
        local retval
        true ${blue}
        if [ "${SYSTEMD_NSPAWN_ENABLE}"  == "1" ]; then
            systemd-nspawn $systemd_bind -D "${INSTALLDIR}" -M "${DIST}" "$@" && { retval=$?; true; } || { retval=$?; true; }
        else
            /usr/sbin/chroot "${INSTALLDIR}" "$@" && { retval=$?; true; } || { retval=$?; true; }
        fi
        true ${reset}
        return $retval
    }
else
    chroot() {
        /usr/sbin/chroot "${INSTALLDIR}" "$@"
    }
fi

# ------------------------------------------------------------------------------
# Return xtrace's current mode
# 0 is enables (-x); 1 is disables (+x)
# ------------------------------------------------------------------------------
getXtrace() {
    [[ ${-/x} != $- ]] && echo 0 || echo 1
}

# ------------------------------------------------------------------------------
# Return xtrace to desired state
# 0 is enables (-x); 1 is disables (+x)
# ------------------------------------------------------------------------------
setXtrace() {
    [[ "${1}" -eq 0 ]] && set -x || set +x
}

# ------------------------------------------------------------------------------
# Display messages in color
# ------------------------------------------------------------------------------
# Only output text under certain conditions
output() {
    if [ "${VERBOSE}" -ge 1 ]; then
        # Don't echo if -x is set since it will already be displayed via true
        [[ ${-/x} != $- ]] || echo -e ""$@""
    fi
}

outputc() {
    color=${1}
    shift
    output "${!color}"$@"${reset}" || :
}

info() {
    output "${bold}${blue}INFO: "$@"${reset}" || :
}

debug() {
    output "${bold}${green}DEBUG: "$@"${reset}" || :
}

warn() {
    output "${stout}${yellow}WARNING: "$@"${reset}" || :
}

error() {
    output "${bold}${red}ERROR: "$@"${reset}" || :
}

# ------------------------------------------------------------------------------
# Takes an array and exports it a global variable
#
# $1: Array to export
# $2: Global variable name to use for export
#
# http://ihaveabackup.net/2012/01/29/a-workaround-for-passing-arrays-in-bash/
#
# ------------------------------------------------------------------------------
setArrayAsGlobal() {
    local array="$1"
    local export_as="$2"
    local code=$(declare -p "$array")
    local replaced="${code/$array/$export_as}"
    eval ${replaced/declare -/declare -g}
} 


# ------------------------------------------------------------------------------
# Spilts the path and returns an array of parts
#
# $1: Full path of file to split
# $2: Global variable name to use for export
# Returns:
# ([full]='original name' [dir]='directory' [base]='filename' [ext]='extension')
#
# Original concept path split from:
# https://stackoverflow.com/questions/965053/extract-filename-and-extension-in-bash
#
# ------------------------------------------------------------------------------
splitPath() {

    local return_global_var=$2
    local filename="${1##*/}"                  # Strip longest match of */ from start
    local dir="${1:0:${#1} - ${#filename}}"    # Substring from 0 thru pos of filename
    local base="${filename%.[^.]*}"            # Strip shortest match of . plus at least one non-dot char from end
    local ext="${filename:${#base} + 1}"       # Substring from len of base thru end
    if [ "$ext" ]; then
        local dotext=".$ext"
    else
        local dotext=""
    fi
    if [[ -z "$base" && -n "$ext" ]]; then     # If we have an extension and no base, it's really the base
        base=".$ext"
        ext=""
        dotext=""
    fi

    declare -A PARTS=([full]="$1" [dir]="$dir" [base]="$base" [ext]="$ext" [dotext]="$dotext")
    setArrayAsGlobal PARTS $return_global_var
}

templateDir() {
    local template_flavor=${1-${TEMPLATE_FLAVOR}}

    # If TEMPLATE_FLAVOR_DIR is not already an array, make it one
    if ! [[ "$(declare -p TEMPLATE_FLAVOR_DIR 2>/dev/null)" =~ ^declare\ -a.* ]] ; then 
        TEMPLATE_FLAVOR_DIR=( ${TEMPLATE_FLAVOR_DIR} )
    fi

    for element in "${TEMPLATE_FLAVOR_DIR[@]}"
    do 
        # (wheezy+whonix-gateway / wheezy+whonix-gateway+gnome[+++] / wheezy+gnome )
        if [ "${element%:*}" == "$(templateName ${template_flavor})" ]; then
            eval echo -e "${element#*:}"
            return
        # Very short name compare (+proxy)
        elif [ "${element:0:1}" == "+" -a "${element%:*}" == "+${template_flavor}" ]; then
            eval echo -e "${element#*:}"
            return
        fi
    done

    local template_flavor_prefix="$(templateFlavorPrefix ${template_flavor})"
    if [ -n "${template_flavor}" -a "${template_flavor}" == "+" ]; then
        local dir="${SCRIPTSDIR}/${template_flavor_prefix}"
    elif [ -n "${template_flavor}" ]; then
        local dir="${SCRIPTSDIR}/${template_flavor_prefix}${template_flavor}"
    else
        local dir="${SCRIPTSDIR}"
    fi

    echo "${dir}"
}

templateFile() {
    local file="$1"
    local suffix="$2"
    local template_flavor="$3"
    local template_dir="$(templateDir "${template_flavor}")"

    splitPath "${file}" path_parts

    # Append suffix to filename (before extension)
    if [ "${suffix}" ]; then
        file="${template_dir}/${path_parts[base]}_${suffix}${path_parts[dotext]}"
    else
        file="${template_dir}/${path_parts[base]}${path_parts[dotext]}"
    fi

    if [ -f "${file}" ]; then
        echo "${file}"
    fi
}

buildStepExec() {
    local filename="$1"
    local suffix="$2"
    local template_flavor="$3"

    script="$(templateFile "${filename}" "${suffix}" "${template_flavor}")"

    if [ -f "${script}" ] && [ ! ${GLOBAL_CACHE[$script]+_} ]; then

        # Test module expects raw  output back only used to asser test results
        if [[ -n ${TEST} ]]; then
            echo "${script}" 
        else
            output "${bold}${under}INFO: Currently running script: ${script}${reset}"
        fi

