QubesOS/qubes-linux-kernel
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7b8848f293
qubes-linux-kernel/patches.arch/x86_mce_intel_decode_physical_address.patch
Joanna Rutkowska d1298d1dfb Keeps patches unpacked for easier history browsing
2010-07-07 13:12:45 +02:00

582 lines
17 KiB
Diff
Raw Blame History

From: Andi Kleen <andi@firstfloor.org>
Subject: x86, mce: Xeon75xx specific interface to get corrected memory error information
Patch-Mainline: submitted to x86-tip, added but reverted due to a minor compile issue
which gets fixed by and incremental patch
References: bnc#573380, fate#307738
http://lkml.org/lkml/2010/1/22/98
Xeon 75xx doesn't log physical addresses on corrected machine check
events in the standard architectural MSRs. Instead the address has to
be retrieved in a model specific way. This makes it impossible to do
predictive failure analysis.
Implement cpu model specific code to do this in mce-xeon75xx.c using a
new hook that is called from the generic poll code. The code retrieves
the physical address/DIMM of the last corrected error from the
platform and makes the address look like a standard architectural MCA
address for further processing.
In addition the DIMM information is retrieved and put into two new
aux0/aux1 fields in struct mce. These fields are specific to a given
CPU. These fields can then be decoded by mcelog into specific DIMM
information. The latest mcelog version has support for this.
Longer term this will be likely in a different output format, but
short term that seemed like the least intrusive solution. Older mcelog
can deal with an extended record.
There's no code to print this information on a panic because this only
works for corrected errors, and corrected errors do not usually result
in panics.
The act of retrieving the DIMM/PA information can take some time, so
this code has a rate limit to avoid taking too much CPU time on a
error flood.
The whole thing can be loaded as a module and has suitable PCI-IDs so
that it can be auto-loaded by a distribution. The code also checks
explicitely for the expected CPU model number to make sure this code
doesn't run anywhere else.
Signed-off-by: Thomas Renninger <trenn@suse.de>
---
arch/x86/Kconfig | 8
arch/x86/include/asm/mce.h | 2
arch/x86/kernel/cpu/mcheck/Makefile | 1
arch/x86/kernel/cpu/mcheck/mce-internal.h | 1
arch/x86/kernel/cpu/mcheck/mce-xeon75xx.c | 427 ++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/mcheck/mce.c | 11
arch/x86/kernel/e820.c | 3
7 files changed, 452 insertions(+), 1 deletion(-)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -919,6 +919,14 @@ config X86_MCE_INTEL
Additional support for intel specific MCE features such as
the thermal monitor.
+config X86_MCE_XEON75XX
+ tristate "Intel Xeon 7500 series corrected memory error driver"
+ depends on X86_MCE_INTEL
+ ---help---
+ Add support for a Intel Xeon 7500 series specific memory error driver.
+ This allows to report the DIMM and physical address on a corrected
+ memory error machine check event.
+
config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -67,6 +67,8 @@ struct mce {
__u32 socketid; /* CPU socket ID */
__u32 apicid; /* CPU initial apic ID */
__u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
+ __u64 aux0; /* model specific */
+ __u64 aux1; /* model specific */
};
/*
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -2,6 +2,7 @@ obj-y = mce.o mce-severity.o
obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
+obj-$(CONFIG_X86_MCE_XEON75XX) += mce-xeon75xx.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o
obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -28,3 +28,4 @@ extern int mce_ser;
extern struct mce_bank *mce_banks;
+extern void (*cpu_specific_poll)(struct mce *);
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-xeon75xx.c
@@ -0,0 +1,427 @@
+/*
+ * Xeon 7500 series specific machine check support code.
+ * Copyright 2009, 2010 Intel Corporation
+ * Author: Andi Kleen
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Implement Xeon 7500 series specific code to retrieve the physical address
+ * and DIMM information for corrected memory errors.
