qubes-installer-qubes-os/anaconda/docs/boot-options.txt

Anaconda Boot Options
=====================
:Author: Anaconda Developers <anaconda-devel-list@redhat.com>

//Actual authors:
//  Will Woods <wwoods@redhat.com>
//  Anne Mulhern <amulhern@redhat.com>

// written in asciidoc: http://www.methods.co.nz/asciidoc/
// here's a few macros to improve readability in the text below..
:dracutdoc:    http://www.kernel.org/pub/linux/utils/boot/dracut/dracut.html
:dracutkernel: {dracutdoc}#dracutcmdline7[`dracut.kernel(7)`]
:dracutnet:    {dracutdoc}#_network[the "Network" section of `dracut.kernel(7)`]
:dracutdebug:  {dracutdoc}#_troubleshooting[dracut "Troubleshooting" guide]
:anacondawiki: https://fedoraproject.org/wiki/Anaconda[Anaconda wiki]


These are the boot options that are useful when starting Anaconda. For more
information refer to the appropriate Installation Guide for your release and
to the {anacondawiki}.

Anaconda bootup is handled by dracut, so most of the kernel arguments handled
by dracut are also valid. See {dracutkernel} for details on those options.

Throughout this guide, installer-specific options are prefixed with
`inst` (e.g. `inst.ks`). Options specified without the `inst` prefix are
recognized, but the prefix may be required in a future release.

[[repo]]
Installation Source
-------------------

.Installable Trees
[NOTE]
==============================================================================
An _installable tree_ is a directory structure containing installer
images, packages, and repodata.
footnote:[an installable tree must contain a valid `.treeinfo` file for
`inst.repo` or `inst.stage2` to work.]

Usually this is either a copy of the DVD media (or loopback-mounted DVD
image), or the `<arch>/os/` directory on the Fedora mirrors.
==============================================================================

[[inst.repo]]
=== inst.repo ===
This gives the location of the _Install Source_ - that is, the place where the
installer can find its images and packages. It can be specified in a few
different ways:

`inst.repo=cdrom`::
Search the system's CDROM drives for installer media. This is the default.

`inst.repo=cdrom:<device>`::
Look for installer media in the specified disk device.

`inst.repo=hd:<device>:<path>`::
Mount the given disk partition and install from the given path.

`inst.repo=[http,https,ftp]://<host>/<path>`::
Look for an installable tree at the given URL.

`inst.repo=nfs:[<options>:]<server>:/<path>`::
Mount the given NFS server and path. Uses NFS version *3* by default.
+
You can specify what version of the NFS protocol to use by adding +nfsvers=X+
to the `options`.

[[diskdev]]
.Disk Device Names
[NOTE]
======================================================================
Disk devices may be specified with any of the following forms:

Kernel Device Name::
    `/dev/sda1`, `sdb2`
Filesystem Label::
    `LABEL=FLASH`, `LABEL=Fedora`, `CDLABEL=Fedora\x2017\x20x86_64`
Filesystem UUID::
    `UUID=8176c7bf-04ff-403a-a832-9557f94e61db`

Non-alphanumeric characters should be escaped with +\xNN+, where
'NN' is the hexidecimal representation of the character (e.g. +\x20+ for
the space character (' ').
======================================================================

=== inst.stage2 ===
This specifies the location to fetch only the installer runtime image;
packages will be ignored. Otherwise the same as <<inst.repo,`inst.repo`>>.

[[kickstart]]
Kickstart
---------

=== inst.ks ===
Give the location of a kickstart file to be used to automate the install.
Locations may be specified using any of the formats allowed for
<<inst.repo,`inst.repo`>>.

For any format the `<path>` component defaults to `/ks.cfg` if it is omitted.

If `inst.ks` is used without a value, the installer will look for
`nfs:<next_server>:/<filename>`:

* `<next_server>` is the DHCP "next-server" option, or the IP of the DHCP server itself,
* `<filename>` is the DHCP "filename" option, or `/kickstart/`, and
* if the filename given ends in `/`, `<ip>-kickstart` is added
* example:
** DHCP server: `192.168.122.1`
** client address: `192.168.122.100`
*** kickstart file: `nfs:192.168.122.1:/kickstart/192.168.122.100-kickstart`

==== inst.ks.sendmac ====
Add headers to outgoing HTTP requests which include the MAC addresses of all
network interfaces. The header is of the form:

* `X-RHN-Provisioning-MAC-0: eth0 01:23:45:67:89:ab`

This is helpful when using `inst.ks=http...` to provision systems.

