From: kernel.org Subject: 2.6.26 Patch-mainline: 2.6.26 Acked-by: Jeff Mahoney Automatically created from "patches.kernel.org/patch-2.6.26" by xen-port-patches.py 2.6.35: arch/x86/include/asm/scatterlist.h change removed (would need to be reverted there) --- head-2011-03-11.orig/arch/x86/Kconfig 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/Kconfig 2011-01-31 18:07:35.000000000 +0100 @@ -41,7 +41,7 @@ config X86 select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE select HAVE_SYSCALL_TRACEPOINTS select HAVE_KVM if !XEN - select HAVE_ARCH_KGDB + select HAVE_ARCH_KGDB if !XEN select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -609,6 +609,7 @@ config NO_BOOTMEM config MEMTEST bool "Memtest" + depends on !XEN ---help--- This option adds a kernel parameter 'memtest', which allows memtest to be set. @@ -1193,7 +1194,7 @@ config ARCH_DMA_ADDR_T_64BIT config DIRECT_GBPAGES bool "Enable 1GB pages for kernel pagetables" if EXPERT default y - depends on X86_64 + depends on X86_64 && !XEN ---help--- Allow the kernel linear mapping to use 1GB pages on CPUs that support it. This can improve the kernel's performance a tiny bit by @@ -2267,6 +2268,4 @@ source "crypto/Kconfig" source "arch/x86/kvm/Kconfig" -source "drivers/xen/Kconfig" - source "lib/Kconfig" --- head-2011-03-11.orig/arch/x86/ia32/ia32entry-xen.S 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/ia32/ia32entry-xen.S 2011-01-31 18:07:35.000000000 +0100 @@ -129,12 +129,14 @@ sysenter_tracesys: SAVE_REST CLEAR_RREGS movq %r9,R9(%rsp) - movq $-ENOSYS,RAX(%rsp) /* really needed? */ + movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST xchgl %ebp,%r9d + cmpl $(IA32_NR_syscalls-1),%eax + ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */ jmp sysenter_do_call CFI_ENDPROC ENDPROC(ia32_sysenter_target) @@ -200,13 +202,15 @@ cstar_tracesys: SAVE_REST CLEAR_RREGS movq %r9,R9(%rsp) - movq $-ENOSYS,RAX(%rsp) /* really needed? */ + movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST xchgl %ebp,%r9d movl RSP-ARGOFFSET(%rsp), %r8d + cmpl $(IA32_NR_syscalls-1),%eax + ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */ jmp cstar_do_call END(ia32_cstar_target) @@ -264,7 +268,7 @@ ENTRY(ia32_syscall) jnz ia32_tracesys ia32_do_syscall: cmpl $(IA32_NR_syscalls-1),%eax - ja ia32_badsys + ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */ IA32_ARG_FIXUP call *ia32_sys_call_table(,%rax,8) # xxx: rip relative ia32_sysret: @@ -274,7 +278,7 @@ ia32_sysret: ia32_tracesys: SAVE_REST CLEAR_RREGS - movq $-ENOSYS,RAX(%rsp) /* really needed? */ + movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ @@ -365,7 +369,7 @@ ia32_sys_call_table: .quad sys_setuid16 .quad sys_getuid16 .quad compat_sys_stime /* stime */ /* 25 */ - .quad sys32_ptrace /* ptrace */ + .quad compat_sys_ptrace /* ptrace */ .quad sys_alarm .quad sys_fstat /* (old)fstat */ .quad sys_pause --- head-2011-03-11.orig/arch/x86/kernel/Makefile 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/Makefile 2011-01-31 18:07:35.000000000 +0100 @@ -127,8 +127,7 @@ ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_XEN) += nmi_64.o time_64-$(CONFIG_XEN) += time_32.o - pci-dma_64-$(CONFIG_XEN) += pci-dma_32.o endif -disabled-obj-$(CONFIG_XEN) := early-quirks.o hpet.o i8253.o i8259_$(BITS).o reboot.o \ - smpboot_$(BITS).o tsc_$(BITS).o tsc_sync.o +disabled-obj-$(CONFIG_XEN) := crash.o early-quirks.o hpet.o i8253.o i8259_$(BITS).o \ + pci-swiotlb_64.o reboot.o smpboot.o tlb_$(BITS).o tsc_$(BITS).o tsc_sync.o vsmp_64.o --- head-2011-03-11.orig/arch/x86/kernel/acpi/Makefile 2011-01-31 14:53:50.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/acpi/Makefile 2011-01-31 18:07:35.000000000 +0100 @@ -15,4 +15,4 @@ $(obj)/wakeup_rm.o: $(obj)/realmode/w $(obj)/realmode/wakeup.bin: FORCE $(Q)$(MAKE) $(build)=$(obj)/realmode -disabled-obj-$(CONFIG_XEN) := cstate.o wakeup_$(BITS).o +disabled-obj-$(CONFIG_XEN) := cstate.o wakeup_%.o --- head-2011-03-11.orig/arch/x86/kernel/acpi/boot.c 2011-03-11 10:56:21.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/acpi/boot.c 2011-03-11 10:59:02.000000000 +0100 @@ -206,6 +206,7 @@ static int __init acpi_parse_madt(struct static void __cpuinit acpi_register_lapic(int id, u8 enabled) { +#ifndef CONFIG_XEN unsigned int ver = 0; if (id >= (MAX_LOCAL_APIC-1)) { @@ -222,6 +223,7 @@ static void __cpuinit acpi_register_lapi ver = apic_version[boot_cpu_physical_apicid]; generic_processor_info(id, ver); +#endif } static int __init --- head-2011-03-11.orig/arch/x86/kernel/acpi/sleep-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/acpi/sleep-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -10,15 +10,19 @@ #include #include -#include +#include "realmode/wakeup.h" +#include "sleep.h" #ifndef CONFIG_ACPI_PV_SLEEP -/* address in low memory of the wakeup routine. */ -unsigned long acpi_wakeup_address = 0; +unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -extern char wakeup_start, wakeup_end; -extern unsigned long acpi_copy_wakeup_routine(unsigned long); +/* address in low memory of the wakeup routine. */ +static unsigned long acpi_realmode; + +#ifdef CONFIG_64BIT +static char temp_stack[10240]; +#endif #endif /** @@ -26,17 +30,69 @@ extern unsigned long acpi_copy_wakeup_ro * * Create an identity mapped page table and copy the wakeup routine to * low memory. + * + * Note that this is too late to change acpi_wakeup_address. */ int acpi_save_state_mem(void) { #ifndef CONFIG_ACPI_PV_SLEEP - if (!acpi_wakeup_address) { - printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n"); + struct wakeup_header *header; + + if (!acpi_realmode) { + printk(KERN_ERR "Could not allocate memory during boot, " + "S3 disabled\n"); return -ENOMEM; } - memcpy((void *)acpi_wakeup_address, &wakeup_start, - &wakeup_end - &wakeup_start); - acpi_copy_wakeup_routine(acpi_wakeup_address); + memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + + header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); + if (header->signature != 0x51ee1111) { + printk(KERN_ERR "wakeup header does not match\n"); + return -EINVAL; + } + + header->video_mode = saved_video_mode; + + header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + /* GDT[0]: GDT self-pointer */ + header->wakeup_gdt[0] = + (u64)(sizeof(header->wakeup_gdt) - 1) + + ((u64)(acpi_wakeup_address + + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) + << 16); + /* GDT[1]: real-mode-like code segment */ + header->wakeup_gdt[1] = (0x009bULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + /* GDT[2]: real-mode-like data segment */ + header->wakeup_gdt[2] = (0x0093ULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + +#ifndef CONFIG_64BIT + store_gdt((struct desc_ptr *)&header->pmode_gdt); + + header->pmode_efer_low = nx_enabled; + if (header->pmode_efer_low & 1) { + /* This is strange, why not save efer, always? */ + rdmsr(MSR_EFER, header->pmode_efer_low, + header->pmode_efer_high); + } +#endif /* !CONFIG_64BIT */ + + header->pmode_cr0 = read_cr0(); + header->pmode_cr4 = read_cr4(); + header->realmode_flags = acpi_realmode_flags; + header->real_magic = 0x12345678; + +#ifndef CONFIG_64BIT + header->pmode_entry = (u32)&wakeup_pmode_return; + header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET); + saved_magic = 0x12345678; +#else /* CONFIG_64BIT */ + header->trampoline_segment = setup_trampoline() >> 4; + init_rsp = (unsigned long)temp_stack + 4096; + initial_code = (unsigned long)wakeup_long64; + saved_magic = 0x123456789abcdef0; +#endif /* CONFIG_64BIT */ #endif return 0; @@ -61,15 +117,20 @@ void acpi_restore_state_mem(void) void __init acpi_reserve_bootmem(void) { #ifndef CONFIG_ACPI_PV_SLEEP - if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) { + if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } - acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2); - if (!acpi_wakeup_address) + acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE); + + if (!acpi_realmode) { printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); + return; + } + + acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); #endif } --- head-2011-03-11.orig/arch/x86/kernel/cpu/common-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/cpu/common-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -5,7 +5,6 @@ #include #include #include -#include #include #include #include @@ -13,6 +12,7 @@ #include #include #include +#include #ifdef CONFIG_X86_LOCAL_APIC #include #include @@ -69,9 +69,9 @@ __u32 cleared_cpu_caps[NCAPINTS] __cpuin static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; -struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; -static void __cpuinit default_init(struct cpuinfo_x86 * c) +static void __cpuinit default_init(struct cpuinfo_x86 *c) { /* Not much we can do here... */ /* Check if at least it has cpuid */ @@ -88,11 +88,11 @@ static struct cpu_dev __cpuinitdata defa .c_init = default_init, .c_vendor = "Unknown", }; -static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; static int __init cachesize_setup(char *str) { - get_option (&str, &cachesize_override); + get_option(&str, &cachesize_override); return 1; } __setup("cachesize=", cachesize_setup); @@ -114,12 +114,12 @@ int __cpuinit get_model_name(struct cpui /* Intel chips right-justify this string for some dumb reason; undo that brain damage */ p = q = &c->x86_model_id[0]; - while ( *p == ' ' ) + while (*p == ' ') p++; - if ( p != q ) { - while ( *p ) + if (p != q) { + while (*p) *q++ = *p++; - while ( q <= &c->x86_model_id[48] ) + while (q <= &c->x86_model_id[48]) *q++ = '\0'; /* Zero-pad the rest */ } @@ -137,7 +137,7 @@ void __cpuinit display_cacheinfo(struct cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size=(ecx>>24)+(edx>>24); + c->x86_cache_size = (ecx>>24)+(edx>>24); } if (n < 0x80000006) /* Some chips just has a large L1. */ @@ -145,16 +145,16 @@ void __cpuinit display_cacheinfo(struct ecx = cpuid_ecx(0x80000006); l2size = ecx >> 16; - + /* do processor-specific cache resizing */ if (this_cpu->c_size_cache) - l2size = this_cpu->c_size_cache(c,l2size); + l2size = this_cpu->c_size_cache(c, l2size); /* Allow user to override all this if necessary. */ if (cachesize_override != -1) l2size = cachesize_override; - if ( l2size == 0 ) + if (l2size == 0) return; /* Again, no L2 cache is possible */ c->x86_cache_size = l2size; @@ -163,16 +163,19 @@ void __cpuinit display_cacheinfo(struct l2size, ecx & 0xFF); } -/* Naming convention should be: [()] */ -/* This table only is used unless init_() below doesn't set it; */ -/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */ +/* + * Naming convention should be: [()] + * This table only is used unless init_() below doesn't set it; + * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used + * + */ /* Look up CPU names by table lookup. */ static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) { struct cpu_model_info *info; - if ( c->x86_model >= 16 ) + if (c->x86_model >= 16) return NULL; /* Range check */ if (!this_cpu) @@ -197,9 +200,9 @@ static void __cpuinit get_cpu_vendor(str for (i = 0; i < X86_VENDOR_NUM; i++) { if (cpu_devs[i]) { - if (!strcmp(v,cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v,cpu_devs[i]->c_ident[1]))) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { c->x86_vendor = i; if (!early) this_cpu = cpu_devs[i]; @@ -217,7 +220,7 @@ static void __cpuinit get_cpu_vendor(str } -static int __init x86_fxsr_setup(char * s) +static int __init x86_fxsr_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_FXSR); setup_clear_cpu_cap(X86_FEATURE_XMM); @@ -226,7 +229,7 @@ static int __init x86_fxsr_setup(char * __setup("nofxsr", x86_fxsr_setup); -static int __init x86_sep_setup(char * s) +static int __init x86_sep_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_SEP); return 1; @@ -315,12 +318,15 @@ static void __cpuinit early_get_cap(stru } -/* Do minimum CPU detection early. - Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment. - The others are not touched to avoid unwanted side effects. - - WARNING: this function is only called on the BP. Don't add code here - that is supposed to run on all CPUs. */ +/* + * Do minimum CPU detection early. + * Fields really needed: vendor, cpuid_level, family, model, mask, + * cache alignment. + * The others are not touched to avoid unwanted side effects. + * + * WARNING: this function is only called on the BP. Don't add code here + * that is supposed to run on all CPUs. + */ static void __init early_cpu_detect(void) { struct cpuinfo_x86 *c = &boot_cpu_data; @@ -335,19 +341,14 @@ static void __init early_cpu_detect(void get_cpu_vendor(c, 1); - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - } + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); early_get_cap(c); } -static void __cpuinit generic_identify(struct cpuinfo_x86 * c) +static void __cpuinit generic_identify(struct cpuinfo_x86 *c) { u32 tfms, xlvl; unsigned int ebx; @@ -358,13 +359,12 @@ static void __cpuinit generic_identify(s (unsigned int *)&c->x86_vendor_id[0], (unsigned int *)&c->x86_vendor_id[8], (unsigned int *)&c->x86_vendor_id[4]); - + get_cpu_vendor(c, 0); /* Initialize the standard set of capabilities */ /* Note that the vendor-specific code below might override */ - /* Intel-defined flags: level 0x00000001 */ - if ( c->cpuid_level >= 0x00000001 ) { + if (c->cpuid_level >= 0x00000001) { u32 capability, excap; cpuid(0x00000001, &tfms, &ebx, &excap, &capability); c->x86_capability[0] = capability; @@ -377,13 +377,15 @@ static void __cpuinit generic_identify(s c->x86_model += ((tfms >> 16) & 0xF) << 4; c->x86_mask = tfms & 15; #ifndef CONFIG_XEN + c->initial_apicid = (ebx >> 24) & 0xFF; #ifdef CONFIG_X86_HT - c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); + c->apicid = phys_pkg_id(c->initial_apicid, 0); + c->phys_proc_id = c->initial_apicid; #else - c->apicid = (ebx >> 24) & 0xFF; + c->apicid = c->initial_apicid; #endif #endif - if (c->x86_capability[0] & (1<<19)) + if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; } else { /* Have CPUID level 0 only - unheard of */ @@ -392,33 +394,30 @@ static void __cpuinit generic_identify(s /* AMD-defined flags: level 0x80000001 */ xlvl = cpuid_eax(0x80000000); - if ( (xlvl & 0xffff0000) == 0x80000000 ) { - if ( xlvl >= 0x80000001 ) { + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { c->x86_capability[1] = cpuid_edx(0x80000001); c->x86_capability[6] = cpuid_ecx(0x80000001); } - if ( xlvl >= 0x80000004 ) + if (xlvl >= 0x80000004) get_model_name(c); /* Default name */ } init_scattered_cpuid_features(c); } -#ifdef CONFIG_X86_HT - c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff; -#endif } static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) { - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) { + if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { /* Disable processor serial number */ - unsigned long lo,hi; - rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi); + unsigned long lo, hi; + rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi); + wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_bit(X86_FEATURE_PN, c->x86_capability); + clear_cpu_cap(c, X86_FEATURE_PN); /* Disabling the serial number may affect the cpuid level */ c->cpuid_level = cpuid_eax(0); @@ -455,9 +454,11 @@ void __cpuinit identify_cpu(struct cpuin memset(&c->x86_capability, 0, sizeof c->x86_capability); if (!have_cpuid_p()) { - /* First of all, decide if this is a 486 or higher */ - /* It's a 486 if we can modify the AC flag */ - if ( flag_is_changeable_p(X86_EFLAGS_AC) ) + /* + * First of all, decide if this is a 486 or higher + * It's a 486 if we can modify the AC flag + */ + if (flag_is_changeable_p(X86_EFLAGS_AC)) c->x86 = 4; else c->x86 = 3; @@ -490,10 +491,10 @@ void __cpuinit identify_cpu(struct cpuin */ /* If the model name is still unset, do table lookup. */ - if ( !c->x86_model_id[0] ) { + if (!c->x86_model_id[0]) { char *p; p = table_lookup_model(c); - if ( p ) + if (p) strcpy(c->x86_model_id, p); else /* Last resort... */ @@ -507,9 +508,9 @@ void __cpuinit identify_cpu(struct cpuin * common between the CPUs. The first time this routine gets * executed, c == &boot_cpu_data. */ - if ( c != &boot_cpu_data ) { + if (c != &boot_cpu_data) { /* AND the already accumulated flags with these */ - for ( i = 0 ; i < NCAPINTS ; i++ ) + for (i = 0 ; i < NCAPINTS ; i++) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } @@ -553,7 +554,7 @@ void __cpuinit detect_ht(struct cpuinfo_ if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1 ) { + } else if (smp_num_siblings > 1) { if (smp_num_siblings > NR_CPUS) { printk(KERN_WARNING "CPU: Unsupported number of the " @@ -563,7 +564,7 @@ void __cpuinit detect_ht(struct cpuinfo_ } index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); + c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id); @@ -574,7 +575,7 @@ void __cpuinit detect_ht(struct cpuinfo_ core_bits = get_count_order(c->x86_max_cores); - c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & + c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & ((1 << core_bits) - 1); if (c->x86_max_cores > 1) @@ -608,7 +609,7 @@ void __cpuinit print_cpu_info(struct cpu else printk("%s", c->x86_model_id); - if (c->x86_mask || c->cpuid_level >= 0) + if (c->x86_mask || c->cpuid_level >= 0) printk(" stepping %02x\n", c->x86_mask); else printk("\n"); @@ -627,24 +628,17 @@ __setup("clearcpuid=", setup_disablecpui cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; -/* This is hacky. :) - * We're emulating future behavior. - * In the future, the cpu-specific init functions will be called implicitly - * via the magic of initcalls. - * They will insert themselves into the cpu_devs structure. - * Then, when cpu_init() is called, we can just iterate over that array. - */ void __init early_cpu_init(void) { - intel_cpu_init(); - cyrix_init_cpu(); - nsc_init_cpu(); - amd_init_cpu(); - centaur_init_cpu(); - transmeta_init_cpu(); - nexgen_init_cpu(); - umc_init_cpu(); + struct cpu_vendor_dev *cvdev; + + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_detect(); + validate_pat_support(&boot_cpu_data); } /* Make sure %fs is initialized properly in idle threads */ @@ -689,7 +683,7 @@ void __cpuinit cpu_init(void) int cpu = smp_processor_id(); struct task_struct *curr = current; #ifndef CONFIG_X86_NO_TSS - struct tss_struct * t = &per_cpu(init_tss, cpu); + struct tss_struct *t = &per_cpu(init_tss, cpu); #endif struct thread_struct *thread = &curr->thread; @@ -742,7 +736,7 @@ void __cpuinit cpu_init(void) mxcsr_feature_mask_init(); } -#ifdef CONFIG_HOTPLUG_CPU +#if defined(CONFIG_HOTPLUG_CPU) && !defined(CONFIG_XEN) void __cpuinit cpu_uninit(void) { int cpu = raw_smp_processor_id(); --- head-2011-03-11.orig/arch/x86/kernel/cpu/mtrr/main-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/cpu/mtrr/main-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -35,6 +35,8 @@ struct mtrr_ops *mtrr_if = &generic_mtrr unsigned int num_var_ranges; unsigned int mtrr_usage_table[MAX_VAR_RANGES]; +static u64 tom2; + static void __init set_num_var_ranges(void) { struct xen_platform_op op; @@ -162,8 +164,144 @@ mtrr_del(int reg, unsigned long base, un EXPORT_SYMBOL(mtrr_add); EXPORT_SYMBOL(mtrr_del); +/* + * Returns the effective MTRR type for the region + * Error returns: + * - 0xFE - when the range is "not entirely covered" by _any_ var range MTRR + * - 0xFF - when MTRR is not enabled + */ +u8 mtrr_type_lookup(u64 start, u64 end) +{ + int i, error; + u64 start_mfn, end_mfn, base_mfn, top_mfn; + u8 prev_match, curr_match; + struct xen_platform_op op; + + if (!is_initial_xendomain()) + return MTRR_TYPE_WRBACK; + + if (!num_var_ranges) + return 0xFF; + + start_mfn = start >> PAGE_SHIFT; + /* Make end inclusive end, instead of exclusive */ + end_mfn = --end >> PAGE_SHIFT; + + /* Look in fixed ranges. Just return the type as per start */ + if (start_mfn < 0x100) { +#if 0//todo + op.cmd = XENPF_read_memtype; + op.u.read_memtype.reg = ???; + error = HYPERVISOR_platform_op(&op); + if (!error) + return op.u.read_memtype.type; +#endif + return MTRR_TYPE_UNCACHABLE; + } + + /* + * Look in variable ranges + * Look of multiple ranges matching this address and pick type + * as per MTRR precedence + */ + prev_match = 0xFF; + for (i = 0; i < num_var_ranges; ++i) { + op.cmd = XENPF_read_memtype; + op.u.read_memtype.reg = i; + error = HYPERVISOR_platform_op(&op); + + if (error || !op.u.read_memtype.nr_mfns) + continue; + + base_mfn = op.u.read_memtype.mfn; + top_mfn = base_mfn + op.u.read_memtype.nr_mfns - 1; + + if (base_mfn > end_mfn || start_mfn > top_mfn) { + continue; + } + + if (base_mfn > start_mfn || end_mfn > top_mfn) { + return 0xFE; + } + + curr_match = op.u.read_memtype.type; + if (prev_match == 0xFF) { + prev_match = curr_match; + continue; + } + + if (prev_match == MTRR_TYPE_UNCACHABLE || + curr_match == MTRR_TYPE_UNCACHABLE) { + return MTRR_TYPE_UNCACHABLE; + } + + if ((prev_match == MTRR_TYPE_WRBACK && + curr_match == MTRR_TYPE_WRTHROUGH) || + (prev_match == MTRR_TYPE_WRTHROUGH && + curr_match == MTRR_TYPE_WRBACK)) { + prev_match = MTRR_TYPE_WRTHROUGH; + curr_match = MTRR_TYPE_WRTHROUGH; + } + + if (prev_match != curr_match) { + return MTRR_TYPE_UNCACHABLE; + } + } + + if (tom2) { + if (start >= (1ULL<<32) && (end < tom2)) + return MTRR_TYPE_WRBACK; + } + + if (prev_match != 0xFF) + return prev_match; + +#if 0//todo + op.cmd = XENPF_read_def_memtype; + error = HYPERVISOR_platform_op(&op); + if (!error) + return op.u.read_def_memtype.type; +#endif + return MTRR_TYPE_UNCACHABLE; +} + +/* + * Newer AMD K8s and later CPUs have a special magic MSR way to force WB + * for memory >4GB. Check for that here. + * Note this won't check if the MTRRs < 4GB where the magic bit doesn't + * apply to are wrong, but so far we don't know of any such case in the wild. + */ +#define Tom2Enabled (1U << 21) +#define Tom2ForceMemTypeWB (1U << 22) + +int __init amd_special_default_mtrr(void) +{ + u32 l, h; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return 0; + if (boot_cpu_data.x86 < 0xf || boot_cpu_data.x86 > 0x11) + return 0; + /* In case some hypervisor doesn't pass SYSCFG through */ + if (rdmsr_safe(MSR_K8_SYSCFG, &l, &h) < 0) + return 0; + /* + * Memory between 4GB and top of mem is forced WB by this magic bit. + * Reserved before K8RevF, but should be zero there. + */ + if ((l & (Tom2Enabled | Tom2ForceMemTypeWB)) == + (Tom2Enabled | Tom2ForceMemTypeWB)) + return 1; + return 0; +} + void __init mtrr_bp_init(void) { + if (amd_special_default_mtrr()) { + /* TOP_MEM2 */ + rdmsrl(MSR_K8_TOP_MEM2, tom2); + tom2 &= 0xffffff8000000ULL; + } } void mtrr_ap_init(void) --- head-2011-03-11.orig/arch/x86/kernel/cpu/bugs.c 2010-08-02 00:11:14.000000000 +0200 +++ head-2011-03-11/arch/x86/kernel/cpu/bugs.c 2011-03-03 16:41:48.000000000 +0100 @@ -17,6 +17,7 @@ #include #include +#ifndef CONFIG_XEN static int __init no_halt(char *s) { boot_cpu_data.hlt_works_ok = 0; @@ -24,6 +25,7 @@ static int __init no_halt(char *s) } __setup("no-hlt", no_halt); +#endif static int __init no_387(char *s) { @@ -79,13 +81,16 @@ static void __init check_fpu(void) : "=m" (*&fdiv_bug) : "m" (*&x), "m" (*&y)); +#ifndef CONFIG_XEN boot_cpu_data.fdiv_bug = fdiv_bug; if (boot_cpu_data.fdiv_bug) printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n"); +#endif } static void __init check_hlt(void) { +#ifndef CONFIG_XEN if (boot_cpu_data.x86 >= 5 || paravirt_enabled()) return; @@ -99,6 +104,7 @@ static void __init check_hlt(void) halt(); halt(); printk(KERN_CONT "OK.\n"); +#endif } /* --- head-2011-03-11.orig/arch/x86/kernel/cpu/proc.c 2011-03-11 10:41:54.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/cpu/proc.c 2011-03-03 16:38:42.000000000 +0100 @@ -10,7 +10,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, unsigned int cpu) { -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && !defined(CONFIG_XEN) if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", @@ -32,18 +32,22 @@ static void show_cpuinfo_misc(struct seq */ int fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu); seq_printf(m, +#ifndef CONFIG_XEN "fdiv_bug\t: %s\n" "hlt_bug\t\t: %s\n" "f00f_bug\t: %s\n" "coma_bug\t: %s\n" +#endif "fpu\t\t: %s\n" "fpu_exception\t: %s\n" "cpuid level\t: %d\n" "wp\t\t: %s\n", +#ifndef CONFIG_XEN c->fdiv_bug ? "yes" : "no", c->hlt_works_ok ? "no" : "yes", c->f00f_bug ? "yes" : "no", c->coma_bug ? "yes" : "no", +#endif c->hard_math ? "yes" : "no", fpu_exception ? "yes" : "no", c->cpuid_level, --- head-2011-03-11.orig/arch/x86/kernel/e820_32-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/e820_32-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -469,7 +469,7 @@ int __init sanitize_e820_map(struct e820 * thinkpad 560x, for example, does not cooperate with the memory * detection code.) */ -int __init copy_e820_map(struct e820entry * biosmap, int nr_map) +int __init copy_e820_map(struct e820entry *biosmap, int nr_map) { #ifndef CONFIG_XEN /* Only one memory region (or negative)? Ignore it */ @@ -480,33 +480,17 @@ int __init copy_e820_map(struct e820entr #endif do { - unsigned long long start = biosmap->addr; - unsigned long long size = biosmap->size; - unsigned long long end = start + size; - unsigned long type = biosmap->type; + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; /* Overflow in 64 bits? Ignore the memory map. */ if (start > end) return -1; -#ifndef CONFIG_XEN - /* - * Some BIOSes claim RAM in the 640k - 1M region. - * Not right. Fix it up. - */ - if (type == E820_RAM) { - if (start < 0x100000ULL && end > 0xA0000ULL) { - if (start < 0xA0000ULL) - add_memory_region(start, 0xA0000ULL-start, type); - if (end <= 0x100000ULL) - continue; - start = 0x100000ULL; - size = end - start; - } - } -#endif add_memory_region(start, size, type); - } while (biosmap++,--nr_map); + } while (biosmap++, --nr_map); #ifdef CONFIG_XEN if (is_initial_xendomain()) { @@ -528,7 +512,7 @@ int __init copy_e820_map(struct e820entr /* * Find the highest page frame number we have available */ -void __init find_max_pfn(void) +void __init propagate_e820_map(void) { int i; @@ -801,7 +785,7 @@ static int __init parse_memmap(char *arg * size before original memory map is * reset. */ - find_max_pfn(); + propagate_e820_map(); saved_max_pfn = max_pfn; #endif e820.nr_map = 0; --- head-2011-03-11.orig/arch/x86/kernel/e820_64-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/e820_64-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -41,11 +41,11 @@ unsigned long end_pfn; #ifndef CONFIG_XEN /* - * end_pfn only includes RAM, while end_pfn_map includes all e820 entries. - * The direct mapping extends to end_pfn_map, so that we can directly access + * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. + * The direct mapping extends to max_pfn_mapped, so that we can directly access * apertures, ACPI and other tables without having to play with fixmaps. */ -unsigned long end_pfn_map; +unsigned long max_pfn_mapped; #endif /* @@ -65,8 +65,8 @@ struct early_res { static struct early_res early_res[MAX_EARLY_RES] __initdata = { #ifndef CONFIG_XEN { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_SMP - { SMP_TRAMPOLINE_BASE, SMP_TRAMPOLINE_BASE + 2*PAGE_SIZE, "SMP_TRAMPOLINE" }, +#ifdef CONFIG_X86_TRAMPOLINE + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, #endif #endif {} @@ -91,19 +91,47 @@ void __init reserve_early(unsigned long strncpy(r->name, name, sizeof(r->name) - 1); } -void __init early_res_to_bootmem(void) +void __init free_early(unsigned long start, unsigned long end) +{ + struct early_res *r; + int i, j; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (start == r->start && end == r->end) + break; + } + if (i >= MAX_EARLY_RES || !early_res[i].end) + panic("free_early on not reserved area: %lx-%lx!", start, end); + + for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) + ; + + memmove(&early_res[i], &early_res[i + 1], + (j - 1 - i) * sizeof(struct early_res)); + + early_res[j - 1].end = 0; +} + +void __init early_res_to_bootmem(unsigned long start, unsigned long end) { int i; + unsigned long final_start, final_end; for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { struct early_res *r = &early_res[i]; - printk(KERN_INFO "early res: %d [%lx-%lx] %s\n", i, - r->start, r->end - 1, r->name); - reserve_bootmem_generic(r->start, r->end - r->start); + final_start = max(start, r->start); + final_end = min(end, r->end); + if (final_start >= final_end) + continue; + printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, + final_start, final_end - 1, r->name); + reserve_bootmem_generic(final_start, final_end - final_start); } } /* Check for already reserved areas */ -static inline int bad_addr(unsigned long *addrp, unsigned long size) +static inline int __init +bad_addr(unsigned long *addrp, unsigned long size, unsigned long align) { int i; unsigned long addr = *addrp, last; @@ -113,7 +141,7 @@ again: for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { struct early_res *r = &early_res[i]; if (last >= r->start && addr < r->end) { - *addrp = addr = r->end; + *addrp = addr = round_up(r->end, align); changed = 1; goto again; } @@ -121,6 +149,40 @@ again: return changed; } +/* Check for already reserved areas */ +static inline int __init +bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align) +{ + int i; + unsigned long addr = *addrp, last; + unsigned long size = *sizep; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last > r->start && addr < r->start) { + size = r->start - addr; + changed = 1; + goto again; + } + if (last > r->end && addr < r->end) { + addr = round_up(r->end, align); + size = last - addr; + changed = 1; + goto again; + } + if (last <= r->end && addr >= r->start) { + (*sizep)++; + return 0; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} /* * This function checks if any part of the range is mapped * with type. @@ -196,26 +258,27 @@ int __init e820_all_mapped(unsigned long * Find a free area with specified alignment in a specific range. */ unsigned long __init find_e820_area(unsigned long start, unsigned long end, - unsigned size, unsigned long align) + unsigned long size, unsigned long align) { int i; - unsigned long mask = ~(align - 1); for (i = 0; i < e820.nr_map; i++) { struct e820entry *ei = &e820.map[i]; - unsigned long addr = ei->addr, last; + unsigned long addr, last; + unsigned long ei_last; if (ei->type != E820_RAM) continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; if (addr < start) - addr = start; - if (addr > ei->addr + ei->size) + addr = round_up(start, align); + if (addr >= ei_last) continue; - while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size) + while (bad_addr(&addr, size, align) && addr+size <= ei_last) ; - addr = (addr + align - 1) & mask; last = addr + size; - if (last > ei->addr + ei->size) + if (last > ei_last) continue; if (last > end) continue; @@ -225,6 +288,40 @@ unsigned long __init find_e820_area(unsi } /* + * Find next free range after *start + */ +unsigned long __init find_e820_area_size(unsigned long start, + unsigned long *sizep, + unsigned long align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long addr, last; + unsigned long ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (bad_addr_size(&addr, sizep, align) && + addr + *sizep <= ei_last) + ; + last = addr + *sizep; + if (last > ei_last) + continue; + return addr; + } + return -1UL; + +} +/* * Find the highest page frame number we have available */ unsigned long __init e820_end_of_ram(void) @@ -233,31 +330,29 @@ unsigned long __init e820_end_of_ram(voi end_pfn = find_max_pfn_with_active_regions(); - if (end_pfn > end_pfn_map) - end_pfn_map = end_pfn; - if (end_pfn_map > MAXMEM>>PAGE_SHIFT) - end_pfn_map = MAXMEM>>PAGE_SHIFT; + if (end_pfn > max_pfn_mapped) + max_pfn_mapped = end_pfn; + if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT) + max_pfn_mapped = MAXMEM>>PAGE_SHIFT; if (end_pfn > end_user_pfn) end_pfn = end_user_pfn; - if (end_pfn > end_pfn_map) - end_pfn = end_pfn_map; + if (end_pfn > max_pfn_mapped) + end_pfn = max_pfn_mapped; - printk(KERN_INFO "end_pfn_map = %lu\n", end_pfn_map); + printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped); return end_pfn; } /* * Mark e820 reserved areas as busy for the resource manager. */ -void __init e820_reserve_resources(struct e820entry *e820, int nr_map, - struct resource *code_resource, - struct resource *data_resource, - struct resource *bss_resource) +void __init e820_reserve_resources(struct e820entry *e820, int nr_map) { int i; + struct resource *res; + + res = alloc_bootmem_low(sizeof(struct resource) * nr_map); for (i = 0; i < nr_map; i++) { - struct resource *res; - res = alloc_bootmem_low(sizeof(struct resource)); switch (e820[i].type) { case E820_RAM: res->name = "System RAM"; break; case E820_ACPI: res->name = "ACPI Tables"; break; @@ -267,26 +362,8 @@ void __init e820_reserve_resources(struc res->start = e820[i].addr; res->end = res->start + e820[i].size - 1; res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - request_resource(&iomem_resource, res); - if (e820[i].type == E820_RAM) { - /* - * We don't know which RAM region contains kernel data, - * so we try it repeatedly and let the resource manager - * test it. - */ -#ifndef CONFIG_XEN - request_resource(res, code_resource); - request_resource(res, data_resource); - request_resource(res, bss_resource); -#endif -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - request_resource(res, &crashk_res); -#ifdef CONFIG_XEN - xen_machine_kexec_register_resources(res); -#endif -#endif - } + insert_resource(&iomem_resource, res); + res++; } } @@ -345,9 +422,9 @@ static int __init e820_find_active_regio if (*ei_startpfn >= *ei_endpfn) return 0; - /* Check if end_pfn_map should be updated */ - if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map) - end_pfn_map = *ei_endpfn; + /* Check if max_pfn_mapped should be updated */ + if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped) + max_pfn_mapped = *ei_endpfn; /* Skip if map is outside the node */ if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || @@ -678,10 +755,10 @@ static int __init copy_e820_map(struct e #endif do { - unsigned long start = biosmap->addr; - unsigned long size = biosmap->size; - unsigned long end = start + size; - unsigned long type = biosmap->type; + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; /* Overflow in 64 bits? Ignore the memory map. */ if (start > end) @@ -731,11 +808,7 @@ char * __init machine_specific_memory_se char *who = "Xen"; int rc; struct xen_memory_map memmap; - /* - * This is rather large for a stack variable but this early in - * the boot process we know we have plenty slack space. - */ - struct e820entry map[E820MAX]; + static struct e820entry __initdata map[E820MAX]; memmap.nr_entries = E820MAX; set_xen_guest_handle(memmap.buffer, map); @@ -812,7 +885,7 @@ static int __init parse_memmap_opt(char saved_max_pfn = e820_end_of_ram(); remove_all_active_ranges(); #endif - end_pfn_map = 0; + max_pfn_mapped = 0; e820.nr_map = 0; userdef = 1; return 0; --- head-2011-03-11.orig/arch/x86/kernel/early_printk-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/early_printk-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -13,7 +13,7 @@ #define VGABASE (__ISA_IO_base + 0xb8000) static int max_ypos = 25, max_xpos = 80; -static int current_ypos = 25, current_xpos = 0; +static int current_ypos = 25, current_xpos; static void early_vga_write(struct console *con, const char *str, unsigned n) { @@ -108,12 +108,12 @@ static __init void early_serial_init(cha if (*s) { unsigned port; - if (!strncmp(s,"0x",2)) { + if (!strncmp(s, "0x", 2)) { early_serial_base = simple_strtoul(s, &e, 16); } else { static int bases[] = { 0x3f8, 0x2f8 }; - if (!strncmp(s,"ttyS",4)) + if (!strncmp(s, "ttyS", 4)) s += 4; port = simple_strtoul(s, &e, 10); if (port > 1 || s == e) @@ -223,7 +223,7 @@ static struct console simnow_console = { /* Direct interface for emergencies */ static struct console *early_console = &early_vga_console; -static int early_console_initialized = 0; +static int early_console_initialized; void early_printk(const char *fmt, ...) { @@ -231,9 +231,9 @@ void early_printk(const char *fmt, ...) int n; va_list ap; - va_start(ap,fmt); - n = vscnprintf(buf,512,fmt,ap); - early_console->write(early_console,buf,n); + va_start(ap, fmt); + n = vscnprintf(buf, 512, fmt, ap); + early_console->write(early_console, buf, n); va_end(ap); } @@ -259,16 +259,16 @@ static int __init setup_early_printk(cha early_console = &early_serial_console; } else if (!strncmp(buf, "vga", 3)) { #ifndef CONFIG_XEN - && boot_params.screen_info.orig_video_isVGA == 1) { + && boot_params.screen_info.orig_video_isVGA == 1) { max_xpos = boot_params.screen_info.orig_video_cols; max_ypos = boot_params.screen_info.orig_video_lines; current_ypos = boot_params.screen_info.orig_y; #endif early_console = &early_vga_console; - } else if (!strncmp(buf, "simnow", 6)) { - simnow_init(buf + 6); - early_console = &simnow_console; - keep_early = 1; + } else if (!strncmp(buf, "simnow", 6)) { + simnow_init(buf + 6); + early_console = &simnow_console; + keep_early = 1; #ifdef CONFIG_XEN } else if (!strncmp(buf, "xen", 3)) { early_console = &xenboot_console; --- head-2011-03-11.orig/arch/x86/kernel/entry_32-xen.S 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/entry_32-xen.S 2011-01-31 18:07:35.000000000 +0100 @@ -1,5 +1,4 @@ /* - * linux/arch/i386/entry.S * * Copyright (C) 1991, 1992 Linus Torvalds */ @@ -51,6 +50,7 @@ #include #include #include +#include #include "irq_vectors.h" #include @@ -69,12 +69,6 @@ #define nr_syscalls ((syscall_table_size)/4) -CF_MASK = 0x00000001 -TF_MASK = 0x00000100 -IF_MASK = 0x00000200 -DF_MASK = 0x00000400 -NT_MASK = 0x00004000 -VM_MASK = 0x00020000 /* Pseudo-eflags. */ NMI_MASK = 0x80000000 @@ -87,7 +81,7 @@ NMI_MASK = 0x80000000 .macro TRACE_IRQS_IRET #ifdef CONFIG_TRACE_IRQFLAGS - testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off? + testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off? jz 1f TRACE_IRQS_ON 1: @@ -249,7 +243,7 @@ ret_from_intr: check_userspace: movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS movb PT_CS(%esp), %al - andl $(VM_MASK | SEGMENT_RPL_MASK), %eax + andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax cmpl $USER_RPL, %eax jb resume_kernel # not returning to v8086 or userspace @@ -258,6 +252,7 @@ ENTRY(resume_userspace) DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret + TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx andl $_TIF_WORK_MASK, %ecx # is there any work to be done on # int/exception return? @@ -274,7 +269,7 @@ need_resched: movl TI_flags(%ebp), %ecx # need_resched set ? testb $_TIF_NEED_RESCHED, %cl jz restore_all - testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ? + testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ? jz restore_all call preempt_schedule_irq jmp need_resched @@ -299,10 +294,10 @@ ENTRY(ia32_sysenter_target) movl SYSENTER_stack_sp0(%esp),%esp sysenter_past_esp: /* - * No need to follow this irqs on/off section: the syscall - * disabled irqs and here we enable it straight after entry: + * Interrupts are disabled here, but we can't trace it until + * enough kernel state to call TRACE_IRQS_OFF can be called - but + * we immediately enable interrupts at that point anyway. */ - ENABLE_INTERRUPTS(CLBR_NONE) pushl $(__USER_DS) CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET ss, 0*/ @@ -310,6 +305,7 @@ sysenter_past_esp: CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET esp, 0 pushfl + orl $X86_EFLAGS_IF, (%esp) CFI_ADJUST_CFA_OFFSET 4 pushl $(__USER_CS) CFI_ADJUST_CFA_OFFSET 4 @@ -323,6 +319,11 @@ sysenter_past_esp: CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET eip, 0 + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + ENABLE_INTERRUPTS(CLBR_NONE) + /* * Load the potential sixth argument from user stack. * Careful about