+ *
+ * Interface: mce->aux0/aux1 is mapped to a struct pfa_dimm with pad
+ * redefined to DIMM valid bits. Consumers check CPUID and bank and
+ * then interpret aux0/aux1
+ */
+
+/* #define DEBUG 1 */ /* disable for production */
+#define pr_fmt(x) "MCE: " x
+
+#include <linux/moduleparam.h>
+#include <linux/pci_ids.h>
+#include <linux/hrtimer.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/e820.h>
+#include <asm/mce.h>
+#include <asm/io.h>
+
+#include "mce-internal.h"
+
+#define PFA_SIG "$PFA"
+#define PFA_SIG_LEN 4
+
+/* DIMM description */
+struct aux_pfa_dimm {
+ u8 fbd_channel_id;
+ u8 ddr_channel_id;
+ u8 ddr_dimm_id;
+ u8 ddr_rank_id;
+ u8 ddr_dimm_bank_id;
+ u8 ddr_dimm_row_id;
+ u8 ddr_dimm_column_id;
+ u8 valid;
+} __attribute__((packed));
+
+struct pfa_dimm {
+ u8 fbd_channel_id;
+ u8 ddr_channel_id;
+ u8 ddr_dimm_id;
+ u8 ddr_rank_id;
+ u8 ddr_dimm_bank_id;
+ u32 ddr_dimm_row_id;
+ u32 ddr_dimm_column_id;
+} __attribute__((packed));
+
+/* Memory translation table in memory. */
+struct pfa_table {
+ u8 sig[PFA_SIG_LEN]; /* Signature: '$PFA' */
+ u16 len; /* total length */
+ u16 revision; /* 0x11 */
+ u8 checksum; /* 8bit sum to zero */
+ u8 db_value; /* mailbox port command value */
+ u8 db_port; /* mailbox port */
+ /* end of header; end of checksum */
+ u8 command; /* input command */
+ u32 valid; /* valid input/output bits */
+ u16 status; /* output status */
+ u8 socket_id; /* input socket id*/
+ u8 bank_id; /* input MCE bank id */
+ u32 pad1;
+ u64 mbox_address;
+ u64 physical_addr; /* physical address */
+ struct pfa_dimm dimm[2];
+ /*
+ * topology information follows: not used for now.
+ */
+} __attribute__((packed));
+
+/* DIMM valid bits in valid: DIMM0: 8..12; DIMM1 16..20 */
+#define DIMM_VALID_BITS(val, num) (((val) >> (4 + (num) * 8)) & DIMM_VALID_ALL)
+#define DIMM_SET_VALID(val, num) ((val) << (4 + (num) * 8))
+
+enum {
+ MCE_BANK_MBOX0 = 8,
+ MCE_BANK_MBOX1 = 9,
+
+ PFA_REVISION = 0x11, /* v1.1 */
+
+ /* Status bits for valid field */
+ PFA_VALID_MA = (1 << 0),
+ PFA_VALID_SOCKETID = (1 << 1),
+ PFA_VALID_BANKID = (1 << 2),
+ PFA_VALID_PA = (1 << 3),
+
+ /* DIMM valid bits in valid */
+ /* use with DIMM_VALID_BITS/DIMM_SET_VALID for pfa->valid */
+ DIMM_VALID_FBD_CHAN = (1 << 0),
+ DIMM_VALID_DDR_CHAN = (1 << 1),
+ DIMM_VALID_DDR_DIMM = (1 << 2),
+ DIMM_VALID_DDR_RANK = (1 << 3),
+ DIMM_VALID_DIMM_BANK = (1 << 4),
+ DIMM_VALID_DIMM_ROW = (1 << 5),
+ DIMM_VALID_DIMM_COLUMN = (1 << 6),
+ DIMM_VALID_ALL = 0x7f,
+
+ PFA_DIMM_VALID_MASK = DIMM_SET_VALID(DIMM_VALID_ALL, 0)
+ | DIMM_SET_VALID(DIMM_VALID_ALL, 1),
+
+ /* Values for status field */
+ PFA_STATUS_SUCCESS = 0,
+ PFA_STATUS_SOCKET_INVALID = (1 << 1),
+ PFA_STATUS_MBOX_INVALID = (1 << 2),
+ PFA_STATUS_MA_INVALID = (1 << 3),
+ PFA_STATUS_PA_INVALID = (1 << 4),
+
+ /* Values for command field */
+ PFA_CMD_GET_MEM_CORR_ERR_PA = 0,
+ PFA_CMD_PA_TO_DIMM_ADDR = 1,
+ PFA_CMD_DIMM_TO_PA = 2,
+ PFA_CMD_GET_TOPOLOGY = 3,
+
+ /* PCI device IDs and the base register */
+ ICH_PFA_CFG = 0x8c, /* SCRATCH4 */
+ PCI_DEVICE_ID_BXB_ICH_LEGACY0 = 0x3422,
+};
+
+static struct pfa_table *pfa_table __read_mostly;