        # Cache $script
        GLOBAL_CACHE[$script]=1

        # Execute $script
        "${script}"
    fi
}

copyTreeExec() {
    local source_dir="$1"
    local dir="$2"
    local template_flavor="$3"
    local target_dir="$4"

    local template_dir="$(templateDir ${template_flavor})"
    local source_dir="$(readlink -m ${source_dir:-${template_dir}}/${dir})"
    local target_dir="$(readlink -m ${target_dir:-${INSTALLDIR}})"

    if ! [ -d "${source_dir}" ]; then
        debug "No extra files to copy for ${dir}"
	    return 0
    fi

    debug "Copying ${source_dir}/* ${target_dir}"
    cp -rp "${source_dir}/." "${target_dir}"

    if [ -f "${source_dir}/.facl" ]; then
        debug "Restoring file permissions..."
        pushd "${target_dir}"
        {
            setfacl --restore="${source_dir}/.facl" 2>/dev/null ||:
            rm -f .facl
        }
        popd
    fi
}

callTemplateFunction() {
    # Reset Cache
    unset GLOBAL_CACHE
    declare -A -g GLOBAL_CACHE

    local calling_script="$1"
    local calling_arg="$2"
    local functionExec="$3"
    local template_flavor="${TEMPLATE_FLAVOR}"
 
    ${functionExec} "${calling_script}" \
                    "${calling_arg}" \
                    "${template_flavor}"

    # Find a $DIST sub-directory
    ${functionExec} "${calling_script}" \
                    "${calling_arg}" \
                    "+"

    for option in ${TEMPLATE_OPTIONS[@]}
    do
        # Long name (wheezy+whonix-gateway+proxy)
        ${functionExec} "${calling_script}" \
                        "${calling_arg}" \
                        "${TEMPLATE_FLAVOR}+${option}"

        # Short name (wheezy+proxy)
        ${functionExec} "${calling_script}" \
                        "${calling_arg}" \
                        "${option}"
    done

    # If template_flavor exists, also check on base distro
    if [ -n "${template_flavor}" ]; then
        ${functionExec} "${calling_script}" \
                        "${calling_arg}"
    fi
}

# ------------------------------------------------------------------------------
# Will return all files that match pattern of suffix
# Example: 
#   filename = packages.list
#   suffix = ${DIST} (wheezy)
#
# Will look for a file name packages_wheezy.list in:
#   the $SCRIPTSDIR; beside original
#   the $SCRIPTSDIR/$DIST (wheezy) directory
#   any included template module directories ($SCRIPTSDIR/gnome)
#
# All matches are returned and each will be able to be used
# ------------------------------------------------------------------------------
getFileLocations() {
    local return_global_var=$1
    local filename="$2"
    local suffix="$3"
    local function="templateFile"

    files="$(callTemplateFunction "${filename}" "${suffix}" "${function}")"

    IFS_orig="${IFS}}"; IFS=$'\n'
    files=( "${files}" )
    setArrayAsGlobal files $return_global_var

    IFS="${IFS_orig}"
}

# ------------------------------------------------------------------------------
# Executes any additional optional configuration steps if the configuration
# scripts exist
#
# Will find all scripts with 
# Example: 
#   filename = 04_install_qubes.sh
#   suffix = post
#
# Will look for a file name 04_install_qubes_post in:
#   the $SCRIPTSDIR; beside original
#   the $SCRIPTSDIR/$DIST (wheezy) directory
#   any included template module directories ($SCRIPTSDIR/gnome)
#
# All matches are executed
# ------------------------------------------------------------------------------
buildStep() {
    local filename="$1"
    local suffix="$2"
    local function="buildStepExec"

    callTemplateFunction "${filename}" "${suffix}" "${function}"
}

# ------------------------------------------------------------------------------
# Copy extra file tree to ${INSTALLDIR} 
# TODO:  Allow copy per step (04_install_qubes.sh-files)
#
# To set file permissions is a PITA since git won't save them and will
# complain heavily if they are set to root only read, so this is the procdure:
#
# 1. Change to the directory that you want to have file permissions retained
# 2. Change all the file permissions / ownership as you want
# 3. Change back to the root of the exta directory (IE: extra-qubes-files)
# 4. Manually restore facl's: setfacl --restore=.facl
# 5. Manually create facl backup used after copying: getfacl -R . > .facl
# 6. If git complains; reset file ownership back to user.  The .facl file stored
#    the file permissions and will be used to reset the file permissions after
#    they get copied over to ${INSTALLDIR}
# NOTE: Don't forget to redo this process if you add -OR- remove files
# ------------------------------------------------------------------------------
copyTree() {
    local dir="$1"
    local source_dir="$2"
    local target_dir="$3"
    local function="copyTreeExec"

    if [ "x${source_dir}" == "x" ]; then
        callTemplateFunction "" "${dir}" "${function}"
    else
        copyTreeExec "${source_dir}" "${dir}" "" "${target_dir}"
    fi
}

# $0 is module that sourced vars.sh
output "${bold}${under}INFO: Currently running script: ${0}${reset}"