security. @@ -330,14 +331,12 @@ sysenter_past_esp: cmpl $__PAGE_OFFSET-3,%ebp jae syscall_fault 1: movl (%ebp),%ebp + movl %ebp,PT_EBP(%esp) .section __ex_table,"a" .align 4 .long 1b,syscall_fault .previous - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL GET_THREAD_INFO(%ebp) test_tif %ebp jnz syscall_trace_entry @@ -414,7 +413,7 @@ syscall_exit: # setting need_resched or sigpending # between sampling and the iret TRACE_IRQS_OFF - testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit + testl $X86_EFLAGS_TF,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit jz no_singlestep orl $_TIF_SINGLESTEP,TI_flags(%ebp) no_singlestep: @@ -430,7 +429,7 @@ restore_all: # See comments in process.c:copy_thread() for details. movb PT_OLDSS(%esp), %ah movb PT_CS(%esp), %al - andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS @@ -438,7 +437,7 @@ restore_nocheck: #else restore_nocheck: movl PT_EFLAGS(%esp), %eax - testl $(VM_MASK|NMI_MASK), %eax + testl $(X86_EFLAGS_VM|NMI_MASK), %eax CFI_REMEMBER_STATE jnz hypervisor_iret shr $9, %eax # EAX[0] == IRET_EFLAGS.IF @@ -456,7 +455,7 @@ restore_nocheck_notrace: irq_return: INTERRUPT_RETURN .section .fixup,"ax" -iret_exc: +ENTRY(iret_exc) pushl $0 # no error code pushl $do_iret_error jmp error_code @@ -560,7 +559,7 @@ work_resched: work_notifysig: # deal with pending signals and # notify-resume requests #ifdef CONFIG_VM86 - testl $VM_MASK, PT_EFLAGS(%esp) + testl $X86_EFLAGS_VM, PT_EFLAGS(%esp) movl %esp, %eax jne work_notifysig_v86 # returning to kernel-space or # vm86-space @@ -617,9 +616,6 @@ END(syscall_exit_work) RING0_INT_FRAME # can't unwind into user space anyway syscall_fault: - pushl %eax # save orig_eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL GET_THREAD_INFO(%ebp) movl $-EFAULT,PT_EAX(%esp) jmp resume_userspace --- head-2011-03-11.orig/arch/x86/kernel/entry_64-xen.S 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/entry_64-xen.S 2011-01-31 18:07:35.000000000 +0100 @@ -331,19 +331,17 @@ badsys: /* Do syscall tracing */ tracesys: SAVE_REST - movq $-ENOSYS,RAX(%rsp) + movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ FIXUP_TOP_OF_STACK %rdi movq %rsp,%rdi call syscall_trace_enter LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST cmpq $__NR_syscall_max,%rax - movq $-ENOSYS,%rcx - cmova %rcx,%rax - ja 1f + ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */ movq %r10,%rcx /* fixup for C */ call *sys_call_table(,%rax,8) -1: movq %rax,RAX-ARGOFFSET(%rsp) + movq %rax,RAX-ARGOFFSET(%rsp) /* Use IRET because user could have changed frame */ /* --- head-2011-03-11.orig/arch/x86/kernel/head64-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/head64-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -29,6 +30,7 @@ #include #include #include +#include unsigned long start_pfn; @@ -75,34 +77,75 @@ EXPORT_SYMBOL(machine_to_phys_mapping); unsigned int machine_to_phys_order; EXPORT_SYMBOL(machine_to_phys_order); -#define EBDA_ADDR_POINTER 0x40E +#define BIOS_LOWMEM_KILOBYTES 0x413 -static __init void reserve_ebda(void) +/* + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. + */ +static void __init reserve_ebda_region(void) { #ifndef CONFIG_XEN - unsigned ebda_addr, ebda_size; + unsigned int lowmem, ebda_addr; - /* - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E - */ - ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER); - ebda_addr <<= 4; - - if (!ebda_addr) + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) return; - ebda_size = *(unsigned short *)__va(ebda_addr); + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; - /* Round EBDA up to pages */ - if (ebda_size == 0) - ebda_size = 1; - ebda_size <<= 10; - ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE); - if (ebda_size > 64*1024) - ebda_size = 64*1024; + /* reserve all memory between lowmem and the 1MB mark */ + reserve_early(lowmem, 0x100000, "BIOS reserved"); +#endif +} - reserve_early(ebda_addr, ebda_addr + ebda_size, "EBDA"); +static void __init reserve_setup_data(void) +{ +#ifndef CONFIG_XEN + struct setup_data *data; + unsigned long pa_data; + char buf[32]; + + if (boot_params.hdr.version < 0x0209) + return; + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = early_ioremap(pa_data, sizeof(*data)); + sprintf(buf, "setup data %x", data->type); + reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); + pa_data = data->next; + early_iounmap(data, sizeof(*data)); + } #endif } @@ -112,6 +155,19 @@ void __init x86_64_start_kernel(char * r unsigned long machine_to_phys_nr_ents; int i; + /* + * Build-time sanity checks on the kernel image and module + * area mappings. (these are purely build-time and produce no code) + */ + BUILD_BUG_ON(MODULES_VADDR < KERNEL_IMAGE_START); + BUILD_BUG_ON(MODULES_VADDR-KERNEL_IMAGE_START < KERNEL_IMAGE_SIZE); + BUILD_BUG_ON(MODULES_LEN + KERNEL_IMAGE_SIZE > 2*PUD_SIZE); + BUILD_BUG_ON((KERNEL_IMAGE_START & ~PMD_MASK) != 0); + BUILD_BUG_ON((MODULES_VADDR & ~PMD_MASK) != 0); + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == + (__START_KERNEL & PGDIR_MASK))); + xen_setup_features(); xen_start_info = (struct start_info *)real_mode_data; @@ -140,7 +196,7 @@ void __init x86_64_start_kernel(char * r /* Cleanup the over mapped high alias */ cleanup_highmap(); - for (i = 0; i < IDT_ENTRIES; i++) { + for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) { #ifdef CONFIG_EARLY_PRINTK set_intr_gate(i, &early_idt_handlers[i]); #else @@ -163,7 +219,8 @@ void __init x86_64_start_kernel(char * r reserve_early(round_up(__pa_symbol(&_end), PAGE_SIZE), start_pfn << PAGE_SHIFT, "Xen provided"); - reserve_ebda(); + reserve_ebda_region(); + reserve_setup_data(); /* * At this point everything still needed from the boot loader --- head-2011-03-11.orig/arch/x86/kernel/head_32-xen.S 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/head_32-xen.S 2011-01-31 18:07:35.000000000 +0100 @@ -69,7 +69,7 @@ ENTRY(startup_32) cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder - jmp start_kernel + jmp i386_start_kernel #define HYPERCALL_PAGE_OFFSET 0x1000 .org HYPERCALL_PAGE_OFFSET --- head-2011-03-11.orig/arch/x86/kernel/io_apic_32-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/io_apic_32-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -88,6 +88,16 @@ int sis_apic_bug = -1; */ int nr_ioapic_registers[MAX_IO_APICS]; +/* I/O APIC entries */ +struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +int nr_ioapics; + +/* MP IRQ source entries */ +struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + static int disable_timer_pin_1 __initdata; /* @@ -863,10 +873,7 @@ static int __init find_isa_irq_pin(int i for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA - ) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) @@ -882,10 +889,7 @@ static int __init find_isa_irq_apic(int for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].mpc_srcbus; - if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || - mp_bus_id_to_type[lbus] == MP_BUS_EISA || - mp_bus_id_to_type[lbus] == MP_BUS_MCA - ) && + if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].mpc_irqtype == type) && (mp_irqs[i].mpc_srcbusirq == irq)) break; @@ -926,7 +930,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; - if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && + if (!test_bit(lbus, mp_bus_not_pci) && !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { @@ -977,6 +981,7 @@ void __init setup_ioapic_dest(void) #endif /* !CONFIG_XEN */ #endif +#if defined(CONFIG_EISA) || defined(CONFIG_MCA) /* * EISA Edge/Level control register, ELCR */ @@ -990,6 +995,13 @@ static int EISA_ELCR(unsigned int irq) "Broken MPtable reports ISA irq %d\n", irq); return 0; } +#endif + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) /* EISA interrupts are always polarity zero and can be edge or level * trigger depending on the ELCR value. If an interrupt is listed as @@ -997,13 +1009,7 @@ static int EISA_ELCR(unsigned int irq) * be read in from the ELCR */ #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) -#define default_EISA_polarity(idx) (0) - -/* ISA interrupts are always polarity zero edge triggered, - * when listed as conforming in the MP table. */ - -#define default_ISA_trigger(idx) (0) -#define default_ISA_polarity(idx) (0) +#define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, * when listed as conforming in the MP table. */ @@ -1015,7 +1021,7 @@ static int EISA_ELCR(unsigned int irq) * when listed as conforming in the MP table. */ #define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) (0) +#define default_MCA_polarity(idx) default_ISA_polarity(idx) static int MPBIOS_polarity(int idx) { @@ -1029,35 +1035,9 @@ static int MPBIOS_polarity(int idx) { case 0: /* conforms, ie. bus-type dependent polarity */ { - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - polarity = default_ISA_polarity(idx); - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - polarity = default_EISA_polarity(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - polarity = default_PCI_polarity(idx); - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - polarity = default_MCA_polarity(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); break; } case 1: /* high active */ @@ -1098,11 +1078,15 @@ static int MPBIOS_trigger(int idx) { case 0: /* conforms, ie. bus-type dependent */ { + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); +#if defined(CONFIG_EISA) || defined(CONFIG_MCA) switch (mp_bus_id_to_type[bus]) { case MP_BUS_ISA: /* ISA pin */ { - trigger = default_ISA_trigger(idx); + /* set before the switch */ break; } case MP_BUS_EISA: /* EISA pin */ @@ -1112,7 +1096,7 @@ static int MPBIOS_trigger(int idx) } case MP_BUS_PCI: /* PCI pin */ { - trigger = default_PCI_trigger(idx); + /* set before the switch */ break; } case MP_BUS_MCA: /* MCA pin */ @@ -1127,6 +1111,7 @@ static int MPBIOS_trigger(int idx) break; } } +#endif break; } case 1: /* edge */ @@ -1176,39 +1161,22 @@ static int pin_2_irq(int idx, int apic, if (mp_irqs[idx].mpc_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - case MP_BUS_EISA: - case MP_BUS_MCA: - { - irq = mp_irqs[idx].mpc_srcbusirq; - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - - /* - * For MPS mode, so far only needed by ES7000 platform - */ - if (ioapic_renumber_irq) - irq = ioapic_renumber_irq(apic, irq); + if (test_bit(bus, mp_bus_not_pci)) + irq = mp_irqs[idx].mpc_srcbusirq; + else { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; - break; - } - default: - { - printk(KERN_ERR "unknown bus type %d.\n",bus); - irq = 0; - break; - } + /* + * For MPS mode, so far only needed by ES7000 platform + */ + if (ioapic_renumber_irq) + irq = ioapic_renumber_irq(apic, irq); } /* @@ -1314,7 +1282,6 @@ static void __init setup_IO_APIC_irqs(vo { struct IO_APIC_route_entry entry; int apic, pin, idx, irq, first_notcon = 1, vector; - unsigned long flags; apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); @@ -1380,9 +1347,7 @@ static void __init setup_IO_APIC_irqs(vo if (!apic && (irq < 16)) disable_8259A_irq(irq); } - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(apic, pin, entry); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); } } @@ -1577,8 +1542,8 @@ void /*__init*/ print_local_APIC(void * printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); - v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, + GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1791,7 +1756,7 @@ void disable_IO_APIC(void) entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); + GET_APIC_ID(read_apic_id()); /* * Add it to the IO-APIC irq-routing table: @@ -2090,8 +2055,7 @@ static inline void init_IO_APIC_traps(vo * 0x80, because int 0x80 is hm, kind of importantish. ;) */ for (irq = 0; irq < NR_IRQS ; irq++) { - int tmp = irq; - if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) { + if (IO_APIC_IRQ(irq) && !irq_vector[irq]) { /* * Hmm.. We don't have an entry for this, * so default to an old-fashioned 8259 @@ -2166,7 +2130,7 @@ static void __init setup_nmi(void) * cycles as some i82489DX-based boards have glue logic that keeps the * 8259A interrupt line asserted until INTA. --macro */ -static inline void unlock_ExtINT_logic(void) +static inline void __init unlock_ExtINT_logic(void) { int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; @@ -2218,8 +2182,6 @@ static inline void unlock_ExtINT_logic(v ioapic_write_entry(apic, pin, entry0); } -int timer_uses_ioapic_pin_0; - /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ @@ -2259,9 +2221,6 @@ static inline void __init check_timer(vo pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; - if (pin1 == 0) - timer_uses_ioapic_pin_0 = 1; - printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); @@ -2555,6 +2514,7 @@ void destroy_irq(unsigned int irq) dynamic_irq_cleanup(irq); spin_lock_irqsave(&vector_lock, flags); + clear_bit(irq_vector[irq], used_vectors); irq_vector[irq] = 0; spin_unlock_irqrestore(&vector_lock, flags); } @@ -2871,7 +2831,6 @@ int __init io_apic_get_redir_entries (in int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; - unsigned long flags; if (!IO_APIC_IRQ(irq)) { printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", @@ -2912,9 +2871,7 @@ int io_apic_set_pci_routing (int ioapic, if (!ioapic && (irq < 16)) disable_8259A_irq(irq); - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(ioapic, pin, entry); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(ioapic, pin, entry); return 0; } --- head-2011-03-11.orig/arch/x86/kernel/io_apic_64-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/io_apic_64-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -43,13 +43,15 @@ #include #include #include -#include #include #include #include #include #include +#include +#include + struct irq_cfg { #ifndef CONFIG_XEN cpumask_t domain; @@ -101,6 +103,16 @@ DEFINE_SPINLOCK(vector_lock); */ int nr_ioapic_registers[MAX_IO_APICS]; +/* I/O APIC entries */ +struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +int nr_ioapics; + +/* MP IRQ source entries */ +struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* # of MP IRQ source entries */ +int mp_irq_entries; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -181,11 +193,10 @@ static inline void io_apic_modify(unsign writel(value, &io_apic->data); } -static int io_apic_level_ack_pending(unsigned int irq) +static bool io_apic_level_ack_pending(unsigned int irq) { struct irq_pin_list *entry; unsigned long flags; - int pending = 0; spin_lock_irqsave(&ioapic_lock, flags); entry = irq_2_pin + irq; @@ -198,13 +209,17 @@ static int io_apic_level_ack_pending(uns break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - pending |= (reg >> 14) & 1; + if ((reg >> 14) & 1) { + spin_unlock_irqrestore(&ioapic_lock, flags); + return true; + } if (!entry->next) break; entry = irq_2_pin + entry->next; } spin_unlock_irqrestore(&ioapic_lock, flags); - return pending; + + return false; } #endif @@ -762,7 +777,7 @@ static void __clear_irq_vector(int irq) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; - cfg->domain = CPU_MASK_NONE; + cpus_clear(cfg->domain); } void __setup_vector_irq(int cpu) @@ -899,9 +914,8 @@ static void __init setup_IO_APIC_irqs(vo static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) { struct IO_APIC_route_entry entry; - unsigned long flags; - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); disable_8259A_irq(0); @@ -929,10 +943,7 @@ static void __init setup_ExtINT_IRQ0_pin /* * Add it to the IO-APIC irq-routing table: */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry); enable_8259A_irq(0); } @@ -1061,8 +1072,7 @@ void __apicdebuginit print_local_APIC(vo printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); - v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1260,7 +1270,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest = GET_APIC_ID(apic_read(APIC_ID)); + entry.dest = GET_APIC_ID(read_apic_id()); /* * Add it to the IO-APIC irq-routing table: @@ -1353,9 +1363,7 @@ static int ioapic_retrigger_irq(unsigned unsigned long flags; spin_lock_irqsave(&vector_lock, flags); - cpus_clear(mask); - cpu_set(first_cpu(cfg->domain), mask); - + mask = cpumask_of_cpu(first_cpu(cfg->domain)); send_IPI_mask(mask, cfg->vector); spin_unlock_irqrestore(&vector_lock, flags); @@ -1519,8 +1527,7 @@ static inline void init_IO_APIC_traps(vo * 0x80, because int 0x80 is hm, kind of importantish. ;) */ for (irq = 0; irq < NR_IRQS ; irq++) { - int tmp = irq; - if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) { + if (IO_APIC_IRQ(irq) && !irq_cfg[irq].vector) { /* * Hmm.. We don't have an entry for this, * so default to an old-fashioned 8259 @@ -1597,22 +1604,19 @@ static void __init setup_nmi(void) * cycles as some i82489DX-based boards have glue logic that keeps the * 8259A interrupt line asserted until INTA. --macro */ -static inline void unlock_ExtINT_logic(void) +static inline void __init unlock_ExtINT_logic(void) { int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; - unsigned long flags; pin = find_isa_irq_pin(8, mp_INT); apic = find_isa_irq_apic(8, mp_INT); if (pin == -1) return; - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); + entry0 = ioapic_read_entry(apic, pin); + clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); @@ -1625,10 +1629,7 @@ static inline void unlock_ExtINT_logic(v entry1.trigger = 0; entry1.vector = 0; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry1); save_control = CMOS_READ(RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); @@ -1647,10 +1648,7 @@ static inline void unlock_ExtINT_logic(v CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); clear_IO_APIC_pin(apic, pin); - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); + ioapic_write_entry(apic, pin, entry0); } /* @@ -2327,7 +2325,6 @@ static struct resource * __init ioapic_s res = (void *)mem; if (mem != NULL) { - memset(mem, 0, n); mem += sizeof(struct resource) * nr_ioapics; for (i = 0; i < nr_ioapics; i++) { --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ head-2011-03-11/arch/x86/kernel/apic/ipi-xen.c 2011-02-21 13:56:33.000000000 +0100 @@ -0,0 +1,63 @@ +#include +#include + +#include + +#ifdef CONFIG_X86_32 +#include + +DECLARE_PER_CPU(int, ipi_to_irq[NR_IPIS]); + +static inline void __send_IPI_one(unsigned int cpu, int vector) +{ + int irq = per_cpu(ipi_to_irq, cpu)[vector]; + BUG_ON(irq < 0); + notify_remote_via_irq(irq); +} + +void __send_IPI_shortcut(unsigned int shortcut, int vector) +{ + int cpu; + + switch (shortcut) { + case APIC_DEST_SELF: + __send_IPI_one(smp_processor_id(), vector); + break; + case APIC_DEST_ALLBUT: + for_each_online_cpu(cpu) + if (cpu != smp_processor_id()) + __send_IPI_one(cpu, vector); + break; + default: + printk("XXXXXX __send_IPI_shortcut %08x vector %d\n", shortcut, + vector); + break; + } +} + +void send_IPI_self(int vector) +{ + __send_IPI_shortcut(APIC_DEST_SELF, vector); +} + +void send_IPI_mask_bitmask(cpumask_t cpumask, int vector) +{ + cpumask_t mask; + unsigned int cpu; + + cpus_andnot(mask, cpumask, cpu_online_map); + WARN_ON(!cpus_empty(mask)); + for_each_online_cpu(cpu) + if (cpu_isset(cpu, cpumask)) + __send_IPI_one(cpu, vector); +} + +void send_IPI_mask_sequence(cpumask_t mask, int vector) +{ + send_IPI_mask_bitmask(mask, vector); +} + +/* must come after the send_IPI functions above for inlining */ +#include + +#endif --- head-2011-03-11.orig/arch/x86/kernel/machine_kexec_64.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/machine_kexec_64.c 2011-01-31 18:07:35.000000000 +0100 @@ -114,8 +114,6 @@ int __init machine_kexec_setup_resources return 0; } -void machine_kexec_register_resources(struct resource *res) { ; } - #else /* CONFIG_XEN */ #define x__pmd(x) __pmd(x) --- head-2011-03-11.orig/arch/x86/kernel/microcode-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/microcode-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -162,7 +162,7 @@ static int request_microcode(void) c->x86, c->x86_model, c->x86_mask); error = request_firmware(&firmware, name, µcode_pdev->dev); if (error) { - pr_debug("ucode data file %s load failed\n", name); + pr_debug("microcode: ucode data file %s load failed\n", name); return error; } --- head-2011-03-11.orig/arch/x86/kernel/mmconf-fam10h_64.c 2011-03-11 10:41:54.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/mmconf-fam10h_64.c 2011-01-31 18:07:35.000000000 +0100 @@ -205,12 +205,20 @@ void __cpuinit fam10h_check_enable_mmcfg return; } +#ifndef CONFIG_XEN printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); val &= ~((FAM10H_MMIO_CONF_BASE_MASK< + * (c) 1998, 1999, 2000 Ingo Molnar + * (c) 2008 Alexey Starikovskiy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#ifdef CONFIG_X86_32 +#include +#include +#endif + +/* Have we found an MP table */ +int smp_found_config; + +/* + * Various Linux-internal data structures created from the + * MP-table. + */ +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); +int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; + +static int mp_current_pci_id; + +int pic_mode; + +/* + * Intel MP BIOS table parsing routines: + */ + +/* + * Checksum an MP configuration block. + */ + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +#ifdef CONFIG_X86_NUMAQ +/* + * Have to match translation table entries to main table entries by counter + * hence the mpc_record variable .... can't see a less disgusting way of + * doing this .... + */ + +static int mpc_record; +static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] + __cpuinitdata; +#endif + +static void __cpuinit MP_processor_info(struct mpc_config_processor *m) +{ +#ifndef CONFIG_XEN + int apicid; + char *bootup_cpu = ""; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; + return; + } +#ifdef CONFIG_X86_NUMAQ + apicid = mpc_apic_id(m, translation_table[mpc_record]); +#else + apicid = m->mpc_apicid; +#endif + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + bootup_cpu = " (Bootup-CPU)"; + boot_cpu_physical_apicid = m->mpc_apicid; + } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + generic_processor_info(apicid, m->mpc_apicver); +#else /* CONFIG_XEN */ + num_processors++; +#endif +} + +static void __init MP_bus_info(struct mpc_config_bus *m) +{ + char str[7]; + + memcpy(str, m->mpc_bustype, 6); + str[6] = 0; + +#ifdef CONFIG_X86_NUMAQ + mpc_oem_bus_info(m, str, translation_table[mpc_record]); +#else + Dprintk("Bus #%d is %s\n", m->mpc_busid, str); +#endif + +#if MAX_MP_BUSSES < 256 + if (m->mpc_busid >= MAX_MP_BUSSES) { + printk(KERN_WARNING "MP table busid value (%d) for bustype %s " + " is too large, max. supported is %d\n", + m->mpc_busid, str, MAX_MP_BUSSES - 1); + return; + } +#endif + + if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { + set_bit(m->mpc_busid, mp_bus_not_pci); +#if defined(CONFIG_EISA) || defined (CONFIG_MCA) + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; +#endif + } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { +#ifdef CONFIG_X86_NUMAQ + mpc_oem_pci_bus(m, translation_table[mpc_record]); +#endif + clear_bit(m->mpc_busid, mp_bus_not_pci); + mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; + mp_current_pci_id++; +#if defined(CONFIG_EISA) || defined (CONFIG_MCA) + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; + } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; + } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; +#endif + } else + printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); +} + +#ifdef CONFIG_X86_IO_APIC + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +static void __init MP_ioapic_info(struct mpc_config_ioapic *m) +{ + if (!(m->mpc_flags & MPC_APIC_USABLE)) + return; + + printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); + + if (bad_ioapic(m->mpc_apicaddr)) + return; + + mp_ioapics[nr_ioapics] = *m; + nr_ioapics++; +} + +static void __init MP_intsrc_info(struct mpc_config_intsrc *m) +{ + mp_irqs[mp_irq_entries] = *m; + Dprintk("Int: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, + m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +#endif + +static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) +{ + Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); +} + +#ifdef CONFIG_X86_NUMAQ +static void __init MP_translation_info(struct mpc_config_translation *m) +{ + printk(KERN_INFO + "Translation: record %d, type %d, quad %d, global %d, local %d\n", + mpc_record, m->trans_type, m->trans_quad, m->trans_global, + m->trans_local); + + if (mpc_record >= MAX_MPC_ENTRY) + printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); + else + translation_table[mpc_record] = m; /* stash this for later */ + if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) + node_set_online(m->trans_quad); +} + +/* + * Read/parse the MPC oem tables + */ + +static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, + unsigned short oemsize) +{ + int count = sizeof(*oemtable); /* the header size */ + unsigned char *oemptr = ((unsigned char *)oemtable) + count; + + mpc_record = 0; + printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", + oemtable); + if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) { + printk(KERN_WARNING + "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", + oemtable->oem_signature[0], oemtable->oem_signature[1], + oemtable->oem_signature[2], oemtable->oem_signature[3]); + return; + } + if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) { + printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); + return; + } + while (count < oemtable->oem_length) { + switch (*oemptr) { + case MP_TRANSLATION: + { + struct mpc_config_translation *m = + (struct mpc_config_translation *)oemptr; + MP_translation_info(m); + oemptr += sizeof(*m); + count += sizeof(*m); + ++mpc_record; + break; + } + default: + { + printk(KERN_WARNING + "Unrecognised OEM table entry type! - %d\n", + (int)*oemptr); + return; + } + } + } +} + +static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (strncmp(oem, "IBM NUMA", 8)) + printk("Warning! May not be a NUMA-Q system!\n"); + if (mpc->mpc_oemptr) + smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr, + mpc->mpc_oemsize); +} +#endif /* CONFIG_X86_NUMAQ */ + +/* + * Read/parse the MPC + */ + +static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +{ + char str[16]; + char oem[10]; + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; + + if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) { + printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n", + mpc->mpc_signature[0], mpc->mpc_signature[1], + mpc->mpc_signature[2], mpc->mpc_signature[3]); + return 0; + } + if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) { + printk(KERN_ERR "MPTABLE: checksum error!\n"); + return 0; + } + if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) { + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", + mpc->mpc_spec); + return 0; + } + if (!mpc->mpc_lapic) { + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); + return 0; + } + memcpy(oem, mpc->mpc_oem, 8); + oem[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + + memcpy(str, mpc->mpc_productid, 12); + str[12] = 0; + printk("Product ID: %s ", str); + +#ifdef CONFIG_X86_32 + mps_oem_check(mpc, oem, str); +#endif + printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + +#ifndef CONFIG_XEN + printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); + + /* save the local APIC address, it might be non-default */ + if (!acpi_lapic) + mp_lapic_addr = mpc->mpc_lapic; +#endif + + if (early) + return 1; + + /* + * Now process the configuration blocks. + */ +#ifdef CONFIG_X86_NUMAQ + mpc_record = 0; +#endif + while (count < mpc->mpc_length) { + switch (*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m = + (struct mpc_config_processor *)mpt; + /* ACPI may have already provided this data */ + if (!acpi_lapic) + MP_processor_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m = + (struct mpc_config_bus *)mpt; + MP_bus_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_ioapic *m = + (struct mpc_config_ioapic *)mpt; + MP_ioapic_info(m); +#endif + mpt += sizeof(struct mpc_config_ioapic); + count += sizeof(struct mpc_config_ioapic); + break; + } + case MP_INTSRC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; + + MP_intsrc_info(m); +#endif + mpt += sizeof(struct mpc_config_intsrc); + count += sizeof(struct mpc_config_intsrc); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m = + (struct mpc_config_lintsrc *)mpt; + MP_lintsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + default: + /* wrong mptable */ + printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n"); + printk(KERN_ERR "type %x\n", *mpt); + print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16, + 1, mpc, mpc->mpc_length, 1); + count = mpc->mpc_length; + break; + } +#ifdef CONFIG_X86_NUMAQ + ++mpc_record; +#endif + } + setup_apic_routing(); + if (!num_processors) + printk(KERN_ERR "MPTABLE: no processors registered!\n"); + return num_processors; +} + +#ifdef CONFIG_X86_IO_APIC + +static int __init ELCR_trigger(unsigned int irq) +{ + unsigned int port; + + port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; +} + +static void __init construct_default_ioirq_mptable(int mpc_default_type) +{ + struct mpc_config_intsrc intsrc; + int i; + int ELCR_fallback = 0; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* conforming */ + intsrc.mpc_srcbus = 0; + intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + + intsrc.mpc_irqtype = mp_INT; + + /* + * If true, we have an ISA/PCI system with no IRQ entries + * in the MP table. To prevent the PCI interrupts from being set up + * incorrectly, we try to use the ELCR. The sanity check to see if + * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can + * never be level sensitive, so we simply see if the ELCR agrees. + * If it does, we assume it's valid. + */ + if (mpc_default_type == 5) { + printk(KERN_INFO "ISA/PCI bus type with no IRQ information... " + "falling back to ELCR\n"); + + if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || + ELCR_trigger(13)) + printk(KERN_ERR "ELCR contains invalid data... " + "not using ELCR\n"); + else { + printk(KERN_INFO + "Using ELCR to identify PCI interrupts\n"); + ELCR_fallback = 1; + } + } + + for (i = 0; i < 16; i++) { + switch (mpc_default_type) { + case 2: + if (i == 0 || i == 13) + continue; /* IRQ0 & IRQ13 not connected */ + /* fall through */ + default: + if (i == 2) + continue; /* IRQ2 is never connected */ + } + + if (ELCR_fallback) { + /* + * If the ELCR indicates a level-sensitive interrupt, we + * copy that information over to the MP table in the + * irqflag field (level sensitive, active high polarity). + */ + if (ELCR_trigger(i)) + intsrc.mpc_irqflag = 13; + else + intsrc.mpc_irqflag = 0; + } + + intsrc.mpc_srcbusirq = i; + intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ + MP_intsrc_info(&intsrc); + } + + intsrc.mpc_irqtype = mp_ExtINT; + intsrc.mpc_srcbusirq = 0; + intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ + MP_intsrc_info(&intsrc); +} + +#endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_bus bus; +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_ioapic ioapic; +#endif + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + +#ifndef CONFIG_XEN + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; +#endif + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + switch (mpc_default_type) { + default: + printk(KERN_ERR "???\nUnknown standard configuration %d\n", + mpc_default_type); + /* fall through */ + case 1: + case 5: + memcpy(bus.mpc_bustype, "ISA ", 6); + break; + case 2: + case 6: + case 3: + memcpy(bus.mpc_bustype, "EISA ", 6); + break; + case 4: + case 7: + memcpy(bus.mpc_bustype, "MCA ", 6); + } + MP_bus_info(&bus); + if (mpc_default_type > 4) { + bus.mpc_busid = 1; + memcpy(bus.mpc_bustype, "PCI ", 6); + MP_bus_info(&bus); + } + +#ifdef CONFIG_X86_IO_APIC + ioapic.mpc_type = MP_IOAPIC; + ioapic.mpc_apicid = 2; + ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.mpc_flags = MPC_APIC_USABLE; + ioapic.mpc_apicaddr = 0xFEC00000; + MP_ioapic_info(&ioapic); + + /* + * We set up most of the low 16 IO-APIC pins according to MPS rules. + */ + construct_default_ioirq_mptable(mpc_default_type); +#endif + lintsrc.mpc_type = MP_LINTSRC; + lintsrc.mpc_irqflag = 0; /* conforming */ + lintsrc.mpc_srcbusid = 0; + lintsrc.mpc_srcbusirq = 0; + lintsrc.mpc_destapic = MP_APIC_ALL; + for (i = 0; i < 2; i++) { + lintsrc.mpc_irqtype = linttypes[i]; + lintsrc.mpc_destapiclint = i; + MP_lintsrc_info(&lintsrc); + } +} + +static struct intel_mp_floating *mpf_found; + +/* + * Scan the memory blocks for an SMP configuration block. + */ +#ifndef CONFIG_XEN +static void __init __get_smp_config(unsigned early) +#else +void __init get_smp_config(void) +#define early 0 +#endif +{ + struct intel_mp_floating *mpf = mpf_found; + + if (acpi_lapic && early) + return; + /* + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration " + "information\n"); + return; + } else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) " + "configuration information\n"); + + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", + mpf->mpf_specification); +#ifdef CONFIG_X86_32 + if (mpf->mpf_feature2 & (1 << 7)) { + printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); + pic_mode = 1; + } else { + printk(KERN_INFO " Virtual Wire compatibility mode.\n"); + pic_mode = 0; + } +#endif + /* + * Now see if we need to read further. + */ + if (mpf->mpf_feature1 != 0) { +#ifndef CONFIG_XEN + if (early) { + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + return; + } +#endif + + printk(KERN_INFO "Default MP configuration #%d\n", + mpf->mpf_feature1); + construct_default_ISA_mptable(mpf->mpf_feature1); + + } else if (mpf->mpf_physptr) { + + /* + * Read the physical hardware table. Anything here will + * override the defaults. + */ + if (!smp_read_mpc(isa_bus_to_virt(mpf->mpf_physptr), early)) { + smp_found_config = 0; + printk(KERN_ERR + "BIOS bug, MP table errors detected!...\n"); + printk(KERN_ERR "... disabling SMP support. " + "(tell your hw vendor)\n"); + return; + } + + if (early) + return; +#ifdef CONFIG_X86_IO_APIC + /* + * If there are no explicit MP IRQ entries, then we are + * broken. We set up most of the low 16 IO-APIC pins to + * ISA defaults and hope it will work. + */ + if (!mp_irq_entries) { + struct mpc_config_bus bus; + + printk(KERN_ERR "BIOS bug, no explicit IRQ entries, " + "using default mptable. " + "(tell your hw vendor)\n"); + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + memcpy(bus.mpc_bustype, "ISA ", 6); + MP_bus_info(&bus); + + construct_default_ioirq_mptable(0); + } +#endif + } else + BUG(); + + if (!early) + printk(KERN_INFO "Processors: %d\n", num_processors); + /* + * Only use the first configuration found. + */ +#undef early +} + +#ifndef CONFIG_XEN +void __init early_get_smp_config(void) +{ + __get_smp_config(1); +} + +void __init get_smp_config(void) +{ + __get_smp_config(0); +} +#endif + +static int __init smp_scan_config(unsigned long base, unsigned long length, + unsigned reserve) +{ + unsigned int *bp = isa_bus_to_virt(base); + struct intel_mp_floating *mpf; + + Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + BUILD_BUG_ON(sizeof(*mpf) != 16); + + while (length > 0) { + mpf = (struct intel_mp_floating *)bp; + if ((*bp == SMP_MAGIC_IDENT) && + (mpf->mpf_length == 1) && + !mpf_checksum((unsigned char *)bp, 16) && + ((mpf->mpf_specification == 1) + || (mpf->mpf_specification == 4))) { + + smp_found_config = 1; + mpf_found = mpf; +#ifdef CONFIG_X86_32 +#ifndef CONFIG_XEN + printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", + mpf, virt_to_phys(mpf)); + reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, + BOOTMEM_DEFAULT); + if (mpf->mpf_physptr) { + /* + * We cannot access to MPC table to compute + * table size yet, as only few megabytes from + * the bottom is mapped now. + * PC-9800's MPC table places on the very last + * of physical memory; so that simply reserving + * PAGE_SIZE from mpg->mpf_physptr yields BUG() + * in reserve_bootmem. + */ + unsigned long size = PAGE_SIZE; + unsigned long end = max_low_pfn * PAGE_SIZE; + if (mpf->mpf_physptr + size > end) + size = end - mpf->mpf_physptr; + reserve_bootmem(mpf->mpf_physptr, size, + BOOTMEM_DEFAULT); + } +#else + printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", + mpf, ((void *)bp - isa_bus_to_virt(base)) + base); +#endif +#elif !defined(CONFIG_XEN) + if (!reserve) + return 1; + + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + if (mpf->mpf_physptr) + reserve_bootmem_generic(mpf->mpf_physptr, + PAGE_SIZE); +#endif + return 1; + } + bp += 4; + length -= 16; + } + return 0; +} + +static void __init __find_smp_config(unsigned reserve) +{ +#ifndef CONFIG_XEN + unsigned int address; +#endif + + /* + * FIXME: Linux assumes you have 640K of base ram.. + * this continues the error... + * + * 1) Scan the bottom 1K for a signature + * 2) Scan the top 1K of base RAM + * 3) Scan the 64K of bios + */ + if (smp_scan_config(0x0, 0x400, reserve) || + smp_scan_config(639 * 0x400, 0x400, reserve) || + smp_scan_config(0xF0000, 0x10000, reserve)) + return; + /* + * If it is an SMP machine we should know now, unless the + * configuration is in an EISA/MCA bus machine with an + * extended bios data area. + * + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E, calculate and scan it here. + * + * NOTE! There are Linux loaders that will corrupt the EBDA + * area, and as such this kind of SMP config may be less + * trustworthy, simply because the SMP table may have been + * stomped on during early boot. These loaders are buggy and + * should be fixed. + * + * MP1.4 SPEC states to only scan first 1K of 4K EBDA. + */ + +#ifndef CONFIG_XEN + address = get_bios_ebda(); + if (address) + smp_scan_config(address, 0x400, reserve); +#endif +} + +void __init early_find_smp_config(void) +{ + __find_smp_config(0); +} + +void __init find_smp_config(void) +{ + __find_smp_config(1); +} + +/* -------------------------------------------------------------------------- + ACPI-based MP Configuration + -------------------------------------------------------------------------- */ + +/* + * Keep this outside and initialized to 0, for !CONFIG_ACPI builds: + */ +int es7000_plat; + +#ifdef CONFIG_ACPI + +#ifdef CONFIG_X86_IO_APIC + +#define MP_ISA_BUS 0 + +extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 +#ifndef CONFIG_XEN + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else +#endif + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + +#ifndef CONFIG_XEN + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); +#endif + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + struct mpc_config_intsrc intsrc; + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (trigger << 2) | polarity; + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + intsrc.mpc_dstirq = pin; /* INTIN# */ + + MP_intsrc_info(&intsrc); +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + struct mpc_config_intsrc intsrc; + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* Conforming */ + intsrc.mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_srcbusirq = i; /* Identity mapped */ + intsrc.mpc_dstirq = i; + + MP_intsrc_info(&intsrc); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#if defined(CONFIG_X86_32) && !defined(CONFIG_XEN) +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifndef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#if defined(CONFIG_X86_32) && !defined(CONFIG_XEN) + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#if defined(CONFIG_X86_32) && !defined(CONFIG_XEN) + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ --- head-2011-03-11.orig/arch/x86/kernel/mpparse_32-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,1163 +0,0 @@ -/* - * Intel Multiprocessor Specification 1.1 and 1.4 - * compliant MP-table parsing routines. - * - * (c) 1995 Alan Cox, Building #3 - * (c) 1998, 1999, 2000 Ingo Molnar - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Have we found an MP table */ -int smp_found_config; -unsigned int __cpuinitdata maxcpus = NR_CPUS; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -int apic_version [MAX_APICS]; -int mp_bus_id_to_type [MAX_MP_BUSSES]; -int mp_bus_id_to_node [MAX_MP_BUSSES]; -int mp_bus_id_to_local [MAX_MP_BUSSES]; -int quad_local_to_mp_bus_id [NR_CPUS/4][4]; -int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; -static int mp_current_pci_id; - -/* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; - -/* # of MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* MP IRQ source entries */ -int mp_irq_entries; - -int nr_ioapics; - -int pic_mode; -unsigned long mp_lapic_addr; - -unsigned int def_to_bigsmp = 0; - -#ifndef CONFIG_XEN -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; -#endif -/* Internal processor count */ -unsigned int num_processors; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; - -u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; - -/* - * Intel MP BIOS table parsing routines: - */ - - -/* - * Checksum an MP configuration block. - */ - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -/* - * Have to match translation table entries to main table entries by counter - * hence the mpc_record variable .... can't see a less disgusting way of - * doing this .... - */ - -static int mpc_record; -static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata; - -#ifndef CONFIG_XEN -static void __cpuinit MP_processor_info (struct mpc_config_processor *m) -{ - int ver, apicid; - physid_mask_t phys_cpu; - - if (!