+static int memerr_max_conv_rate __read_mostly = 100;
+static int memerr_min_interval __read_mostly = 500;
+static int pfa_lost; /* for diagnosis */
+
+enum {
+ RATE_LIMIT_PERIOD = USEC_PER_SEC, /* in us; period of rate limit */
+};
+
+module_param(memerr_max_conv_rate, int, 0644);
+MODULE_PARM_DESC(memerr_max_conv_rate,
+ "Maximum number of memory error conversions each second; 0 to disable");
+module_param(memerr_min_interval, int, 0644);
+MODULE_PARM_DESC(memerr_min_interval,
+ "Minimum time delta between two memory conversions; in us; default 500");
+
+static int notest;
+static int nocsum;
+module_param(notest, int, 0);
+module_param(nocsum, int, 0);
+
+static u64 encode_dimm(struct pfa_dimm *d, u8 valid)
+{
+ union {
+ struct aux_pfa_dimm d;
+ u64 v;
+ } p;
+
+ BUILD_BUG_ON(sizeof(struct aux_pfa_dimm) != sizeof(u64));
+ p.d.fbd_channel_id = d->fbd_channel_id;
+ p.d.ddr_channel_id = d->ddr_channel_id;
+ p.d.ddr_dimm_id = d->ddr_dimm_id;
+ p.d.ddr_rank_id = d->ddr_rank_id;
+ p.d.ddr_dimm_bank_id = d->ddr_dimm_bank_id;
+ p.d.ddr_dimm_row_id = d->ddr_dimm_row_id;
+ if (p.d.ddr_dimm_row_id != d->ddr_dimm_row_id) /* truncated? */
+ valid &= ~DIMM_VALID_DIMM_ROW;
+ p.d.ddr_dimm_column_id = d->ddr_dimm_column_id;
+ if (p.d.ddr_dimm_column_id != d->ddr_dimm_column_id)
+ valid &= ~DIMM_VALID_DIMM_COLUMN;
+ p.d.valid = valid;
+ pr_debug("PFA fbd_ch %u ddr_ch %u dimm %u rank %u bank %u valid %x\n",
+ d->fbd_channel_id,
+ d->ddr_channel_id,
+ d->ddr_dimm_id,
+ d->ddr_rank_id,
+ d->ddr_dimm_bank_id,
+ valid);
+ return p.v;
+}
+
+static u8 csum(u8 *table, u16 len)
+{
+ u8 sum = 0;
+ int i;
+ for (i = 0; i < len; i++)
+ sum += *table++;
+ return sum;
+}
+
+/*
+ * Execute a command through the mailbox interface.
+ */
+static int
+pfa_command(unsigned bank, unsigned socketid, unsigned command, unsigned valid)
+{
+ pfa_table->bank_id = bank;
+ pfa_table->socket_id = socketid;
+ pfa_table->valid = valid | PFA_VALID_SOCKETID;
+ pfa_table->command = command;
+
+ outb(pfa_table->db_value, pfa_table->db_port);
+
+ mb(); /* Reread fields after they got changed */
+
+ if (pfa_table->status != PFA_STATUS_SUCCESS) {
+ pr_debug("Memory PFA command %d failed: socket:%d bank:%d status:%x\n",
+ command, socketid, bank, pfa_table->status);
+ return -pfa_table->status;
+ }
+ return 0;
+}
+
+/*
+ * Retrieve physical address and DIMMs.
+ */
+static int translate_memory_error(struct mce *m)
+{
+ struct pfa_table *pfa = pfa_table;
+ u64 status;
+ int ret;
+ u32 valid;
+ int cpu = smp_processor_id();
+
+ /* Make sure our structures match the specification */
+ BUILD_BUG_ON(offsetof(struct pfa_table, physical_addr) != 0x20);
+ BUILD_BUG_ON(offsetof(struct pfa_table, status) != 0x10);
+ BUILD_BUG_ON(offsetof(struct pfa_table, physical_addr) != 0x20);
+ BUILD_BUG_ON(offsetof(struct pfa_table, dimm[1].ddr_dimm_column_id) !=
+ 0x3e);
+
+ /* Ask for PA/DIMMs of last error */
+ if (pfa_command(m->bank, m->socketid,
+ PFA_CMD_GET_MEM_CORR_ERR_PA, PFA_VALID_BANKID) < 0)
+ return -1;
+
+ /*
+ * Recheck machine check bank. If the overflow bit was set
+ * there was a race. Don't use the information in this case.
