qubes-linux-kernel/patches.drivers/elousb.patch

From: Jiri Kosina <jkosina@suse.cz>
Subject: Elo USB touchscreen driver
Patch-mainline: will be submitted for 2.6.28
References: FATE#304972

This is a driver for Elo USB touchscreen devices.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>

---
 drivers/hid/hid-core.c             |    2 
 drivers/hid/hid-ids.h              |    2 
 drivers/input/touchscreen/Kconfig  |   12 +
 drivers/input/touchscreen/Makefile |    1 
 drivers/input/touchscreen/elousb.c |  305 +++++++++++++++++++++++++++++++++++++
 5 files changed, 322 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1643,6 +1643,8 @@ static const struct hid_device_id hid_ig
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_4000U) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_4500U) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -216,7 +216,9 @@
 #define USB_VENDOR_ID_DREAM_CHEEKY	0x1d34
 
 #define USB_VENDOR_ID_ELO		0x04E7
+#define USB_DEVICE_ID_ELO_4000U		0x0009
 #define USB_DEVICE_ID_ELO_TS2700	0x0020
+#define USB_DEVICE_ID_ELO_4500U		0x0030
 
 #define USB_VENDOR_ID_EMS		0x2006
 #define USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II 0x0118
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -214,6 +214,18 @@ config TOUCHSCREEN_ELO
 	  To compile this driver as a module, choose M here: the
 	  module will be called elo.
 
+config TOUCHSCREEN_ELOUSB
+       tristate "Elo USB touchscreens"
+       select USB
+       help
+         Say Y here if you have an Elo USB touchscreen connected to
+         your system.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called elousb.
+
 config TOUCHSCREEN_WACOM_W8001
 	tristate "Wacom W8001 penabled serial touchscreen"
 	select SERIO
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= h
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
+obj-$(CONFIG_TOUCHSCREEN_ELOUSB)	+= elousb.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
--- /dev/null
+++ b/drivers/input/touchscreen/elousb.c
@@ -0,0 +1,305 @@
+/*
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ *
+ *  Elo USB touchscreen support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/input.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.1"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
+#define DRIVER_DESC "Elo USB touchscreen driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+struct elousb {
+	char name[128];
+	char phys[64];
+	struct usb_device *usbdev;
+	struct input_dev *dev;
+	struct urb *irq;
+
+	unsigned char *data;
+	dma_addr_t data_dma;
+};
+
+static void elousb_irq(struct urb *urb)
+{
+	struct elousb *elo = urb->context;
+	unsigned char *data = elo->data;
+	struct input_dev *dev = elo->dev;
+	int status;
+
+	switch (urb->status) {
+		case 0:            /* success */
+			break;
+		case -ECONNRESET:    /* unlink */
+		case -ENOENT:
+		case -ESHUTDOWN:
+			return;
+			/* -EPIPE:  should clear the halt */
+		default:        /* error */
+			goto resubmit;
+	}
+
+	if (data[0] != 'T')    /* Mandatory ELO packet marker */
+		return;
+
+
+	input_report_abs(dev, ABS_X, ((u32)data[3] << 8) | data[2]);
+	input_report_abs(dev, ABS_Y, ((u32)data[5] << 8) | data[4]);
+
+	input_report_abs(dev, ABS_PRESSURE,
+			(data[1] & 0x80) ? (((u32)data[7] << 8) | data[6]): 0);
+
+	if (data[1] & 0x03) {
+		input_report_key(dev, BTN_TOUCH, 1);
+		input_sync(dev);
+	}
+
+	if (data[1] & 0x04)
+		input_report_key(dev, BTN_TOUCH, 0);
+
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb (urb, GFP_ATOMIC);
+	if (status)
+		err ("can't resubmit intr, %s-%s/input0, status %d",
+				elo->usbdev->bus->bus_name,
+				elo->usbdev->devpath, status);
+}
+
+static int elousb_open(struct input_dev *dev)
+{
+	struct elousb *elo = input_get_drvdata(dev);
+
+	elo->irq->dev = elo->usbdev;
+	if (usb_submit_urb(elo->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void elousb_close(struct input_dev *dev)
+{
+	struct elousb *elo = input_get_drvdata(dev);
+
+	usb_kill_urb(elo->irq);
+}
+
+static int elousb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct hid_descriptor *hdesc;
+	struct elousb *elo;
+	struct input_dev *input_dev;
+	int pipe, i;
+	unsigned int rsize = 0;
+	int error = -ENOMEM;
+	char *rdesc;
+
+	interface = intf->cur_altsetting;
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+	if (!(endpoint->bEndpointAddress & USB_DIR_IN))
+		return -ENODEV;
+	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+		return -ENODEV;
+
+	if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
+			(!interface->desc.bNumEndpoints ||
+			 usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
+		err("HID class descriptor not present");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < hdesc->bNumDescriptors; i++)
+		if (hdesc->desc[i].bDescriptorType == HID_DT_REPORT)
+			rsize = le16_to_cpu(hdesc->desc[i].wDescriptorLength);
+
+	if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
+		err("weird size of report descriptor (%u)", rsize);
+		return -ENODEV;
+	}
+
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+
+	elo = kzalloc(sizeof(struct elousb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!elo || !input_dev)
+		goto fail1;
+
+	elo->data = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &elo->data_dma);
+	if (!elo->data)
+		goto fail1;
+
+	elo->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!elo->irq)
+		goto fail2;
+
+	if (!(rdesc = kmalloc(rsize, GFP_KERNEL)))
+		goto fail3;
+
+	elo->usbdev = dev;
+	elo->dev = input_dev;
+
+	if ((error = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+					HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
+					interface->desc.bInterfaceNumber,
+					NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) {
+		err("setting HID idle timeout failed, error %d", error);
+		error = -ENODEV;
+		goto fail4;
+	}
+
+	if ((error = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+					USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
+					HID_DT_REPORT << 8, interface->desc.bInterfaceNumber,
+					rdesc, rsize, USB_CTRL_GET_TIMEOUT)) < rsize) {
+		err("reading HID report descriptor failed, error %d", error);
+		error = -ENODEV;
+		goto fail4;
+	}
+
+	if (dev->manufacturer)
+		strlcpy(elo->name, dev->manufacturer, sizeof(elo->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(elo->name, " ", sizeof(elo->name));
+		strlcat(elo->name, dev->product, sizeof(elo->name));
+	}
+
+	if (!strlen(elo->name))
+		snprintf(elo->name, sizeof(elo->name),
+				"Elo touchscreen %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+
+	usb_make_path(dev, elo->phys, sizeof(elo->phys));
+	strlcat(elo->phys, "/input0", sizeof(elo->phys));
+
+	input_dev->name = elo->name;
+	input_dev->phys = elo->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+	set_bit(ABS_PRESSURE, input_dev->absbit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4000, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 3840, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 256, 0, 0);
+
+	input_set_drvdata(input_dev, elo);
+
+	input_dev->open = elousb_open;
+	input_dev->close = elousb_close;
+
+	usb_fill_int_urb(elo->irq, dev, pipe, elo->data, 8,
+			elousb_irq, elo, endpoint->bInterval);
+	elo->irq->transfer_dma = elo->data_dma;
+	elo->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	input_register_device(elo->dev);
+
+	usb_set_intfdata(intf, elo);
+	return 0;
+
+fail4:
+	kfree(rdesc);
+fail3:
+	usb_free_urb(elo->irq);
+fail2:
+	usb_buffer_free(dev, 8, elo->data, elo->data_dma);
+fail1:
+	input_free_device(input_dev);
+	kfree(elo);
+	return -ENOMEM;
+}
+
+static void elousb_disconnect(struct usb_interface *intf)
+{
+	struct elousb *elo = usb_get_intfdata (intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (elo) {
+		usb_kill_urb(elo->irq);
+		input_unregister_device(elo->dev);
+		usb_free_urb(elo->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 8, elo->data, elo->data_dma);
+		kfree(elo);
+	}
+}
+
+static struct usb_device_id elousb_id_table [] = {
+	{ USB_DEVICE(0x04e7, 0x0009) }, /* CarrolTouch 4000U */
+	{ USB_DEVICE(0x04e7, 0x0030) }, /* CarrolTouch 4500U */
+	{ }    /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, elousb_id_table);
+
+static struct usb_driver elousb_driver = {
+	.name        = "elousb",
+	.probe        = elousb_probe,
+	.disconnect    = elousb_disconnect,
+	.id_table    = elousb_id_table,
+};
+
+static int __init elousb_init(void)
+{
+	int retval = usb_register(&elousb_driver);
+	if (retval == 0)
+		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" DRIVER_DESC);
+	return retval;
+}
+
+static void __exit elousb_exit(void)
+{
+	usb_deregister(&elousb_driver);
+}
+
+module_init(elousb_init);
+module_exit(elousb_exit);