==== inst.ks.sendsn ====
Add a header to outgoing HTTP requests which includes the system's serial
number. footnote:[as read from `/sys/class/dmi/id/product_serial`]
The header is of the form:

* `X-System-Serial-Number: <serial>`

[[network]]
Network Options
---------------
Initial network setup is handled by dracut. For detailed information consult
{dracutnet}.

The most common dracut network options are covered here, along with some
installer-specific options.

=== ip ===
Configure one (or more) network interfaces. You can use multiple `ip`
arguments to configure multiple interfaces, but if you do you must specify an
interface for every `ip=` argument, and you must specify which interface
is the primary boot interface with `bootdev`.

Accepts a few different forms; the most common are:

`ip=<dhcp|dhcp6|auto6|ibft>`::
Try to bring up every interface using the given autoconf method.  Defaults
to `ip=dhcp` if network is required by `inst.repo`, `inst.ks`, `inst.updates`,
etc.

`ip=<interface>:<autoconf>`::
Bring up only one interface using the given autoconf method, e.g.
`ip=eth0:dhcp`.

`ip=<ip>::<gateway>:<netmask>:<hostname>:<interface>:none`::
Bring up the given interface with a static network config, where:
[horizontal]
  `<ip>`::: The client IP address. IPv6 addresses may be specified by putting
            them in square brackets, like so: `[2001:DB8::1]`.
  `<gateway>`::: The default gateway. IPv6 addresses are accepted here too.
  `<netmask>`::: The netmask (e.g. `255.255.255.0`) or prefix (e.g. `64`).
  `<hostname>`::: Hostname for the client machine. This component is optional.

`ip=<ip>::<gateway>:<netmask>:<hostname>:<interface>:<autoconf>:<mtu>`::
Bring up the given interface with the given autoconf method, but override the
automatically obtained IP/gateway/etc. with the provided values.
+
Technically all of the items are optional, so if you want to use dhcp but also
set a hostname you can use `ip=::::<hostname>::dhcp`.

=== nameserver ===
Specify the address of a nameserver to use. May be used multiple times.

=== bootdev ===
Specify which interface is the boot device. Required if multiple ip=
options are used.

=== ifname ===
`ifname=<interface>:<MAC>`::
Assign the given interface name to the network device with the given MAC. May
be used multiple times.

=== inst.dhcpclass ===
Set the DHCP vendor class identifier.
footnote:[ISC `dhcpd` will see this value as "option
vendor-class-identifier".] Defaults to `anaconda-$(uname -srm)`.


Console / Display Options
-------------------------

[[console]]
=== console ===
This is a kernel option that specifies what device to use as the primary
console. For example, if your console should be on the first serial port, use
`console=ttyS0`.

You can use multiple `console=` options; boot message will be displayed on
all consoles, but anaconda will put its display on the last console listed.

Implies <<inst.text,`inst.text`>>.

=== inst.lang ===
Set the language to be used during installation. The language specified must
be valid for the `lang` kickstart command.

=== inst.geoloc ===
Configure geolocation usage in Anaconda. Geolocation is used to pre-set
language and time zone.

`inst.geoloc=0`:: Disables geolocation.

`inst.geoloc=provider_fedora_geoip`:: Use the Fedora GeoIP API (default).

`inst.geoloc=provider_hostip`:: Use the Hostip.info GeoIP API.

=== inst.keymap ===
Set the keyboard layout to use. The layout specified must be valid for use with
the `keyboard` kickstart command.

=== inst.cmdline ===
Run the installer in command-line mode. This mode does not
allow any interaction; all options must be specified in a kickstart file or
on the command line.

=== inst.graphical ===
Run the installer in graphical mode. This is the default.

[[inst.text]]
=== inst.text ===
Run the installer using a limited text-based UI. Unless you're using a
kickstart file this probably isn't a good idea; you should use VNC instead.

[[inst.vnc]]
=== inst.vnc ===
Run the installer GUI in a VNC session. You will need a VNC client application
to interact with the installer. VNC sharing is enabled, so multiple clients
may connect.

A system installed with VNC will start in text mode (runlevel 3).

==== inst.vncpassword ====
Set a password on the VNC server used by the installer.

==== inst.vncconnect ====
`inst.vncconnect=<host>[:<port>]`::
Once the install starts, connect to a listening VNC client at the given host.
Default port is 5900.
+
Use with `vncviewer -listen`.

=== inst.headless ===
Specify that the machine being installed onto doesn't have any display
hardware, and that anaconda shouldn't bother looking for it.