+ */
+ rdmsrl(MSR_IA32_MCx_STATUS(m->bank), status);
+ if (status & MCI_STATUS_OVER) {
+ pr_debug("%d: overflow race on bank %d\n", cpu, m->bank);
+ return -1;
+ }
+
+ ret = -1;
+ valid = pfa->valid;
+ if (valid & PFA_VALID_PA) {
+ m->status |= MCI_STATUS_ADDRV;
+ m->addr = pfa_table->physical_addr;
+ pr_debug("%d: got physical address %llx valid %x\n",
+ cpu, m->addr, valid);
+ ret = 0;
+ }
+
+ /* When DIMM information was supplied pass it out */
+ if (valid & PFA_DIMM_VALID_MASK) {
+ m->aux0 = encode_dimm(&pfa->dimm[0], DIMM_VALID_BITS(valid, 0));
+ m->aux1 = encode_dimm(&pfa->dimm[1], DIMM_VALID_BITS(valid, 1));
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * Xeon 75xx specific mce poll method to retrieve the physical address
+ * and DIMM information.
+ */
+static void xeon75xx_mce_poll(struct mce *m)
+{
+ static DEFINE_SPINLOCK(convert_lock); /* Protect table and static */
+ static unsigned long cperm;
+ static ktime_t last, last_int;
+ unsigned long flags;
+ ktime_t now;
+ s64 delta;
+
+ /* Memory error? */
+ if (m->bank != MCE_BANK_MBOX0 && m->bank != MCE_BANK_MBOX1)
+ return;
+ if (m->status & MCI_STATUS_OVER)
+ return;
+ if (memerr_max_conv_rate == 0)
+ return;
+
+ spin_lock_irqsave(&convert_lock, flags);
+ /*
+ * Rate limit conversions. The conversion takes some time,
+ * but it's not good to use all the CPU time during a error
+ * flood.
+ * Enforce maximum number per second and minimum interval.
+ * The ktime call should use TSC on this machine and be fast.
+ */
+ now = ktime_get();
+ delta = ktime_us_delta(now, last);
+ if (delta >= RATE_LIMIT_PERIOD) {
+ cperm = 0;
+ last = now;
+ }
+ if (ktime_us_delta(now, last_int) >= memerr_min_interval &&
+ ++cperm <= memerr_max_conv_rate) {
+ if (translate_memory_error(m) < 0) {
+ /* On error stop converting for the next second */
+ cperm = memerr_max_conv_rate;
+ pr_debug("PFA translation failed\n");
+ }
+ } else
+ pfa_lost++;
+ last_int = now;
+ spin_unlock_irqrestore(&convert_lock, flags);
+}
+
+static struct pci_device_id bxb_mce_pciids[] = {
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_BXB_ICH_LEGACY0) },
+ {}
+};
+
+static int __init xeon75xx_mce_init(void)
+{
+ u32 addr = 0;
+ struct pci_dev *dev;
+
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
+ boot_cpu_data.x86 != 6 ||
+ boot_cpu_data.x86_model != 0x2e)
+ return -ENODEV;
+
+ /*
+ * Get table address from register in IOH.
+ * This just looks up the device, because we don't want to "own" it.
+ */
+ dev = NULL;
+ while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, dev))
+ != NULL) {
+ if (!pci_match_id(bxb_mce_pciids, dev))
+ continue;
+ pci_read_config_dword(dev, ICH_PFA_CFG, &addr);
+ if (addr)
+ break;
+ }
+ pci_dev_put(dev);
+ if (!addr)
+ return -ENODEV;
+
+ if (!e820_all_mapped(addr, addr + PAGE_SIZE, E820_RESERVED)) {
+ pr_info("PFA table at %x not e820 reserved\n", addr);
+ return -ENODEV;
+ }
+
+ pfa_table = (__force struct pfa_table *)ioremap_cache(addr, PAGE_SIZE);
+ if (!pfa_table) {
+ pr_err("Cannot map PFA table at %x\n", addr);
+ return -EIO;
+ }
+
+ if (memcmp(&pfa_table->sig, PFA_SIG, PFA_SIG_LEN) ||
+ pfa_table->len < sizeof(struct pfa_table) ||
+ /* assume newer versions are compatible */
+ pfa_table->revision < PFA_REVISION) {
+ pr_info("PFA table at %x invalid\n", addr);
+ goto error_unmap;
+ }
+
+ if (!nocsum && csum((u8 *)pfa_table,
+ offsetof(struct pfa_table, command))) {
+ pr_info("PFA table at %x length %u has invalid checksum\n",
+ addr, pfa_table->len);
+ goto error_unmap;
+ }
+
+ /* Not strictly needed today */
+ if (pfa_table->len > PAGE_SIZE) {
+ unsigned len = roundup(pfa_table->len, PAGE_SIZE);
+ iounmap(pfa_table);
+ pfa_table = (__force void *)ioremap_cache(addr, len);
+ if (!pfa_table) {
+ pr_err("Cannot remap %u bytes PFA table at %x\n",
+ len, addr);
+ return -EIO;
+ }
+ }
+
+ if (!notest) {
+ int status = pfa_command(0, 0, PFA_CMD_GET_TOPOLOGY, 0);
+ if (status < 0) {
+ pr_err("Test of PFA table failed: %x\n", -status);
+ goto error_unmap;
+ }
+ }
+
+ pr_info("Found Xeon75xx PFA memory error translation table at %x\n",
+ addr);
+ mb();
+ cpu_specific_poll = xeon75xx_mce_poll;
+ return 0;
+
+error_unmap:
+ iounmap(pfa_table);
+ return -ENODEV;
+}
+
+MODULE_DEVICE_TABLE(pci, bxb_mce_pciids);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andi Kleen");
+MODULE_DESCRIPTION("Intel Xeon 75xx specific DIMM error reporting");
+
+#ifdef CONFIG_MODULE
+static void __exit xeon75xx_mce_exit(void)
+{
+ cpu_specific_poll = NULL;
+ wmb();
+ /* Wait for all machine checks to finish before really unloading */
+ synchronize_rcu();
+ iounmap(pfa_table);
+}
+
+module_init(xeon75xx_mce_init);
+module_exit(xeon75xx_mce_exit);
+#else
+/* When built-in run as soon as the PCI subsystem is up */
+fs_initcall(xeon75xx_mce_init);
+#endif
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -94,6 +94,8 @@ static char *mce_helper_argv[2] = { mc
static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
static DEFINE_PER_CPU(struct mce, mces_seen);
static int cpu_missing;
+void (*cpu_specific_poll)(struct mce *);
+EXPORT_SYMBOL_GPL(cpu_specific_poll);
/*
* CPU/chipset specific EDAC code can register a notifier call here to print
@@ -371,6 +373,11 @@ static void mce_wrmsrl(u32 msr, u64 v)
wrmsrl(msr, v);
}
+static int under_injection(void)
+{
+ return __get_cpu_var(injectm).finished;
+}
+
/*
* Simple lockless ring to communicate PFNs from the exception handler with the
* process context work function. This is vastly simplified because there's
@@ -574,6 +581,10 @@ void machine_check_poll(enum mcp_flags f
if (!(flags & MCP_TIMESTAMP))
m.tsc = 0;
+
+ if (cpu_specific_poll && !under_injection() && !mce_dont_log_ce)
+ cpu_specific_poll(&m);
+
/*
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL_GPL(e820_any_mapped);
* Note: this function only works correct if the e820 table is sorted and
* not-overlapping, which is the case
*/
-int __init e820_all_mapped(u64 start, u64 end, unsigned type)
+int e820_all_mapped(u64 start, u64 end, unsigned type)
{
int i;
@@ -98,6 +98,7 @@ int __init e820_all_mapped(u64 start, u6
}
return 0;
}
+EXPORT_SYMBOL_GPL(e820_all_mapped);
/*
* Add a memory region to the kernel e820 map.
Reference in New Issue View Git Blame Copy Permalink