(m->mpc_cpuflag & CPU_ENABLED)) - return; - - apicid = mpc_apic_id(m, translation_table[mpc_record]); - - if (m->mpc_featureflag&(1<<0)) - Dprintk(" Floating point unit present.\n"); - if (m->mpc_featureflag&(1<<7)) - Dprintk(" Machine Exception supported.\n"); - if (m->mpc_featureflag&(1<<8)) - Dprintk(" 64 bit compare & exchange supported.\n"); - if (m->mpc_featureflag&(1<<9)) - Dprintk(" Internal APIC present.\n"); - if (m->mpc_featureflag&(1<<11)) - Dprintk(" SEP present.\n"); - if (m->mpc_featureflag&(1<<12)) - Dprintk(" MTRR present.\n"); - if (m->mpc_featureflag&(1<<13)) - Dprintk(" PGE present.\n"); - if (m->mpc_featureflag&(1<<14)) - Dprintk(" MCA present.\n"); - if (m->mpc_featureflag&(1<<15)) - Dprintk(" CMOV present.\n"); - if (m->mpc_featureflag&(1<<16)) - Dprintk(" PAT present.\n"); - if (m->mpc_featureflag&(1<<17)) - Dprintk(" PSE present.\n"); - if (m->mpc_featureflag&(1<<18)) - Dprintk(" PSN present.\n"); - if (m->mpc_featureflag&(1<<19)) - Dprintk(" Cache Line Flush Instruction present.\n"); - /* 20 Reserved */ - if (m->mpc_featureflag&(1<<21)) - Dprintk(" Debug Trace and EMON Store present.\n"); - if (m->mpc_featureflag&(1<<22)) - Dprintk(" ACPI Thermal Throttle Registers present.\n"); - if (m->mpc_featureflag&(1<<23)) - Dprintk(" MMX present.\n"); - if (m->mpc_featureflag&(1<<24)) - Dprintk(" FXSR present.\n"); - if (m->mpc_featureflag&(1<<25)) - Dprintk(" XMM present.\n"); - if (m->mpc_featureflag&(1<<26)) - Dprintk(" Willamette New Instructions present.\n"); - if (m->mpc_featureflag&(1<<27)) - Dprintk(" Self Snoop present.\n"); - if (m->mpc_featureflag&(1<<28)) - Dprintk(" HT present.\n"); - if (m->mpc_featureflag&(1<<29)) - Dprintk(" Thermal Monitor present.\n"); - /* 30, 31 Reserved */ - - - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - Dprintk(" Bootup CPU\n"); - boot_cpu_physical_apicid = m->mpc_apicid; - } - - ver = m->mpc_apicver; - - /* - * Validate version - */ - if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - m->mpc_apicid); - ver = 0x10; - } - apic_version[m->mpc_apicid] = ver; - - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - - cpu_set(num_processors, cpu_possible_map); - num_processors++; - - /* - * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y - * but we need to work other dependencies like SMP_SUSPEND etc - * before this can be done without some confusion. - * if (CPU_HOTPLUG_ENABLED || num_processors > 8) - * - Ashok Raj - */ - if (num_processors > 8) { - switch (boot_cpu_data.x86_vendor) { - case X86_VENDOR_INTEL: - if (!APIC_XAPIC(ver)) { - def_to_bigsmp = 0; - break; - } - /* If P4 and above fall through */ - case X86_VENDOR_AMD: - def_to_bigsmp = 1; - } - } - bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; -} -#else -static void __cpuinit MP_processor_info (struct mpc_config_processor *m) -{ - num_processors++; -} -#endif /* CONFIG_XEN */ - -static void __init MP_bus_info (struct mpc_config_bus *m) -{ - char str[7]; - - memcpy(str, m->mpc_bustype, 6); - str[6] = 0; - - mpc_oem_bus_info(m, str, translation_table[mpc_record]); - -#if MAX_MP_BUSSES < 256 - if (m->mpc_busid >= MAX_MP_BUSSES) { - printk(KERN_WARNING "MP table busid value (%d) for bustype %s " - " is too large, max. supported is %d\n", - m->mpc_busid, str, MAX_MP_BUSSES - 1); - return; - } -#endif - - if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; - } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; - } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) { - mpc_oem_pci_bus(m, translation_table[mpc_record]); - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; - } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) { - mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; - } else { - printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); - } -} - -static void __init MP_ioapic_info (struct mpc_config_ioapic *m) -{ - if (!(m->mpc_flags & MPC_APIC_USABLE)) - return; - - printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n", - m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n", - MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); - } - if (!m->mpc_apicaddr) { - printk(KERN_ERR "WARNING: bogus zero I/O APIC address" - " found in MP table, skipping!\n"); - return; - } - mp_ioapics[nr_ioapics] = *m; - nr_ioapics++; -} - -static void __init MP_intsrc_info (struct mpc_config_intsrc *m) -{ - mp_irqs [mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, - m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - -static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) -{ - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); -} - -#ifdef CONFIG_X86_NUMAQ -static void __init MP_translation_info (struct mpc_config_translation *m) -{ - printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local); - - if (mpc_record >= MAX_MPC_ENTRY) - printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); - else - translation_table[mpc_record] = m; /* stash this for later */ - if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) - node_set_online(m->trans_quad); -} - -/* - * Read/parse the MPC oem tables - */ - -static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \ - unsigned short oemsize) -{ - int count = sizeof (*oemtable); /* the header size */ - unsigned char *oemptr = ((unsigned char *)oemtable)+count; - - mpc_record = 0; - printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable); - if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4)) - { - printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", - oemtable->oem_signature[0], - oemtable->oem_signature[1], - oemtable->oem_signature[2], - oemtable->oem_signature[3]); - return; - } - if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length)) - { - printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); - return; - } - while (count < oemtable->oem_length) { - switch (*oemptr) { - case MP_TRANSLATION: - { - struct mpc_config_translation *m= - (struct mpc_config_translation *)oemptr; - MP_translation_info(m); - oemptr += sizeof(*m); - count += sizeof(*m); - ++mpc_record; - break; - } - default: - { - printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr); - return; - } - } - } -} - -static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid) -{ - if (strncmp(oem, "IBM NUMA", 8)) - printk("Warning! May not be a NUMA-Q system!\n"); - if (mpc->mpc_oemptr) - smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr, - mpc->mpc_oemsize); -} -#endif /* CONFIG_X86_NUMAQ */ - -/* - * Read/parse the MPC - */ - -static int __init smp_read_mpc(struct mp_config_table *mpc) -{ - char str[16]; - char oem[10]; - int count=sizeof(*mpc); - unsigned char *mpt=((unsigned char *)mpc)+count; - - if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n", - *(u32 *)mpc->mpc_signature); - return 0; - } - if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk(KERN_ERR "SMP mptable: checksum error!\n"); - return 0; - } - if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n", - mpc->mpc_spec); - return 0; - } - if (!mpc->mpc_lapic) { - printk(KERN_ERR "SMP mptable: null local APIC address!\n"); - return 0; - } - memcpy(oem,mpc->mpc_oem,8); - oem[8]=0; - printk(KERN_INFO "OEM ID: %s ",oem); - - memcpy(str,mpc->mpc_productid,12); - str[12]=0; - printk("Product ID: %s ",str); - - mps_oem_check(mpc, oem, str); - - printk("APIC at: 0x%X\n", mpc->mpc_lapic); - - /* - * Save the local APIC address (it might be non-default) -- but only - * if we're not using ACPI. - */ - if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; - - /* - * Now process the configuration blocks. - */ - mpc_record = 0; - while (count < mpc->mpc_length) { - switch(*mpt) { - case MP_PROCESSOR: - { - struct mpc_config_processor *m= - (struct mpc_config_processor *)mpt; - /* ACPI may have already provided this data */ - if (!acpi_lapic) - MP_processor_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_BUS: - { - struct mpc_config_bus *m= - (struct mpc_config_bus *)mpt; - MP_bus_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_IOAPIC: - { - struct mpc_config_ioapic *m= - (struct mpc_config_ioapic *)mpt; - MP_ioapic_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - case MP_INTSRC: - { - struct mpc_config_intsrc *m= - (struct mpc_config_intsrc *)mpt; - - MP_intsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - case MP_LINTSRC: - { - struct mpc_config_lintsrc *m= - (struct mpc_config_lintsrc *)mpt; - MP_lintsrc_info(m); - mpt+=sizeof(*m); - count+=sizeof(*m); - break; - } - default: - { - count = mpc->mpc_length; - break; - } - } - ++mpc_record; - } - setup_apic_routing(); - if (!num_processors) - printk(KERN_ERR "SMP mptable: no processors registered!\n"); - return num_processors; -} - -static int __init ELCR_trigger(unsigned int irq) -{ - unsigned int port; - - port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; -} - -static void __init construct_default_ioirq_mptable(int mpc_default_type) -{ - struct mpc_config_intsrc intsrc; - int i; - int ELCR_fallback = 0; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* conforming */ - intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; - - intsrc.mpc_irqtype = mp_INT; - - /* - * If true, we have an ISA/PCI system with no IRQ entries - * in the MP table. To prevent the PCI interrupts from being set up - * incorrectly, we try to use the ELCR. The sanity check to see if - * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can - * never be level sensitive, so we simply see if the ELCR agrees. - * If it does, we assume it's valid. - */ - if (mpc_default_type == 5) { - printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); - - if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) - printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n"); - else { - printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); - ELCR_fallback = 1; - } - } - - for (i = 0; i < 16; i++) { - switch (mpc_default_type) { - case 2: - if (i == 0 || i == 13) - continue; /* IRQ0 & IRQ13 not connected */ - /* fall through */ - default: - if (i == 2) - continue; /* IRQ2 is never connected */ - } - - if (ELCR_fallback) { - /* - * If the ELCR indicates a level-sensitive interrupt, we - * copy that information over to the MP table in the - * irqflag field (level sensitive, active high polarity). - */ - if (ELCR_trigger(i)) - intsrc.mpc_irqflag = 13; - else - intsrc.mpc_irqflag = 0; - } - - intsrc.mpc_srcbusirq = i; - intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); - } - - intsrc.mpc_irqtype = mp_ExtINT; - intsrc.mpc_srcbusirq = 0; - intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); -} - -static inline void __init construct_default_ISA_mptable(int mpc_default_type) -{ - struct mpc_config_processor processor; - struct mpc_config_bus bus; - struct mpc_config_ioapic ioapic; - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | - boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - switch (mpc_default_type) { - default: - printk("???\n"); - printk(KERN_ERR "Unknown standard configuration %d\n", - mpc_default_type); - /* fall through */ - case 1: - case 5: - memcpy(bus.mpc_bustype, "ISA ", 6); - break; - case 2: - case 6: - case 3: - memcpy(bus.mpc_bustype, "EISA ", 6); - break; - case 4: - case 7: - memcpy(bus.mpc_bustype, "MCA ", 6); - } - MP_bus_info(&bus); - if (mpc_default_type > 4) { - bus.mpc_busid = 1; - memcpy(bus.mpc_bustype, "PCI ", 6); - MP_bus_info(&bus); - } - - ioapic.mpc_type = MP_IOAPIC; - ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - ioapic.mpc_flags = MPC_APIC_USABLE; - ioapic.mpc_apicaddr = 0xFEC00000; - MP_ioapic_info(&ioapic); - - /* - * We set up most of the low 16 IO-APIC pins according to MPS rules. - */ - construct_default_ioirq_mptable(mpc_default_type); - - lintsrc.mpc_type = MP_LINTSRC; - lintsrc.mpc_irqflag = 0; /* conforming */ - lintsrc.mpc_srcbusid = 0; - lintsrc.mpc_srcbusirq = 0; - lintsrc.mpc_destapic = MP_APIC_ALL; - for (i = 0; i < 2; i++) { - lintsrc.mpc_irqtype = linttypes[i]; - lintsrc.mpc_destapiclint = i; - MP_lintsrc_info(&lintsrc); - } -} - -static struct intel_mp_floating *mpf_found; - -/* - * Scan the memory blocks for an SMP configuration block. - */ -void __init get_smp_config (void) -{ - struct intel_mp_floating *mpf = mpf_found; - - /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); - return; - } - else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); - - printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - if (mpf->mpf_feature2 & (1<<7)) { - printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); - pic_mode = 1; - } else { - printk(KERN_INFO " Virtual Wire compatibility mode.\n"); - pic_mode = 0; - } - - /* - * Now see if we need to read further. - */ - if (mpf->mpf_feature1 != 0) { - - printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); - - } else if (mpf->mpf_physptr) { - - /* - * Read the physical hardware table. Anything here will - * override the defaults. - */ - if (!smp_read_mpc(isa_bus_to_virt(mpf->mpf_physptr))) { - smp_found_config = 0; - printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); - printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); - return; - } - /* - * If there are no explicit MP IRQ entries, then we are - * broken. We set up most of the low 16 IO-APIC pins to - * ISA defaults and hope it will work. - */ - if (!mp_irq_entries) { - struct mpc_config_bus bus; - - printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - memcpy(bus.mpc_bustype, "ISA ", 6); - MP_bus_info(&bus); - - construct_default_ioirq_mptable(0); - } - - } else - BUG(); - - printk(KERN_INFO "Processors: %d\n", num_processors); - /* - * Only use the first configuration found. - */ -} - -static int __init smp_scan_config (unsigned long base, unsigned long length) -{ - unsigned long *bp = isa_bus_to_virt(base); - struct intel_mp_floating *mpf; - - printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp,length); - if (sizeof(*mpf) != 16) - printk("Error: MPF size\n"); - - while (length > 0) { - mpf = (struct intel_mp_floating *)bp; - if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && - !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4)) ) { - - smp_found_config = 1; -#ifndef CONFIG_XEN - printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", - mpf, virt_to_phys(mpf)); - reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, - BOOTMEM_DEFAULT); - if (mpf->mpf_physptr) { - /* - * We cannot access to MPC table to compute - * table size yet, as only few megabytes from - * the bottom is mapped now. - * PC-9800's MPC table places on the very last - * of physical memory; so that simply reserving - * PAGE_SIZE from mpg->mpf_physptr yields BUG() - * in reserve_bootmem. - */ - unsigned long size = PAGE_SIZE; - unsigned long end = max_low_pfn * PAGE_SIZE; - if (mpf->mpf_physptr + size > end) - size = end - mpf->mpf_physptr; - reserve_bootmem(mpf->mpf_physptr, size, - BOOTMEM_DEFAULT); - } -#else - printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", - mpf, ((void *)bp - isa_bus_to_virt(base)) + base); -#endif - - mpf_found = mpf; - return 1; - } - bp += 4; - length -= 16; - } - return 0; -} - -void __init find_smp_config (void) -{ -#ifndef CONFIG_XEN - unsigned int address; -#endif - - /* - * FIXME: Linux assumes you have 640K of base ram.. - * this continues the error... - * - * 1) Scan the bottom 1K for a signature - * 2) Scan the top 1K of base RAM - * 3) Scan the 64K of bios - */ - if (smp_scan_config(0x0,0x400) || - smp_scan_config(639*0x400,0x400) || - smp_scan_config(0xF0000,0x10000)) - return; - /* - * If it is an SMP machine we should know now, unless the - * configuration is in an EISA/MCA bus machine with an - * extended bios data area. - * - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E, calculate and scan it here. - * - * NOTE! There are Linux loaders that will corrupt the EBDA - * area, and as such this kind of SMP config may be less - * trustworthy, simply because the SMP table may have been - * stomped on during early boot. These loaders are buggy and - * should be fixed. - * - * MP1.4 SPEC states to only scan first 1K of 4K EBDA. - */ - -#ifndef CONFIG_XEN - address = get_bios_ebda(); - if (address) - smp_scan_config(address, 0x400); -#endif -} - -int es7000_plat; - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -void __init mp_register_lapic_address(u64 address) -{ -#ifndef CONFIG_XEN - mp_lapic_addr = (unsigned long) address; - - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); - - Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); -#endif -} - -void __cpuinit mp_register_lapic (u8 id, u8 enabled) -{ - struct mpc_config_processor processor; -#ifndef CONFIG_XEN - int boot_cpu = 0; - - if (MAX_APICS - id <= 0) { - printk(KERN_WARNING "Processor #%d invalid (max %d)\n", - id, MAX_APICS); - return; - } - - if (id == boot_cpu_physical_apicid) - boot_cpu = 1; - - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicid = id; - processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); - processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); - processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; -#endif - - MP_processor_info(&processor); -} - -#ifdef CONFIG_X86_IO_APIC - -#define MP_ISA_BUS 0 -#define MP_MAX_IOAPIC_PIN 127 - -static struct mp_ioapic_routing { - int apic_id; - int gsi_base; - int gsi_end; - u32 pin_programmed[4]; -} mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic (int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - - return -1; -} - -void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) -{ - int idx = 0; - int tmpid; - - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in MADT table, skipping!\n"); - return; - } - - idx = nr_ioapics++; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - -#ifndef CONFIG_XEN - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - tmpid = io_apic_get_unique_id(idx, id); - else -#endif - tmpid = id; - if (tmpid == -1) { - nr_ioapics--; - return; - } - mp_ioapics[idx].mpc_apicid = tmpid; - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); - - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, - mp_ioapic_routing[idx].gsi_end); -} - -void __init -mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", - intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); -} - -void __init mp_config_acpi_legacy_irqs (void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; - - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " - "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, - intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); - } -} - -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - bit = ioapic_pin % 32; - idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); - if (idx > 3) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if ((1<= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } - - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ --- head-2011-03-11.orig/arch/x86/kernel/mpparse_64-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,880 +0,0 @@ -/* - * Intel Multiprocessor Specification 1.1 and 1.4 - * compliant MP-table parsing routines. - * - * (c) 1995 Alan Cox, Building #3 - * (c) 1998, 1999, 2000 Ingo Molnar - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -/* Have we found an MP table */ -int smp_found_config; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; - -static int mp_current_pci_id = 0; -/* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; - -/* # of MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* MP IRQ source entries */ -int mp_irq_entries; - -int nr_ioapics; -unsigned long mp_lapic_addr = 0; - - -#ifndef CONFIG_XEN -/* Processor that is doing the boot up */ -unsigned int boot_cpu_id = -1U; -EXPORT_SYMBOL(boot_cpu_id); -#endif - -/* Internal processor count */ -unsigned int num_processors; - -unsigned disabled_cpus __cpuinitdata; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; - -#ifndef CONFIG_XEN -u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata - = { [0 ... NR_CPUS-1] = BAD_APICID }; -void *x86_bios_cpu_apicid_early_ptr; -#endif -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - - -/* - * Intel MP BIOS table parsing routines: - */ - -/* - * Checksum an MP configuration block. - */ - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -#ifndef CONFIG_XEN -static void __cpuinit MP_processor_info(struct mpc_config_processor *m) -{ - int cpu; - cpumask_t tmp_map; - char *bootup_cpu = ""; - - if (!(m->mpc_cpuflag & CPU_ENABLED)) { - disabled_cpus++; - return; - } - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - bootup_cpu = " (Bootup-CPU)"; - boot_cpu_id = m->mpc_apicid; - } - - printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - num_processors++; - cpus_complement(tmp_map, cpu_present_map); - cpu = first_cpu(tmp_map); - - physid_set(m->mpc_apicid, phys_cpu_present_map); - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - /* - * x86_bios_cpu_apicid is required to have processors listed - * in same order as logical cpu numbers. Hence the first - * entry is BSP, and so on. - */ - cpu = 0; - } - /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; - - cpu_to_apicid[cpu] = m->mpc_apicid; - bios_cpu_apicid[cpu] = m->mpc_apicid; - } else { - per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid; - per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid; - } - - cpu_set(cpu, cpu_possible_map); - cpu_set(cpu, cpu_present_map); -} -#else -static void __cpuinit MP_processor_info(struct mpc_config_processor *m) -{ - num_processors++; -} -#endif /* CONFIG_XEN */ - -static void __init MP_bus_info (struct mpc_config_bus *m) -{ - char str[7]; - - memcpy(str, m->mpc_bustype, 6); - str[6] = 0; - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); - - if (strncmp(str, "ISA", 3) == 0) { - set_bit(m->mpc_busid, mp_bus_not_pci); - } else if (strncmp(str, "PCI", 3) == 0) { - clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; - } else { - printk(KERN_ERR "Unknown bustype %s\n", str); - } -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -static void __init MP_ioapic_info (struct mpc_config_ioapic *m) -{ - if (!(m->mpc_flags & MPC_APIC_USABLE)) - return; - - printk("I/O APIC #%d at 0x%X.\n", - m->mpc_apicid, m->mpc_apicaddr); - - if (bad_ioapic(m->mpc_apicaddr)) - return; - - mp_ioapics[nr_ioapics] = *m; - nr_ioapics++; -} - -static void __init MP_intsrc_info (struct mpc_config_intsrc *m) -{ - mp_irqs [mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, - m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries >= MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - -static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) -{ - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); -} - -/* - * Read/parse the MPC - */ - -static int __init smp_read_mpc(struct mp_config_table *mpc) -{ - char str[16]; - int count=sizeof(*mpc); - unsigned char *mpt=((unsigned char *)mpc)+count; - - if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk("MPTABLE: bad signature [%c%c%c%c]!\n", - mpc->mpc_signature[0], - mpc->mpc_signature[1], - mpc->mpc_signature[2], - mpc->mpc_signature[3]); - return 0; - } - if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk("MPTABLE: checksum error!\n"); - return 0; - } - if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", - mpc->mpc_spec); - return 0; - } - if (!mpc->mpc_lapic) { - printk(KERN_ERR "MPTABLE: null local APIC address!\n"); - return 0; - } - memcpy(str,mpc->mpc_oem,8); - str[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); - - memcpy(str,mpc->mpc_productid,12); - str[12] = 0; - printk("MPTABLE: Product ID: %s ",str); - - printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); - - /* save the local APIC address, it might be non-default */ - if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; - - /* - * Now process the configuration blocks. - */ - while (count < mpc->mpc_length) { - switch(*mpt) { - case MP_PROCESSOR: - { - struct mpc_config_processor *m= - (struct mpc_config_processor *)mpt; - if (!acpi_lapic) - MP_processor_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_BUS: - { - struct mpc_config_bus *m= - (struct mpc_config_bus *)mpt; - MP_bus_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_IOAPIC: - { - struct mpc_config_ioapic *m= - (struct mpc_config_ioapic *)mpt; - MP_ioapic_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_INTSRC: - { - struct mpc_config_intsrc *m= - (struct mpc_config_intsrc *)mpt; - - MP_intsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_LINTSRC: - { - struct mpc_config_lintsrc *m= - (struct mpc_config_lintsrc *)mpt; - MP_lintsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - } - } - setup_apic_routing(); - if (!num_processors) - printk(KERN_ERR "MPTABLE: no processors registered!\n"); - return num_processors; -} - -static int __init ELCR_trigger(unsigned int irq) -{ - unsigned int port; - - port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; -} - -static void __init construct_default_ioirq_mptable(int mpc_default_type) -{ - struct mpc_config_intsrc intsrc; - int i; - int ELCR_fallback = 0; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* conforming */ - intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; - - intsrc.mpc_irqtype = mp_INT; - - /* - * If true, we have an ISA/PCI system with no IRQ entries - * in the MP table. To prevent the PCI interrupts from being set up - * incorrectly, we try to use the ELCR. The sanity check to see if - * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can - * never be level sensitive, so we simply see if the ELCR agrees. - * If it does, we assume it's valid. - */ - if (mpc_default_type == 5) { - printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); - - if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) - printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n"); - else { - printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); - ELCR_fallback = 1; - } - } - - for (i = 0; i < 16; i++) { - switch (mpc_default_type) { - case 2: - if (i == 0 || i == 13) - continue; /* IRQ0 & IRQ13 not connected */ - /* fall through */ - default: - if (i == 2) - continue; /* IRQ2 is never connected */ - } - - if (ELCR_fallback) { - /* - * If the ELCR indicates a level-sensitive interrupt, we - * copy that information over to the MP table in the - * irqflag field (level sensitive, active high polarity). - */ - if (ELCR_trigger(i)) - intsrc.mpc_irqflag = 13; - else - intsrc.mpc_irqflag = 0; - } - - intsrc.mpc_srcbusirq = i; - intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); - } - - intsrc.mpc_irqtype = mp_ExtINT; - intsrc.mpc_srcbusirq = 0; - intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); -} - -static inline void __init construct_default_ISA_mptable(int mpc_default_type) -{ - struct mpc_config_processor processor; - struct mpc_config_bus bus; - struct mpc_config_ioapic ioapic; - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicver = 0; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = 0; - processor.mpc_featureflag = 0; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - switch (mpc_default_type) { - default: - printk(KERN_ERR "???\nUnknown standard configuration %d\n", - mpc_default_type); - /* fall through */ - case 1: - case 5: - memcpy(bus.mpc_bustype, "ISA ", 6); - break; - } - MP_bus_info(&bus); - if (mpc_default_type > 4) { - bus.mpc_busid = 1; - memcpy(bus.mpc_bustype, "PCI ", 6); - MP_bus_info(&bus); - } - - ioapic.mpc_type = MP_IOAPIC; - ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = 0; - ioapic.mpc_flags = MPC_APIC_USABLE; - ioapic.mpc_apicaddr = 0xFEC00000; - MP_ioapic_info(&ioapic); - - /* - * We set up most of the low 16 IO-APIC pins according to MPS rules. - */ - construct_default_ioirq_mptable(mpc_default_type); - - lintsrc.mpc_type = MP_LINTSRC; - lintsrc.mpc_irqflag = 0; /* conforming */ - lintsrc.mpc_srcbusid = 0; - lintsrc.mpc_srcbusirq = 0; - lintsrc.mpc_destapic = MP_APIC_ALL; - for (i = 0; i < 2; i++) { - lintsrc.mpc_irqtype = linttypes[i]; - lintsrc.mpc_destapiclint = i; - MP_lintsrc_info(&lintsrc); - } -} - -static struct intel_mp_floating *mpf_found; - -/* - * Scan the memory blocks for an SMP configuration block. - */ -void __init get_smp_config (void) -{ - struct intel_mp_floating *mpf = mpf_found; - - /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); - return; - } - else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); - - printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - - /* - * Now see if we need to read further. - */ - if (mpf->mpf_feature1 != 0) { - - printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); - - } else if (mpf->mpf_physptr) { - - /* - * Read the physical hardware table. Anything here will - * override the defaults. - */ - if (!smp_read_mpc(isa_bus_to_virt(mpf->mpf_physptr))) { - smp_found_config = 0; - printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); - printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); - return; - } - /* - * If there are no explicit MP IRQ entries, then we are - * broken. We set up most of the low 16 IO-APIC pins to - * ISA defaults and hope it will work. - */ - if (!mp_irq_entries) { - struct mpc_config_bus bus; - - printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - memcpy(bus.mpc_bustype, "ISA ", 6); - MP_bus_info(&bus); - - construct_default_ioirq_mptable(0); - } - - } else - BUG(); - - printk(KERN_INFO "Processors: %d\n", num_processors); - /* - * Only use the first configuration found. - */ -} - -static int __init smp_scan_config (unsigned long base, unsigned long length) -{ - extern void __bad_mpf_size(void); - unsigned int *bp = isa_bus_to_virt(base); - struct intel_mp_floating *mpf; - - Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); - if (sizeof(*mpf) != 16) - __bad_mpf_size(); - - while (length > 0) { - mpf = (struct intel_mp_floating *)bp; - if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && - !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4)) ) { - - smp_found_config = 1; - mpf_found = mpf; - return 1; - } - bp += 4; - length -= 16; - } - return 0; -} - -void __init find_smp_config(void) -{ - unsigned int address; - - /* - * FIXME: Linux assumes you have 640K of base ram.. - * this continues the error... - * - * 1) Scan the bottom 1K for a signature - * 2) Scan the top 1K of base RAM - * 3) Scan the 64K of bios - */ - if (smp_scan_config(0x0,0x400) || - smp_scan_config(639*0x400,0x400) || - smp_scan_config(0xF0000,0x10000)) - return; - /* - * If it is an SMP machine we should know now. - * - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E, calculate and scan it here. - * - * NOTE! There are Linux loaders that will corrupt the EBDA - * area, and as such this kind of SMP config may be less - * trustworthy, simply because the SMP table may have been - * stomped on during early boot. These loaders are buggy and - * should be fixed. - */ - - address = *(unsigned short *)phys_to_virt(0x40E); - address <<= 4; - if (smp_scan_config(address, 0x1000)) - return; - - /* If we have come this far, we did not find an MP table */ - printk(KERN_INFO "No mptable found.\n"); -} - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -void __init mp_register_lapic_address(u64 address) -{ -#ifndef CONFIG_XEN - mp_lapic_addr = (unsigned long) address; - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_id == -1U) - boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); -#endif -} - -void __cpuinit mp_register_lapic (u8 id, u8 enabled) -{ - struct mpc_config_processor processor; -#ifndef CONFIG_XEN - int boot_cpu = 0; - - if (id == boot_cpu_id) - boot_cpu = 1; - - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicid = id; - processor.mpc_apicver = 0; - processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); - processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = 0; - processor.mpc_featureflag = 0; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; -#endif - - MP_processor_info(&processor); -} - -#define MP_ISA_BUS 0 -#define MP_MAX_IOAPIC_PIN 127 - -static struct mp_ioapic_routing { - int apic_id; - int gsi_start; - int gsi_end; - u32 pin_programmed[4]; -} mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_start) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 uniq_ioapic_id(u8 id) -{ - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -} - -void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - -#ifndef CONFIG_XEN - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); -#endif - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); - mp_ioapics[idx].mpc_apicver = 0; - - /* - * Build basic IRQ lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI IRQs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_start = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_start, - mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init -mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_start; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", - intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - - /* - * Fabricate the legacy ISA bus (bus #31). - */ - set_bit(MP_ISA_BUS, mp_bus_not_pci); - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; - - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " - "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, - intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start; - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - bit = ioapic_pin % 32; - idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); - if (idx > 3) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if ((1< -#include -#include +#include +#include +#include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef __x86_64__ -#include +#include +#include +#include +#include + +int forbid_dac __read_mostly; +EXPORT_SYMBOL(forbid_dac); + +const struct dma_mapping_ops *dma_ops; +EXPORT_SYMBOL(dma_ops); + +static int iommu_sac_force __read_mostly; + +#ifdef CONFIG_IOMMU_DEBUG +int panic_on_overflow __read_mostly = 1; +int force_iommu __read_mostly = 1; +#else +int panic_on_overflow __read_mostly = 0; +int force_iommu __read_mostly = 0; +#endif int iommu_merge __read_mostly = 0; -EXPORT_SYMBOL(iommu_merge); -dma_addr_t bad_dma_address __read_mostly; -EXPORT_SYMBOL(bad_dma_address); +int no_iommu __read_mostly; +/* Set this to 1 if there is a HW IOMMU in the system */ +int iommu_detected __read_mostly = 0; /* This tells the BIO block layer to assume merging. Default to off because we cannot guarantee merging later. */ int iommu_bio_merge __read_mostly = 0; EXPORT_SYMBOL(iommu_bio_merge); -int force_iommu __read_mostly= 0; +dma_addr_t bad_dma_address __read_mostly = 0; +EXPORT_SYMBOL(bad_dma_address); -__init int iommu_setup(char *p) -{ - return 1; -} +/* Dummy device used for NULL arguments (normally ISA). Better would + be probably a smaller DMA mask, but this is bug-to-bug compatible + to older i386. */ +struct device fallback_dev = { + .bus_id = "fallback device", + .coherent_dma_mask = DMA_32BIT_MASK, + .dma_mask = &fallback_dev.coherent_dma_mask, +}; -void __init pci_iommu_alloc(void) +int dma_set_mask(struct device *dev, u64 mask) { -#ifdef CONFIG_SWIOTLB - pci_swiotlb_init(); -#endif -} + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; -static int __init pci_iommu_init(void) -{ - no_iommu_init(); return 0; } +EXPORT_SYMBOL(dma_set_mask); -/* Must execute after PCI subsystem */ -fs_initcall(pci_iommu_init); -#endif - -struct dma_coherent_mem { - void *virt_base; - u32 device_base; - int size; - int flags; - unsigned long *bitmap; -}; - -#define IOMMU_BUG_ON(test) \ -do { \ - if (unlikely(test)) { \ - printk(KERN_ALERT "Fatal DMA error! " \ - "Please use 'swiotlb=force'\n"); \ - BUG(); \ - } \ -} while (0) +#if defined(CONFIG_X86_64) && !defined(CONFIG_XEN) +static __initdata void *dma32_bootmem_ptr; +static unsigned long dma32_bootmem_size __initdata = (128ULL<<20); -static int check_pages_physically_contiguous(unsigned long pfn, - unsigned int offset, - size_t length) +static int __init parse_dma32_size_opt(char *p) { - unsigned long next_mfn; - int i; - int nr_pages; - - next_mfn = pfn_to_mfn(pfn); - nr_pages = (offset + length + PAGE_SIZE-1) >> PAGE_SHIFT; - - for (i = 1; i < nr_pages; i++) { - if (pfn_to_mfn(++pfn) != ++next_mfn) - return 0; - } - return 1; + if (!p) + return -EINVAL; + dma32_bootmem_size = memparse(p, &p); + return 0; } +early_param("dma32_size", parse_dma32_size_opt); -int range_straddles_page_boundary(paddr_t p, size_t size) +void __init dma32_reserve_bootmem(void) { - unsigned long pfn = p >> PAGE_SHIFT; - unsigned int offset = p & ~PAGE_MASK; + unsigned long size, align; + if (end_pfn <= MAX_DMA32_PFN) + return; - return ((offset + size > PAGE_SIZE) && - !check_pages_physically_contiguous(pfn, offset, size)); + align = 64ULL<<20; + size = round_up(dma32_bootmem_size, align); + dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, + __pa(MAX_DMA_ADDRESS)); + if (dma32_bootmem_ptr) + dma32_bootmem_size = size; + else + dma32_bootmem_size = 0; } - -int -dma_map_sg(struct device *hwdev, struct scatterlist *sgl, int nents, - enum dma_data_direction direction) +static void __init dma32_free_bootmem(void) { - int i, rc; + int node; + + if (end_pfn <= MAX_DMA32_PFN) + return; - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nents == 0 || sgl->length == 0); + if (!dma32_bootmem_ptr) + return; - if (swiotlb) { - rc = swiotlb_map_sg(hwdev, sgl, nents, direction); - } else { - struct scatterlist *sg; - - for_each_sg(sgl, sg, nents, i) { - BUG_ON(!sg_page(sg)); - sg->dma_address = - gnttab_dma_map_page(sg_page(sg)) + sg->offset; - sg->dma_length = sg->length; - IOMMU_BUG_ON(address_needs_mapping( - hwdev, sg->dma_address)); - IOMMU_BUG_ON(range_straddles_page_boundary( - page_to_pseudophys(sg_page(sg)) + sg->offset, - sg->length)); - } - rc = nents; - } + for_each_online_node(node) + free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), + dma32_bootmem_size); - flush_write_buffers(); - return rc; + dma32_bootmem_ptr = NULL; + dma32_bootmem_size = 0; } -EXPORT_SYMBOL(dma_map_sg); +#else +#define dma32_free_bootmem() ((void)0) +#endif -void -dma_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - int i; +static const struct dma_mapping_ops swiotlb_dma_ops = { + .mapping_error = swiotlb_dma_mapping_error, + .map_single = swiotlb_map_single_phys, + .unmap_single = swiotlb_unmap_single, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, + .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .map_sg = swiotlb_map_sg, + .unmap_sg = swiotlb_unmap_sg, + .dma_supported = swiotlb_dma_supported +}; - BUG_ON(!valid_dma_direction(direction)); - if (swiotlb) - swiotlb_unmap_sg(hwdev, sgl, nents, direction); - else { - struct scatterlist *sg; +void __init pci_iommu_alloc(void) +{ + /* free the range so iommu could get some range less than 4G */ + dma32_free_bootmem(); + /* + * The order of these functions is important for + * fall-back/fail-over reasons + */ +#ifdef CONFIG_GART_IOMMU + gart_iommu_hole_init(); +#endif - for_each_sg(sgl, sg, nents, i) - gnttab_dma_unmap_page(sg->dma_address); - } -} -EXPORT_SYMBOL(dma_unmap_sg); +#ifdef CONFIG_CALGARY_IOMMU + detect_calgary(); +#endif -#ifdef CONFIG_HIGHMEM -dma_addr_t -dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ - dma_addr_t dma_addr; + detect_intel_iommu(); - BUG_ON(!valid_dma_direction(direction)); +#ifdef CONFIG_SWIOTLB + swiotlb_init(); if (swiotlb) { - dma_addr = swiotlb_map_page( - dev, page, offset, size, direction); - } else { - dma_addr = gnttab_dma_map_page(page) + offset; - IOMMU_BUG_ON(address_needs_mapping(dev, dma_addr)); + printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n"); + dma_ops = &swiotlb_dma_ops; } - - return dma_addr; +#endif } -EXPORT_SYMBOL(dma_map_page); -void -dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) +/* + * See for the iommu kernel parameter + * documentation. + */ +static __init int iommu_setup(char *p) { - BUG_ON(!valid_dma_direction(direction)); - if (swiotlb) - swiotlb_unmap_page(dev, dma_address, size, direction); - else - gnttab_dma_unmap_page(dma_address); -} -EXPORT_SYMBOL(dma_unmap_page); -#endif /* CONFIG_HIGHMEM */ + iommu_merge = 1; -int -dma_mapping_error(dma_addr_t dma_addr) -{ - if (swiotlb) - return swiotlb_dma_mapping_error(dma_addr); - return 0; -} -EXPORT_SYMBOL(dma_mapping_error); + if (!p) + return -EINVAL; -int -dma_supported(struct device *dev, u64 mask) -{ - if (swiotlb) - return swiotlb_dma_supported(dev, mask); - /* - * By default we'll BUG when an infeasible DMA is requested, and - * request swiotlb=force (see IOMMU_BUG_ON). - */ - return 1; -} -EXPORT_SYMBOL(dma_supported); + while (*p) { + if (!strncmp(p, "off", 3)) + no_iommu = 1; + /* gart_parse_options has more force support */ + if (!strncmp(p, "force", 5)) + force_iommu = 1; + if (!strncmp(p, "noforce", 7)) { + iommu_merge = 0; + force_iommu = 0; + } -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp) -{ - void *ret; - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - unsigned int order = get_order(size); - unsigned long vstart; - u64 mask; + if (!strncmp(p, "biomerge", 8)) { + iommu_bio_merge = 4096; + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "panic", 5)) + panic_on_overflow = 1; + if (!strncmp(p, "nopanic", 7)) + panic_on_overflow = 0; + if (!strncmp(p, "merge", 5)) { + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "nomerge", 7)) + iommu_merge = 0; + if (!strncmp(p, "forcesac", 8)) + iommu_sac_force = 1; + if (!strncmp(p, "allowdac", 8)) + forbid_dac = 0; + if (!strncmp(p, "nodac", 5)) + forbid_dac = -1; + if (!strncmp(p, "usedac", 6)) { + forbid_dac = -1; + return 1; + } +#ifdef CONFIG_SWIOTLB + if (!strncmp(p, "soft", 4)) + swiotlb = 1; +#endif - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); +#ifdef CONFIG_GART_IOMMU + gart_parse_options(p); +#endif - if (mem) { - int page = bitmap_find_free_region(mem->bitmap, mem->size, - order); - if (page >= 0) { - *dma_handle = mem->device_base + (page << PAGE_SHIFT); - ret = mem->virt_base + (page << PAGE_SHIFT); - memset(ret, 0, size); - return ret; - } - if (mem->flags & DMA_MEMORY_EXCLUSIVE) - return NULL; +#ifdef CONFIG_CALGARY_IOMMU + if (!strncmp(p, "calgary", 7)) + use_calgary = 1; +#endif /* CONFIG_CALGARY_IOMMU */ + + p += strcspn(p, ","); + if (*p == ',') + ++p; } + return 0; +} +early_param("iommu", iommu_setup); - vstart = __get_free_pages(gfp, order); - ret = (void *)vstart; +static int check_pages_physically_contiguous(unsigned long pfn, + unsigned int offset, + size_t length) +{ + unsigned long next_mfn; + int i; + int nr_pages; - if (dev != NULL && dev->coherent_dma_mask) - mask = dev->coherent_dma_mask; - else - mask = 0xffffffff; + next_mfn = pfn_to_mfn(pfn); + nr_pages = (offset + length + PAGE_SIZE-1) >> PAGE_SHIFT; - if (ret != NULL) { - if (xen_create_contiguous_region(vstart, order, - fls64(mask)) != 0) { - free_pages(vstart, order); - return NULL; - } - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); + for (i = 1; i < nr_pages; i++) { + if (pfn_to_mfn(++pfn) != ++next_mfn) + return 0; } - return ret; + return 1; } -EXPORT_SYMBOL(dma_alloc_coherent); -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) +int range_straddles_page_boundary(paddr_t p, size_t size) { - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; - int order = get_order(size); - - WARN_ON(irqs_disabled()); /* for portability */ - if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { - int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; + unsigned long pfn = p >> PAGE_SHIFT; + unsigned int offset = p & ~PAGE_MASK; - bitmap_release_region(mem->bitmap, page, order); - } else { - xen_destroy_contiguous_region((unsigned long)vaddr, order); - free_pages((unsigned long)vaddr, order); - } + return ((offset + size > PAGE_SIZE) && + !check_pages_physically_contiguous(pfn, offset, size)); } -EXPORT_SYMBOL(dma_free_coherent); -#ifdef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY +#ifdef CONFIG_X86_32 int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, dma_addr_t device_addr, size_t size, int flags) { @@ -324,8 +295,8 @@ EXPORT_SYMBOL(dma_declare_coherent_memor void dma_release_declared_memory(struct device *dev) { struct dma_coherent_mem *mem = dev->dma_mem; - - if(!mem) + + if (!mem) return; dev->dma_mem = NULL; iounmap(mem->virt_base); @@ -338,8 +309,10 @@ void *dma_mark_declared_memory_occupied( dma_addr_t device_addr, size_t size) { struct dma_coherent_mem *mem = dev->dma_mem; - int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; int pos, err; + int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1); + + pages >>= PAGE_SHIFT; if (!mem) return ERR_PTR(-EINVAL); @@ -351,103 +324,270 @@ void *dma_mark_declared_memory_occupied( return mem->virt_base + (pos << PAGE_SHIFT); } EXPORT_SYMBOL(dma_mark_declared_memory_occupied); -#endif /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */ - -#if defined(CONFIG_PCI) && !defined(CONFIG_XEN) -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ - -int forbid_dac; -EXPORT_SYMBOL(forbid_dac); -static __devinit void via_no_dac(struct pci_dev *dev) +static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size, + dma_addr_t *dma_handle, void **ret) { - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); - forbid_dac = 1; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + + if (mem) { + int page = bitmap_find_free_region(mem->bitmap, mem->size, + order); + if (page >= 0) { + *dma_handle = mem->device_base + (page << PAGE_SHIFT); + *ret = mem->virt_base + (page << PAGE_SHIFT); + memset(*ret, 0, size); + } + if (mem->flags & DMA_MEMORY_EXCLUSIVE) + *ret = NULL; } + return (mem != NULL); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); -static int check_iommu(char *s) +static int dma_release_coherent(struct device *dev, int order, void *vaddr) { - if (!strcmp(s, "usedac")) { - forbid_dac = -1; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + + if (mem && vaddr >= mem->virt_base && vaddr < + (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; + + bitmap_release_region(mem->bitmap, page, order); return 1; } return 0; } -__setup("iommu=", check_iommu); +#else +#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0) +#define dma_release_coherent(dev, order, vaddr) (0) +#endif /* CONFIG_X86_32 */ + +int dma_supported(struct device *dev, u64 mask) +{ +#ifdef CONFIG_PCI + if (mask > 0xffffffff && forbid_dac > 0) { + printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", + dev->bus_id); + return 0; + } #endif -dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) + if (dma_ops->dma_supported) + return dma_ops->dma_supported(dev, mask); + + /* Copied from i386. Doesn't make much sense, because it will + only work for pci_alloc_coherent. + The caller just has to use GFP_DMA in this case. */ + if (mask < DMA_24BIT_MASK) + return 0; + + /* Tell the device to use SAC when IOMMU force is on. This + allows the driver to use cheaper accesses in some cases. + + Problem with this is that if we overflow the IOMMU area and + return DAC as fallback address the device may not handle it + correctly. + + As a special case some controllers have a 39bit address + mode that is as efficient as 32bit (aic79xx). Don't force + SAC for these. Assume all masks <= 40 bits are of this + type. Normally this doesn't make any difference, but gives + more gentle handling of IOMMU overflow. */ + if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { + printk(KERN_INFO "%s: Force SAC with mask %Lx\n", + dev->bus_id, mask); + return 0; + } + + return 1; +} +EXPORT_SYMBOL(dma_supported); + +/* Allocate DMA memory on node near device */ +static struct page * +dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { - dma_addr_t dma; + int node; - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(size == 0); + node = dev_to_node(dev); - if (swiotlb) { - dma = swiotlb_map_single(dev, ptr, size, direction); - } else { - dma = gnttab_dma_map_page(virt_to_page(ptr)) + - offset_in_page(ptr); - IOMMU_BUG_ON(range_straddles_page_boundary(__pa(ptr), size)); - IOMMU_BUG_ON(address_needs_mapping(dev, dma)); - } - - flush_write_buffers(); - return dma; -} -EXPORT_SYMBOL(dma_map_single); - -void -dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (swiotlb) - swiotlb_unmap_single(dev, dma_addr, size, direction); - else - gnttab_dma_unmap_page(dma_addr); + return alloc_pages_node(node, gfp, order); } -EXPORT_SYMBOL(dma_unmap_single); -void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) +/* + * Allocate memory for a coherent mapping. + */ +void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp) +{ + void *memory = NULL; + struct page *page; + unsigned long dma_mask = 0; + int noretry = 0; + unsigned int order = get_order(size); + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); + + if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory)) + return memory; + + if (!dev) { + dev = &fallback_dev; + gfp |= GFP_DMA; + } + dma_mask = dev->coherent_dma_mask; + if (dma_mask == 0) + dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK; + + /* Device not DMA able */ + if (dev->dma_mask == NULL) + return NULL; + +#ifdef CONFIG_XEN + gfp &= ~(__GFP_DMA | __GFP_DMA32); +#else + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + if (gfp & __GFP_DMA) + noretry = 1; + +#ifdef CONFIG_X86_64 + /* Why <=? Even when the mask is smaller than 4GB it is often + larger than 16MB and in this case we have a chance of + finding fitting memory in the next higher zone first. If + not retry with true GFP_DMA. -AK */ + if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) { + gfp |= GFP_DMA32; +#endif + + again: +#endif + page = dma_alloc_pages(dev, + noretry ? gfp | __GFP_NORETRY : gfp, order); + if (page == NULL) + return NULL; + +#ifndef CONFIG_XEN + { + int high, mmu; + dma_addr_t bus = page_to_phys(page); + memory = page_address(page); + high = (bus + size) >= dma_mask; + mmu = high; + if (force_iommu && !(gfp & GFP_DMA)) + mmu = 1; + else if (high) { + free_pages((unsigned long)memory, order); + + /* Don't use the 16MB ZONE_DMA unless absolutely + needed. It's better to use remapping first. */ + if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { + gfp = (gfp & ~GFP_DMA32) | GFP_DMA; + goto again; + } + + /* Let low level make its own zone decisions */ + gfp &= ~(GFP_DMA32|GFP_DMA); + + if (dma_ops->alloc_coherent) + return dma_ops->alloc_coherent(dev, size, + dma_handle, gfp); + return NULL; + } + + memset(memory, 0, size); + if (!mmu) { + *dma_handle = bus; + return memory; + } + } + + if (dma_ops->alloc_coherent) { + free_pages((unsigned long)memory, order); + gfp &= ~(GFP_DMA|GFP_DMA32); + return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); + } + + if (dma_ops->map_simple) { + *dma_handle = dma_ops->map_simple(dev, virt_to_bus(memory), + size, + PCI_DMA_BIDIRECTIONAL); + if (*dma_handle != bad_dma_address) + return memory; + } +#else + memory = page_address(page); + if (xen_create_contiguous_region((unsigned long)memory, order, + fls64(dma_mask)) == 0) { + memset(memory, 0, size); + *dma_handle = virt_to_bus(memory); + return memory; + } +#endif + + if (panic_on_overflow) + panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n", + (unsigned long)size); + free_pages((unsigned long)memory, order); + return NULL; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +/* + * Unmap coherent memory. + * The caller must ensure that the device has finished accessing the mapping. + */ +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t bus) { - if (swiotlb) - swiotlb_sync_single_for_cpu(dev, dma_handle, size, direction); + int order = get_order(size); + WARN_ON(irqs_disabled()); /* for portability */ + if (dma_release_coherent(dev, order, vaddr)) + return; +#ifndef CONFIG_XEN + if (dma_ops->unmap_single) + dma_ops->unmap_single(dev, bus, size, 0); +#endif + xen_destroy_contiguous_region((unsigned long)vaddr, order); + free_pages((unsigned long)vaddr, order); } -EXPORT_SYMBOL(dma_sync_single_for_cpu); +EXPORT_SYMBOL(dma_free_coherent); -void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) +static int __init pci_iommu_init(void) { - if (swiotlb) - swiotlb_sync_single_for_device(dev, dma_handle, size, direction); +#ifdef CONFIG_CALGARY_IOMMU + calgary_iommu_init(); +#endif + + intel_iommu_init(); + +#ifdef CONFIG_GART_IOMMU + gart_iommu_init(); +#endif + + no_iommu_init(); + return 0; } -EXPORT_SYMBOL(dma_sync_single_for_device); -void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) +void pci_iommu_shutdown(void) { - if (swiotlb) - swiotlb_sync_sg_for_cpu(dev,sg,nelems,direction); - flush_write_buffers(); + gart_iommu_shutdown(); } -EXPORT_SYMBOL(dma_sync_sg_for_cpu); +/* Must execute after PCI subsystem */ +fs_initcall(pci_iommu_init); + +#ifdef CONFIG_PCI +/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ -void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) +static __devinit void via_no_dac(struct pci_dev *dev) { - if (swiotlb) - swiotlb_sync_sg_for_device(dev,sg,nelems,direction); - flush_write_buffers(); + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { + printk(KERN_INFO "PCI: VIA PCI bridge detected." + "Disabling DAC.\n"); + forbid_dac = 1; + } } -EXPORT_SYMBOL(dma_sync_sg_for_device); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); +#endif --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ head-2011-03-11/arch/x86/kernel/pci-nommu-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -0,0 +1,108 @@ +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include + +#define IOMMU_BUG_ON(test) \ +do { \ + if (unlikely(test)) { \ + printk(KERN_ALERT "Fatal DMA error! " \ + "Please use 'swiotlb=force'\n"); \ + BUG(); \ + } \ +} while (0) + +static int +gnttab_map_sg(struct device *hwdev, struct scatterlist *sgl, int nents, + int direction) +{ + unsigned int i; + struct scatterlist *sg; + + WARN_ON(nents == 0 || sgl->length == 0); + + for_each_sg(sgl, sg, nents, i) { + BUG_ON(!sg_page(sg)); + sg->dma_address = + gnttab_dma_map_page(sg_page(sg)) + sg->offset; + sg->dma_length = sg->length; + IOMMU_BUG_ON(address_needs_mapping( + hwdev, sg->dma_address)); + IOMMU_BUG_ON(range_straddles_page_boundary( + page_to_pseudophys(sg_page(sg)) + sg->offset, + sg->length)); + } + + return nents; +} + +static void +gnttab_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nents, + int direction) +{ + unsigned int i; + struct scatterlist *sg; + + for_each_sg(sgl, sg, nents, i) + gnttab_dma_unmap_page(sg->dma_address); +} + +static dma_addr_t +gnttab_map_single(struct device *dev, phys_addr_t paddr, size_t size, + int direction) +{ + dma_addr_t dma; + + WARN_ON(size == 0); + + dma = gnttab_dma_map_page(pfn_to_page(paddr >> PAGE_SHIFT)) + + offset_in_page(paddr); + IOMMU_BUG_ON(range_straddles_page_boundary(paddr, size)); + IOMMU_BUG_ON(address_needs_mapping(dev, dma)); + + return dma; +} + +static void +gnttab_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + int direction) +{ + gnttab_dma_unmap_page(dma_addr); +} + +static int nommu_dma_supported(struct device *hwdev, u64 mask) +{ + return 1; +} + +static int nommu_mapping_error(dma_addr_t dma_addr) +{ + return (dma_addr == bad_dma_address); +} + +static const struct dma_mapping_ops nommu_dma_ops = { + .map_single = gnttab_map_single, + .unmap_single = gnttab_unmap_single, + .map_sg = gnttab_map_sg, + .unmap_sg = gnttab_unmap_sg, + .dma_supported = nommu_dma_supported, + .mapping_error = nommu_mapping_error +}; + +void __init no_iommu_init(void) +{ + if (dma_ops) + return; + + force_iommu = 0; /* no HW IOMMU */ + dma_ops = &nommu_dma_ops; +} --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ head-2011-03-11/arch/x86/kernel/process-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -0,0 +1,188 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +struct kmem_cache *task_xstate_cachep; + +int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) +{ + *dst = *src; + if (src->thread.xstate) { + dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep, + GFP_KERNEL); + if (!dst->thread.xstate) + return -ENOMEM; + WARN_ON((unsigned long)dst->thread.xstate & 15); + memcpy(dst->thread.xstate, src->thread.xstate, xstate_size); + } + return 0; +} + +void free_thread_xstate(struct task_struct *tsk) +{ + if (tsk->thread.xstate) { + kmem_cache_free(task_xstate_cachep, tsk->thread.xstate); + tsk->thread.xstate = NULL; + } +} + +void free_thread_info(struct thread_info *ti) +{ + free_thread_xstate(ti->task); + free_pages((unsigned long)ti, get_order(THREAD_SIZE)); +} + +void arch_task_cache_init(void) +{ + task_xstate_cachep = + kmem_cache_create("task_xstate", xstate_size, + __alignof__(union thread_xstate), + SLAB_PANIC, NULL); +} + +static void do_nothing(void *unused) +{ +} + +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ +void cpu_idle_wait(void) +{ + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 0, 1); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); + +#ifndef CONFIG_XEN +/* + * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, + * which can obviate IPI to trigger checking of need_resched. + * We execute MONITOR against need_resched and enter optimized wait state + * through MWAIT. Whenever someone changes need_resched, we would be woken + * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. + */ +void mwait_idle_with_hints(unsigned long ax, unsigned long cx) +{ + if (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __mwait(ax, cx); + } +} + +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + if (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __sti_mwait(0, 0); + else + local_irq_enable(); + } else + local_irq_enable(); +} +#endif + +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static void poll_idle(void) +{ + local_irq_enable(); + cpu_relax(); +} + +#ifndef CONFIG_XEN +/* + * mwait selection logic: + * + * It depends on the CPU. For AMD CPUs that support MWAIT this is + * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings + * then depend on a clock divisor and current Pstate of the core. If + * all cores of a processor are in halt state (C1) the processor can + * enter the C1E (C1 enhanced) state. If mwait is used this will never + * happen. + * + * idle=mwait overrides this decision and forces the usage of mwait. + */ +static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) +{ + if (force_mwait) + return 1; + + if (c->x86_vendor == X86_VENDOR_AMD) { + switch(c->x86) { + case 0x10: + case 0x11: + return 0; + } + } + return 1; +} +#endif + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ +#ifndef CONFIG_XEN + static int selected; + + if (selected) + return; +#ifdef CONFIG_X86_SMP + if (pm_idle == poll_idle && smp_num_siblings > 1) { + printk(KERN_WARNING "WARNING: polling idle and HT enabled," + " performance may degrade.\n"); + } +#endif + if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) { + /* + * Skip, if setup has overridden idle. + * One CPU supports mwait => All CPUs supports mwait + */ + if (!pm_idle) { + printk(KERN_INFO "using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } + } + selected = 1; +#endif +} + +static int __init idle_setup(char *str) +{ + if (!strcmp(str, "poll")) { + printk("using polling idle threads.\n"); + pm_idle = poll_idle; + } +#ifndef CONFIG_XEN + else if (!strcmp(str, "mwait")) + force_mwait = 1; +#endif + else + return -1; + + boot_option_idle_override = 1; + return 0; +} +early_param("idle", idle_setup); + --- head-2011-03-11.orig/arch/x86/kernel/process_32-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/process_32-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -45,7 +46,6 @@ #include #include #include -#include #ifdef CONFIG_MATH_EMULATION #include #endif @@ -102,16 +102,6 @@ void enable_hlt(void) EXPORT_SYMBOL(enable_hlt); -/* - * On SMP it's slightly faster (but much more power-consuming!) - * to poll the ->work.need_resched flag instead of waiting for the - * cross-CPU IPI to arrive. Use this option with caution. - */ -static void poll_idle(void) -{ - cpu_relax(); -} - static void xen_idle(void) { current_thread_info()->status &= ~TS_POLLING; @@ -121,20 +111,10 @@ static void xen_idle(void) */ smp_mb(); - local_irq_disable(); - if (!need_resched()) { - ktime_t t0, t1; - u64 t0n, t1n; - - t0 = ktime_get(); - t0n = ktime_to_ns(t0); + if (!need_resched()) safe_halt(); /* enables interrupts racelessly */ - local_irq_disable(); - t1 = ktime_get(); - t1n = ktime_to_ns(t1); - sched_clock_idle_wakeup_event(t1n - t0n); - } - local_irq_enable(); + else + local_irq_enable(); current_thread_info()->status |= TS_POLLING; } #ifdef CONFIG_APM_MODULE @@ -142,7 +122,6 @@ EXPORT_SYMBOL(default_idle); #endif #ifdef CONFIG_HOTPLUG_CPU -extern cpumask_t cpu_initialized; static inline void play_dead(void) { idle_task_exit(); @@ -187,6 +166,7 @@ void cpu_idle(void) if (cpu_is_offline(cpu)) play_dead(); + local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; idle(); } @@ -197,44 +177,6 @@ void cpu_idle(void) } } -static void do_nothing(void *unused) -{ -} - -/* - * cpu_idle_wait - Used to ensure that all the CPUs discard old value of - * pm_idle and update to new pm_idle value. Required while changing pm_idle - * handler on SMP systems. - * - * Caller must have changed pm_idle to the new value before the call. Old - * pm_idle value will not be used by any CPU after the return of this function. - */ -void cpu_idle_wait(void) -{ - smp_mb(); - /* kick all the CPUs so that they exit out of pm_idle */ - smp_call_function(do_nothing, NULL, 0, 1); -} -EXPORT_SYMBOL_GPL(cpu_idle_wait); - -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) -{ -} - -static int __init idle_setup(char *str) -{ - if (!strcmp(str, "poll")) { - printk("using polling idle threads.\n"); - pm_idle = poll_idle; - } - else - return -1; - - boot_option_idle_override = 1; - return 0; -} -early_param("idle", idle_setup); - void __show_registers(struct pt_regs *regs, int all) { unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; @@ -260,7 +202,7 @@ void __show_registers(struct pt_regs *re init_utsname()->version); printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", - 0xffff & regs->cs, regs->ip, regs->flags, + (u16)regs->cs, regs->ip, regs->flags, smp_processor_id()); print_symbol("EIP is at %s\n", regs->ip); @@ -269,8 +211,7 @@ void __show_registers(struct pt_regs *re printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", regs->si, regs->di, regs->bp, sp); printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n", - regs->ds & 0xffff, regs->es & 0xffff, - regs->fs & 0xffff, gs, ss); + (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss); if (!all) return; @@ -367,6 +308,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -437,11 +379,30 @@ int copy_thread(int nr, unsigned long cl return err; } -#ifdef CONFIG_SECCOMP +void +start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) +{ + __asm__("movl %0, %%gs" :: "r"(0)); + regs->fs = 0; + set_fs(USER_DS); + regs->ds = __USER_DS; + regs->es = __USER_DS; + regs->ss = __USER_DS; + regs->cs = __USER_CS; + regs->ip = new_ip; + regs->sp = new_sp; + /* + * Free the old FP and other extended state + */ + free_thread_xstate(current); +} +EXPORT_SYMBOL_GPL(start_thread); + static void hard_disable_TSC(void) { write_cr4(read_cr4() | X86_CR4_TSD); } + void disable_TSC(void) { preempt_disable(); @@ -453,11 +414,47 @@ void disable_TSC(void) hard_disable_TSC(); preempt_enable(); } + static void hard_enable_TSC(void) { write_cr4(read_cr4() & ~X86_CR4_TSD); } -#endif /* CONFIG_SECCOMP */ + +static void enable_TSC(void) +{ + preempt_disable(); + if (test_and_clear_thread_flag(TIF_NOTSC)) + /* + * Must flip the CPU state synchronously with + * TIF_NOTSC in the current running context. + */ + hard_enable_TSC(); + preempt_enable(); +} + +int get_tsc_mode(unsigned long adr) +{ + unsigned int val; + + if (test_thread_flag(TIF_NOTSC)) + val = PR_TSC_SIGSEGV; + else + val = PR_TSC_ENABLE; + + return put_user(val, (unsigned int __user *)adr); +} + +int set_tsc_mode(unsigned int val) +{ + if (val == PR_TSC_SIGSEGV) + disable_TSC(); + else if (val == PR_TSC_ENABLE) + enable_TSC(); + else + return -EINVAL; + + return 0; +} static noinline void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p) @@ -473,12 +470,12 @@ __switch_to_xtra(struct task_struct *pre /* we clear debugctl to make sure DS * is not in use when we change it */ debugctl = 0; - wrmsrl(MSR_IA32_DEBUGCTLMSR, 0); + update_debugctlmsr(0); wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0); } if (next->debugctlmsr != debugctl) - wrmsr(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr, 0); + update_debugctlmsr(next->debugctlmsr); if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { set_debugreg(next->debugreg0, 0); @@ -490,7 +487,6 @@ __switch_to_xtra(struct task_struct *pre set_debugreg(next->debugreg7, 7); } -#ifdef CONFIG_SECCOMP if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ test_tsk_thread_flag(next_p, TIF_NOTSC)) { /* prev and next are different */ @@ -499,7 +495,6 @@ __switch_to_xtra(struct task_struct *pre else hard_enable_TSC(); } -#endif #ifdef X86_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) @@ -637,7 +632,7 @@ struct task_struct * __switch_to(struct /* we're going to use this soon, after a few expensive things */ if (next_p->fpu_counter > 5) - prefetch(&next->i387.fxsave); + prefetch(next->xstate); /* * Now maybe handle debug registers @@ -658,8 +653,11 @@ struct task_struct * __switch_to(struct /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter > 5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); /* --- head-2011-03-11.orig/arch/x86/kernel/process_64-xen.c 2011-02-02 08:32:11.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/process_64-xen.c 2011-02-02 08:32:46.000000000 +0100 @@ -39,6 +39,7 @@ #include #include #include +#include #include #include @@ -101,17 +102,6 @@ void exit_idle(void) __exit_idle(); } -/* - * On SMP it's slightly faster (but much more power-consuming!) - * to poll the ->need_resched flag instead of waiting for the - * cross-CPU IPI to arrive. Use this option with caution. - */ -static void poll_idle(void) -{ - local_irq_enable(); - cpu_relax(); -} - static void xen_idle(void) { current_thread_info()->status &= ~TS_POLLING; @@ -120,20 +110,10 @@ static void xen_idle(void) * test NEED_RESCHED: */ smp_mb(); - local_irq_disable(); - if (!need_resched()) { - ktime_t t0, t1; - u64 t0n, t1n; - - t0 = ktime_get(); - t0n = ktime_to_ns(t0); + if (!need_resched()) safe_halt(); /* enables interrupts racelessly */ - local_irq_disable(); - t1 = ktime_get(); - t1n = ktime_to_ns(t1); - sched_clock_idle_wakeup_event(t1n - t0n); - } - local_irq_enable(); + else + local_irq_enable(); current_thread_info()->status |= TS_POLLING; } @@ -194,45 +174,6 @@ void cpu_idle(void) } } -static void do_nothing(void *unused) -{ -} - -/* - * cpu_idle_wait - Used to ensure that all the CPUs discard old value of - * pm_idle and update to new pm_idle value. Required while changing pm_idle - * handler on SMP systems. - * - * Caller must have changed pm_idle to the new value before the call. Old - * pm_idle value will not be used by any CPU after the return of this function. - */ -void cpu_idle_wait(void) -{ - smp_mb(); - /* kick all the CPUs so that they exit out of pm_idle */ - smp_call_function(do_nothing, NULL, 0, 1); -} -EXPORT_SYMBOL_GPL(cpu_idle_wait); - -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) -{ -} - -static int __init idle_setup(char *str) -{ - if (!strcmp(str, "poll")) { - printk("using polling idle threads.\n"); - pm_idle = poll_idle; - } else if (!strcmp(str, "mwait")) - force_mwait = 1; - else - return -1; - - boot_option_idle_override = 1; - return 0; -} -early_param("idle", idle_setup); - /* Prints also some state that isn't saved in the pt_regs */ void __show_regs(struct pt_regs * regs) { @@ -359,6 +300,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } @@ -470,6 +412,82 @@ out: return err; } +void +start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) +{ + asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0)); + load_gs_index(0); + regs->ip = new_ip; + regs->sp = new_sp; + regs->cs = __USER_CS; + regs->ss = __USER_DS; + regs->flags = 0x200; + set_fs(USER_DS); + /* + * Free the old FP and other extended state + */ + free_thread_xstate(current); +} +EXPORT_SYMBOL_GPL(start_thread); + +static void hard_disable_TSC(void) +{ + write_cr4(read_cr4() | X86_CR4_TSD); +} + +void disable_TSC(void) +{ + preempt_disable(); + if (!test_and_set_thread_flag(TIF_NOTSC)) + /* + * Must flip the CPU state synchronously with + * TIF_NOTSC in the current running context. + */ + hard_disable_TSC(); + preempt_enable(); +} + +static void hard_enable_TSC(void) +{ + write_cr4(read_cr4() & ~X86_CR4_TSD); +} + +static void enable_TSC(void) +{ + preempt_disable(); + if (test_and_clear_thread_flag(TIF_NOTSC)) + /* + * Must flip the CPU state synchronously with + * TIF_NOTSC in the current running context. + */ + hard_enable_TSC(); + preempt_enable(); +} + +int get_tsc_mode(unsigned long adr) +{ + unsigned int val; + + if (test_thread_flag(TIF_NOTSC)) + val = PR_TSC_SIGSEGV; + else + val = PR_TSC_ENABLE; + + return put_user(val, (unsigned int __user *)adr); +} + +int set_tsc_mode(unsigned int val) +{ + if (val == PR_TSC_SIGSEGV) + disable_TSC(); + else if (val == PR_TSC_ENABLE) + enable_TSC(); + else + return -EINVAL; + + return 0; +} + /* * This special macro can be used to load a debugging register */ @@ -489,12 +507,12 @@ static inline void __switch_to_xtra(stru /* we clear debugctl to make sure DS * is not in use when we change it */ debugctl = 0; - wrmsrl(MSR_IA32_DEBUGCTLMSR, 0); + update_debugctlmsr(0); wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr); } if (next->debugctlmsr != debugctl) - wrmsrl(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr); + update_debugctlmsr(next->debugctlmsr); if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { loaddebug(next, 0); @@ -506,6 +524,15 @@ static inline void __switch_to_xtra(stru loaddebug(next, 7); } + if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ + test_tsk_thread_flag(next_p, TIF_NOTSC)) { + /* prev and next are different */ + if (test_tsk_thread_flag(next_p, TIF_NOTSC)) + hard_disable_TSC(); + else + hard_enable_TSC(); + } + #ifdef X86_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); @@ -545,7 +572,7 @@ __switch_to(struct task_struct *prev_p, /* we're going to use this soon, after a few expensive things */ if (next_p->fpu_counter>5) - prefetch(&next->i387.fxsave); + prefetch(next->xstate); /* * This is basically '__unlazy_fpu', except that we queue a @@ -676,8 +703,11 @@ __switch_to(struct task_struct *prev_p, /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter>5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); return prev_p; } --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ head-2011-03-11/arch/x86/kernel/setup-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -0,0 +1,143 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_LOCAL_APIC +unsigned int num_processors; +unsigned disabled_cpus __cpuinitdata; +#ifndef CONFIG_XEN +/* Processor that is doing the boot up */ +unsigned int boot_cpu_physical_apicid = -1U; +EXPORT_SYMBOL(boot_cpu_physical_apicid); + +DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID; +EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid); + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map; +#endif +#endif + +#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) +/* + * Copy data used in early init routines from the initial arrays to the + * per cpu data areas. These arrays then become expendable and the + * *_early_ptr's are zeroed indicating that the static arrays are gone. + */ +static void __init setup_per_cpu_maps(void) +{ +#ifndef CONFIG_XEN + int cpu; + + for_each_possible_cpu(cpu) { + per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu]; + per_cpu(x86_bios_cpu_apicid, cpu) = + x86_bios_cpu_apicid_init[cpu]; +#ifdef CONFIG_NUMA + per_cpu(x86_cpu_to_node_map, cpu) = + x86_cpu_to_node_map_init[cpu]; +#endif + } + + /* indicate the early static arrays will soon be gone */ + x86_cpu_to_apicid_early_ptr = NULL; + x86_bios_cpu_apicid_early_ptr = NULL; +#ifdef CONFIG_NUMA + x86_cpu_to_node_map_early_ptr = NULL; +#endif +#endif +} + +#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP +cpumask_t *cpumask_of_cpu_map __read_mostly; +EXPORT_SYMBOL(cpumask_of_cpu_map); + +/* requires nr_cpu_ids to be initialized */ +static void __init setup_cpumask_of_cpu(void) +{ + int i; + + /* alloc_bootmem zeroes memory */ + cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids); + for (i = 0; i < nr_cpu_ids; i++) + cpu_set(i, cpumask_of_cpu_map[i]); +} +#else +static inline void setup_cpumask_of_cpu(void) { } +#endif + +#ifdef CONFIG_X86_32 +/* + * Great future not-so-futuristic plan: make i386 and x86_64 do it + * the same way + */ +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(__per_cpu_offset); +#endif + +/* + * Great future plan: + * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. + * Always point %gs to its beginning + */ +void __init setup_per_cpu_areas(void) +{ + int i, highest_cpu = 0; + unsigned long size; + +#ifdef CONFIG_HOTPLUG_CPU + prefill_possible_map(); +#endif + + /* Copy section for each CPU (we discard the original) */ + size = PERCPU_ENOUGH_ROOM; + printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", + size); + + for_each_possible_cpu(i) { + char *ptr; +#ifndef CONFIG_NEED_MULTIPLE_NODES + ptr = alloc_bootmem_pages(size); +#else + int node = early_cpu_to_node(i); + if (!node_online(node) || !NODE_DATA(node)) { + ptr = alloc_bootmem_pages(size); + printk(KERN_INFO + "cpu %d has no node or node-local memory\n", i); + } + else + ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); +#endif + if (!ptr) + panic("Cannot allocate cpu data for CPU %d\n", i); +#ifdef CONFIG_X86_64 + cpu_pda(i)->data_offset = ptr - __per_cpu_start; +#else + __per_cpu_offset[i] = ptr - __per_cpu_start; +#endif + memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + + highest_cpu = i; + } + + nr_cpu_ids = highest_cpu + 1; + printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids); + + /* Setup percpu data maps */ + setup_per_cpu_maps(); + + /* Setup cpumask_of_cpu map */ + setup_cpumask_of_cpu(); +} + +#endif --- head-2011-03-11.orig/arch/x86/kernel/setup64-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/setup64-xen.c 2011-01-31 18:07:35.000000000 +0100 @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,7 @@ #include #include #include +#include #ifdef CONFIG_XEN #include #endif @@ -81,8 +83,8 @@ int force_personality32 = 0; Control non executable heap for 32bit processes. To control the stack too use noexec=off -on PROT_READ does not imply PROT_EXEC for 32bit processes -off PROT_READ implies PROT_EXEC (default) +on PROT_READ does not imply PROT_EXEC for 32bit processes (default) +off PROT_READ implies PROT_EXEC */ static int __init nonx32_setup(char *str) { @@ -94,85 +96,6 @@ static int __init nonx32_setup(char *str } __setup("noexec32=", nonx32_setup); -/* - * Copy data used in early init routines from the initial arrays to the - * per cpu data areas. These arrays then become expendable and the - * *_early_ptr's are zeroed indicating that the static arrays are gone. - */ -static void __init setup_per_cpu_maps(void) -{ -#ifndef CONFIG_XEN - int cpu; - - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - if (per_cpu_offset(cpu)) { -#endif - per_cpu(x86_cpu_to_apicid, cpu) = - x86_cpu_to_apicid_init[cpu]; - per_cpu(x86_bios_cpu_apicid, cpu) = - x86_bios_cpu_apicid_init[cpu]; -#ifdef CONFIG_NUMA - per_cpu(x86_cpu_to_node_map, cpu) = - x86_cpu_to_node_map_init[cpu]; -#endif -#ifdef CONFIG_SMP - } - else - printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n", - cpu); -#endif - } - - /* indicate the early static arrays will soon be gone */ - x86_cpu_to_apicid_early_ptr = NULL; - x86_bios_cpu_apicid_early_ptr = NULL; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = NULL; -#endif -#endif -} - -/* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning - */ -void __init setup_per_cpu_areas(void) -{ - int i; - unsigned long size; - -#ifdef CONFIG_HOTPLUG_CPU - prefill_possible_map(); -#endif - - /* Copy section for each CPU (we discard the original) */ - size = PERCPU_ENOUGH_ROOM; - - printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); - for_each_cpu_mask (i, cpu_possible_map) { - char *ptr; -#ifndef CONFIG_NEED_MULTIPLE_NODES - ptr = alloc_bootmem_pages(size); -#else - int node = early_cpu_to_node(i); - - if (!node_online(node) || !NODE_DATA(node)) - ptr = alloc_bootmem_pages(size); - else - ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); -#endif - if (!ptr) - panic("Cannot allocate cpu data for CPU %d\n", i); - cpu_pda(i)->data_offset = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - } - - /* setup percpu data maps early */ - setup_per_cpu_maps(); -} - #ifdef CONFIG_XEN static void __init_refok switch_pt(int cpu) { @@ -410,6 +333,17 @@ void __cpuinit cpu_init (void) #endif load_LDT(&init_mm.context); +#ifdef CONFIG_KGDB + /* + * If the kgdb is connected no debug regs should be altered. This + * is only applicable when KGDB and a KGDB I/O module are built + * into the kernel and you are using early debugging with + * kgdbwait. KGDB will control the kernel HW breakpoint registers. + */ + if (kgdb_connected && arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + else { +#endif /* * Clear all 6 debug registers: */ @@ -420,10 +354,17 @@ void __cpuinit cpu_init (void) set_debugreg(0UL, 3); set_debugreg(0UL, 6); set_debugreg(0UL, 7); +#ifdef CONFIG_KGDB + /* If the kgdb is connected no debug regs should be altered. */ + } +#endif fpu_init(); asm ("pushfq; popq %0" : "=rm" (kernel_eflags)); if (raw_irqs_disabled()) kernel_eflags &= ~X86_EFLAGS_IF; + + if (is_uv_system()) + uv_cpu_init(); } --- head-2011-03-11.orig/arch/x86/kernel/setup_32-xen.c 2011-01-31 18:01:51.000000000 +0100 +++ head-2011-03-11/arch/x86/kernel/setup_32-xen.c 2011-03-04 15:07:31.000000000 +0100 @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -49,6 +50,7 @@ #include #include #include +#include #include