=== inst.xdriver ===
Specify the X driver that should be used during installation and on the
installed system.

=== inst.usefbx ===
Use the framebuffer X driver (`fbdev`) rather than a hardware-specific driver.

Equivalent to `inst.xdriver=fbdev`.

=== inst.sshd ===
Start up `sshd` during system installation. You can then ssh in while the
installation progresses to debug or monitor its progress.

*NOTE*: The `root` account has no password by default. You can set one using
the `sshpw` kickstart command.

Debugging and Troubleshooting
-----------------------------

=== inst.mediacheck ===
Verify the installer media before starting the install.

=== inst.rescue ===
Run the rescue environment. This is useful for trying to diagnose and fix
broken systems.

[[inst.updates]]
=== inst.updates ===
Give the location of an `updates.img` to be applied to the installer runtime.
Locations may be specified using any of the formats allowed for `inst.repo`.

For any format the `<path>` component defaults to `/updates.img` if it is
omitted.

=== inst.loglevel ===
`inst.loglevel=<debug|info|warning|error|critical>`::
Set the minimum level required for messages to be logged on a terminal (log
files always contain messages of all levels). The default value is `info`.

=== inst.syslog ===
`inst.syslog=<host>[:<port>]`::
Once installation is running, send log messages to the syslog process on
the given host. The default port is 514 (UDP).
+
Requires the remote syslog process to accept incoming connections.

=== inst.virtiolog ===
Forward logs through the named virtio port (a character device at
`/dev/virtio-ports/<name>`). A port named `org.fedoraproject.anaconda.log.0`
will be used by default, if found.


Deprecated Options
------------------

These options should still be accepted by the installer, but they are
deprecated and may be removed soon.

=== method ===
This is an alias for <<inst.repo,`inst.repo`>>.

=== repo=nfsiso:... ===
The difference between an installable tree and a dir with an `.iso` file is
autodetected, so this is the same as `inst.repo=nfs:`...

=== dns ===
Use <<network,`nameserver`>> instead. Note that `nameserver` does not
accept comma-separated lists; use multiple `nameserver` options instead.

=== netmask, gateway, hostname ===
These can be provided as part of the <<network,`ip`>> option.

=== ip=bootif ===
A PXE-supplied BOOTIF option will be used automatically, so there's no need
for this.

=== ksdevice ===
[horizontal]
_Not present_::     The first device with a usable link is used
`ksdevice=link`::   Ignored (this is the same as the default behavior)
`ksdevice=bootif`:: Ignored (this is the default if `BOOTIF=` is present)
`ksdevice=ibft`::   Replaced with <<network, `ip=ibft`>>
`ksdevice=<MAC>`::  Replaced with <<network, `BOOTIF=${MAC/:/-}`>>
`ksdevice=<DEV>`::  Replaced with <<network,`bootdev=$MAC`>>

=== blacklist, nofirewire ===

`modprobe` handles blacklisting kernel modules on its own; try
`modprobe.blacklist=<mod1>,<mod2>...`

You can blacklist the firewire module with `modprobe.blacklist=firewire_ohci`.

Removed Options
---------------

These options are obsolete and have been removed.

=== askmethod, asknetwork ===
Anaconda's initramfs is now is completely non-interactive, so these have been
removed.

Instead, use <<repo,`inst.repo`>> or specify appropriate <<network,`network`>>
options.

=== serial ===
This option was never intended for public use; it was supposed to be used to
force anaconda to use `/dev/ttyS0` as its console when testing it on a live
machine.

Use `console=ttyS0` or similar instead. See <<console,`console`>> for details.

=== updates ===
Use <<inst.updates,`inst.updates`>> instead.

=== essid, wepkey, wpakey ===
Dracut doesn't support wireless networking, so these don't do anything.

=== ethtool ===
Who needs to force half-duplex 10-base-T anymore?

=== gdb ===
This was used to debug `loader`, so it has been removed. There are plenty of
options for debugging dracut-based initramfs - see the {dracutdebug}.

=== ks=floppy ===
We no longer support floppy drives. Try `inst.ks=hd:<device>` instead.

=== display ===
For remote display of the UI, use <<inst.vnc,`inst.vnc`>>.

=== utf8 ===
All this option actually did was set `TERM=vt100`. The default `TERM` setting
works fine these days, so this was no longer necessary.

=== noipv6  ===
ipv6 is built into the kernel and can't be removed. You should be able to
disable it with `ipv6.disable`, though.

=== upgradeany ===
Anaconda doesn't handle upgrades anymore.

// vim: set tw=78 syntax=asciidoc: