# translation of anaconda.master.po to Traditional Chinese
# translation of anaconda.master.po to
# Translation of anaconda to Traditional Chinese
# Copyright (C) 2002 Red Hat, Inc.
# This file is distributed under the same license as the anaconda package.
#
# Ben Wu <hpwu@redhat.com>, 2002,2003, 2004.
# Jouston Huang <jouston@jouston.no-ip.com>, 2004.
# Chester Cheng <ccheng@redhat.com>, 2004, 2005, 2006, 2007, 2008.
# Chester CHENG <ccheng@redhat.com>, 2004.
# Waika Liu <wliu@redhat.com>, 2005.
# Walter Cheuk <wwycheuk@netvigator.com>, 2005-2006.
# Walter Cheuk <wwycheuk@gmail.com>, 2006.
# Terry Chuang <tchuang@redhat.com>, 2008, 2009.
msgid ""
msgstr ""
"Project-Id-Version: anaconda.master\n"
"Report-Msgid-Bugs-To: anaconda-devel-list@redhat.com\n"
"POT-Creation-Date: 2010-05-12 13:54-0500\n"
"PO-Revision-Date: 2009-09-23 16:04+1000\n"
"Last-Translator: Terry Chuang <tchuang@redhat.com>\n"
"Language-Team: Traditional Chinese <en@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: anaconda:339
msgid "Press <enter> for a shell"
msgstr "按下 <enter> 以啟動 shell"

#: anaconda:354 rescue.py:340 rescue.py:366 rescue.py:379 rescue.py:462
#: rescue.py:474 text.py:656 loader/cdinstall.c:228 loader/cdinstall.c:232
#: loader/cdinstall.c:248 loader/cdinstall.c:251 loader/cdinstall.c:427
#: loader/cdinstall.c:431 loader/cdinstall.c:504 loader/dirbrowser.c:128
#: loader/driverdisk.c:266 loader/driverdisk.c:422 loader/driverdisk.c:460
#: loader/driverdisk.c:491 loader/driverdisk.c:526 loader/driverdisk.c:542
#: loader/driverdisk.c:554 loader/driverdisk.c:562 loader/driverdisk.c:722
#: loader/driverdisk.c:761 loader/driverselect.c:78 loader/driverselect.c:178
#: loader/hdinstall.c:115 loader/hdinstall.c:257 loader/hdinstall.c:315
#: loader/hdinstall.c:349 loader/hdinstall.c:421 loader/hdinstall.c:464
#: loader/hdinstall.c:477 loader/kbd.c:119 loader/kickstart.c:132
#: loader/kickstart.c:142 loader/kickstart.c:184 loader/kickstart.c:189
#: loader/kickstart.c:296 loader/kickstart.c:328 loader/kickstart.c:510
#: loader/lang.c:114 loader/lang.c:372 loader/loader.c:429 loader/loader.c:465
#: loader/loader.c:505 loader/loader.c:523 loader/loader.c:540
#: loader/loader.c:577 loader/loader.c:1191 loader/loader.c:1372
#: loader/mediacheck.c:46 loader/mediacheck.c:85 loader/mediacheck.c:92
#: loader/mediacheck.c:101 loader/method.c:277 loader/method.c:351
#: loader/modules.c:381 loader/modules.c:397 loader/net.c:579 loader/net.c:950
#: loader/net.c:1558 loader/net.c:1579 loader/net.c:1851 loader/net.c:1870
#: loader/net.c:1882 loader/nfsinstall.c:91 loader/nfsinstall.c:279
#: loader/nfsinstall.c:296 loader/nfsinstall.c:366 loader/telnetd.c:92
#: loader/urlinstall.c:137 loader/urlinstall.c:159 loader/urlinstall.c:221
#: loader/urlinstall.c:372 loader/urlinstall.c:383 loader/urlinstall.c:390
#: loader/urls.c:258 loader/urls.c:329 loader/urls.c:335
#: textw/constants_text.py:44
msgid "OK"
msgstr "確定"

#: anaconda:361
msgid ""
"You do not have enough RAM to use the graphical installer.  Starting text "
"mode."
msgstr "您沒有足夠的記憶體可使用圖形安裝模式，即將進入文字安裝模式。"

#: anaconda:616
msgid "Starting graphical installation."
msgstr "正在啟動圖形安裝介面。"

#: anaconda:1038
msgid "Would you like to use VNC?"
msgstr "您希望使用 VNC 嗎？"

#: anaconda:1039
msgid ""
"Text mode provides a limited set of installation options.  It does not allow "
"you to specify your own partitioning layout or package selections.  Would "
"you like to use VNC mode instead?"
msgstr ""
"文字模式提供了一組安裝選項。它不允許您指定您自己的分割區格式或套件選擇。您是"
"否希望使用 VNC 模式來代替？"

#: anaconda:1065
msgid "Graphical installation is not available. Starting text mode."
msgstr "無法使用圖形模式安裝。即將進入文字模式。"

#: anaconda:1073
msgid "DISPLAY variable not set. Starting text mode."
msgstr "DISPLAY 變數尚未設定。即將啟動文字模式。"

#: backend.py:148
#, python-format
msgid "Upgrading %s\n"
msgstr "正在升級 %s\n"

#: backend.py:150
#, python-format
msgid "Installing %s\n"
msgstr "正在安裝 %s\n"

#: backend.py:163
msgid "Copying File"
msgstr "正在複製檔案"

#: backend.py:164
msgid "Transferring install image to hard drive"
msgstr "正在傳送安裝映像檔至硬碟"

#: backend.py:174
msgid ""
"An error occurred transferring the install image to your hard drive.  This "
"is often cause by damaged or low quality media."
msgstr ""
"傳送安裝映像檔到您的硬碟時發生了錯誤。這一般是因為低品質的媒介或是媒介損毀所"
"造成的。"

#: backend.py:178
msgid ""
"An error occurred transferring the install image to your hard drive. You are "
"probably out of disk space."
msgstr "傳送安裝映像檔到硬碟時發生錯誤。你的硬碟空間可能不夠。"

#: backend.py:182 image.py:288 livecd.py:198 livecd.py:440
#: partIntfHelpers.py:237 text.py:354 text.py:358 yuminstall.py:416
#: yuminstall.py:805 yuminstall.py:923 yuminstall.py:928 yuminstall.py:1202
#: yuminstall.py:1261 yuminstall.py:1450 yuminstall.py:1472
#: iw/advanced_storage.py:90 iw/advanced_storage.py:100
#: iw/advanced_storage.py:176 iw/advanced_storage.py:179
#: iw/advanced_storage.py:207 iw/autopart_type.py:96 iw/cleardisks_gui.py:43
#: iw/cleardisks_gui.py:53 iw/filter_gui.py:408 iw/osbootwidget.py:211
#: iw/osbootwidget.py:220 iw/raid_dialog_gui.py:215 iw/raid_dialog_gui.py:766
#: iw/raid_dialog_gui.py:805 iw/task_gui.py:69 iw/task_gui.py:170
#: iw/task_gui.py:317 iw/task_gui.py:464 loader/cdinstall.c:228
#: loader/cdinstall.c:504 loader/driverdisk.c:266 loader/driverdisk.c:491
#: loader/driverdisk.c:526 loader/driverdisk.c:554 loader/driverdisk.c:562
#: loader/driverdisk.c:626 loader/hdinstall.c:115 loader/hdinstall.c:315
#: loader/hdinstall.c:421 loader/hdinstall.c:464 loader/hdinstall.c:477
#: loader/kickstart.c:296 loader/lang.c:114 loader/loader.c:429
#: loader/loader.c:540 loader/loader.c:1191 loader/mediacheck.c:46
#: loader/mediacheck.c:85 loader/mediacheck.c:92 loader/method.c:277
#: loader/method.c:351 loader/nfsinstall.c:279 loader/nfsinstall.c:296
#: loader/telnetd.c:92 loader/urlinstall.c:137 loader/urlinstall.c:159
#: loader/urlinstall.c:221 loader/urls.c:329 loader/urls.c:335
#: storage/__init__.py:213 storage/__init__.py:1792 storage/__init__.py:1879
#: textw/netconfig_text.py:282 textw/partition_text.py:186
#: textw/partition_text.py:192 textw/partition_text.py:198
#: textw/partition_text.py:227 textw/partition_text.py:273
#: textw/upgrade_text.py:181 textw/upgrade_text.py:188
msgid "Error"
msgstr "錯誤"

#: bootloader.py:55 bootloader.py:221 bootloader.py:227 gui.py:1154
#: gui.py:1214 image.py:82 installinterfacebase.py:41 text.py:485 text.py:545
#: yuminstall.py:1429 yuminstall.py:1635 yuminstall.py:1670
#: iw/blpasswidget.py:148 iw/upgrade_swap_gui.py:190
#: iw/upgrade_swap_gui.py:198 iw/upgrade_swap_gui.py:205
#: textw/upgrade_text.py:193
msgid "Warning"
msgstr "警告"

#: bootloader.py:56
msgid ""
"Filesystems have already been activated.  You cannot go back past this "
"point.\n"
"\n"
"Would you like to continue with the installation?"
msgstr ""
"您的檔案系統已經啟動了。在這之後您將無法再回到磁碟編輯視窗。\n"
"\n"
"您想要繼續進行安裝嗎？"

#: bootloader.py:60 gui.py:1105 gui.py:1250 gui.py:1465 image.py:91
#: kickstart.py:156 livecd.py:205 livecd.py:447 packages.py:130 upgrade.py:58
#: upgrade.py:197 yuminstall.py:257 yuminstall.py:703 yuminstall.py:925
#: yuminstall.py:930 yuminstall.py:1010 yuminstall.py:1016 yuminstall.py:1170
#: yuminstall.py:1198 yuminstall.py:1251 yuminstall.py:1437 yuminstall.py:1456
#: yuminstall.py:1479 storage/__init__.py:100 storage/__init__.py:109
#: storage/__init__.py:217 storage/__init__.py:1973 storage/dasd.py:139
msgid "_Exit installer"
msgstr "退出安裝程式(_E)"

#: bootloader.py:60 image.py:92 image.py:251 kickstart.py:1338
#: kickstart.py:1377 upgrade.py:58 yuminstall.py:1256 yuminstall.py:1438
#: iw/partition_gui.py:1606 storage/__init__.py:1974
msgid "_Continue"
msgstr "繼續(_C)"

#: bootloader.py:158
msgid "Bootloader"
msgstr "開機管理程式"

#: bootloader.py:158
msgid "Installing bootloader."
msgstr "正在安裝開機管理程式。"

#: bootloader.py:222
msgid ""
"There was an error installing the bootloader.  The system may not be "
"bootable."
msgstr "安裝開機管理程式時發生了錯誤。系統可能將無法啟動。"

#: bootloader.py:228
msgid ""
"No kernel packages were installed on the system.  Bootloader configuration "
"will not be changed."
msgstr "您的系統上未安裝核心套件。您的開機管理程式設定將不會變動。"

#: cmdline.py:56
msgid "Completed"
msgstr "已完成"

#: cmdline.py:64
msgid "In progress"
msgstr "正在進行中"

#: cmdline.py:89 gui.py:1245 kickstart.py:1202 kickstart.py:1210
#: kickstart.py:1248 kickstart.py:1256 text.py:391
#, python-format
msgid ""
"The following error was found while parsing the kickstart configuration "
"file:\n"
"\n"
"%s"
msgstr ""
"以下為剖析 kickstart 設定檔時所發現的錯誤：\n"
"\n"
"%s"

#: cmdline.py:101
msgid ""
"Command line mode requires all choices to be specified in a kickstart "
"configuration file."
msgstr "指令列模式將需要所有選項都指定於 kickstart 設定檔中。"

#: cmdline.py:120 cmdline.py:127 cmdline.py:134 cmdline.py:144 cmdline.py:154
msgid "Can't have a question in command line mode!"
msgstr "在指令列模式中不能輸入問題！"

#: constants.py:74
msgid ""
"An unhandled exception has occurred.  This is most likely a bug.  Please "
"save a copy of the detailed exception and file a bug report"
msgstr ""
"發生無法處理的例外狀況。這極可能是一個程式錯誤。請複製一份完整的文字敘述，並"
"回報程式錯誤"

#: constants.py:80
msgid " with the provider of this software."
msgstr " 給此軟體的供應商。"

#: constants.py:84
#, python-format
msgid " against anaconda at %s"
msgstr " 針對於位於 %s 的 anaconda"

#: gui.py:109
msgid "An error occurred saving screenshots to disk."
msgstr "將螢幕截圖儲存至磁碟時發生了錯誤。"

#: gui.py:120
msgid "Screenshots Copied"
msgstr "螢幕截圖已複製完畢"

#: gui.py:121
msgid ""
"The screenshots have been saved in the directory:\n"
"\n"
"\t/root/anaconda-screenshots/\n"
"\n"
"You can access these when you reboot and login as root."
msgstr ""
"螢幕截圖已儲存到以下目錄：\n"
"\n"
"\t/root/anaconda-screenshots/\n"
"\n"
"在您重新開機並登入為 root 後，您即可存取這些檔案。"

#: gui.py:164
msgid "Saving Screenshot"
msgstr "正在儲存螢幕截圖"

#: gui.py:165
#, python-format
msgid "A screenshot named '%s' has been saved."
msgstr "名為 '%s' 的螢幕截圖已經儲存了。"

#: gui.py:168
msgid "Error Saving Screenshot"
msgstr "儲存螢幕截圖時發生錯誤"

#: gui.py:169
msgid ""
"An error occurred while saving the screenshot.  If this occurred during "
"package installation, you may need to try several times for it to succeed."
msgstr ""
"儲存螢幕截圖時發生錯誤。假如這發生在套件安裝階段，您也許需要多試幾次才能成"
"功。"

#: gui.py:561
msgid "Installation Key"
msgstr "安裝金鑰"

#: gui.py:632 text.py:149
msgid ""
"Choose a passphrase for the encrypted devices. You will be prompted for this "
"passphrase during system boot."
msgstr "請為您的加密裝置選擇一組密碼。您將會在系統啟動時被要求輸入這組密碼。"

#: gui.py:651 gui.py:659 text.py:187 text.py:197
msgid "Error with passphrase"
msgstr "密碼發生錯誤"

#: gui.py:652 text.py:188
msgid "The passphrases you entered were different.  Please try again."
msgstr "您所輸入的密碼不相符，請重新輸入。"

#: gui.py:660
msgid "The passphrase must be at least eight characters long."
msgstr "密碼長度不得少於八個字元。"

#: gui.py:694 text.py:225
#, python-format
msgid ""
"Device %s is encrypted. In order to access the device's contents during "
"installation you must enter the device's passphrase below."
msgstr "%s 裝置已加密。若要在安裝時存取該裝置的內容，您必須輸入裝置的密碼。"

#: gui.py:785 gui.py:1465 partIntfHelpers.py:157 partIntfHelpers.py:342
#: text.py:100 text.py:101 iw/account_gui.py:131 loader/dirbrowser.c:128
#: loader/driverdisk.c:423 loader/kickstart.c:328 loader/loader.c:465
#: loader/loader.c:577 textw/constants_text.py:48
msgid "Cancel"
msgstr "取消"

#: gui.py:797 gui.py:798 gui.py:914 gui.py:915 ui/anaconda.glade.h:3
msgid "_Debug"
msgstr "除錯程式(_D)"

#: gui.py:1155 text.py:486
#, fuzzy, python-format
msgid ""
"Error processing drive:\n"
"\n"
"%(path)s\n"
"%(size)-0.fMB\n"
"%(description)s\n"
"\n"
"This device may need to be reinitialized.\n"
"\n"
"REINITIALIZING WILL CAUSE ALL DATA TO BE LOST!\n"
"\n"
"This action may also be applied to all other disks needing reinitialization.%"
"(details)s"
msgstr ""
"處理磁碟時發生了錯誤：\n"
"\n"
"%s\n"
"%-0.fMB\n"
"%s\n"
"\n"
"這個裝置可能需要被重新初始化。\n"
"\n"
"重新初始化將會失去該磁碟上的所有資料！%s"

#: gui.py:1164 gui.py:1222 text.py:495 text.py:553
msgid "_Ignore"
msgstr "忽略(_I)"

#: gui.py:1165 gui.py:1223 text.py:496 text.py:554
#, fuzzy
msgid "Ignore _all"
msgstr "忽略全部(_I)"

#: gui.py:1166 gui.py:1224 text.py:497 text.py:555
msgid "_Re-initialize"
msgstr "重新初始化(_R)"

#: gui.py:1167 gui.py:1225 text.py:498 text.py:556
#, fuzzy
msgid "Re-ini_tialize all"
msgstr "重新初始化(_R)"

#: gui.py:1215 text.py:546
#, fuzzy, python-format
msgid ""
"Error processing LVM.\n"
"There is inconsistent LVM data on %(msg)s.  You can reinitialize all related "
"PVs (%(pvs)s) which will erase the LVM metadata, or ignore which will "
"preserve the contents.  This action may also be applied to all other PVs "
"with inconsistent metadata."
msgstr ""
"處理 LVM 時發生了錯誤。\n"
"%s 上的 LVM 資料不一致。您可重新初始化所有相關的 PV（%s），這將會清除掉所有"
"的 LVM metadata。或是您可選擇忽略，這便會將內容保留住。"

#: gui.py:1247 text.py:393
msgid "Error Parsing Kickstart Config"
msgstr "剖析 kickstart 設定時發生了錯誤"

#: gui.py:1289
msgid "default:LTR"
msgstr "預設值：LTR"

#: gui.py:1369 text.py:621
msgid "Error!"
msgstr "錯誤！"

#: gui.py:1370 text.py:622
#, python-format
msgid ""
"An error occurred when attempting to load an installer interface component.\n"
"\n"
"className = %s"
msgstr ""
"當試著要載入一個安裝程式的介面元件時發生錯誤。\n"
"\n"
"className = %s"

#: gui.py:1375 image.py:164 image.py:194 packages.py:328
#: storage/__init__.py:1791
msgid "_Exit"
msgstr "離開(_E)"

#: gui.py:1376 image.py:164 image.py:194 livecd.py:205 yuminstall.py:802
#: yuminstall.py:1198 yuminstall.py:1251 yuminstall.py:1456
msgid "_Retry"
msgstr "重試(_R)"

#: gui.py:1378 storage/partitioning.py:276
msgid "The system will now reboot."
msgstr "系統現在將重新啟動。"

#: gui.py:1379 image.py:251 packages.py:332 yuminstall.py:1497
msgid "_Reboot"
msgstr "重新開機(_R)"

#: gui.py:1381
msgid "Exiting"
msgstr "退出"

#: gui.py:1462 livecd.py:126 text.py:270 upgrade.py:188
msgid "Exit installer"
msgstr "退出安裝程式"

#: gui.py:1463
msgid "Are you sure you wish to exit the installer?"
msgstr "您確定要退出安裝程式嗎？"

#: gui.py:1472
#, python-format
msgid "%s Installer"
msgstr "%s 系統安裝程式"

#: gui.py:1478
msgid "Unable to load title bar"
msgstr "無法載入標題列"

#: gui.py:1540
msgid "Install Window"
msgstr "安裝視窗"

#: image.py:83
#, python-format
msgid ""
"The ISO image %s has a size which is not a multiple of 2048 bytes.  This may "
"mean it was corrupted on transfer to this computer.\n"
"\n"
"It is recommended that you exit and abort your installation, but you can "
"choose to continue if you think this is in error."
msgstr ""
"ISO 映像檔 %s 擁有一個非 2048 位元組倍數的大小。這可能代表它傳輸至此電腦時損"
"毀了。\n"
"\n"
"我們建議您退出並結束您的安裝程序，但若您希望的話，您也可選擇繼續進行。"

#: image.py:156
msgid "Couldn't Mount ISO Source"
msgstr "無法掛載 ISO 來源"

#: image.py:157
#, python-format
msgid ""
"An error occurred mounting the source device %s.  This may happen if your "
"ISO images are located on an advanced storage device like LVM or RAID, or if "
"there was a problem mounting a partition.  Click exit to abort the "
"installation."
msgstr ""
"掛載來源裝置 %s 時發生了錯誤。若您的 ISO 映像檔位於一個像是 LVM 或是 RAID 的"
"進階儲存裝置上，或是掛載分割區時發生問題的話，這就有可能會發生。請按下「退"
"出」來終止安裝程序。"

#: image.py:185
msgid "Missing ISO 9660 Image"
msgstr "找不到 ISO 9660 映像檔"

#: image.py:186
#, python-format
msgid ""
"The installer has tried to mount image #%s, but cannot find it on the hard "
"drive.\n"
"\n"
"Please copy this image to the drive and click Retry.  Click Exit to abort "
"the installation."
msgstr ""
"安裝程式試圖掛載映像檔 #%s，但在硬碟上找不到該映像檔。\n"
"\n"
"請將此映像檔複製至硬碟中，然後按下「重試」。請按下「退出」來中止安裝程序。"

#: image.py:241
msgid "Required Install Media"
msgstr "需要的安裝媒體"

#: image.py:242
#, fuzzy, python-format
msgid ""
"The software you have selected to install will require the following %"
"(productName)s %(productVersion)s discs:\n"
"\n"
"%(reqcdstr)s\n"
"Please have these ready before proceeding with the installation.  If you "
"need to abort the installation and exit please select \"Reboot\"."
msgstr ""
"您所選取要安裝的軟體需要下列的 %s %s 光碟片：\n"
"\n"
"%s\n"
"請在開始安裝之前準備好這些光碟片。假如您需要放棄安裝並且重新開機，請選擇「重"
"新開機」。"

#: image.py:251 livecd.py:446 packages.py:332 upgrade.py:196 yuminstall.py:930
#: yuminstall.py:1016 yuminstall.py:1437 yuminstall.py:1479 yuminstall.py:1497
#: ui/anaconda.glade.h:2
msgid "_Back"
msgstr "上一步(_B)"

#: image.py:289
#, python-format
msgid ""
"An error occurred unmounting the disc.  Please make sure you're not "
"accessing %s from the shell on tty2 and then click OK to retry."
msgstr ""
"卸載光碟時發生錯誤。請確定您沒有從 shell 存取 tty2 上的 %s，然後點選「確定」"
"來再試一次。"

#: installclass.py:69
msgid "Install on System"
msgstr "安裝到系統"

#: installinterfacebase.py:42
#, python-format
msgid ""
"Disk %s contains BIOS RAID metadata, but is not part of any recognized BIOS "
"RAID sets. Ignoring disk %s."
msgid_plural ""
"Disks %s contain BIOS RAID metadata, but are not part of any recognized BIOS "
"RAID sets. Ignoring disks %s."
msgstr[0] ""
msgstr[1] ""

#: iutil.py:843
#, fuzzy, python-format
msgid ""
"Error: On open, cannot set reIPL method to %(reipl_type)s (%(filename)s: %(e)"
"s)"
msgstr "錯誤：開啟時無法將 reIPL 模式設為 %s (%s: %s)"

#: iutil.py:854
#, fuzzy, python-format
msgid ""
"Error: On write, cannot set reIPL method to %(reipl_type)s (%(filename)s: %"
"(e)s)"
msgstr "錯誤：寫入時無法將 reIPL 模式設為 %s (%s: %s)"

#: iutil.py:863
#, fuzzy, python-format
msgid ""
"Error: On close, cannot set reIPL method to %(reipl_type)s (%(filename)s: %"
"(e)s)"
msgstr "錯誤：關閉時無法將 reIPL 模式設為 %s (%s: %s)"

#: iutil.py:882
#, fuzzy, python-format
msgid "Error: Could not set %(device)s as reIPL device (%(e)s)"
msgstr "錯誤：無法將 %s 設為 relPL 裝置（%s）"

#: iutil.py:892
#, python-format
msgid "Error: Could not reset loadparm (%s)"
msgstr "錯誤：無法重新啟動 loadparm（%s）"

#: iutil.py:901
#, python-format
msgid "Warning: Could not reset parm (%s)"
msgstr "警告：無法重新啟用 parm（%s）"

#: iutil.py:914
#, python-format
msgid ""
"After shutdown, please perform a manual IPL from DASD device %s to continue "
"installation"
msgstr "關閉之後，請由 DASD 裝置 %s 進行手動式的 IPL 以繼續進行安裝程序"

#: iutil.py:936
#, fuzzy, python-format
msgid "Error: reading FCP property %(syspath_property)s for reIPL (%(e)s)"
msgstr "錯誤：讀取 relPL 的 FCP 內容 %s（%s）"

#: iutil.py:951
#, fuzzy, python-format
msgid "Error: writing FCP property %(reipl_property)s for reIPL (%(e)s)"
msgstr "錯誤：寫入 relPL 的 FCP 內容 %s（%s）"

#: iutil.py:966
#, fuzzy, python-format
msgid ""
"Error: writing default FCP property %(reipl_property)s for reIPL (%(e)s)"
msgstr "錯誤：寫入 relPL（%s）的預設 FCP 內容 %s"

#: iutil.py:981
#, python-format
msgid ""
"After shutdown, please perform a manual IPL from FCP %(device)s with WWPN %"
"(wwpn)s and LUN %(lun)s to continue installation"
msgstr ""
"關閉後，請由 FCP %(device)s 搭配 WWPN %(wwpn)s 和 LUN %(lun)s 來進行手動式的 "
"IPL 以繼續進行安裝程序"

#: iutil.py:998
msgid ""
"After shutdown, please perform a manual IPL from the device now containing /"
"boot to continue installation"
msgstr "關閉後，請由包含著 /boot 的裝置來進行手動式的 IPL 以繼續進行安裝程序"

#: iutil.py:1009
#, fuzzy
msgid "Error determining boot device's disk name"
msgstr "錯誤判斷了掛載點類型"

#: iutil.py:1013
msgid "The mount point /boot or / is on a disk that we are not familiar with"
msgstr "掛載點 /boot 或 / 位於一個我們不熟悉的磁碟上"

#: kickstart.py:115
#, fuzzy, python-format
msgid ""
"There was an error running the kickstart script at line %(lineno)s.  You may "
"examine the output in %(msgs)s.  This is a fatal error and installation will "
"be aborted.  Press the OK button to exit the installer."
msgstr ""
"在行列 %s 上執行 kickstart script 時發生了錯誤。請檢查 %s 中的輸出。這是嚴重"
"的錯誤，您的安裝程序即將中止。請按下「確定」來退出安裝程序。"

#: kickstart.py:123 kickstart.py:125
msgid "Scriptlet Failure"
msgstr "小型程序檔失敗"

#: kickstart.py:150 rescue.py:256 yuminstall.py:698 yuminstall.py:1165
#: iw/task_gui.py:323
msgid "No Network Available"
msgstr "沒有可用的網路"

#: kickstart.py:151
msgid ""
"Encryption key escrow requires networking, but there was an error enabling "
"the network on your system."
msgstr ""
"加密金鑰 escrow 需要網路作業，不過在您的系統上啟用網路時發生了一項錯誤。"

#: kickstart.py:1221
#, python-format
msgid "Error processing %%ksappend lines: %s"
msgstr "處理 %%ksappend 行時發生錯誤：%s"

#: kickstart.py:1224
#, python-format
msgid "Unknown error processing %%ksappend lines: %s"
msgstr "處理 %%ksappend 行時發生不明錯誤：%s"

#: kickstart.py:1279 livecd.py:228
msgid "Post-Installation"
msgstr "安裝後的階段"

#: kickstart.py:1280
msgid "Running post-installation scripts"
msgstr "執行安裝後的程序檔"

#: kickstart.py:1296
msgid "Pre-Installation"
msgstr "安裝前的階段"

#: kickstart.py:1297
msgid "Running pre-installation scripts"
msgstr "執行安裝前的程序檔"

#: kickstart.py:1329
msgid "Missing Package"
msgstr "找不到套件"

#: kickstart.py:1330
#, python-format
msgid ""
"You have specified that the package '%s' should be installed.  This package "
"does not exist. Would you like to continue or abort this installation?"
msgstr ""
"您已經指定安裝「%s」套件。這套件並不存在。請問您要繼續，還是要放棄安裝？"

#: kickstart.py:1336 kickstart.py:1375
msgid "_Abort"
msgstr "放棄(_A)"

#: kickstart.py:1337 kickstart.py:1376
msgid "_Ignore All"
msgstr "忽略全部(_I)"

#: kickstart.py:1367
msgid "Missing Group"
msgstr "找不到群組"

#: kickstart.py:1368
#, python-format
msgid ""
"You have specified that the group '%s' should be installed. This group does "
"not exist. Would you like to continue or abort this installation?"
msgstr ""
"您已經指定安裝「%s」群組。該群組並不存在。請問您要繼續，還是要放棄安裝？"

#: kickstart.py:1483
#, python-format
msgid ""
"The kickstart configuration file is missing required information that "
"anaconda cannot prompt for.  Please add the following sections and try "
"again:\n"
"%s"
msgstr ""
"您的 kickstart 檔案缺少了必要的資訊，anaconda 無法提示這項資訊。請附加下列部"
"份並重新嘗試：:\n"
"%s"

#: livecd.py:121
msgid "Unable to find image"
msgstr "找不到安裝映像檔"

#: livecd.py:122
#, python-format
msgid ""
"The given location isn't a valid %s live CD to use as an installation source."
msgstr "提供的位置並非可使用來作為安裝來源的有效 %s live CD。"

#: livecd.py:180
msgid "Copying live image to hard drive."
msgstr "正在傳送即時映像檔到硬碟。"

#: livecd.py:199
msgid ""
"There was an error installing the live image to your hard drive.  This could "
"be due to bad media.  Please verify your installation media.\n"
"\n"
"If you exit, your system will be left in an inconsistent state that will "
"require reinstallation."
msgstr ""
"將即時安裝映像檔安裝至您的硬碟時發生了問題。這可能是因為媒介上的錯誤。請檢查"
"您的安裝媒介？\n"
"\n"
"若您退出的話，電腦將會處於不一致的狀態，並且可能需要重新安裝。"

#: livecd.py:229
msgid ""
"Performing post-installation filesystem changes.  This may take several "
"minutes."
msgstr "正在進行安裝後的檔案系統變更。這也許會花上數分鐘。"

#: livecd.py:441
#, python-format
msgid ""
"The root filesystem you created is not large enough for this live image "
"(%.2f MB required)."
msgstr "您所建立的 root 檔案系統的大小不足以容納此即時映像檔（需要 %.2f MB）。"

#: network.py:56
msgid "Hostname must be 255 or fewer characters in length."
msgstr "主機名稱長度必須為 255 個或更少個字元。"

#: network.py:62
msgid ""
"Hostname must start with a valid character in the ranges 'a-z', 'A-Z', or '0-"
"9'"
msgstr "主機名稱必須以「a-z」、「A-Z」或「0-9」等有效字元作為起始"

#: network.py:67
msgid ""
"Hostnames can only contain the characters 'a-z', 'A-Z', '0-9', '-', or '.'"
msgstr "主機名稱只能包含「a-z」、「A-Z」、「0-9」、「-」或「.」等字元"

#: network.py:176
msgid "IP address is missing."
msgstr "缺少 IP 位址。"

#: network.py:180
msgid ""
"IPv4 addresses must contain four numbers between 0 and 255, separated by "
"periods."
msgstr "IPv4 位址必須包含四組以小數點分隔，介乎 0 到 255 之間的號碼。"

#: network.py:183
#, python-format
msgid "'%s' is not a valid IPv6 address."
msgstr "「%s」不是有效的 IPv6 位址。"

#: network.py:185
#, python-format
msgid "'%s' is an invalid IP address."
msgstr "「%s」是個無效的 IP 位址。"

#: packages.py:111
msgid "Resizing Failed"
msgstr "重設大小失敗"

#: packages.py:112
#, python-format
msgid "There was an error encountered while resizing the device %s."
msgstr "重設裝置 %s 的大小時發生了錯誤。"

#: packages.py:120
msgid "Migration Failed"
msgstr "遷移失敗"

#: packages.py:121
#, python-format
msgid "An error was encountered while migrating filesystem on device %s."
msgstr "遷移裝置 %s 上的檔案系統時發生了錯誤。"

#: packages.py:130
msgid "_File Bug"
msgstr "提交錯誤(_F)"

#: packages.py:312 packages.py:333
msgid "Warning! This is pre-release software!"
msgstr "警告！這是測試版的軟體！"

#: packages.py:313
#, fuzzy, python-format
msgid ""
"Thank you for downloading this pre-release of %(productName)s.\n"
"\n"
"This is not a final release and is not intended for use on production "
"systems.  The purpose of this release is to collect feedback from testers, "
"and it is not suitable for day to day usage.\n"
"\n"
"To report feedback, please visit:\n"
"\n"
"   %(bugzillaUrl)s\n"
"\n"
"and file a report against '%(fileagainst)s'.\n"
msgstr ""
"感謝您下載 %s 的測試版。\n"
"\n"
"這不是最後的完整版本，所以不適用在日常使用的系統上。這個版本的目的是從測試者"
"收集回應與使用心得，並不適合日常的用途。\n"
"\n"
"如要回報程式問題或錯誤，請造訪：\n"
"\n"
"   %s\n"
"\n"
"並針對 '%s' 呈送一份報告。\n"

#: packages.py:328
msgid "_Install anyway"
msgstr "繼續安裝(_I)"

#: packages.py:331
msgid "Your system will now be rebooted..."
msgstr "您的系統現在將重新開機..."

#: partIntfHelpers.py:41
msgid "Please enter a volume group name."
msgstr "請輸入卷冊群組名稱。"

#: partIntfHelpers.py:45
msgid "Volume Group Names must be less than 128 characters"
msgstr "卷冊群組名稱必須少於 128 個字元"

#: partIntfHelpers.py:48
#, python-format
msgid "Error - the volume group name %s is not valid."
msgstr "錯誤 - 卷冊群組名稱 %s 無效。"

#: partIntfHelpers.py:53
msgid ""
"Error - the volume group name contains illegal characters or spaces.  "
"Acceptable characters are letters, digits, '.' or '_'."
msgstr ""
"錯誤 - 卷冊群組名稱包含不合規格的字元或空白。可使用的字元是字母、數字、'.' "
"或 '_'。"

#: partIntfHelpers.py:63
msgid "Please enter a logical volume name."
msgstr "請輸入一個邏輯卷冊名稱。"

#: partIntfHelpers.py:67
msgid "Logical Volume Names must be less than 128 characters"
msgstr "邏輯卷冊名稱必須少於 128 個字元"

#: partIntfHelpers.py:71
#, python-format
msgid "Error - the logical volume name %s is not valid."
msgstr "錯誤 - 邏輯卷冊名稱 %s 無效。"

#: partIntfHelpers.py:77
msgid ""
"Error - the logical volume name contains illegal characters or spaces.  "
"Acceptable characters are letters, digits, '.' or '_'."
msgstr ""
"錯誤 - 邏輯卷冊名稱包含不合規格的字元或空白。可使用的字元是字母、數字、'.' "
"或 '_'。"

#: partIntfHelpers.py:101
#, python-format
msgid ""
"The mount point %s is invalid.  Mount points must start with '/' and cannot "
"end with '/', and must contain printable characters and no spaces."
msgstr ""
"掛載點 %s 無效。掛載點必須以 '/' 開始而且不能以 '/' 結尾，並只能包含可列印字"
"元，不包括空白。"

#: partIntfHelpers.py:108
msgid "Please specify a mount point for this partition."
msgstr "請為這個分割區指定掛載點。"

#: partIntfHelpers.py:121 partIntfHelpers.py:128
msgid "Unable To Delete"
msgstr "無法刪除"

#: partIntfHelpers.py:122
msgid "You must first select a partition to delete."
msgstr "您必須先選擇要刪除的分割區。"

#: partIntfHelpers.py:153 partIntfHelpers.py:341 iw/lvm_dialog_gui.py:862
msgid "Confirm Delete"
msgstr "確認刪除"

#: partIntfHelpers.py:154
#, python-format
msgid "You are about to delete all partitions on the device '%s'."
msgstr "您即將刪除裝置 '%s' 上的所有分割區。"

#: partIntfHelpers.py:157 partIntfHelpers.py:342 iw/lvm_dialog_gui.py:865
#: iw/lvm_dialog_gui.py:1434 iw/osbootwidget.py:104 iw/partition_gui.py:1819
#: iw/partition_gui.py:1831
msgid "_Delete"
msgstr "刪除(_D)"

#: partIntfHelpers.py:204
msgid "Notice"
msgstr "提示"

#: partIntfHelpers.py:205
#, python-format
msgid ""
"The following partitions were not deleted because they are in use:\n"
"\n"
"%s"
msgstr ""
"以下的分割區無法刪除因為它們正在使用中：\n"
"\n"
"%s"

#: partIntfHelpers.py:220
msgid "Format as Swap?"
msgstr "要格式化成 Swap 分割區嗎？"

#: partIntfHelpers.py:221
#, python-format
msgid ""
"%s has a partition type of 0x82 (Linux swap) but does not appear to be "
"formatted as a Linux swap partition.\n"
"\n"
"Would you like to format this partition as a swap partition?"
msgstr ""
"%s 的分割區類型為 0x82（Linux swap），但尚未格式化為 Linux swap 分割區。\n"
"\n"
"您希望將此分割區格式化為 swap 分割區嗎？"

#: partIntfHelpers.py:236
#, python-format
msgid "You need to select at least one hard drive to install %s."
msgstr "您至少需選擇一部硬碟以便安裝 %s。"

#: partIntfHelpers.py:241
msgid ""
"You have chosen to use a pre-existing partition for this installation "
"without formatting it. We recommend that you format this partition to make "
"sure files from a previous operating system installation do not cause "
"problems with this installation of Linux. However, if this partition "
"contains files that you need to keep, such as home directories, then "
"continue without formatting this partition."
msgstr ""
"您已經選擇使用一個既有的分割區來進行安裝，且選擇不格式化，我們建議您格式化此"
"分割區，以確保之前安裝的作業系統檔案不會影響到這次的 Linux 安裝。然而，假如該"
"分割區含有您想要保留的檔案（例如家目錄），您可以選擇繼續而不對此分割區進行格"
"式化。"

#: partIntfHelpers.py:249
msgid "Format?"
msgstr "要格式化嗎？"

#: partIntfHelpers.py:249 iw/partition_gui.py:1604
msgid "_Modify Partition"
msgstr "調整分割區(_M)"

#: partIntfHelpers.py:249
msgid "Do _Not Format"
msgstr "不格式化(_N)"

#: partIntfHelpers.py:257
msgid "Error with Partitioning"
msgstr "磁碟分割錯誤"

#: partIntfHelpers.py:258
#, fuzzy, python-format
msgid ""
"The following critical errors exist with your requested partitioning scheme. "
"These errors must be corrected prior to continuing with your install of %"
"(productName)s.\n"
"\n"
"%(errorstr)s"
msgstr ""
"您的磁碟分割發生下列嚴重錯誤。這些錯誤必須在您繼續安裝 %s 前先更正。\n"
"\n"
"%s"

#: partIntfHelpers.py:274
msgid "Partitioning Warning"
msgstr "磁碟分割警告"

#: partIntfHelpers.py:275
#, python-format
msgid ""
"The following warnings exist with your requested partition scheme.\n"
"\n"
"%s\n"
"\n"
"Would you like to continue with your requested partitioning scheme?"
msgstr ""
"您的磁碟分割架構出現以下的警告訊息。\n"
"\n"
"%s\n"
"\n"
"您確定要繼續嗎？"

#: partIntfHelpers.py:289
msgid ""
"The following pre-existing partitions have been selected to be formatted, "
"destroying all data."
msgstr "下列已存在的分割區要被格式化，將會刪除所有資料。"

#: partIntfHelpers.py:292
msgid ""
"Select 'Yes' to continue and format these partitions, or 'No' to go back and "
"change these settings."
msgstr "選擇「是」以繼續格式化這些分割區，或「否」回到上一步並更改設定。"

#: partIntfHelpers.py:298
msgid "Format Warning"
msgstr "格式化警告"

#: partIntfHelpers.py:325
#, python-format
msgid ""
"You are about to delete the volume group \"%s\".\n"
"\n"
"ALL logical volumes in this volume group will be lost!"
msgstr ""
"您即將要刪除卷冊群組「%s」。\n"
"\n"
"在這個卷冊群組中的所有邏輯卷冊將會消失！"

#: partIntfHelpers.py:329
#, python-format
msgid "You are about to delete the logical volume \"%s\"."
msgstr "您即將要刪除邏輯卷冊「%s」。"

#: partIntfHelpers.py:332
msgid "You are about to delete a RAID device."
msgstr "您即將要刪除一個 RAID 裝置。"

#: partIntfHelpers.py:334
#, python-format
msgid "You are about to delete the %s partition."
msgstr "您即將要刪除 %s 分割區。"

#: partIntfHelpers.py:338
#, fuzzy, python-format
msgid "You are about to delete the %(type)s %(name)s"
msgstr "您即將要刪除 %s /%s"

#: partIntfHelpers.py:349
msgid "Confirm Reset"
msgstr "確認還原"

#: partIntfHelpers.py:350
msgid ""
"Are you sure you want to reset the partition table to its original state?"
msgstr "您確定要將磁碟分割表重設至原來的狀態？"

#: platform.py:98 platform.py:344 platform.py:412 platform.py:519
#: ui/create-storage.glade.h:17
msgid "RAID Device"
msgstr "RAID 裝置"

#: platform.py:99 platform.py:102 platform.py:345 platform.py:413
#: platform.py:520 platform.py:523
msgid "Master Boot Record (MBR)"
msgstr "主要開機紀錄（MBR）"

#: platform.py:101 platform.py:522
msgid "First sector of boot partition"
msgstr "開機分割區的第一個磁區"

#: platform.py:113
msgid "You have not created a bootable partition."
msgstr "您還未建立一個可用來開機的分割區。"

#: platform.py:118
msgid "Bootable partitions cannot be on a RAID device."
msgstr "可開機分割區不能建立在 RAID 裝置上。"

#: platform.py:120
msgid "Bootable partitions can only be on RAID1 devices."
msgstr "可開機分割區只能建立在 RAID 1 裝置上。"

#: platform.py:124
msgid "Bootable RAID1 set members must be partitions."
msgstr ""

#: platform.py:129
msgid "Bootable partitions cannot be on a logical volume."
msgstr "可開機分割區不能建立在邏輯卷冊上。"

#: platform.py:136
#, python-format
msgid "Bootable partitions cannot be on an %s filesystem."
msgstr "可開機分割區不能建立在一個 %s 檔案系統上。"

#: platform.py:140 platform.py:145
msgid "Bootable partitions cannot be on an encrypted block device"
msgstr "可開機分割區不能建立在一個加密的區塊裝置上。"

#: platform.py:217
msgid "EFI System Partition"
msgstr "EFI 系統分割區"

#: platform.py:229
msgid "You have not created a /boot/efi partition."
msgstr "您還未建立一個 /boot/efi 分割區。"

#: platform.py:235
msgid "/boot/efi is not EFI."
msgstr "/boot/efi 不是 EFI。"

#: platform.py:251
#, fuzzy, python-format
msgid "%s must have a %s disk label."
msgstr "%s 必須有個 bsd 磁碟標籤。"

#: platform.py:289
#, python-format
msgid "%s must have a bsd disk label."
msgstr "%s 必須有個 bsd 磁碟標籤。"

#: platform.py:301
#, python-format
msgid "The disk %s requires at least 1MB of free space at the beginning."
msgstr "磁碟 %s 在一開始時需要至少 1MB 的可用空間。"

#: platform.py:347
msgid "PPC PReP Boot"
msgstr "PPC PReP 開機"

#: platform.py:363
msgid "The boot partition must be within the first 4MB of the disk."
msgstr "boot 分割區必須在磁碟的前 4MB 中。"

#: platform.py:415 platform.py:418
msgid "Apple Bootstrap"
msgstr "Apple 啟動載入程式"

#: platform.py:432
#, python-format
msgid "%s must have a mac disk label."
msgstr "%s 必須有個 mac 磁碟標籤。"

#: rescue.py:215
msgid "When finished please exit from the shell and your system will reboot."
msgstr "完成後請退出 shell，您的系統將會重新啟動。"

#: rescue.py:229
msgid "Unable to find /bin/sh to execute!  Not starting shell"
msgstr "找不到可執行的 /bin/sh！Shell 沒有啟動"

#: rescue.py:248
msgid "Setup Networking"
msgstr "設定網路連線"

#: rescue.py:249
msgid "Do you want to start the network interfaces on this system?"
msgstr "您是否想要啟動這部系統上的網路介面卡？"

#: rescue.py:250 loader/driverdisk.c:666 loader/driverdisk.c:676
#: loader/hdinstall.c:203 textw/constants_text.py:56
msgid "Yes"
msgstr "是"

#: rescue.py:250 rescue.py:252 loader/driverdisk.c:666 loader/driverdisk.c:676
#: textw/constants_text.py:60
msgid "No"
msgstr "否"

#: rescue.py:257
msgid ""
"Unable to activate a networking device.  Networking will not be available in "
"rescue mode."
msgstr "無法啟用網路裝置。救援模式中將無法使用網路。"

#: rescue.py:292 rescue.py:361 rescue.py:372 rescue.py:457
msgid "Rescue"
msgstr "救援模式"

#: rescue.py:293
#, python-format
msgid ""
"The rescue environment will now attempt to find your Linux installation and "
"mount it under the directory %s.  You can then make any changes required to "
"your system.  If you want to proceed with this step choose 'Continue'.  You "
"can also choose to mount your file systems read-only instead of read-write "
"by choosing 'Read-Only'.\n"
"\n"
"If for some reason this process fails you can choose 'Skip' and this step "
"will be skipped and you will go directly to a command shell.\n"
"\n"
msgstr ""
"緊急救援環境會自動幫您找 Linux 安裝的地方並幫您掛載在 %s 目錄下。您可以視需求"
"做任何的變更。若您想要執行這個步驟，請選擇 「繼續」。您也可以選取「只能讀取」"
"來掛載您的檔案系統為只能讀取而不是可以讀寫。\n"
"\n"
"若有其他原因造成執行失敗，您可以選擇「跳過」，系統將會帶您進入命令列狀態。\n"
"\n"

#: rescue.py:303 iw/partition_gui.py:781 loader/cdinstall.c:206
#: loader/cdinstall.c:214 loader/driverdisk.c:627 storage/__init__.py:155
#: storage/devicetree.py:89
msgid "Continue"
msgstr "繼續"

#: rescue.py:303 rescue.py:308
msgid "Read-Only"
msgstr "只能讀取"

#: rescue.py:303 rescue.py:305 loader/cdinstall.c:248 loader/cdinstall.c:251
#: loader/method.c:324 storage/__init__.py:1791 textw/upgrade_text.py:139
msgid "Skip"
msgstr "跳過"

#: rescue.py:337
msgid "System to Rescue"
msgstr "要救援的系統"

#: rescue.py:338
msgid "Which device holds the root partition of your installation?"
msgstr "哪個裝置持有您的 root 分割區呢？"

#: rescue.py:340 rescue.py:344 text.py:626 text.py:628
msgid "Exit"
msgstr "離開"

#: rescue.py:362
msgid ""
"Your system had dirty file systems which you chose not to mount.  Press "
"return to get a shell from which you can fsck and mount your partitions.  "
"The system will reboot automatically when you exit from the shell."
msgstr ""
"您選擇不要掛載在系統的分割區有問題。按 return 鍵以取得 shell，您可以執行 "
"fsck 然後掛載分割區。當您退出 shell 後，系統將自動重新啟動。"

#: rescue.py:373
#, fuzzy, python-format
msgid ""
"Your system has been mounted under %(rootPath)s.\n"
"\n"
"Press <return> to get a shell. If you would like to make your system the "
"root environment, run the command:\n"
"\n"
"\tchroot %(rootPath)s\n"
"\n"
"The system will reboot automatically when you exit from the shell."
msgstr ""
"您的系統被掛載在 %s。\n"
"\n"
"請按 <return> 進入 shell。若您想使您的系統成為 root 環境，請執行下列指令：\n"
"\n"
"\tchroot %s\n"
"\n"
"當您離開 shell 時，系統將會自動重新啟動。"

#: rescue.py:458
#, python-format
msgid ""
"An error occurred trying to mount some or all of your system. Some of it may "
"be mounted under %s.\n"
"\n"
"Press <return> to get a shell. The system will reboot automatically when you "
"exit from the shell."
msgstr ""
"在掛載您的系統時發生錯誤。有些分割區可能已經掛載於 %s。\n"
"\n"
"請按 <return> 取得 shell。當您離開 shell 時，系統將會自動重新啟動。"

#: rescue.py:467
msgid "You don't have any Linux partitions.  Rebooting.\n"
msgstr "您沒有任何 Linux 分割區。系統即將重新啟動。\n"

#: rescue.py:470
msgid "Rescue Mode"
msgstr "救援模式"

#: rescue.py:471
msgid ""
"You don't have any Linux partitions. Press return to get a shell. The system "
"will reboot automatically when you exit from the shell."
msgstr ""
"您沒有任何的 Linux 分割區。按 return 鍵以取得 shell。當您退出 shell 後，系統"
"將自動重新啟動。"

#: rescue.py:484
#, python-format
msgid "Your system is mounted under the %s directory."
msgstr "您的系統被掛載在 %s 目錄下。"

#: text.py:154
msgid "Passphrase for encrypted device"
msgstr "已加密裝置的密碼"

#: text.py:167
msgid "Also add this passphrase to all existing encrypted devices"
msgstr "將這組密碼附加至所有現有的加密裝置"

#: text.py:198
#, fuzzy, python-format
msgid "The passphrase must be at least %d character long."
msgid_plural "The passphrase must be at least %d characters long."
msgstr[0] "密碼長度不得少於八個字元。"
msgstr[1] "密碼長度不得少於八個字元。"

#: text.py:232 ui/lukspassphrase.glade.h:6
msgid "Passphrase"
msgstr "密碼"

#: text.py:240 ui/lukspassphrase.glade.h:7
msgid "This is a global passphrase"
msgstr "這是組全域密碼"

#: text.py:355 text.py:359
msgid "Repository editing is not available in text mode."
msgstr "無法在文字模式下進行軟體庫的編輯。"

#: text.py:421
#, fuzzy, python-format
msgid "Welcome to %(productName)s for %(productArch)s"
msgstr "歡迎使用 %s 的 %s"

#: text.py:423
#, python-format
msgid "Welcome to %s"
msgstr "歡迎使用 %s"

#: text.py:425
msgid ""
"  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next "
"screen"
msgstr ""
"     <Tab>/<Alt-Tab>  移動游標          | <Space>  選取     | <F12>  下一個畫"
"面"

#: text.py:626 loader/net.c:110 loader/net.c:471 loader/net.c:526
#: loader/net.c:668 loader/net.c:676 loader/net.c:1097 loader/net.c:1105
msgid "Retry"
msgstr "重試"

#: text.py:652
msgid "Cancelled"
msgstr "已取消"

#: text.py:653
msgid "I can't go to the previous step from here. You will have to try again."
msgstr "現在無法回到上一層安裝步驟。您必須再試一次。"

#: upgrade.py:51
msgid "Proceed with upgrade?"
msgstr "確定要升級？"

#: upgrade.py:52
msgid ""
"The file systems of the Linux installation you have chosen to upgrade have "
"already been mounted. You cannot go back past this point. \n"
"\n"
msgstr ""
"您選擇要升級的檔案系統已經掛載了。過了這步安裝階段，將無法再來這裡。\n"
"\n"

#: upgrade.py:56
msgid "Would you like to continue with the upgrade?"
msgstr "您想要繼續升級系統嗎？"

#: upgrade.py:175
msgid "Mount failed"
msgstr "掛載失敗"

#: upgrade.py:176
#, python-format
msgid ""
"The following error occurred when mounting the file systems listed in /etc/"
"fstab.  Please fix this problem and try to upgrade again.\n"
"%s"
msgstr ""
"當掛載列在 /etc/fstab 中的檔案系統時發生了下列錯誤。請修正這個問題並嘗試再升"
"級一次。\n"
"%s"

#: upgrade.py:184 upgrade.py:191
msgid "Upgrade root not found"
msgstr "找不到升級的 root"

#: upgrade.py:185
msgid "The root for the previously installed system was not found."
msgstr "找不到先前安裝的系統的 root。"

#: upgrade.py:192
msgid ""
"The root for the previously installed system was not found.  You can exit "
"installer or backtrack to choose installation instead of upgrade."
msgstr ""
"找不到先前安裝的系統的 root。您可退出安裝程式或是退回並選擇安裝而不是升級。"

#: upgrade.py:215
msgid ""
"The following files are absolute symbolic links, which we do not support "
"during an upgrade. Please change them to relative symbolic links and restart "
"the upgrade.\n"
"\n"
msgstr ""
"下列檔案為絕對符號連結（absolute symbolic links），在升級時並不支援。請改成相"
"對符號連結（relative symbolic links）後再重新執行升級。\n"
"\n"

#: upgrade.py:221
msgid "Absolute Symlinks"
msgstr "絕對符號連結"

#: upgrade.py:232
msgid ""
"The following are directories which should instead be symbolic links, which "
"will cause problems with the upgrade.  Please return them to their original "
"state as symbolic links and restart the upgrade.\n"
"\n"
msgstr ""
"下列的目錄應該改為符號連結，如不是的話將會導致系統升級時發生問題，請將它們改"
"成原本的符號連結狀態後，再重新執行升級。\n"
"\n"

#: upgrade.py:238
msgid "Invalid Directories"
msgstr "目錄無效"

#: vnc.py:137
#, fuzzy, python-format
msgid "%(productName)s %(productVersion)s installation on host %(name)s"
msgstr "%s %s 安裝在主機 %s"

#: vnc.py:143
#, python-format
msgid "%(productName)s %(productVersion)s installation"
msgstr ""

#: vnc.py:172
#, python-format
msgid "Attempting to connect to vnc client on host %s..."
msgstr "試著要連線到主機 %s 的 vnc 用戶端..."

#: vnc.py:186
msgid "Connected!"
msgstr "已連線！"

#: vnc.py:189
msgid "Will try to connect again in 15 seconds..."
msgstr "將在 15 秒後試著再連線一次..."

#: vnc.py:195
#, python-format
msgid "Giving up attempting to connect after %d try!\n"
msgid_plural "Giving up attempting to connect after %d tries!\n"
msgstr[0] ""
msgstr[1] ""

#: vnc.py:206
#, python-format
msgid "Please manually connect your vnc client to %s to begin the install."
msgstr "請手動連接您的 vnc 用戶端至 %s 以開始進行安裝。"

#: vnc.py:208
msgid "Please manually connect your vnc client to begin the install."
msgstr "請手動連接您的 vnc 用戶端以開始進行安裝。"

#: vnc.py:211
msgid "Starting VNC..."
msgstr "VNC 啟動中..."

#: vnc.py:236
msgid "The VNC server is now running."
msgstr "VNC 伺服器現在正在執行。"

#: vnc.py:249
msgid ""
"\n"
"\n"
"You chose to connect to a listening vncviewer. \n"
"This does not require a password to be set.  If you \n"
"set a password, it will be used in case the connection \n"
"to the vncviewer is unsuccessful\n"
"\n"
msgstr ""
"\n"
"\n"
"您選擇連至一個監聽中的 vncviewer. \n"
"您無須設置密碼。若您 \n"
"設了一組密碼，這組密碼將會在連至 vncviewer 不成功 \n"
"情況下被使用\n"
"\n"

#: vnc.py:254
msgid ""
"\n"
"\n"
"WARNING!!! VNC server running with NO PASSWORD!\n"
"You can use the vncpassword=<password> boot option\n"
"if you would like to secure the server.\n"
"\n"
msgstr ""
"\n"
"\n"
"警告！！！VNC 伺服器正以無密碼的方式執行！\n"
"假如您想要保護伺服器的安全，您可以\n"
"使用 vncpassword=<password> 這個開機選項。\n"
"\n"

#: vnc.py:258
msgid ""
"\n"
"\n"
"You chose to execute vnc with a password. \n"
"\n"
msgstr ""
"\n"
"\n"
"您選擇了利用一組密碼來執行 vnc。\n"
"\n"

#: vnc.py:260
msgid ""
"\n"
"\n"
"Unknown Error.  Aborting. \n"
"\n"
msgstr ""
"\n"
"\n"
"不知名錯誤。進行終止。\n"
"\n"

#: vnc.py:282 vnc.py:375
msgid "VNC Configuration"
msgstr "VNC 設定"

#: vnc.py:285 vnc.py:379
msgid "No password"
msgstr "不設定密碼"

#: vnc.py:287 vnc.py:382
msgid ""
"A password will prevent unauthorized listeners connecting and monitoring "
"your installation progress.  Please enter a password to be used for the "
"installation"
msgstr ""
"密碼可以避免其他人連接到您的電腦，監控您的安裝過程。請為安裝過程輸入密碼"

#: vnc.py:295 vnc.py:390 textw/userauth_text.py:47
msgid "Password:"
msgstr "密碼："

#: vnc.py:296 vnc.py:391 textw/userauth_text.py:49
msgid "Password (confirm):"
msgstr "確認密碼："

#: vnc.py:314 vnc.py:413 textw/userauth_text.py:70
msgid "Password Mismatch"
msgstr "密碼不符"

#: vnc.py:315 vnc.py:414 textw/userauth_text.py:71
msgid "The passwords you entered were different. Please try again."
msgstr "您輸入的密碼不相符，請重新輸入。"

#: vnc.py:320 vnc.py:419 textw/userauth_text.py:66
msgid "Password Length"
msgstr "密碼長度"

#: vnc.py:321 vnc.py:420
msgid "The password must be at least six characters long."
msgstr "密碼長度不得少於六個字元。"

#: vnc.py:343
msgid "Unable to Start X"
msgstr "無法啟動 X"

#: vnc.py:345
msgid ""
"X was unable to start on your machine.  Would you like to start VNC to "
"connect to this computer from another computer and perform a graphical "
"install or continue with a text mode install?"
msgstr ""
"X 無法在您的機器上執行。您要啟動 VNC 使其他電腦可以連進來執行圖形模式安裝或是"
"使用文字模式繼續安裝？"

#: vnc.py:364
msgid "Start VNC"
msgstr "啟動 VNC"

#: vnc.py:365 vnc.py:367
msgid "Use text mode"
msgstr "使用文字模式安裝"

#: yuminstall.py:85
#, python-format
msgid "%s MB"
msgstr "%s MB"

#: yuminstall.py:88
#, python-format
msgid "%s KB"
msgstr "%s KB"

#: yuminstall.py:90
#, fuzzy, python-format
msgid "%s Byte"
msgid_plural "%s Bytes"
msgstr[0] "%s MB"
msgstr[1] "%s MB"

#: yuminstall.py:134
msgid "Preparing to install"
msgstr "正在準備進行安裝"

#: yuminstall.py:135
msgid "Preparing transaction from installation source"
msgstr "正在準備由安裝來源進行作業"

#: yuminstall.py:163
#, fuzzy, python-format
msgid "<b>Installing %(pkgStr)s</b> (%(size)s)\n"
msgstr "<b>正在安裝 %s</b>（%s）\n"

#: yuminstall.py:212
#, python-format
msgid "Packages completed: %(donepkgs)d of %(numpkgs)d"
msgid_plural "Packages completed: %(donepkgs)d of %(numpkgs)d"
msgstr[0] ""
msgstr[1] ""

#: yuminstall.py:227
msgid "Finishing upgrade"
msgstr "正在完成升級"

#: yuminstall.py:228
msgid "Finishing upgrade process.  This may take a little while."
msgstr "正在完成升級程序。這可能會花上一段時間。"

#: yuminstall.py:251
msgid "Error Installing Package"
msgstr "安裝套件時發生了錯誤"

#: yuminstall.py:252
#, python-format
msgid ""
"A fatal error occurred when installing the %s package.  This could indicate "
"errors when reading the installation media.  Installation cannot continue."
msgstr ""
"當安裝 %s 套件時發生了嚴重錯誤。這可能表示讀取安裝媒介時發生了問題。安裝程序"
"無法繼續進行。"

#: yuminstall.py:353 iw/task_gui.py:336
msgid "Error Setting Up Repository"
msgstr "設定軟體庫時發生錯誤"

#: yuminstall.py:354
#, fuzzy, python-format
msgid ""
"The following error occurred while setting up the installation repository:\n"
"\n"
"%(e)s\n"
"\n"
"Please provide the correct information for installing %(productName)s."
msgstr ""
"設定安裝軟體庫時發生了下列錯誤：\n"
"\n"
"%s\n"
"\n"
"請提供安裝 %s 的正確資訊。"

#: yuminstall.py:398
msgid "Change Disc"
msgstr "更換光碟"

#: yuminstall.py:399
#, fuzzy, python-format
msgid "Please insert %(productName)s disc %(discnum)d to continue."
msgstr "請插入 %s 光碟片 %d 以繼續。"

#: yuminstall.py:409
msgid "Wrong Disc"
msgstr "錯誤的光碟"

#: yuminstall.py:410
#, python-format
msgid "That's not the correct %s disc."
msgstr "這不是正確的 %s 光碟。"

#: yuminstall.py:417
msgid "Unable to access the disc."
msgstr "無法存取光碟。"

#: yuminstall.py:575
#, python-format
msgid "Repository %r is missing name in configuration, using id"
msgstr "軟體庫 %r 在設定中缺少名稱，使用 id"

#: yuminstall.py:699 yuminstall.py:1166 iw/task_gui.py:324
msgid ""
"Some of your software repositories require networking, but there was an "
"error enabling the network on your system."
msgstr "您的一些軟體庫需要網路作業，不過在您的系統上啟用網路時發生了一項錯誤。"

#: yuminstall.py:800 yuminstall.py:802
msgid "Re_boot"
msgstr "重新開機(_b)"

#: yuminstall.py:800
msgid "_Eject"
msgstr "退出光碟片(_E)"

#: yuminstall.py:806
#, python-format
msgid ""
"The file %s cannot be opened.  This is due to a missing file, a corrupt "
"package or corrupt media.  Please verify your installation source.\n"
"\n"
"If you exit, your system will be left in an inconsistent state that will "
"likely require reinstallation.\n"
"\n"
msgstr ""
"無法開啟 %s 檔案。這是因為檔案遺失、套件毀損，或是媒介損毀。請驗證您的安裝來"
"源。\n"
"\n"
"如果您重新開機的話，您的系統將會處於不一致的狀態，並且可能會需要重新安裝。\n"
"\n"

#: yuminstall.py:854
msgid "Retrying"
msgstr "正在重試"

#: yuminstall.py:854
msgid "Retrying download."
msgstr "正在重新嘗試下載。"

#: yuminstall.py:919
#, python-format
msgid ""
"There was an error running your transaction for the following reason: %s\n"
msgstr "由於下列原因，您的傳輸發生了錯誤：%s\n"

#: yuminstall.py:962 yuminstall.py:963
msgid "file conflicts"
msgstr "檔案衝突"

#: yuminstall.py:964
msgid "older package(s)"
msgstr "舊的套件"

#: yuminstall.py:965
msgid "insufficient disk space"
msgstr "磁碟空間不足"

#: yuminstall.py:966
msgid "insufficient disk inodes"
msgstr "磁碟 inode 不足"

#: yuminstall.py:967
msgid "package conflicts"
msgstr "套件衝突"

#: yuminstall.py:968
msgid "package already installed"
msgstr "已安裝套件"

#: yuminstall.py:969
msgid "required package"
msgstr "所需套件"

#: yuminstall.py:970
msgid "package for incorrect arch"
msgstr "套件的架構不正確"

#: yuminstall.py:971
msgid "package for incorrect os"
msgstr "套件的作業系統不正確"

#: yuminstall.py:985
msgid "You need more space on the following file systems:\n"
msgstr "以下檔案系統需要更多空間：\n"

#: yuminstall.py:998
#, python-format
msgid ""
"There were file conflicts when checking the packages to be installed:\n"
"%s\n"
msgstr ""
"當檢查您想安裝的套件時發現了檔案衝突：\n"
"%s\n"

#: yuminstall.py:1001
#, python-format
msgid ""
"There was an error running your transaction for the following reason(s): %"
"s.\n"
msgstr "由於下列原因，您的傳輸發生了錯誤：%s。\n"

#: yuminstall.py:1008 yuminstall.py:1013
msgid "Error Running Transaction"
msgstr "執行傳輸時發生錯誤"

#: yuminstall.py:1203
msgid ""
"Unable to read group information from repositories.  This is a problem with "
"the generation of your install tree."
msgstr "無法由軟體庫讀取群組讀取群組資訊。這是個您安裝樹在產生上所發生的問題。"

#: yuminstall.py:1239
msgid "Retrieving installation information."
msgstr "正在取得安裝資訊。"

#: yuminstall.py:1241
#, python-format
msgid "Retrieving installation information for %s."
msgstr "正在為 %s 取得安裝資訊。"

#: yuminstall.py:1243
msgid "Installation Progress"
msgstr "安裝進度"

#: yuminstall.py:1251 textw/constants_text.py:64
msgid "Edit"
msgstr "修改"

#: yuminstall.py:1262 yuminstall.py:1451
#, python-format
msgid ""
"Unable to read package metadata. This may be due to a missing repodata "
"directory.  Please ensure that your install tree has been correctly "
"generated.\n"
"\n"
"%s"
msgstr ""
"無法讀取套件的元資料（metadata）。可能是因為缺少了軟體庫的目錄。請確定您的安"
"裝樹已正確產生。\n"
"\n"
"%s"

#: yuminstall.py:1430
msgid ""
"Some of the packages you have selected for install are missing "
"dependencies.  You can exit the installation, go back and change your "
"package selections, or continue installing these packages without their "
"dependencies."
msgstr ""

#: yuminstall.py:1473
#, python-format
msgid ""
"Your selected packages require %d MB of free space for installation, but you "
"do not have enough available.  You can change your selections or exit the "
"installer."
msgstr ""
"您所選擇安裝的套件需要 %d MB 的磁碟空間；但電腦上沒有足夠的空間。您可以變更選"
"擇，或退出安裝程式。"

#: yuminstall.py:1494
msgid "Reboot?"
msgstr "重新開機？"

#: yuminstall.py:1495
msgid "The system will be rebooted now."
msgstr "系統現在將重新開機。"

#: yuminstall.py:1636
#, python-format
msgid ""
"You appear to be upgrading from a system which is too old to upgrade to this "
"version of %s.  Are you sure you wish to continue the upgrade process?"
msgstr "您正打算從太舊而不適合升級的系統，升級到 %s。您確定要繼續升級程序嗎？"

#: yuminstall.py:1671
#, fuzzy, python-format
msgid ""
"The arch of the release of %(productName)s you are upgrading to appears to "
"be %(myarch)s which does not match your previously installed arch of %(arch)"
"s.  This is likely to not succeed.  Are you sure you wish to continue the "
"upgrade process?"
msgstr ""
"您正打算從先前安裝的 %s 架構升級至 %s 版本的架構（%s），不過這和您先前所安裝"
"的架構並不相符。這很可能無法成功。您確定要繼續進行升級程序嗎？"

#: yuminstall.py:1718
msgid "Post Upgrade"
msgstr "升級後"

#: yuminstall.py:1719
msgid "Performing post-upgrade configuration"
msgstr "正在執行升級後的設定"

#: yuminstall.py:1721
msgid "Post Installation"
msgstr "安裝後的階段"

#: yuminstall.py:1722
msgid "Performing post-installation configuration"
msgstr "正在執行安裝後的階段的設定"

#: yuminstall.py:1943
msgid "Installation Starting"
msgstr "安裝即將開始"

#: yuminstall.py:1944
msgid "Starting installation process"
msgstr "正在進行安裝程序"

#: yuminstall.py:1982
msgid "Dependency Check"
msgstr "套件相依性檢查"

#: yuminstall.py:1983
msgid "Checking dependencies in packages selected for installation"
msgstr "正在檢查欲安裝套件的相依性。"

#: installclasses/fedora.py:39
msgid "_Fedora"
msgstr "_Fedora(_F)"

#: installclasses/fedora.py:40
#, fuzzy, python-format
msgid ""
"The default installation of %s includes a set of software applicable for "
"general internet usage. You can optionally select a different set of "
"software now."
msgstr ""
"%s 的預設安裝包括使用網際網路的一般性軟體。您希望系統還支援哪些東西呢？"

#: installclasses/fedora.py:49
msgid "Graphical Desktop"
msgstr ""

#: installclasses/fedora.py:54 installclasses/rhel.py:61
msgid "Software Development"
msgstr "軟體開發"

#: installclasses/fedora.py:60 installclasses/rhel.py:71
msgid "Web Server"
msgstr "網頁伺服器"

#: installclasses/fedora.py:64 installclasses/rhel.py:51
msgid "Minimal"
msgstr ""

#: installclasses/rhel.py:40
msgid "Red Hat Enterprise Linux"
msgstr "Red Hat Enterprise Linux"

#: installclasses/rhel.py:41
#, python-format
msgid ""
"The default installation of %s is a minimal install. You can optionally "
"select a different set of software now."
msgstr ""

#: installclasses/rhel.py:52
msgid "Desktop"
msgstr ""

#: installclasses/rhel.py:78
#, fuzzy
msgid "Advanced Server"
msgstr "名稱伺服器："

#: iw/GroupSelector.py:147
#, python-format
msgid "Packages in %s"
msgstr "%s 中的套件"

#: iw/GroupSelector.py:424
#, fuzzy, python-format
msgid "Optional packages selected: %(inst)d of %(cnt)d"
msgstr "選擇了可選套件：%d 之 %d"

#: iw/GroupSelector.py:426
#, python-format
msgid "<i>%s</i>"
msgstr "<i>%s</i>"

#: iw/GroupSelector.py:486
msgid "Uncategorized"
msgstr "未分類"

#: iw/account_gui.py:52
msgid "Root _Password:"
msgstr "Root 密碼(_P)："

#: iw/account_gui.py:54
msgid "_Confirm:"
msgstr "密碼確認(_C)："

#: iw/account_gui.py:92
msgid "Caps Lock is on."
msgstr "Caps Lock 啟用中。"

#: iw/account_gui.py:102 iw/account_gui.py:110 iw/account_gui.py:117
#: iw/account_gui.py:138 textw/userauth_text.py:74
msgid "Error with Password"
msgstr "密碼發生錯誤"

#: iw/account_gui.py:103
msgid ""
"You must enter your root password and confirm it by typing it a second time "
"to continue."
msgstr "您必須輸入您的 root 密碼，並再輸入一次以作確認，才能繼續安裝過程。"

#: iw/account_gui.py:111
msgid "The passwords you entered were different.  Please try again."
msgstr "您輸入的密碼不相符，請重新輸入。"

#: iw/account_gui.py:118
msgid "The root password must be at least six characters long."
msgstr "root 密碼不得少於六個字元。"

#: iw/account_gui.py:127 textw/userauth_text.py:83
msgid "Weak Password"
msgstr "安全性較弱的密碼"

#: iw/account_gui.py:128
#, python-format
msgid "You have provided a weak password: %s"
msgstr "您所提供的密碼安全性過低：%s"

#: iw/account_gui.py:131
msgid "Use Anyway"
msgstr "照樣使用"

#: iw/account_gui.py:139 textw/userauth_text.py:75
msgid ""
"Requested password contains non-ASCII characters, which are not allowed."
msgstr "所要求的密碼含有非 ASCII 的字元，這些字元不允許使用在密碼上。"

#: iw/advanced_storage.py:91
#, fuzzy
msgid "You must select a NIC to use."
msgstr "您必須選擇欲編輯的裝置"

#: iw/advanced_storage.py:138
msgid "Invalid Initiator Name"
msgstr "Initiator 名稱無效"

#: iw/advanced_storage.py:139
msgid "You must provide an initiator name."
msgstr "您必須提供一個 Initiator 名稱。"

#: iw/advanced_storage.py:168
msgid "Error with Data"
msgstr "資料錯誤"

#: iw/autopart_type.py:97
msgid ""
"No partitions are available to resize.  Only physical partitions with "
"specific filesystems can be resized."
msgstr "沒有可變更大小的分割區。只有含有特定檔案系統的實體分割區可改變大小。"

#: iw/autopart_type.py:120
msgid "Resize FileSystem Error"
msgstr "重設檔案系統大小時發生了錯誤"

#: iw/autopart_type.py:121
#, python-format
msgid "%(device)s: %(msg)s"
msgstr ""

#: iw/autopart_type.py:130
msgid "Resize Device Error"
msgstr "重設裝置大小時發生了錯誤"

#: iw/autopart_type.py:131
#, python-format
msgid "%(name)s: %(msg)s"
msgstr ""

#: iw/autopart_type.py:228
#, fuzzy
msgid "Use All Space"
msgstr "已用空間："

#: iw/autopart_type.py:230
msgid ""
"Removes all partitions on the selected device(s).  This includes partitions "
"created by other operating systems.\n"
"\n"
"<b>Tip:</b> This option will remove data from the selected device(s).  Make "
"sure you have backups."
msgstr ""

#: iw/autopart_type.py:236
#, fuzzy
msgid "Replace Existing Linux System(s)"
msgstr "替換掉現有的 Linux 系統"

#: iw/autopart_type.py:238
msgid ""
"Removes all Linux partitions on the selected device(s). This does not remove "
"other partitions you may have on your storage device(s) (such as VFAT or "
"FAT32).\n"
"\n"
"<b>Tip:</b> This option will remove data from the selected device(s).  Make "
"sure you have backups."
msgstr ""

#: iw/autopart_type.py:246
#, fuzzy
msgid "Shrink Current System"
msgstr "縮小目前的系統"

#: iw/autopart_type.py:248
msgid ""
"Shrinks existing partitions to create free space for the default layout."
msgstr ""

#: iw/autopart_type.py:250
#, fuzzy
msgid "Use Free Space"
msgstr "使用可用空間"

#: iw/autopart_type.py:252
msgid ""
"Retains your current data and partitions and uses only the unpartitioned "
"space on the selected device(s), assuming you have enough free space "
"available."
msgstr ""

#: iw/autopart_type.py:256
#, fuzzy
msgid "Create Custom Layout"
msgstr "建立自訂的分割模式"

#: iw/autopart_type.py:258
msgid ""
"Manually create your own custom layout on the selected device(s) using our "
"partitioning tool."
msgstr ""

#: iw/blpasswidget.py:44
msgid "_Use a boot loader password"
msgstr "使用開機載入程式密碼(_U)"

#: iw/blpasswidget.py:45
msgid ""
"A boot loader password prevents users from changing kernel options, "
"increasing security."
msgstr "開機載入程式密碼可以防止使用者更改核心選項，並增強安全性。"

#: iw/blpasswidget.py:76
msgid "Change _password"
msgstr "更改密碼(_p)"

#: iw/blpasswidget.py:99
msgid "Enter Boot Loader Password"
msgstr "輸入開機管理程式密碼"

#: iw/blpasswidget.py:105
msgid ""
"Enter a boot loader password and then confirm it.  (Note that your BIOS "
"keymap may be different than the actual keymap you are used to.)"
msgstr ""
"請輸入開機管理程式的密碼，然後再輸入一次以作確認。（請注意您的 BIOS 鍵盤配置 "
"也許與您平時使用的實際鍵盤配置不一樣。）"

#: iw/blpasswidget.py:112
msgid "_Password:"
msgstr "密碼(_P)："

#: iw/blpasswidget.py:118
msgid "Con_firm:"
msgstr "密碼確認(_f)："

#: iw/blpasswidget.py:139
msgid "Passwords don't match"
msgstr "密碼不符"

#: iw/blpasswidget.py:140
msgid "Passwords do not match"
msgstr "密碼不符"

#: iw/blpasswidget.py:149
msgid ""
"Your boot loader password is shorter than six characters.  We recommend a "
"longer boot loader password.\n"
"\n"
"Would you like to continue with this password?"
msgstr ""
"您的開機載入程式密碼少於 6 個字元。建議您使用長一點的密碼。\n"
"\n"
"您想要繼續使用這組密碼嗎？"

#: iw/bootloader_main_gui.py:36
msgid "Boot Loader Configuration"
msgstr "開機管理程式設定"

#: iw/bootloader_main_gui.py:180 iw/bootloader_main_gui.py:185
#: iw/bootloader_main_gui.py:223
#, python-format
msgid "_Install boot loader on /dev/%s."
msgstr "在 /dev/%s 上安裝開機載入程式(_I)。"

#: iw/bootloader_main_gui.py:229
msgid "_Change device"
msgstr "改變裝置(_C)"

#: iw/cleardisks_gui.py:33
msgid "Clear Disks Selector"
msgstr ""

#: iw/cleardisks_gui.py:44 iw/filter_gui.py:409
#, fuzzy
msgid "You must select at least one drive to be used for installation."
msgstr "您至少需選擇一部硬碟以便安裝 %s。"

#: iw/cleardisks_gui.py:54
#, fuzzy
msgid "You must select one drive to boot from."
msgstr "您必須選擇欲編輯的裝置"

#: iw/cleardisks_gui.py:126 iw/cleardisks_gui.py:145 iw/filter_gui.py:444
#: iw/filter_gui.py:455 iw/filter_gui.py:485
msgid "Model"
msgstr ""

#: iw/cleardisks_gui.py:127 iw/cleardisks_gui.py:146 iw/filter_gui.py:445
#: iw/filter_gui.py:456 iw/filter_gui.py:464 iw/filter_gui.py:475
#: iw/filter_gui.py:486
msgid "Capacity"
msgstr ""

#: iw/cleardisks_gui.py:128 iw/filter_gui.py:446 iw/filter_gui.py:465
#: iw/filter_gui.py:476 iw/filter_gui.py:487
#, fuzzy
msgid "Vendor"
msgstr "_Fedora(_F)"

#: iw/cleardisks_gui.py:129 iw/filter_gui.py:447 iw/filter_gui.py:466
#: iw/filter_gui.py:477 iw/filter_gui.py:488
msgid "Interconnect"
msgstr ""

#: iw/cleardisks_gui.py:130 iw/filter_gui.py:448 iw/filter_gui.py:478
#: iw/filter_gui.py:489
msgid "Serial Number"
msgstr ""

#: iw/cleardisks_gui.py:144
#, fuzzy
msgid "Boot"
msgstr "/boot"

#: iw/cleardisks_gui.py:181
msgid ""
"<b>Tip:</b> All Linux filesystems on install target devices will be "
"reformatted and wiped of any data.  Make sure you have backups."
msgstr ""

#: iw/cleardisks_gui.py:183 ui/cleardisks.glade.h:3
msgid ""
"<b>Tip:</b> Install target devices will be reformatted and wiped of any "
"data.  Make sure you have backups."
msgstr ""

#: iw/cleardisks_gui.py:185
msgid ""
"<b>Tip:</b> Your filesystems on install target devices will not be wiped "
"unless you choose to do so during customization."
msgstr ""

#: iw/congrats_gui.py:33
msgid "Congratulations"
msgstr "恭喜您"

#: iw/congrats_gui.py:74 textw/complete_text.py:39
#, python-format
msgid ""
"Congratulations, your %s installation is complete.\n"
"\n"
msgstr ""
"恭喜您，您的 %s 安裝已完成。\n"
"\n"

#: iw/congrats_gui.py:77 textw/complete_text.py:42
msgid "Shutdown"
msgstr "關閉"

#: iw/congrats_gui.py:79 textw/complete_text.py:44
msgid "Please shutdown to use the installed system.\n"
msgstr "請進行關閉以使用已安裝的系統。\n"

#: iw/congrats_gui.py:81 textw/complete_text.py:46
msgid "Please reboot to use the installed system.\n"
msgstr "請重新啟動系統來使用已安裝的系統。\n"

#: iw/congrats_gui.py:86 textw/complete_text.py:51
msgid ""
"Note that updates may be available to ensure the proper functioning of your "
"system and installation of these updates is recommended after the reboot."
msgstr ""
"請注意，可能會有可用的更新以確保您的系統可正常運作，我們建議您在重新啟動系統"
"後安裝這些更新。"

#: iw/congrats_gui.py:90 textw/complete_text.py:55
#, python-format
msgid ""
"Congratulations, your %s installation is complete.\n"
"\n"
"Please reboot to use the installed system.  Note that updates may be "
"available to ensure the proper functioning of your system and installation "
"of these updates is recommended after the reboot."
msgstr ""
"恭喜您，您的 %s 的安裝程序已完成。\n"
"\n"
"請重新啟動系統以使用安裝的系統。請注意，可能會有可用的更新以確保您的系統可正"
"常運作，我們建議您在重新啟動系統後安裝這些更新。"

#: iw/examine_gui.py:39
msgid "Upgrade Examine"
msgstr "升級檢視"

#: iw/examine_gui.py:60
#, fuzzy
msgid "Fresh Installation"
msgstr "安裝前的階段"

#: iw/examine_gui.py:62
#, fuzzy, python-format
msgid ""
"Choose this option to install a fresh copy of %s on your system.  Existing "
"software and data may be overwritten depending on your configuration choices."
msgstr ""
"選擇這個選項以完整安裝您的系統，取決於您的設定選項，目前的軟體與資料也許會被"
"覆寫。"

#: iw/examine_gui.py:67
#, fuzzy
msgid "Upgrade an Existing Installation"
msgstr "升級現有系統(_U)"

#: iw/examine_gui.py:69
#, fuzzy, python-format
msgid ""
"Choose this option if you would like to upgrade your existing %s system.  "
"This option will preserve the existing data on your storage device(s)."
msgstr ""
"假如您想要升級您目前的 %s 系統，請選擇這個選項。此選項將會保留您硬碟上現有的"
"資料。"

#: iw/examine_gui.py:109
#, fuzzy
msgid ""
"At least one existing installation has been detected on your system.  What "
"would you like to do?"
msgstr "並沒有為您的系統載入任何的裝置驅動程式，您想要現在載入嗎？"

#: iw/examine_gui.py:128
#, fuzzy, python-format
msgid "<b>Which %s installation would you like to upgrade?</b>"
msgstr "您想要怎麼做？"

#: iw/examine_gui.py:142
msgid "Unknown Linux system"
msgstr "不知名 Linux 系統"

#: iw/filter_gui.py:147
#, python-format
msgid "<b>%s device(s) (%s MB) selected</b> out of %s device(s) (%s MB) total."
msgstr ""

#: iw/filter_gui.py:397
#, fuzzy
msgid "Device Filter"
msgstr "裝置設定失敗"

#: iw/filter_gui.py:449 iw/filter_gui.py:457 iw/filter_gui.py:468
#: iw/filter_gui.py:479 iw/filter_gui.py:494 iw/osbootwidget.py:66
#: iw/partition_gui.py:607
msgid "Device"
msgstr "裝置"

#: iw/filter_gui.py:463 iw/filter_gui.py:474 iw/filter_gui.py:490
#, fuzzy
msgid "Identifier"
msgstr "辨識"

#: iw/filter_gui.py:467
#, fuzzy
msgid "Paths"
msgstr "路徑(_P)"

#: iw/filter_gui.py:491
#, fuzzy
msgid "Port"
msgstr "放棄(_A)"

#: iw/filter_gui.py:492
#, fuzzy
msgid "Target"
msgstr "測試"

#: iw/filter_gui.py:493
msgid "LUN"
msgstr ""

#: iw/filter_type.py:55
#, fuzzy
msgid "What type of devices will your installation involve?"
msgstr "包含著安裝映像檔的是哪一類型的媒介？"

#: iw/filter_type.py:61
#, fuzzy
msgid "Basic Storage Devices"
msgstr "正在尋找儲存裝置"

#: iw/filter_type.py:62
msgid ""
"Installs or upgrades to typical types of storage devices.  If you're not "
"sure which option is right for you, this is probably it."
msgstr ""

#: iw/filter_type.py:66
#, fuzzy
msgid "Specialized Storage Devices"
msgstr "正在尋找儲存裝置"

#: iw/filter_type.py:67
msgid ""
"Installs or upgrades to devices such as Storage Area Networks (SANs) or "
"mainframe attached disks (DASD), usually in an enterprise environment"
msgstr ""

#: iw/language_gui.py:33 textw/language_text.py:45
msgid "Language Selection"
msgstr "選擇語言"

#: iw/language_gui.py:81 loader/lang.c:370 textw/language_text.py:46
msgid "What language would you like to use during the installation process?"
msgstr "在安裝的過程中你想使用哪種語言？"

#: iw/lvm_dialog_gui.py:125 iw/lvm_dialog_gui.py:171 iw/lvm_dialog_gui.py:185
#: iw/lvm_dialog_gui.py:224 iw/lvm_dialog_gui.py:301 iw/lvm_dialog_gui.py:690
#: iw/lvm_dialog_gui.py:711
msgid "Not enough space"
msgstr "空間不足"

#: iw/lvm_dialog_gui.py:126
msgid ""
"The physical extent size cannot be changed because otherwise the space "
"required by the currently defined logical volumes will be increased to more "
"than the available space."
msgstr ""
"無法更改實體容量的大小，因為目前定義的邏輯卷冊所需的空間將會增大至超過可使用"
"的空間。"

#: iw/lvm_dialog_gui.py:135
msgid "Confirm Physical Extent Change"
msgstr "確認變更實體容量"

#: iw/lvm_dialog_gui.py:136
msgid ""
"This change in the value of the physical extent will require the sizes of "
"the current logical volume requests to be rounded up in size to an integer "
"multiple of the physical extent.\n"
"\n"
"This change will take effect immediately."
msgstr ""
"這個實體容量數值的變更將需要目前的邏輯卷冊大小調整為一個整數乘以實體容量的大"
"小。\n"
"\n"
"這個變更會立即生效。"

#: iw/lvm_dialog_gui.py:145 iw/lvm_dialog_gui.py:207
msgid "C_ontinue"
msgstr "繼續(_o)"

#: iw/lvm_dialog_gui.py:172
#, fuzzy, python-format
msgid ""
"The physical extent size cannot be changed because the value selected (%"
"(curpe)10.2f MB) is larger than the smallest physical volume (%(maxpvsize)"
"10.2f MB) in the volume group."
msgstr ""
"無法變更實體容量的大小，因為選取的數值（%10.2f MB）大於卷冊群組中最小的實體磁"
"區（%10.2f MB）。"

#: iw/lvm_dialog_gui.py:186
#, fuzzy, python-format
msgid ""
"The physical extent size cannot be changed because the value selected (%"
"(curpe)10.2f MB) is too large compared to the size of the smallest physical "
"volume (%(maxpvsize)10.2f MB) in the volume group."
msgstr ""
"無法變更實體容量的大小，因為選取的數值（%10.2f MB）大於卷冊群組中最小的實體磁"
"區（%10.2f MB）。"

#: iw/lvm_dialog_gui.py:200
msgid "Too small"
msgstr "太小"

#: iw/lvm_dialog_gui.py:201
msgid ""
"This change in the value of the physical extent will waste substantial space "
"on one or more of the physical volumes in the volume group."
msgstr ""
"這個實體容量數值的變更將會浪費在卷冊群組中一或更多的實體卷冊上相當大的空間。"

#: iw/lvm_dialog_gui.py:225
#, python-format
msgid ""
"The physical extent size cannot be changed because the resulting maximum "
"logical volume size (%10.2f MB) is smaller than one or more of the currently "
"defined logical volumes."
msgstr ""
"無法變更實體容量的大小，因為結果最大的邏輯卷冊大小（%10.2f MB）小於一或多個目"
"前已定義的邏輯卷冊。"

#: iw/lvm_dialog_gui.py:302
msgid ""
"You cannot remove this physical volume because otherwise the volume group "
"will be too small to hold the currently defined logical volumes."
msgstr ""
"您不能移除這個實體卷冊，因為這樣會導致卷冊群組將會太小而無法容納目前已定義的"
"邏輯卷冊。"

#: iw/lvm_dialog_gui.py:401
msgid "Make Logical Volume"
msgstr "建立邏輯卷冊"

#: iw/lvm_dialog_gui.py:403
#, python-format
msgid "Edit Logical Volume: %s"
msgstr "編輯邏輯卷冊：%s"

#: iw/lvm_dialog_gui.py:442 iw/raid_dialog_gui.py:443
msgid "_File System Type:"
msgstr "檔案系統類型(_F)："

#: iw/lvm_dialog_gui.py:448
msgid "_Logical Volume Name:"
msgstr "邏輯卷冊名稱(_L)："

#: iw/lvm_dialog_gui.py:457 iw/partition_dialog_gui.py:469
msgid "_Size (MB):"
msgstr "大小（MB）(_S)："

#: iw/lvm_dialog_gui.py:464
#, python-format
msgid "(Max size is %s MB)"
msgstr "（最大空間為 %s MB）"

#: iw/lvm_dialog_gui.py:469 iw/partition_dialog_gui.py:521
#: iw/partition_ui_helpers_gui.py:331 iw/raid_dialog_gui.py:415
msgid "_Encrypt"
msgstr "加密(_E)"

#: iw/lvm_dialog_gui.py:478 iw/partition_dialog_gui.py:451
#: iw/raid_dialog_gui.py:453
msgid "Original File System Type:"
msgstr "原本的檔案系統類型："

#: iw/lvm_dialog_gui.py:483 iw/partition_dialog_gui.py:459
#: iw/raid_dialog_gui.py:460
msgid "Original File System Label:"
msgstr "原本的檔案系統標籤："

#: iw/lvm_dialog_gui.py:488
msgid "Logical Volume Name:"
msgstr "邏輯卷冊名稱："

#: iw/lvm_dialog_gui.py:492
msgid "Size (MB):"
msgstr "大小（MB）："

#: iw/lvm_dialog_gui.py:519 iw/partition_dialog_gui.py:407
#: iw/raid_dialog_gui.py:434
msgid "_Mount Point:"
msgstr "檔案系統掛載點(_M)："

#: iw/lvm_dialog_gui.py:596 iw/partition_dialog_gui.py:113
#: iw/partition_ui_helpers_gui.py:109 iw/partition_ui_helpers_gui.py:131
#: iw/partition_ui_helpers_gui.py:133 iw/raid_dialog_gui.py:169
msgid "<Not Applicable>"
msgstr "「不適用」"

#: iw/lvm_dialog_gui.py:604
msgid "Illegal Logical Volume Name"
msgstr "無效的邏輯卷冊名稱"

#: iw/lvm_dialog_gui.py:619
msgid "Illegal logical volume name"
msgstr "無效的邏輯卷冊名稱"

#: iw/lvm_dialog_gui.py:620
#, python-format
msgid "The logical volume name \"%s\" is already in use. Please pick another."
msgstr "邏輯卷冊名稱「%s」已被使用。請選擇另外一個。"

#: iw/lvm_dialog_gui.py:661 iw/partition_dialog_gui.py:127
#: iw/raid_dialog_gui.py:183
msgid "Mount point in use"
msgstr "掛載點已被使用"

#: iw/lvm_dialog_gui.py:662 iw/partition_dialog_gui.py:128
#: iw/raid_dialog_gui.py:184
#, python-format
msgid "The mount point \"%s\" is in use. Please pick another."
msgstr "您所要求的掛載點「%s」已經被使用。請另外指定一個。"

#: iw/lvm_dialog_gui.py:677
msgid "Illegal size"
msgstr "無效的大小"

#: iw/lvm_dialog_gui.py:678
msgid "The requested size as entered is not a valid number greater than 0."
msgstr "您必須輸入一個有效的、大於零的數字。"

#: iw/lvm_dialog_gui.py:691
#, fuzzy, python-format
msgid ""
"The current requested size (%(size)10.2f MB) is larger than the maximum "
"logical volume size (%(maxlv)10.2f MB). To increase this limit you can "
"create more Physical Volumes from unpartitioned disk space and add them to "
"this Volume Group."
msgstr ""
"目前要求的大小（%10.2f MB）大於邏輯卷冊大小的最大值（%10.2f MB）。如要增加這"
"個容量限制，您可以從未分割的分割區中，建立更多實體卷冊，然後將這些卷冊加入卷"
"冊群組中。"

#: iw/lvm_dialog_gui.py:712
#, fuzzy, python-format
msgid ""
"The logical volumes you have configured require %(size)d MB, but the volume "
"group only has %(tempvgsize)d MB.  Please either make the volume group "
"larger or make the logical volume(s) smaller."
msgstr ""
"您所設定的邏輯卷測需要 %d MB，不過卷測群組只有 %d MB。請擴大卷測群組或是將邏"
"輯卷測縮小。"

#: iw/lvm_dialog_gui.py:814
msgid "No free slots"
msgstr "沒有可用的位置"

#: iw/lvm_dialog_gui.py:815
#, python-format
msgid "You cannot create more than %d logical volume per volume group."
msgid_plural "You cannot create more than %d logical volumes per volume group."
msgstr[0] ""
msgstr[1] ""

#: iw/lvm_dialog_gui.py:825
msgid "No free space"
msgstr "沒有剩餘空間"

#: iw/lvm_dialog_gui.py:826
msgid ""
"There is no room left in the volume group to create new logical volumes. To "
"add a logical volume you must reduce the size of one or more of the "
"currently existing logical volumes"
msgstr ""
"這個卷冊群組已經沒有剩餘的空間來建立邏輯卷冊。如要新增一個邏輯卷冊，您必須要"
"縮小一或多個目前現有的邏輯卷冊空間"

#: iw/lvm_dialog_gui.py:863
#, python-format
msgid "Are you sure you want to delete the logical volume \"%s\"?"
msgstr "您確定要刪除邏輯卷冊「%s」嗎？"

#: iw/lvm_dialog_gui.py:969
msgid "Invalid Volume Group Name"
msgstr "無效的卷冊群組名稱"

#: iw/lvm_dialog_gui.py:978
msgid "Name in use"
msgstr "名稱已被使用"

#: iw/lvm_dialog_gui.py:979
#, python-format
msgid "The volume group name \"%s\" is already in use. Please pick another."
msgstr "您所輸入的卷冊群組名稱「%s」已被使用。請另外指定一個。"

#: iw/lvm_dialog_gui.py:1265
msgid "Not enough physical volumes"
msgstr "實體卷冊不足"

#: iw/lvm_dialog_gui.py:1266
msgid ""
"At least one unused physical volume partition is needed to create an LVM "
"Volume Group.\n"
"\n"
"Create a partition or RAID array of type \"physical volume (LVM)\" and then "
"select the \"LVM\" option again."
msgstr ""
"需要至少一個未使用的實體卷冊分割區，以用來建立一個 LVM 卷冊群組。\n"
"\n"
"首先，建立一個分割區或「實體卷冊（LVM）」類型的 RAID 陣列，然後再選擇「LVM」"
"選項。"

#: iw/lvm_dialog_gui.py:1277
msgid "Make LVM Volume Group"
msgstr "建立 LVM 卷冊群組"

#: iw/lvm_dialog_gui.py:1280
#, python-format
msgid "Edit LVM Volume Group: %s"
msgstr "編輯 LVM 卷冊群組：%s"

#: iw/lvm_dialog_gui.py:1282
msgid "Edit LVM Volume Group"
msgstr "編輯 LVM 卷冊群組"

#: iw/lvm_dialog_gui.py:1298
msgid "_Volume Group Name:"
msgstr "卷冊群組名稱(_V)："

#: iw/lvm_dialog_gui.py:1306
msgid "Volume Group Name:"
msgstr "卷冊群組名稱："

#: iw/lvm_dialog_gui.py:1314
msgid "_Physical Extent:"
msgstr "實體容量(_P)："

#: iw/lvm_dialog_gui.py:1329
msgid "Physical Volumes to _Use:"
msgstr "要使用的實體卷冊(_U)："

#: iw/lvm_dialog_gui.py:1335
msgid "Used Space:"
msgstr "已用空間："

#: iw/lvm_dialog_gui.py:1352
msgid "Free Space:"
msgstr "剩餘空間："

#: iw/lvm_dialog_gui.py:1370
msgid "Total Space:"
msgstr "全部磁碟空間："

#: iw/lvm_dialog_gui.py:1408
msgid "Logical Volume Name"
msgstr "邏輯卷冊名稱"

#: iw/lvm_dialog_gui.py:1411 iw/partition_gui.py:610
#: iw/upgrade_swap_gui.py:138 textw/upgrade_text.py:124
msgid "Mount Point"
msgstr "掛載點"

#: iw/lvm_dialog_gui.py:1414 iw/partition_gui.py:609
msgid "Size (MB)"
msgstr "大小（MB）"

#: iw/lvm_dialog_gui.py:1428 iw/osbootwidget.py:96
msgid "_Add"
msgstr "新增(_A)"

#: iw/lvm_dialog_gui.py:1431 iw/osbootwidget.py:100 iw/partition_gui.py:1818
#: iw/partition_gui.py:1828
msgid "_Edit"
msgstr "編輯(_E)"

#: iw/lvm_dialog_gui.py:1446
msgid "_Logical Volumes"
msgstr "邏輯卷冊(_L)"

#: iw/netconfig_dialog.py:192 textw/netconfig_text.py:36
#, fuzzy, python-format
msgid ""
"An error occurred converting the value entered for \"%(field)s\":\n"
"%(errmsg)s"
msgstr ""
"轉換為「%s」輸入的數值時發生錯誤：\n"
"%s"

#: iw/netconfig_dialog.py:195 iw/netconfig_dialog.py:204
#: textw/netconfig_text.py:35 textw/netconfig_text.py:42
msgid "Error With Data"
msgstr "資料錯誤"

#: iw/netconfig_dialog.py:203
#, python-format
msgid "A value is required for the field %s."
msgstr "欄位「%s」需要一個數值。"

#: iw/netconfig_dialog.py:213
#, python-format
msgid "An error occurred trying to bring up the %s network interface."
msgstr "啟用 %s 網路介面時發生了一項錯誤。"

#: iw/netconfig_dialog.py:215
msgid "Error Configuring Network"
msgstr "設定網路時發生了錯誤"

#: iw/netconfig_dialog.py:241
msgid "Dynamic IP Address"
msgstr "動態 IP 位址"

#: iw/netconfig_dialog.py:242
#, python-format
msgid "Sending request for IP address information for %s"
msgstr "正在傳送 %s 之 IP 位址資訊的請求"

#: iw/netconfig_dialog.py:257 iw/netconfig_dialog.py:260
#: textw/netconfig_text.py:225 textw/netconfig_text.py:228
msgid "IP Address"
msgstr "IP 位址"

#: iw/netconfig_dialog.py:267 textw/netconfig_text.py:235
msgid "IPv4 CIDR prefix must be between 0 and 32."
msgstr "IPv4 CIDR 的前置數字必須介於 0 與 32 之間。"

#: iw/netconfig_dialog.py:268 iw/netconfig_dialog.py:274
#: iw/netconfig_dialog.py:282 iw/netconfig_dialog.py:285
#: textw/netconfig_text.py:236 textw/netconfig_text.py:242
#: textw/netconfig_text.py:250
msgid "IPv4 Network Mask"
msgstr "IPv4 網路遮罩"

#: iw/netconfig_dialog.py:295 textw/netconfig_text.py:263
msgid "Gateway"
msgstr "閘道器（Gateway）"

#: iw/netconfig_dialog.py:305 textw/netconfig_text.py:273
msgid "Nameserver"
msgstr "名稱伺服器"

#: iw/netconfig_dialog.py:314
msgid "Error configuring network device:"
msgstr "設定網路裝置時發生錯誤："

#: iw/network_gui.py:67 iw/network_gui.py:73
msgid "Error with Hostname"
msgstr "主機名稱錯誤"

#: iw/network_gui.py:68
msgid "You must enter a valid hostname for this computer."
msgstr "您必須為此電腦輸入一組有效的主機名稱。"

#: iw/network_gui.py:74
#, fuzzy, python-format
msgid ""
"The hostname \"%(hostname)s\" is not valid for the following reason:\n"
"\n"
"%(herrors)s"
msgstr ""
"由於下列原因，主機名稱「%s」無效：\n"
"\n"
"%s"

#: iw/osbootwidget.py:50
msgid "Boot loader operating system list"
msgstr "開機載入程式作業系統清單"

#: iw/osbootwidget.py:66
msgid "Default"
msgstr "預設"

#: iw/osbootwidget.py:66 iw/partition_gui.py:608
msgid "Label"
msgstr "標籤"

#: iw/osbootwidget.py:130
msgid "Image"
msgstr "映像"

#: iw/osbootwidget.py:137
msgid ""
"Enter a label for the boot loader menu to display. The device (or hard drive "
"and partition number) is the device from which it boots."
msgstr ""
"請輸入要顯示在開機載入程式中的標籤。這裡的裝置（或硬碟與分割區號碼）就是要用"
"來開機的裝置。"

#: iw/osbootwidget.py:145
msgid "_Label"
msgstr "標籤(_L)"

#: iw/osbootwidget.py:153
msgid "_Device"
msgstr "裝置(_D)"

#: iw/osbootwidget.py:183
msgid "Default Boot _Target"
msgstr "設成預設開機(_T)"

#: iw/osbootwidget.py:212
msgid "You must specify a label for the entry"
msgstr "您必須指定一個標籤給這個紀錄項"

#: iw/osbootwidget.py:221
msgid "Boot label contains illegal characters"
msgstr "開機識別標籤包含不合規格的字元"

#: iw/osbootwidget.py:245
msgid "Duplicate Label"
msgstr "複製標籤"

#: iw/osbootwidget.py:246
msgid "This label is already in use for another boot entry."
msgstr "這個識別標籤已被另一個開機紀錄使用。"

#: iw/osbootwidget.py:259
msgid "Duplicate Device"
msgstr "複製裝置"

#: iw/osbootwidget.py:260
msgid "This device is already being used for another boot entry."
msgstr "這個裝置已經被另一個開機紀錄使用。"

#: iw/osbootwidget.py:322
msgid "Cannot Delete"
msgstr "無法刪除"

#: iw/osbootwidget.py:323
#, python-format
msgid ""
"This boot target cannot be deleted because it is for the %s system you are "
"about to install."
msgstr "無法刪除這個開機目標，因為它是用於您將要安裝的 %s 系統。"

#: iw/partition_dialog_gui.py:57
msgid "Additional Size Options"
msgstr "額外的大小選項"

#: iw/partition_dialog_gui.py:62
msgid "_Fixed size"
msgstr "固定大小(_F)"

#: iw/partition_dialog_gui.py:64
msgid "Fill all space _up to (MB):"
msgstr "填滿分割區直到（MB）(_u)："

#: iw/partition_dialog_gui.py:71
msgid "Fill to maximum _allowable size"
msgstr "填滿分割區至可使用的最大值(_a)"

#: iw/partition_dialog_gui.py:377
msgid "Add Partition"
msgstr "新增分割區"

#: iw/partition_dialog_gui.py:379
#, python-format
msgid "Edit Partition: %s"
msgstr "編輯分割區：%s"

#: iw/partition_dialog_gui.py:416
msgid "File System _Type:"
msgstr "檔案系統類型(_T)："

#: iw/partition_dialog_gui.py:432
msgid "Allowable _Drives:"
msgstr "可使用的磁碟機(_D)："

#: iw/partition_dialog_gui.py:508
msgid "Force to be a _primary partition"
msgstr "強制成為主要分割區(_p)"

#: iw/partition_gui.py:356
#, fuzzy, python-format
msgid "Drive %(drive)s (%(size)-0.f MB) (Model: %(model)s)"
msgstr "磁碟 %s（%-0.f MB）（型號：%s）"

#: iw/partition_gui.py:396 iw/partition_gui.py:442 iw/partition_gui.py:509
#: iw/partition_gui.py:1000 iw/partition_gui.py:1067
msgid "Free"
msgstr "剩餘空間"

#: iw/partition_gui.py:474
#, fuzzy, python-format
msgid "LVM Volume Group %s (%-0.f MB)"
msgstr "LVM 卷冊群組"

#: iw/partition_gui.py:540
#, python-format
msgid "MD RAID ARRAY %s (%-0.f MB)"
msgstr ""

#: iw/partition_gui.py:611
msgid "Type"
msgstr "類型"

#: iw/partition_gui.py:612 storage/__init__.py:1791
msgid "Format"
msgstr "格式化"

#: iw/partition_gui.py:649
msgid ""
"Mount Point/\n"
"RAID/Volume"
msgstr ""
"掛載點/\n"
"RAID/卷冊"

#: iw/partition_gui.py:651
msgid ""
"Size\n"
"(MB)"
msgstr ""
"大小\n"
"（MB）"

#: iw/partition_gui.py:756
msgid "Partitioning"
msgstr "設定分割區"

#: iw/partition_gui.py:846
msgid ""
"The partitioning scheme you requested caused the following critical errors."
msgstr "您所進行的分割區設定造成了下列重大錯誤。"

#: iw/partition_gui.py:848
#, python-format
msgid ""
"You must correct these errors before you continue your installation of %s."
msgstr "在您繼續安裝 %s 之前，您必須先更正這些錯誤。"

#: iw/partition_gui.py:854
msgid "Partitioning Errors"
msgstr "磁碟分割錯誤"

#: iw/partition_gui.py:861
msgid "The partitioning scheme you requested generated the following warnings."
msgstr "您所進行的分割區設定產生了下列警告。"

#: iw/partition_gui.py:863
msgid "Would you like to continue with your requested partitioning scheme?"
msgstr "您想要繼續使用您設定好的磁碟分割嗎？"

#: iw/partition_gui.py:868
msgid "Partitioning Warnings"
msgstr "磁碟分割警告"

#: iw/partition_gui.py:877
#, fuzzy
msgid ""
"The following pre-existing devices have been selected to be formatted, "
"destroying all data."
msgstr "下列已存在的分割區要被格式化，將會刪除所有資料。"

#: iw/partition_gui.py:889
msgid "Format Warnings"
msgstr "格式化警告"

#: iw/partition_gui.py:894 storage/dasd.py:139
msgid "_Format"
msgstr "格式化(_F)"

#: iw/partition_gui.py:988
msgid "LVM Volume Groups"
msgstr "LVM 卷冊群組"

#: iw/partition_gui.py:1010
msgid "RAID Devices"
msgstr "RAID 裝置"

#: iw/partition_gui.py:1021 loader/hdinstall.c:203
msgid "Hard Drives"
msgstr "硬碟"

#: iw/partition_gui.py:1071
msgid "Extended"
msgstr "延伸"

#: iw/partition_gui.py:1350
msgid "Cannot perform any creation action"
msgstr ""

#: iw/partition_gui.py:1351
msgid ""
"Note that the creation action requires one of the following:\n"
"\n"
"* Free space in one of the Hard Drives.\n"
"* At least two free Software RAID partitions.\n"
"* At least one free physical volume (LVM) partition.\n"
"* At least one Volume Group with free space."
msgstr ""

#: iw/partition_gui.py:1463
#, fuzzy, python-format
msgid ""
"Software RAID allows you to combine several disks into a larger RAID "
"device.  A RAID device can be configured to provide additional speed and "
"reliability compared to using an individual drive.  For more information on "
"using RAID devices please consult the %s documentation.\n"
msgstr ""
"軟體 RAID 讓您能夠結合許多磁碟來成為一個較大的 RAID 裝置。比起使用單獨的磁"
"碟，RAID 裝置可被設定來提昇速度與可靠性。欲取得有關於使用 RAID 裝置上的更多資"
"訊，請參閱 %s 說明文件。"

#: iw/partition_gui.py:1469
msgid ""
"To use RAID you must first create at least two partitions of type 'software "
"RAID'.  Then you can create a RAID device that can be formatted and "
"mounted.\n"
"\n"
msgstr ""
"如要使用 RAID，您必須首先建立至少兩個「軟體 RAID」類型的分割區。然後您便可以"
"建立可格式化與被掛載的 RAID 裝置。\n"
"\n"

#: iw/partition_gui.py:1473
#, fuzzy, python-format
msgid "You currently have %d software RAID partition free to use."
msgid_plural "You currently have %d software RAID partitions free to use."
msgstr[0] "建立軟體 RAID 分割區(_p)。"
msgstr[1] "建立軟體 RAID 分割區(_p)。"

#: iw/partition_gui.py:1477
#, fuzzy
msgid "About RAID"
msgstr "軟體磁碟陣列（RAID）"

#: iw/partition_gui.py:1483
#, python-format
msgid ""
"Logical Volume Manager (LVM) is a 3 level construct. The first level is made "
"up of disks or partitions formatted with LVM metadata called Physical "
"Volumes (PV).  A Volume Group (VG) sits on top of one or more PVs. The VG, "
"in turn, is the base to create one or more Logical Volumes (LV).  Note that "
"a VG can be an aggregate of PVs from multiple physical disks.  For more "
"information on using LVM please consult the %s documentation\n"
msgstr ""

#: iw/partition_gui.py:1491
msgid ""
"To create a PV you need a partition with free space.  To create a VG you "
"need a PV that is not part of any existing VG.  To create an LV you need a "
"VG with free space.\n"
"\n"
msgstr ""

#: iw/partition_gui.py:1495
#, python-format
msgid "You currently have %d available PV free to use.\n"
msgid_plural "You currently have %d available PVs free to use.\n"
msgstr[0] ""
msgstr[1] ""

#: iw/partition_gui.py:1499
msgid "You currently have free space to create PVs."
msgstr ""

#: iw/partition_gui.py:1502
msgid "About LVM"
msgstr ""

#: iw/partition_gui.py:1533
msgid "Couldn't Create Drive Clone Editor"
msgstr "無法建立磁碟複製編輯器"

#: iw/partition_gui.py:1534
msgid "The drive clone editor could not be created for some reason."
msgstr "由於某種原因，無法建立磁碟複製編輯器。"

#: iw/partition_gui.py:1592 storage/partitioning.py:196
#: storage/partitioning.py:239
msgid "Error Partitioning"
msgstr "設定分割區錯誤"

#: iw/partition_gui.py:1593
#, python-format
msgid "Could not allocate requested partitions: %s."
msgstr "無法配置要求的分割區：%s。"

#: iw/partition_gui.py:1602
#, python-format
msgid "Warning: %s."
msgstr "警告：%s。"

#: iw/partition_gui.py:1633
msgid "Unable To Edit"
msgstr "無法編輯"

#: iw/partition_gui.py:1634
#, python-format
msgid ""
"You cannot edit this device:\n"
"\n"
"%s"
msgstr ""
"您無法編輯這個裝置：\n"
"\n"
"%s"

#: iw/partition_gui.py:1817
msgid "_Create"
msgstr ""

#: iw/partition_gui.py:1820
msgid "Re_set"
msgstr "重設(_s)"

#: iw/partition_gui.py:1843
#, fuzzy
msgid "Please Select A Device"
msgstr "請選擇一個來源磁碟。"

#: iw/partition_ui_helpers_gui.py:312
msgid "_Format as:"
msgstr "格式化為(_F)："

#: iw/partition_ui_helpers_gui.py:334
msgid "Mi_grate filesystem to:"
msgstr "轉換檔案系統(_g)："

#: iw/partition_ui_helpers_gui.py:364
msgid "_Resize"
msgstr "重設大小(_R)"

#: iw/partition_ui_helpers_gui.py:435
#, python-format
msgid ""
"Partitions of type '%s' must be constrained to a single drive.  To do this, "
"select the drive in the 'Allowable Drives' checklist."
msgstr ""
"「%s」類型的分割區必須限制在單一的磁碟中。這可藉由在「可使用的磁碟」清單中選"
"擇磁碟來做到。"

#: iw/progress_gui.py:37
msgid "Installing Packages"
msgstr "正在安裝套件"

#: iw/raid_dialog_gui.py:382
msgid ""
"At least two unused software RAID partitions are needed to create a RAID "
"device.\n"
"\n"
"First create at least two partitions of type \"software RAID\", and then "
"select the \"RAID\" option again."
msgstr ""
"需要至少兩個未使用的軟體 RAID 分割區來建立 RAID 裝置。\n"
"\n"
"首先建立至少兩個「軟體 RAID」類型的分割區，然後再選擇「RAID」選項。"

#: iw/raid_dialog_gui.py:396
msgid "Make RAID Device"
msgstr "建立 RAID 裝置"

#: iw/raid_dialog_gui.py:399
#, python-format
msgid "Edit RAID Device: %s"
msgstr "編輯 RAID 裝置：%s"

#: iw/raid_dialog_gui.py:401
msgid "Edit RAID Device"
msgstr "編輯 RAID 裝置"

#: iw/raid_dialog_gui.py:468
msgid "RAID _Device:"
msgstr "RAID 裝置(_D)："

#: iw/raid_dialog_gui.py:486
msgid "RAID _Level:"
msgstr "RAID 類型(_L)："

#: iw/raid_dialog_gui.py:528
msgid "_RAID Members:"
msgstr "RAID 成員(_R)："

#: iw/raid_dialog_gui.py:545
msgid "Number of _spares:"
msgstr "備援裝置的數量(_s)："

#: iw/raid_dialog_gui.py:555
msgid "_Format partition?"
msgstr "格式化分割區(_F)？"

#: iw/raid_dialog_gui.py:629
msgid ""
"The source drive has no partitions to be cloned.  You must first define "
"partitions of type 'software RAID' on this drive before it can be cloned."
msgstr ""
"來源磁碟沒有要複製的分割區。在做磁碟複製之前，您必須在該磁碟上先定義「軟體 "
"RAID」類型的分割區。"

#: iw/raid_dialog_gui.py:633 iw/raid_dialog_gui.py:639
#: iw/raid_dialog_gui.py:653 iw/raid_dialog_gui.py:666
msgid "Source Drive Error"
msgstr "來源磁碟錯誤"

#: iw/raid_dialog_gui.py:640
msgid ""
"The source drive you selected has partitions which are not of type 'software "
"RAID'.\n"
"\n"
"You must remove these partitions before this drive can be cloned. "
msgstr ""
"您選取的來源磁碟含有非「軟體 RAID」類型的分割區。\n"
"\n"
"在做磁碟複製之前，您必須先移除這些分割區。"

#: iw/raid_dialog_gui.py:654
#, python-format
msgid ""
"The source drive you selected has partitions which are not constrained to "
"the drive %s.\n"
"\n"
"You must remove these partitions or restrict them to this drive before this "
"drive can be cloned. "
msgstr ""
"您所選取的來源磁碟含有不限於磁碟 %s 的分割區。\n"
"\n"
"在做磁碟複製之前，這些分割區必須先被移除或將之限於這個磁碟。"

#: iw/raid_dialog_gui.py:667
msgid ""
"The source drive you selected has software RAID partition(s) which are "
"members of an active software RAID device.\n"
"\n"
"You must remove these partitions before this drive can be cloned."
msgstr ""
"您所選取的來源磁碟含有使用中的軟體 RAID 裝置的軟體 RAID 分割區成員。\n"
"\n"
"在做磁碟複製之前，您必須先移除這些分割區。"

#: iw/raid_dialog_gui.py:681 iw/raid_dialog_gui.py:687
#: iw/raid_dialog_gui.py:703
msgid "Target Drive Error"
msgstr "目標磁碟錯誤"

#: iw/raid_dialog_gui.py:682
msgid "Please select the target drives for the clone operation."
msgstr "請選擇複製操作的目標磁碟。"

#: iw/raid_dialog_gui.py:688
#, python-format
msgid "The source drive %s cannot be selected as a target drive as well."
msgstr "來源磁碟 %s 不能同時被選取為目標磁碟。"

#: iw/raid_dialog_gui.py:704
#, fuzzy, python-format
msgid ""
"The target drive %(path)s has a partition which cannot be removed for the "
"following reason:\n"
"\n"
"\"%(rc)s\"\n"
"\n"
"You must remove this partition before this drive can be a target."
msgstr ""
"基於下列原因，目標磁碟 %s 有一個分割區無法移除：\n"
"\n"
"「%s」\n"
"\n"
"若要這個磁碟作為目標磁碟，您必須移除此分割區。"

#: iw/raid_dialog_gui.py:767
msgid "Please select a source drive."
msgstr "請選擇一個來源磁碟。"

#: iw/raid_dialog_gui.py:787
#, python-format
msgid ""
"The drive %s will now be cloned to the following drives:\n"
"\n"
msgstr ""
"磁碟 %s 現在將會被複製到下列的磁碟：\n"
"\n"

#: iw/raid_dialog_gui.py:792
msgid ""
"\n"
"\n"
"WARNING! ALL DATA ON THE TARGET DRIVES WILL BE DESTROYED."
msgstr ""
"\n"
"\n"
"警告！ 目標磁碟上的所有資料將會被摧毀。"

#: iw/raid_dialog_gui.py:795
msgid "Final Warning"
msgstr "最後警告"

#: iw/raid_dialog_gui.py:797
msgid "Clone Drives"
msgstr "複製磁碟"

#: iw/raid_dialog_gui.py:806
msgid "There was an error clearing the target drives.  Cloning failed."
msgstr "清除目標磁碟時發生錯誤。磁碟複製失敗。"

#: iw/raid_dialog_gui.py:829
#, fuzzy
msgid "Clone Drive Tool"
msgstr "複製磁碟"

#: iw/raid_dialog_gui.py:838
msgid ""
"This tool clones the layout from a partitioned source onto other similar "
"sized drives. The source must have partitions which are restricted to that "
"drive and must ONLY contain unused software RAID partitions.  EVERYTHING on "
"the target drive(s) will be destroyed.\n"
msgstr ""

#: iw/raid_dialog_gui.py:849
msgid "Source Drive:"
msgstr "來源磁碟："

#: iw/raid_dialog_gui.py:857
msgid "Target Drive(s):"
msgstr "目標磁碟："

#: iw/raid_dialog_gui.py:865
msgid "Drives"
msgstr "磁碟"

#: iw/task_gui.py:70
#, python-format
msgid ""
"Unable to read package metadata from repository.  This may be due to a "
"missing repodata directory.  Please ensure that your repository has been "
"correctly generated.\n"
"\n"
"%s"
msgstr ""
"無法從軟體庫讀取套件的元資料。可能是因為缺少了 repodata 目錄的關係。請確定您"
"的軟體庫已經正確產生。\n"
"\n"
"%s"

#: iw/task_gui.py:147
msgid "Edit Repository"
msgstr "編輯軟體庫"

#: iw/task_gui.py:171
#, python-format
msgid ""
"The repository %s has already been added.  Please choose a different "
"repository name and URL."
msgstr "已加入軟體庫 %s，請選擇另一個軟體庫名稱與網址。"

#: iw/task_gui.py:251
msgid "Invalid Proxy URL"
msgstr "Proxy URL 無效"

#: iw/task_gui.py:252
msgid "You must provide an HTTP, HTTPS, or FTP URL to a proxy."
msgstr "您必須為 proxy 提供 HTTP、HTTPS 或 FTP 網址。"

#: iw/task_gui.py:264 iw/task_gui.py:431
msgid "Invalid Repository URL"
msgstr "軟體庫 URL 無效"

#: iw/task_gui.py:265 iw/task_gui.py:432
msgid "You must provide an HTTP, HTTPS, or FTP URL to a repository."
msgstr "您必須為軟體庫提供 HTTP、HTTPS 或 FTP 網址。"

#: iw/task_gui.py:286 iw/task_gui.py:441
msgid "No Media Found"
msgstr "找不到媒介"

#: iw/task_gui.py:287 iw/task_gui.py:442
msgid ""
"No installation media was found. Please insert a disc into your drive and "
"try again."
msgstr "找不到安裝媒介。請將光碟插入您的光碟機並重新嘗試。"

#: iw/task_gui.py:318 iw/task_gui.py:465
msgid "Please enter an NFS server and path."
msgstr "請輸入一個 NFS 伺服器與路徑。"

#: iw/task_gui.py:337
#, python-format
msgid ""
"The following error occurred while setting up the repository:\n"
"\n"
"%s"
msgstr ""
"設定軟體庫時發生了下列錯誤：\n"
"\n"
"%s"

#: iw/task_gui.py:360
msgid "Invalid Repository Name"
msgstr "軟體庫名稱無效"

#: iw/task_gui.py:361
msgid "You must provide a repository name."
msgstr "您必須提供一組軟體庫名稱。"

#: iw/task_gui.py:497 ui/addrepo.glade.h:3
msgid "Add Repository"
msgstr "新增軟體庫"

#: iw/task_gui.py:502
msgid "No Software Repos Enabled"
msgstr "未啟用任何軟體軟體庫"

#: iw/task_gui.py:503
msgid ""
"You must have at least one software repository enabled to continue "
"installation."
msgstr "在您繼續進行安裝之前，您必須擁有至少一個軟體儲存庫。"

#: iw/timezone_gui.py:63 textw/timezone_text.py:95
msgid "Time Zone Selection"
msgstr "選擇時區"

#: iw/upgrade_bootloader_gui.py:37 textw/upgrade_bootloader_text.py:137
msgid "Upgrade Boot Loader Configuration"
msgstr "升級開機管理程式設定"

#: iw/upgrade_bootloader_gui.py:123
msgid "_Update boot loader configuration"
msgstr "更新開機管理程式設定(_U)"

#: iw/upgrade_bootloader_gui.py:124
msgid "This will update your current boot loader."
msgstr "這將會更新您目前的開機管理程式。"

#: iw/upgrade_bootloader_gui.py:128 textw/upgrade_bootloader_text.py:108
msgid ""
"Due to system changes, your boot loader configuration can not be "
"automatically updated."
msgstr "基於系統的變更，您的開機載入程式設定無法自動地更新。"

#: iw/upgrade_bootloader_gui.py:131 textw/upgrade_bootloader_text.py:112
msgid ""
"The installer is unable to detect the boot loader currently in use on your "
"system."
msgstr "安裝程式偵測不到目前在您系統使用的開機管理程式。"

#: iw/upgrade_bootloader_gui.py:138 textw/upgrade_bootloader_text.py:121
#, fuzzy, python-format
msgid ""
"The installer has detected the %(type)s boot loader currently installed on %"
"(bootDev)s."
msgstr "安裝程式偵測到 %s 開機管理程式已安裝在 %s。"

#: iw/upgrade_bootloader_gui.py:142
msgid "This is the recommended option."
msgstr "這是建議選項。"

#: iw/upgrade_bootloader_gui.py:147
msgid "_Create new boot loader configuration"
msgstr "建立新的開機管理程式設定(_C)"

#: iw/upgrade_bootloader_gui.py:149
msgid ""
"This option creates a new boot loader configuration.  If you wish to switch "
"boot loaders, you should choose this."
msgstr ""
"這將會讓您建立一個新的開機載入程式設定。如果您希望轉換為不同的開機載入程式，"
"您應該選取此選項。"

#: iw/upgrade_bootloader_gui.py:156
msgid "_Skip boot loader updating"
msgstr "略過更新開機管理程式(_S)"

#: iw/upgrade_bootloader_gui.py:157
msgid ""
"This option makes no changes to boot loader configuration.  If you are using "
"a third party boot loader, you should choose this."
msgstr ""
"這將不會改變開機載入程式設定。如果您使用第三方的開機載入程式，您應該選取此選"
"項。"

#: iw/upgrade_bootloader_gui.py:168
msgid "What would you like to do?"
msgstr "您想要怎麼做？"

#: iw/upgrade_migratefs_gui.py:38 textw/upgrade_text.py:42
msgid "Migrate File Systems"
msgstr "轉換檔案系統"

#: iw/upgrade_migratefs_gui.py:69 textw/upgrade_text.py:44
#, fuzzy, python-format
msgid ""
"This release of %(productName)s supports an updated file system, which has "
"several benefits over the file system traditionally shipped in %(productName)"
"s.  This installation program can migrate formatted partitions without data "
"loss.\n"
"\n"
"Which of these partitions would you like to migrate?"
msgstr ""
"這個 %s 版本支援更新的檔案系統，這比之前 %s 所附的傳統檔案系統多出許多新的功"
"能。此安裝程式可將格式化的分割區進行遷移而不流失資料。\n"
"\n"
"您想要遷移哪些分割區？"

#: iw/upgrade_swap_gui.py:35
msgid "Upgrade Swap Partition"
msgstr "升級 Swap 分割區"

#: iw/upgrade_swap_gui.py:92 textw/upgrade_text.py:107
#, python-format
msgid ""
"Recent kernels (2.4 or newer) need significantly more swap than older "
"kernels, up to twice the amount of RAM on the system.  You currently have %"
"dMB of swap configured, but you may create additional swap space on one of "
"your file systems now."
msgstr ""
"2.4（或更新）版核心比舊版本的核心需要更多的 swap 空間，約為您系統記憶體大小的"
"兩倍。您目前配置了 %dMB 的 swap 空間，您現在可以再新增額外的 swap 空間在您其"
"中的一個檔案系統上。"

#: iw/upgrade_swap_gui.py:99
#, python-format
msgid ""
"\n"
"\n"
"The installer has detected %s MB of RAM.\n"
msgstr ""
"\n"
"\n"
"安裝程式偵測到 %s MB 的記憶體。\n"

#: iw/upgrade_swap_gui.py:111
msgid "I _want to create a swap file"
msgstr "我想要建立一個 swap 檔案(_w)"

#: iw/upgrade_swap_gui.py:120
msgid "Select the _partition to put the swap file on:"
msgstr "選擇要放置 swap 檔案的分割區(_p)："

#: iw/upgrade_swap_gui.py:138 textw/upgrade_text.py:125
msgid "Partition"
msgstr "設定分割區"

#: iw/upgrade_swap_gui.py:138
msgid "Free Space (MB)"
msgstr "剩餘空間（MB）"

#: iw/upgrade_swap_gui.py:156
#, python-format
msgid ""
"A minimum swap file size of %d MB is recommended.  Please enter a size for "
"the swap file:"
msgstr "建議您的 swap 檔案大小至少要 %d MB。請輸入 swap 檔案的大小："

#: iw/upgrade_swap_gui.py:171
msgid "Swap file _size (MB):"
msgstr "swap 檔案大小（MB）(_s)："

#: iw/upgrade_swap_gui.py:181
msgid "I _don't want to create a swap file"
msgstr "我不想要建立 swap 檔案(_d)"

#: iw/upgrade_swap_gui.py:191
msgid ""
"A swap file is strongly recommended. Failure to create one could cause the "
"installer to abort abnormally.  Are you sure you wish to continue?"
msgstr ""
"強烈建議您建立一個 swap 檔案。若不建立將可能會造成安裝程式不正常中止。您確定"
"要繼續？"

#: iw/upgrade_swap_gui.py:199 textw/upgrade_text.py:194
msgid "The swap file must be between 1 and 2000 MB in size."
msgstr "swap 檔案的大小必須介於 1 至 2000 MB 之間。"

#: iw/upgrade_swap_gui.py:206 textw/upgrade_text.py:189
msgid ""
"There is not enough space on the device you selected for the swap partition."
msgstr "您所選擇的裝置空間不足以建立 swap 分割區。"

#: iw/welcome_gui.py:56 textw/welcome_text.py:36
msgid "Network Install Required"
msgstr "需要網路安裝"

#: iw/welcome_gui.py:57 textw/welcome_text.py:37
msgid ""
"Your installation source is set to a network location, but no netork devices "
"were found on your system.  To avoid a network installation, boot with the "
"full DVD, full CD set, or do not pass a repo= parameter that specifies a "
"network source."
msgstr ""
"您的安裝來源已設為一個網路位置，不過您的系統上找不到網路裝置。若要避免網路安"
"裝，請透過完整的 DVD、CD 組來開機，或是不要傳送一個指定網路來源的 repo= 參"
"數。"

#: iw/welcome_gui.py:67
msgid "E_xit Installer"
msgstr "退出安裝程式(_x)"

#: iw/zipl_gui.py:37
msgid "z/IPL Boot Loader Configuration"
msgstr "z/IPL 開機管理程式設定"

#: iw/zipl_gui.py:61
msgid "The z/IPL boot loader will be installed on your system."
msgstr "z/IPL 開機管理程式將會安裝在您的系統中。"

#: iw/zipl_gui.py:63
msgid ""
"The z/IPL Boot Loader will now be installed on your system.\n"
"\n"
"The root partition will be the one you selected previously in the partition "
"setup.\n"
"\n"
"The kernel used to start the machine will be the one to be installed by "
"default.\n"
"\n"
"If you wish to make changes later after the installation feel free to change "
"the /etc/zipl.conf configuration file.\n"
"\n"
"You can now enter any additional kernel parameters which your machine or "
"your setup may require."
msgstr ""
"現在將要安裝 z/IPL 開機管理程式。\n"
"\n"
"root 分割區將會是您之前在分割區設定中選擇的那個。\n"
"\n"
"使用來啟動機器的核心會是預設安裝的那個。\n"
"\n"
"假如您想要在安裝後作任何的變更，請更改 /etc/zipl.conf 設定檔案。\n"
"\n"
"現在您可以輸入任何您機器或設定所需的額外核心參數。"

#: iw/zipl_gui.py:90 textw/zipl_text.py:72
msgid "Kernel Parameters"
msgstr "核心參數"

#: iw/zipl_gui.py:93 iw/zipl_gui.py:96
msgid "Chandev Parameters"
msgstr "Chandev 參數"

#: loader/cdinstall.c:185 loader/cdinstall.c:206 loader/mediacheck.c:60
msgid "Media Check"
msgstr "媒體測試"

#: loader/cdinstall.c:185 loader/cdinstall.c:188 loader/cdinstall.c:206
#: loader/cdinstall.c:214 loader/method.c:324
msgid "Test"
msgstr "測試"

#: loader/cdinstall.c:185 loader/cdinstall.c:189
msgid "Eject Disc"
msgstr "退出光碟片"

#: loader/cdinstall.c:186
#, c-format
msgid ""
"Choose \"%s\" to test the disc currently in the drive, or \"%s\" to eject "
"the disc and insert another for testing."
msgstr ""
"選取「%s」來測試光碟機裡的光碟片，或選取「%s」來退出光碟片並放入另一片以進行"
"測試。"

#: loader/cdinstall.c:207
#, c-format
msgid ""
"If you would like to test additional media, insert the next disc and press "
"\"%s\". Testing each disc is not strictly required, however it is highly "
"recommended.  Minimally, the discs should be tested prior to using them for "
"the first time. After they have been successfully tested, it is not required "
"to retest each disc prior to using it again."
msgstr ""
"如果您想要測試額外的媒介，請插入下一張光碟，並按下「%s」。您不一定要測試每一"
"張光碟；然而我們強烈建議您這麼做。最起碼，您在第一次使用光碟前，應該先進行測"
"試。光碟測試成功後，您就不需要每次都進行測試。"

#: loader/cdinstall.c:229
#, c-format
msgid ""
"The %s disc was not found in any of your drives. Please insert the %s disc "
"and press %s to retry."
msgstr "在您的光碟機中找不到 %s 光碟片。請置入 %s 光碟片，並按下 %s 來重試。"

#: loader/cdinstall.c:248
msgid "Disc Found"
msgstr "找到光碟片"

#: loader/cdinstall.c:249
#, c-format
msgid ""
"To begin testing the media before installation press %s.\n"
"\n"
"Choose %s to skip the media test and start the installation."
msgstr ""
"若在安裝前開始測試光碟媒體，請按下 %s。\n"
"\n"
"選取 %s 來略過媒體測試並開始安裝程式。"

#: loader/cdinstall.c:330
msgid "Scanning"
msgstr "掃描中"

#: loader/cdinstall.c:330
#, c-format
msgid "Looking for installation images on CD device %s\n"
msgstr "正在尋找 CD 裝置 %s 上的安裝映像檔\n"

#: loader/cdinstall.c:332
#, c-format
msgid "Looking for installation images on CD device %s"
msgstr "正在尋找 CD 裝置 %s 上的安裝映像檔"

#: loader/cdinstall.c:424
#, c-format
msgid ""
"The %s disc was not found in any of your CDROM drives. Please insert the %s "
"disc and press %s to retry."
msgstr "在您的光碟機中找不到 %s 光碟片。請置入 %s 光碟片，並按下 %s 來重試。"

#: loader/cdinstall.c:430
msgid "Disc Not Found"
msgstr "找不到光碟片"

#: loader/cdinstall.c:431 loader/driverdisk.c:423 loader/driverdisk.c:461
#: loader/driverdisk.c:542 loader/driverselect.c:78 loader/driverselect.c:152
#: loader/driverselect.c:178 loader/hdinstall.c:203 loader/hdinstall.c:257
#: loader/kbd.c:119 loader/loader.c:506 loader/loader.c:523
#: loader/loader.c:1372 loader/loader.c:1405 loader/net.c:579 loader/net.c:950
#: loader/net.c:1851 loader/net.c:1870 loader/nfsinstall.c:91
#: loader/urls.c:258 storage/__init__.py:109 storage/__init__.py:155
#: storage/devicetree.py:89 textw/constants_text.py:52
msgid "Back"
msgstr "上一步"

#: loader/cdinstall.c:505
msgid "Cannot find kickstart file on CDROM."
msgstr "在光碟片上找不到 kickstart 檔案。"

#: loader/copy.c:51 loader/method.c:278
#, c-format
msgid "Failed to read directory %s: %m"
msgstr "無法讀取目錄 %s：%m"

#: loader/driverdisk.c:304
msgid "Loading"
msgstr "載入中"

#: loader/driverdisk.c:304
msgid "Reading driver disk"
msgstr "正在讀取驅動程式磁片中"

#: loader/driverdisk.c:417 loader/driverdisk.c:456
msgid "Driver Disk Source"
msgstr "驅動程式磁片來源"

#: loader/driverdisk.c:418
msgid ""
"You have multiple devices which could serve as sources for a driver disk.  "
"Which would you like to use?"
msgstr "你的系統有多個裝置可當作驅動程式磁片的來源。您想要使用那一個？"

#: loader/driverdisk.c:457
msgid ""
"There are multiple partitions on this device which could contain the driver "
"disk image.  Which would you like to use?"
msgstr "這裝置中，有多個分割區包含驅動程式磁片的映像檔。您想要使用哪一個？"

#: loader/driverdisk.c:492
msgid "Failed to mount partition."
msgstr "無法掛載分割區。"

#: loader/driverdisk.c:497
msgid "Select driver disk image"
msgstr "選擇驅動程式磁片映像檔"

#: loader/driverdisk.c:498
msgid "Select the file which is your driver disk image."
msgstr "請選擇您的驅動程式磁片映像檔。"

#: loader/driverdisk.c:527
msgid "Failed to load driver disk from file."
msgstr "無法從檔案載入驅動程式磁片。"

#: loader/driverdisk.c:539
#, c-format
msgid "Insert your driver disk into /dev/%s and press \"OK\" to continue."
msgstr "請放入驅動程式磁片到 /dev/%s，並按「確定」繼續。"

#: loader/driverdisk.c:542
msgid "Insert Driver Disk"
msgstr "放入驅動程式磁片"

#: loader/driverdisk.c:555
msgid "Failed to mount driver disk."
msgstr "無法掛載驅動程式磁片。"

#: loader/driverdisk.c:563
#, c-format
msgid "Driver disk is invalid for this release of %s."
msgstr "驅動程式磁片不適用於 %s 的此版本。"

#: loader/driverdisk.c:626
msgid "Manually choose"
msgstr "手動選取"

#: loader/driverdisk.c:627
msgid "Load another disk"
msgstr "載入另一片磁片"

#: loader/driverdisk.c:628
msgid ""
"No devices of the appropriate type were found on this driver disk.  Would "
"you like to manually select the driver, continue anyway, or load another "
"driver disk?"
msgstr ""
"在這片驅動程式磁片上找不到適當的裝置類型。您想要手動選取驅動程式或繼續進行，"
"或者要放入另一片驅動程式磁片？"

#: loader/driverdisk.c:666
msgid "Driver disk"
msgstr "驅動程式磁片"

#: loader/driverdisk.c:667
msgid "Do you have a driver disk?"
msgstr "你有驅動程式的磁片嗎？"

#: loader/driverdisk.c:676
msgid "More Driver Disks?"
msgstr "還有其他的驅動程式磁片嗎？"

#: loader/driverdisk.c:677
msgid "Do you wish to load any more driver disks?"
msgstr "您想要載入其他驅動程式磁片嗎？"

#: loader/driverdisk.c:722 loader/driverdisk.c:761 loader/hdinstall.c:349
#: loader/kickstart.c:132 loader/kickstart.c:142 loader/kickstart.c:184
#: loader/kickstart.c:189 loader/kickstart.c:510 loader/modules.c:381
#: loader/modules.c:397 loader/net.c:1558 loader/net.c:1579
#: loader/nfsinstall.c:366 loader/urlinstall.c:372 loader/urlinstall.c:383
#: loader/urlinstall.c:390
msgid "Kickstart Error"
msgstr "Kickstart 錯誤"

#: loader/driverdisk.c:723
#, c-format
msgid "Unknown driver disk kickstart source: %s"
msgstr "不明的 kickstart 驅動程式磁片來源：%s"

#: loader/driverdisk.c:762
#, fuzzy, c-format
msgid ""
"The following invalid argument was specified for the kickstart driver disk "
"command: %s"
msgstr "下列 kickstart 驅動程式磁片之指令的引數無效：%s:%s"

#: loader/driverselect.c:67
#, c-format
msgid ""
"Please enter any parameters which you wish to pass to the %s module "
"separated by spaces.  If you don't know what parameters to supply, skip this "
"screen by pressing the \"OK\" button."
msgstr ""
"請輸入您想要傳送到 %s 模組的任何參數（請以空白分隔）。如果您不知道該加什麼參"
"數， 請按「確定」鈕來跳過這個畫面。"

#: loader/driverselect.c:88
msgid "Enter Module Parameters"
msgstr "請輸入模組參數"

#: loader/driverselect.c:151
msgid "No drivers found"
msgstr "找不到驅動程式"

#: loader/driverselect.c:151
msgid "Load driver disk"
msgstr "載入驅動程式磁片"

#: loader/driverselect.c:152
msgid ""
"No drivers were found to manually insert.  Would you like to use a driver "
"disk?"
msgstr "找不到驅動程式，您想要使用一片驅動程式磁片嗎？"

#: loader/driverselect.c:170
msgid ""
"Please select the driver below which you wish to load.  If it does not "
"appear and you have a driver disk, press F2."
msgstr ""
"請在以下選取您想要載入的驅動程式？ 如果在清單中找不到您要的，而且您有一片驅動"
"程式磁片，請按 <F2>。"

#: loader/driverselect.c:179
msgid "Specify optional module arguments"
msgstr "指定額外的模組引數"

#: loader/driverselect.c:204
msgid "Select Device Driver to Load"
msgstr "選擇要載入的裝置驅動程式"

#: loader/hdinstall.c:116
msgid ""
"An error occured finding the installation image on your hard drive.  Please "
"check your images and try again."
msgstr "搜尋您硬碟上的安裝映像檔時發生了錯誤。請檢查您的映像檔然後再試一次。"

#: loader/hdinstall.c:204
msgid ""
"You don't seem to have any hard drives on your system! Would you like to "
"configure additional devices?"
msgstr "您的系統似乎沒有硬碟！ 您想要設定其他裝置嗎？"

#: loader/hdinstall.c:217
#, c-format
msgid ""
"What partition and directory on that partition holds the installation image "
"for %s?  If you don't see the disk drive you're using listed here, press F2 "
"to configure additional devices."
msgstr ""
"在該分割區上那一個分割區與目錄含有 %s 的映像檔？如果您在這裡沒有看到您使用中"
"的硬碟，請按下 F2 來設定其它裝置。"

#: loader/hdinstall.c:241
msgid "Directory holding image:"
msgstr "存放映像檔的目錄："

#: loader/hdinstall.c:269
msgid "Select Partition"
msgstr "選擇分割區"

#: loader/hdinstall.c:316
#, c-format
msgid "Device %s does not appear to contain an installation image."
msgstr "裝置 %s 並不含有安裝映像檔。"

#: loader/hdinstall.c:350
#, fuzzy, c-format
msgid "Bad argument to HD kickstart method command: %s"
msgstr "硬碟 kickstart 方式之指令 %s 的引數不正確：%s"

#: loader/hdinstall.c:422 loader/hdinstall.c:478
msgid "Cannot find kickstart file on hard drive."
msgstr "在硬碟上找不到 kickstart 檔案。"

#: loader/hdinstall.c:465
#, c-format
msgid "Cannot find hard drive for BIOS disk %s"
msgstr "無法為 BIOS 磁碟 %s 找到硬碟"

#: loader/kbd.c:117
msgid "Keyboard Type"
msgstr "鍵盤類型"

#: loader/kbd.c:118
msgid "What type of keyboard do you have?"
msgstr "您使用的是那一種鍵盤呢？"

#: loader/kickstart.c:133
#, c-format
msgid "Error opening kickstart file %s: %m"
msgstr "開啟 kickstart 檔案 %s 時發生錯誤：%m"

#: loader/kickstart.c:143
#, c-format
msgid "Error reading contents of kickstart file %s: %m"
msgstr "讀取 kickstart 檔案 %s 的內容時發生錯誤：%m"

#: loader/kickstart.c:185
#, c-format
msgid "Error in %s on line %d of kickstart file %s."
msgstr "在 %s 位於第 %d 行在 kickstart 檔案 %s 有錯誤發生。"

#: loader/kickstart.c:190
#, fuzzy, c-format
msgid "Missing options on line %d of kickstart file %s."
msgstr "在 %s 位於第 %d 行在 kickstart 檔案 %s 有錯誤發生。"

#: loader/kickstart.c:297
msgid "Cannot find ks.cfg on removable media."
msgstr "卸除式媒介上找不到 ks.cfg 這個檔案。"

#: loader/kickstart.c:333
msgid ""
"Unable to download the kickstart file.  Please modify the kickstart "
"parameter below or press Cancel to proceed as an interactive installation."
msgstr ""
"無法下載 kickstart 檔案。請在下列修改 kickstart 參數或按下「取消」來進行互動"
"式安裝程序。"

#: loader/kickstart.c:342
msgid "Error downloading kickstart file"
msgstr "下載 kickstart 檔案時發生錯誤"

#: loader/kickstart.c:511
#, fuzzy, c-format
msgid "Bad argument to shutdown kickstart method command: %s"
msgstr "關閉 kickstart 所用的參數 %s不正確：%s"

#: loader/lang.c:63 loader/loader.c:223
#, c-format
msgid "Welcome to %s for %s"
msgstr "歡迎使用 %s 的 %s"

#: loader/lang.c:64
#, c-format
msgid "Welcome to %s for %s - Rescue Mode"
msgstr "歡迎使用 %s 的 %s - 救援模式"

#: loader/lang.c:65 loader/loader.c:247
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "      <Tab>/<Alt-Tab> 移動游標 | <Space> 選取 | <F12> 下一個畫面"

#: loader/lang.c:369
msgid "Choose a Language"
msgstr "選擇語言"

#: loader/loader.c:131
msgid "Local CD/DVD"
msgstr "本機 CD/DVD"

#: loader/loader.c:132
msgid "Hard drive"
msgstr "硬碟"

#: loader/loader.c:133
msgid "NFS directory"
msgstr "NFS 目錄"

#: loader/loader.c:460 loader/loader.c:501
msgid "Update Disk Source"
msgstr "更新磁片來源"

#: loader/loader.c:461
msgid ""
"You have multiple devices which could serve as sources for an update disk.  "
"Which would you like to use?"
msgstr "您的系統有多個裝置可以當作更新磁片的來源。您想要使用那一個？"

#: loader/loader.c:502
msgid ""
"There are multiple partitions on this device which could contain the update "
"disk image.  Which would you like to use?"
msgstr "這裝置中，有多個分割區包含更新磁片的映像檔。您想要使用哪一個？"

#: loader/loader.c:520
#, c-format
msgid "Insert your updates disk into %s and press \"OK\" to continue."
msgstr "請放入您的更新磁片到 %s 中並按下「OK」繼續。"

#: loader/loader.c:523
msgid "Updates Disk"
msgstr "更新磁片"

#: loader/loader.c:541
msgid "Failed to mount updates disk"
msgstr "掛載更新磁片失敗"

#: loader/loader.c:546
msgid "Updates"
msgstr "更新"

#: loader/loader.c:546
msgid "Reading anaconda updates"
msgstr "正在讀取 anaconda 更新程式"

#: loader/loader.c:582
msgid ""
"Unable to download the updates image.  Please modify the updates location "
"below or press Cancel to proceed without updates.."
msgstr ""
"無法下載更新映像檔。請在下列修改更新位址或按下「取消」來在不更新的情況下繼續"
"進行.."

#: loader/loader.c:591
msgid "Error downloading updates image"
msgstr "下載更新映像檔時發生錯誤"

#: loader/loader.c:1187
#, c-format
msgid "You do not have enough RAM to install %s on this machine."
msgstr "本機器沒有足夠的記憶體可供安裝 %s。"

#: loader/loader.c:1241
msgid "Media Detected"
msgstr "偵測到媒介"

#: loader/loader.c:1242
msgid "Found local installation media"
msgstr "已偵測到本機的安裝媒介"

#: loader/loader.c:1364
msgid "Rescue Method"
msgstr "救援方式"

#: loader/loader.c:1365
msgid "Installation Method"
msgstr "安裝方式"

#: loader/loader.c:1367
msgid "What type of media contains the rescue image?"
msgstr "您的救援映像檔存放在那一種媒體上呢？"

#: loader/loader.c:1369
msgid "What type of media contains the installation image?"
msgstr "包含著安裝映像檔的是哪一類型的媒介？"

#: loader/loader.c:1404
msgid "No driver found"
msgstr "找不到驅動程式"

#: loader/loader.c:1404
msgid "Select driver"
msgstr "選擇驅動程式"

#: loader/loader.c:1405
msgid "Use a driver disk"
msgstr "使用驅動程式的磁片"

#: loader/loader.c:1406
msgid ""
"Unable to find any devices of the type needed for this installation type.  "
"Would you like to manually select your driver or use a driver disk?"
msgstr ""
"找不到這種安裝類型所需的任何裝置類型。您想要手動選取您的驅動程式或使用驅動程"
"式磁片？"

#: loader/loader.c:1634
msgid "The following devices have been found on your system."
msgstr "已經在您的系統上找到下列裝置。"

#: loader/loader.c:1636
msgid ""
"No device drivers have been loaded for your system.  Would you like to load "
"any now?"
msgstr "並沒有為您的系統載入任何的裝置驅動程式，您想要現在載入嗎？"

#: loader/loader.c:1640
msgid "Devices"
msgstr "裝置"

#: loader/loader.c:1641
msgid "Done"
msgstr "完成"

#: loader/loader.c:1642
msgid "Add Device"
msgstr "新增裝置"

#: loader/loader.c:1918
#, c-format
msgid "loader has already been run.  Starting shell.\n"
msgstr "已經執行載入程式。正在啟動 shell 。\n"

#: loader/loader.c:2359
#, c-format
msgid "Running anaconda %s, the %s rescue mode - please wait.\n"
msgstr "正在執行 anaconda %s，%s 救援模式 - 請稍候。\n"

#: loader/loader.c:2361
#, c-format
msgid "Running anaconda %s, the %s system installer - please wait.\n"
msgstr "正在執行 anaconda %s，%s 系統安裝程式 - 請稍候。\n"

#: loader/mediacheck.c:46
#, c-format
msgid "Unable to find install image %s"
msgstr "找不到安裝映像檔 %s"

#: loader/mediacheck.c:52
#, c-format
msgid "Checking \"%s\"."
msgstr "正在檢查「%s」。"

#: loader/mediacheck.c:54
#, c-format
msgid "Checking media."
msgstr "正在檢查媒介。"

#: loader/mediacheck.c:86
msgid ""
"Unable to read the disc checksum from the primary volume descriptor.  This "
"probably means the disc was created without adding the checksum."
msgstr ""
"無法從主卷冊描述中讀取磁碟數值。這也許表示在建立此磁碟時沒有加上檢測值資訊。"

#: loader/mediacheck.c:93
msgid ""
"The image which was just tested has errors. This could be due to a corrupt "
"download or a bad disc.  If applicable, please clean the disc and try "
"again.  If this test continues to fail you should not continue the install."
msgstr ""
"剛剛測試的影像檔的有錯誤，可能是下載檔或碟片已損壞。如果可能的話，請清潔您的"
"碟片，然後再試一次。假如這個測試再次失敗，您不應該繼續安裝。"

#: loader/mediacheck.c:101
msgid "Success"
msgstr "成功"

#: loader/mediacheck.c:102
msgid ""
"The image which was just tested was successfully verified.  It should be OK "
"to install from this media.  Note that not all media/drive errors can be "
"detected by the media check."
msgstr ""
"您方才測試的映像檔已成功驗證。您應可透過此媒介來進行安裝。請注意，並非所有媒"
"介/驅動程式錯誤都可透過媒體測試來偵測到。"

#: loader/method.c:321
#, c-format
msgid ""
"Would you like to perform a checksum test of the ISO image:\n"
"\n"
"   %s?"
msgstr ""
"您想要對 ISO 映像檔執行 Checksum 測試嗎：\n"
"\n"
"   %s？"

#: loader/method.c:324
msgid "Checksum Test"
msgstr "Checksum 測試"

#: loader/modules.c:382
#, fuzzy, c-format
msgid "Bad argument to device kickstart method command: %s"
msgstr "kickstart 方式之指令 %s 的裝置引數不正確：%s"

#: loader/modules.c:398
msgid "A module name must be specified for the kickstart device command."
msgstr "您必須為 kickstart 裝置指令指定一組模組名稱。"

#: loader/net.c:110
msgid "Invalid Prefix"
msgstr "無效的前置"

#: loader/net.c:111
msgid ""
"Prefix must be between 1 and 32 for IPv4 networks or between 1 and 128 for "
"IPv6 networks"
msgstr "前置數字必須介於 1 到 32 之間（IPv4）或介於 1 到 128 之間（IPv6）。"

#: loader/net.c:464 loader/net.c:472 loader/net.c:527
#, c-format
msgid "There was an error configuring your network interface."
msgstr "設定網路界面時發生錯誤。"

#: loader/net.c:466
#, c-format
msgid ""
"\n"
"This cannot be corrected in cmdline mode.\n"
"Halting.\n"
msgstr ""

#: loader/net.c:471 loader/net.c:526
msgid "Network Error"
msgstr "網路錯誤"

#: loader/net.c:557 textw/netconfig_text.py:133
msgid "Enable IPv4 support"
msgstr "啟用 IPv4 支援"

#: loader/net.c:571
msgid "Enable IPv6 support"
msgstr "啟用 IPv6 支援"

#: loader/net.c:611
msgid "Configure TCP/IP"
msgstr "設定 TCP/IP"

#: loader/net.c:668
msgid "Missing Protocol"
msgstr "缺少通訊協定"

#: loader/net.c:669
msgid "You must select at least one protocol (IPv4 or IPv6)."
msgstr "您必須選擇至少一項通訊協定（IPv4 或 IPv6）。"

#: loader/net.c:676
msgid "IPv4 Needed for NFS"
msgstr "NFS 需要 IPv4"

#: loader/net.c:677
msgid "NFS installation method requires IPv4 support."
msgstr "要使用 NFS 安裝，需要 IPv4 的支援。"

#: loader/net.c:776
msgid "IPv4 address:"
msgstr "IPv4 位址："

#: loader/net.c:788 loader/net.c:855 ui/netconfig.glade.h:1
msgid "/"
msgstr "/"

#: loader/net.c:843
msgid "IPv6 address:"
msgstr "IPv6 位址："

#: loader/net.c:909 textw/netconfig_text.py:160
msgid "Gateway:"
msgstr "閘道器："

#: loader/net.c:917
msgid "Name Server:"
msgstr "名稱伺服器："

#: loader/net.c:956
msgid ""
"Enter the IPv4 and/or the IPv6 address and prefix (address / prefix).  For "
"IPv4, the dotted-quad netmask or the CIDR-style prefix are acceptable. The "
"gateway and name server fields must be valid IPv4 or IPv6 addresses."
msgstr ""
"請輸入 IPv4 與/或 IPv6 位址和前置字元（位址 / 前置字元）。對於 IPv4 來說，您"
"可使用網路遮罩或是 CIDR 形式的前置字元。閘道器和名稱伺服器欄位必須是有效的 "
"IPv4 或 IPv6 位址。"

#: loader/net.c:973
msgid "Manual TCP/IP Configuration"
msgstr "手動 TCP/IP 設定"

#: loader/net.c:1097 loader/net.c:1105
msgid "Missing Information"
msgstr "資訊不足"

#: loader/net.c:1098
msgid ""
"You must enter both a valid IPv4 address and a network mask or CIDR prefix."
msgstr "您必須輸入有效的 IPv4 位址及網路遮罩或 CIDR 前置字元。"

#: loader/net.c:1106
msgid "You must enter both a valid IPv6 address and a CIDR prefix."
msgstr "您必須輸入有效的 IPv6 位址以及 CIDR 前置字元。"

#: loader/net.c:1559
#, fuzzy, c-format
msgid "Bad argument to kickstart network command: %s"
msgstr "kickstart 網路指令 %s 的引數不正確：%s"

#: loader/net.c:1580
#, c-format
msgid "Bad bootproto %s specified in network command"
msgstr "錯誤的開機網路命令 %s 設定"

#: loader/net.c:1657
msgid "Seconds:"
msgstr "秒："

#: loader/net.c:1846
msgid "Networking Device"
msgstr "網路裝置"

#: loader/net.c:1847
msgid ""
"You have multiple network devices on this system. Which would you like to "
"install through?"
msgstr "你的系統有多個網路裝置。您想要透過那一個安裝？"

#: loader/net.c:1851
msgid "Identify"
msgstr "辨識"

#: loader/net.c:1860
msgid "You can identify the physical port for"
msgstr "您可辨識實體通訊埠："

#: loader/net.c:1862
msgid ""
"by flashing the LED lights for a number of seconds.  Enter a number between "
"1 and 30 to set the duration to flash the LED port lights."
msgstr ""
"透過使 LED 燈閃爍幾秒鐘。輸入一個介於 1 與 30 之間的數字來設置 LED port "
"light 的閃爍時間。"

#: loader/net.c:1869
msgid "Identify NIC"
msgstr "辨識 NIC"

#: loader/net.c:1882
msgid "Invalid Duration"
msgstr "無效的時間"

#: loader/net.c:1883
msgid "You must enter the number of seconds as an integer between 1 and 30."
msgstr "您必須以秒數為單位，並使用介於 1 與 30 之間的整數來將時間輸入。"

#: loader/net.c:1895
#, c-format
msgid "Flashing %s port lights for %d seconds."
msgstr "閃爍 %s 連接埠燈 %d 秒。"

#: loader/net.c:2062 loader/net.c:2066
#, c-format
msgid "Waiting for NetworkManager to configure %s.\n"
msgstr "正在等候 NetworkManager 設定 %s。\n"

#: loader/nfsinstall.c:68
msgid "NFS server name:"
msgstr "NFS 伺服器名稱："

#: loader/nfsinstall.c:72
#, c-format
msgid "%s directory:"
msgstr "%s 安裝目錄："

#: loader/nfsinstall.c:76
msgid "NFS mount options (optional):"
msgstr ""

#: loader/nfsinstall.c:82
#, fuzzy, c-format
msgid ""
"Please enter the server and path to your %s installation image and "
"optionally additional NFS mount options."
msgstr "請輸入您 %s 安裝映像檔的伺服器名稱與路徑。"

#: loader/nfsinstall.c:90
msgid "NFS Setup"
msgstr "NFS 設定"

#: loader/nfsinstall.c:280
msgid "That directory could not be mounted from the server."
msgstr "無法從該伺服器掛載這個目錄。"

#: loader/nfsinstall.c:292
#, c-format
msgid "That directory does not seem to contain a %s installation image."
msgstr "該目錄並不包含一個 %s 安裝映像檔。"

#: loader/nfsinstall.c:367
#, fuzzy, c-format
msgid "Bad argument to NFS kickstart method command: %s"
msgstr "NFS kickstart 方式之指令 %s 的引數不正確：%s"

#: loader/telnetd.c:89 loader/telnetd.c:128
msgid "Telnet"
msgstr "Telnet"

#: loader/telnetd.c:89
msgid "Waiting for telnet connection."
msgstr "正在等候 telnet 連線。"

#: loader/telnetd.c:128
msgid "Running anaconda via telnet."
msgstr "正在透過 telnet 執行 anaconda。"

#: loader/urlinstall.c:138
#, fuzzy, c-format
msgid "Unable to retrieve %s."
msgstr "無法擷取 %s：//%s%s。"

#: loader/urlinstall.c:222
msgid "Unable to retrieve the install image."
msgstr "無法擷取安裝映像檔。"

#: loader/urlinstall.c:373
#, fuzzy, c-format
msgid "Bad argument to URL kickstart method command: %s"
msgstr "Url kickstart 方式之指令 %s 的引數不正確：%s"

#: loader/urlinstall.c:384
msgid "Must supply a --url argument to Url kickstart method."
msgstr "必須提供一個 --url 引數給 Url 的 kickstart 方式。"

#: loader/urlinstall.c:391
#, c-format
msgid "Unknown Url method %s"
msgstr "不明的 Url 方式 %s"

#: loader/urls.c:167 loader/urls.c:175
msgid "Retrieving"
msgstr "正在擷取資訊"

#: loader/urls.c:261
#, c-format
msgid ""
"Please enter the URL containing the %s installation image on your server."
msgstr "請輸入包含著您伺服器上的 %s 安裝映像檔的 URL。"

#: loader/urls.c:279
#, fuzzy
msgid "Enable HTTP proxy"
msgstr "啟用 IPv4 支援"

#: loader/urls.c:293
#, fuzzy
msgid "Proxy URL"
msgstr "Proxy URL 無效"

#: loader/urls.c:298
#, fuzzy
msgid "Username"
msgstr "CHAP 用戶名稱"

#: loader/urls.c:303
#, fuzzy
msgid "Password"
msgstr "密碼："

#: loader/urls.c:322
msgid "URL Setup"
msgstr "URL 設定"

#: loader/urls.c:330
msgid "You must enter a URL."
msgstr "您必須輸入 URL。"

#: loader/urls.c:336
msgid "URL must be either an ftp or http URL"
msgstr "URL 必須是 ftp 或 http 網址"

#: loader/windows.c:65
msgid "Loading SCSI driver"
msgstr "正在載入 SCSI 驅動程式"

#: loader/windows.c:66
#, c-format
msgid "Loading %s driver"
msgstr "正在載入 %s 驅動程式。"

#: storage/__init__.py:96
msgid "Unknown Device"
msgstr "不明的裝置"

#: storage/__init__.py:97
#, python-format
msgid ""
"The installation source given by device %s could not be found.  Please check "
"your parameters and try again."
msgstr "找不到裝置 %s 所提供的安裝媒介。請檢查您的參數並重新嘗試。"

#: storage/__init__.py:106
#, fuzzy
msgid "No disks found"
msgstr "找不到驅動程式"

#: storage/__init__.py:107
msgid "No usable disks have been found."
msgstr ""

#: storage/__init__.py:118
msgid "Installation cannot continue."
msgstr "安裝無法繼續。"

#: storage/__init__.py:119
msgid ""
"The storage configuration you have chosen has already been activated. You "
"can no longer return to the disk editing screen. Would you like to continue "
"with the installation process?"
msgstr ""
"您所選擇的儲存裝置設定已經啟用了。您無法再回到磁碟編輯畫面。您想要繼續進行安"
"裝程序嗎？"

#: storage/__init__.py:147
msgid "Encrypt device?"
msgstr "為裝置加密？"

#: storage/__init__.py:148
msgid ""
"You specified block device encryption should be enabled, but you have not "
"supplied a passphrase. If you do not go back and provide a passphrase, block "
"device encryption will be disabled."
msgstr ""
"您指定啟用了區塊裝置加密，不過您並未提供一組密碼。若您不退回上一步並提供密碼"
"的話，區塊裝置加密將會被停用。"

#: storage/__init__.py:171
msgid "Writing storage configuration to disk"
msgstr "將儲存裝置設定寫至磁碟"

#: storage/__init__.py:172
msgid ""
"The partitioning options you have selected will now be written to disk.  Any "
"data on deleted or reformatted partitions will be lost."
msgstr ""
"您所選擇的磁碟分割選項現在將被寫入磁碟中。任何位於即將被刪除或是格式化分割區"
"上的資料都將會流失。"

#: storage/__init__.py:177
msgid "Go _back"
msgstr "上一步(_b)"

#: storage/__init__.py:178
msgid "_Write changes to disk"
msgstr "將變更寫至磁碟(_W)"

#: storage/__init__.py:197
msgid "Running..."
msgstr "正在執行中..."

#: storage/__init__.py:198
msgid "Storing encryption keys"
msgstr "正在儲存加密金鑰"

#: storage/__init__.py:214
#, python-format
msgid "Error storing an encryption key: %s\n"
msgstr "儲存加密金鑰時發生了錯誤：%s\n"

#: storage/__init__.py:357
msgid "Finding Devices"
msgstr "尋找裝置"

#: storage/__init__.py:358
msgid "Finding storage devices"
msgstr "正在尋找儲存裝置"

#: storage/__init__.py:637
msgid "This partition is holding the data for the hard drive install."
msgstr "此分割區包含了硬碟安裝時要用到的資料。"

#: storage/__init__.py:642
msgid "You cannot delete a partition of a LDL formatted DASD."
msgstr "您無法刪除 LDL 格式化的 DASD 的分割區。"

#: storage/__init__.py:648
#, python-format
msgid "This device is part of the RAID device %s."
msgstr "此裝置為 RAID 裝置 %s 的一部份。"

#: storage/__init__.py:651
msgid "This device is part of a RAID device."
msgstr "此裝置為 RAID 裝置的一部份。"

#: storage/__init__.py:656
#, python-format
msgid "This device is part of the LVM volume group '%s'."
msgstr "此裝置為 LVM 卷冊群組「%s」的一部份。"

#: storage/__init__.py:659
msgid "This device is part of a LVM volume group."
msgstr "此裝置為 LVM 卷冊群組的一部份。"

#: storage/__init__.py:675
msgid ""
"This device is an extended partition which contains logical partitions that "
"cannot be deleted:\n"
"\n"
msgstr ""
"此裝置是個延伸的分割區，它包含了無法刪除的邏輯分割區：\n"
"\n"

#: storage/__init__.py:951
#, python-format
msgid ""
"You have not defined a root partition (/), which is required for "
"installation of %s to continue."
msgstr "您還沒指定 root 分割區（/），為了讓 %s 安裝程式繼續，您必須先指定。"

#: storage/__init__.py:956
#, python-format
msgid ""
"Your root partition is less than 250 megabytes which is usually too small to "
"install %s."
msgstr "您的 root 分割區小於 250 MB，空間太小不足以安裝 %s。"

#: storage/__init__.py:962
#, fuzzy, python-format
msgid ""
"Your / partition is less than %(min)s MB which is lower than recommended for "
"a normal %(productName)s install."
msgstr "你的 / 分割區小於 %s MB，這低於正常的 %s 安裝的建議值。"

#: storage/__init__.py:972
#, python-format
msgid ""
"Your / partition does not match the the live image you are installing from.  "
"It must be formatted as %s."
msgstr "您的 / 分割區和您正要從其進行安裝的即時映像不符。它必須被格式化為 %s。"

#: storage/__init__.py:979
#, fuzzy, python-format
msgid ""
"Your %(mount)s partition is less than %(size)s megabytes which is lower than "
"recommended for a normal %(productName)s install."
msgstr "你的 %s 分割區小於 %s MB，這比正常安裝 %s 的建議值還要小。"

#: storage/__init__.py:1008
msgid ""
"Installing on a USB device.  This may or may not produce a working system."
msgstr "安裝至 USB 裝置上。安裝後的系統可能會、也可能不會正常運作。"

#: storage/__init__.py:1011
msgid ""
"Installing on a FireWire device.  This may or may not produce a working "
"system."
msgstr "安裝至火線（Firewire）裝置上。安裝後的系統可能會、也可能不會正常運作。"

#: storage/__init__.py:1018
msgid ""
"You have not specified a swap partition.  Due to the amount of memory "
"present, a swap partition is required to complete installation."
msgstr ""
"您尚未指定 swap 分割區。根據所擁有的記憶體，您必須建立一個 swap 分割區才可完"
"成安裝程序。"

#: storage/__init__.py:1023
msgid ""
"You have not specified a swap partition.  Although not strictly required in "
"all cases, it will significantly improve performance for most installations."
msgstr ""
"您尚未指定 swap 分割區。雖然並沒有強制規定一定要有，但有的話對安裝效率會有很"
"大的改善。"

#: storage/__init__.py:1030
#, python-format
msgid ""
"This mount point is invalid.  The %s directory must be on the / file system."
msgstr "此掛載點無效。%s 目錄必須位於 / 檔案系統上。"

#: storage/__init__.py:1034
#, python-format
msgid "The mount point %s must be on a linux file system."
msgstr "掛載點「%s」必須位於一個 Linux 檔案系統上。"

#: storage/__init__.py:1045
msgid "No Drives Found"
msgstr "找不到磁碟機"

#: storage/__init__.py:1046
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"file systems. Please check your hardware for the cause of this problem."
msgstr ""
"發生錯誤 - 找不到可用來建立新檔案系統的磁碟機。請檢查您的硬體以找出問題發生的"
"原因。"

#: storage/__init__.py:1337 storage/__init__.py:1346
msgid "Dirty File Systems"
msgstr "未經正常程序關機（Dirty）的檔案系統"

#: storage/__init__.py:1338
#, python-format
msgid ""
"The following file systems for your Linux system were not unmounted "
"cleanly.  Please boot your Linux installation, let the file systems be "
"checked and shut down cleanly to upgrade.\n"
"%s"
msgstr ""
"在你的 Linux 系統上有下列的檔案系統沒有完整的卸載。請重新開機繼續安裝程式，並"
"且讓安裝程式自動檢查檔案系統，再來正常關機以進行系統升級。\n"
"%s"

#: storage/__init__.py:1347
#, python-format
msgid ""
"The following file systems for your Linux system were not unmounted "
"cleanly.  Would you like to mount them anyway?\n"
"%s"
msgstr ""
"在你的 Linux 系統上有下列的檔案系統沒有完整的卸載。您還是想要掛載它們嗎？\n"
"%s"

#: storage/__init__.py:1824
#, python-format
msgid ""
"The swap device:\n"
"\n"
"     %s\n"
"\n"
"is an old-style Linux swap partition.  If you want to use this device for "
"swap space, you must reformat as a new-style Linux swap partition."
msgstr ""
"Swap 裝置：\n"
"\n"
"     %s\n"
"\n"
"是個老式的 Linux swap 分割區。若您希望使用此裝置來作為 swap 空間的話，您必須"
"將其重新格式化為新式的 Linux swap 分割區。"

#: storage/__init__.py:1835
#, python-format
msgid ""
"The swap device:\n"
"\n"
"     %s\n"
"\n"
"in your /etc/fstab file is currently in use as a software suspend device, "
"which means your system is hibernating. To perform an upgrade, please shut "
"down your system rather than hibernating it."
msgstr ""
"Swap 裝置：\n"
"\n"
"     %s\n"
"\n"
"這個在您 /etc/fstab 檔案中的裝置目前正被使用來作為軟體中止裝置，這表示您的系"
"統正在休眠中。若要進行升級，請關閉您的系統，而不是使其處於休眠狀態中。"

#: storage/__init__.py:1843
#, python-format
msgid ""
"The swap device:\n"
"\n"
"     %s\n"
"\n"
"in your /etc/fstab file is currently in use as a software suspend device, "
"which means your system is hibernating. If you are performing a new install, "
"make sure the installer is set to format all swap devices."
msgstr ""
"Swap 裝置：\n"
"\n"
"     %s\n"
"\n"
"這個在您 /etc/fstab 檔案中的裝置目前正被使用來作為軟體中止裝置，這表示您的系"
"統正在休眠中。若您正要進行全新的安裝，請確認安裝程式已被設為會將所有 swap 裝"
"置格式化。"

#: storage/__init__.py:1855
#, fuzzy, python-format
msgid ""
"The swap device:\n"
"\n"
"     %s\n"
"\n"
"does not contain a supported swap volume.  In order to continue "
"installation, you will need to format the device or skip it."
msgstr ""
"Swap 裝置：\n"
"\n"
"     %s\n"
"\n"
"不包含受支援的 swap 卷測。若要繼續進行安裝，您將需要格式化裝置或跳過。"

#: storage/__init__.py:1866
#, fuzzy, python-format
msgid ""
"Error enabling swap device %(name)s: %(msg)s\n"
"\n"
"The /etc/fstab on your upgrade partition does not reference a valid swap "
"device.\n"
"\n"
"Press OK to exit the installer"
msgstr ""
"啟動 swap 裝置 %s 時發生了錯誤：%s\n"
"\n"
"您升級分割區上的 /etc/fstab 並沒有參照可用的 swap 裝置。\n"
"\n"
"請按下「確定」來退出安裝程式。"

#: storage/__init__.py:1873
#, fuzzy, python-format
msgid ""
"Error enabling swap device %(name)s: %(msg)s\n"
"\n"
"This most likely means this swap device has not been initialized.\n"
"\n"
"Press OK to exit the installer."
msgstr ""
"啟動 swap 裝置 %s 時發生了錯誤：%s\n"
"\n"
"很有可能是因為此 swap 裝置尚未被初始化。\n"
"\n"
"請按下「確定」來退出安裝程式。"

#: storage/__init__.py:1936 storage/__init__.py:1948
msgid "Invalid mount point"
msgstr "無效的掛載點"

#: storage/__init__.py:1937
#, python-format
msgid ""
"An error occurred when trying to create %s.  Some element of this path is "
"not a directory. This is a fatal error and the install cannot continue.\n"
"\n"
"Press <Enter> to exit the installer."
msgstr ""
"嘗試建立 %s 時發生錯誤。這個路徑的一些元素並不是目錄。這是個嚴重錯誤，安裝無"
"法繼續。\n"
"\n"
"請按下 <Enter> 鍵來退出安裝程式。"

#: storage/__init__.py:1949
#, fuzzy, python-format
msgid ""
"An error occurred when trying to create %(mountpoint)s: %(msg)s.  This is a "
"fatal error and the install cannot continue.\n"
"\n"
"Press <Enter> to exit the installer."
msgstr ""
"嘗試建立 %s 時發生錯誤：%s。這是個嚴重錯誤，安裝無法繼續。\n"
"\n"
"請按下 <Enter> 鍵來退出安裝程式。"

#: storage/__init__.py:1965 storage/__init__.py:1989
msgid "Unable to mount filesystem"
msgstr "無法掛載檔案系統"

#: storage/__init__.py:1966
#, fuzzy, python-format
msgid ""
"An error occurred mounting device %(path)s as %(mountpoint)s.  You may "
"continue installation, but there may be problems."
msgstr "將裝置 %s 掛載為 %s 時發生錯誤。您可以繼續安裝，但可能會產生一些問題。"

#: storage/__init__.py:1990
#, fuzzy, python-format
msgid ""
"An error occurred mounting device %(path)s as %(mountpoint)s: %(msg)s. This "
"is a fatal error and the install cannot continue.\n"
"\n"
"Press <Enter> to exit the installer."
msgstr ""
"將裝置 %s 掛載為 %s 的時候發生了錯誤：%s。這是項嚴重錯誤，安裝程序無法繼續進"
"行。\n"
"\n"
"請按下 <Enter> 鍵來退出安裝程式。"

#: storage/devicelibs/lvm.py:317
#, python-format
msgid "vginfo failed for %s"
msgstr "%s 的 vginfo 已失敗"

#: storage/devicelibs/lvm.py:346
#, python-format
msgid "lvs failed for %s"
msgstr "%s 的 lvs 已失敗"

#: storage/devices.py:1258 storage/devices.py:1926 storage/devices.py:2329
#: storage/devices.py:2800 storage/devices.py:3282
#, fuzzy
msgid "Creating"
msgstr "克羅地亞語"

#: storage/devices.py:1259 storage/devices.py:1927 storage/devices.py:2330
#: storage/devices.py:2801
#, fuzzy, python-format
msgid "Creating device %s"
msgstr "改變裝置(_C)"

#: storage/devices.py:2423
#, python-format
msgid "A RAID%d set requires atleast %d members"
msgstr ""

#: storage/devices.py:3283
#, fuzzy, python-format
msgid "Creating file %s"
msgstr "正在 %s 上建立檔案系統"

#: storage/devicetree.py:98
msgid "Confirm"
msgstr "確認"

#: storage/devicetree.py:99
#, python-format
msgid ""
"Are you sure you want to skip entering a passphrase for device %s?\n"
"\n"
"If you skip this step the device's contents will not be available during "
"installation."
msgstr ""
"您確定您希望跳過為 %s 裝置輸入密碼的步驟嗎？\n"
"\n"
"若您跳過此步驟，裝置的內容在安裝時將無法使用。"

#: storage/devicetree.py:1863 storage/devicetree.py:1911
msgid "This partition is part of an inconsistent LVM Volume Group."
msgstr "此分割區為不一致的 LVM 卷冊群組的一部份。"

#: storage/formats/fs.py:102
msgid "filesystem configuration missing a type"
msgstr "檔案系統設定缺少了類型"

#: storage/formats/fs.py:354 storage/formats/luks.py:194
#: storage/formats/lvmpv.py:103 storage/formats/swap.py:161
msgid "Formatting"
msgstr "正在格式化"

#: storage/formats/fs.py:355
#, fuzzy, python-format
msgid "Creating %s filesystem on %s"
msgstr "正在 %s 上建立檔案系統"

#: storage/formats/fs.py:463
msgid "Resizing"
msgstr "重設大小"

#: storage/formats/fs.py:464
#, python-format
msgid "Resizing filesystem on %s"
msgstr "正在重設 %s 上的檔案系統大小"

#: storage/formats/fs.py:499
#, fuzzy, python-format
msgid "Unknown return code: %d."
msgstr "不明的 Url 方式 %s"

#: storage/formats/fs.py:513
msgid "Checking"
msgstr "正在檢查"

#: storage/formats/fs.py:514
#, python-format
msgid "Checking filesystem on %s"
msgstr "正在檢查 %s 上的檔案系統"

#: storage/formats/fs.py:531
#, python-format
msgid "%(type)s filesystem check failure on %(device)s: "
msgstr ""

#: storage/formats/fs.py:537
msgid ""
"Errors like this usually mean there is a problem with the filesystem that "
"will require user interaction to repair.  Before restarting installation, "
"reboot to rescue mode or another system that allows you to repair the "
"filesystem interactively.  Restart installation after you have corrected the "
"problems on the filesystem."
msgstr ""

#: storage/formats/fs.py:545 storage/partitioning.py:275
msgid "Unrecoverable Error"
msgstr "無法復原的錯誤"

#: storage/formats/fs.py:871
msgid "File system errors left uncorrected."
msgstr ""

#: storage/formats/fs.py:872
msgid "Operational error."
msgstr ""

#: storage/formats/fs.py:873
msgid "Usage or syntax error."
msgstr ""

#: storage/formats/fs.py:874
msgid "e2fsck cancelled by user request."
msgstr ""

#: storage/formats/fs.py:875
msgid "Shared library error."
msgstr ""

#: storage/formats/fs.py:1034
msgid ""
"Recoverable errors have been detected or dosfsck has discovered an internal "
"inconsistency."
msgstr ""

#: storage/formats/fs.py:1036
#, fuzzy
msgid "Usage error."
msgstr "目標磁碟錯誤"

#: storage/formats/luks.py:48
#, fuzzy
msgid "Encrypted"
msgstr "加密(_E)"

#: storage/formats/luks.py:195
#, fuzzy, python-format
msgid "Encrypting %s"
msgstr "加密(_E)"

#: storage/formats/lvmpv.py:104 storage/formats/swap.py:162
#, fuzzy, python-format
msgid "Creating %s on %s"
msgstr "正在 %s 上建立檔案系統"

#: storage/dasd.py:120
msgid "Unformatted DASD Device Found"
msgid_plural "Unformatted DASD Devices Found"
msgstr[0] ""
msgstr[1] ""

#: storage/dasd.py:122
#, python-format
msgid ""
"Format uninitialized DASD device?\n"
"\n"
"There is %d uninitialized DASD device on this system.  To continue "
"installation, the device must be formatted.  Formatting will remove any data "
"on this device."
msgid_plural ""
"Format uninitialized DASD devices?\n"
"\n"
"There are %d uninitialized DASD devices on this system.  To continue "
"installation, the devices must be formatted.  Formatting will remove any "
"data on these devices."
msgstr[0] ""
msgstr[1] ""

#: storage/dasd.py:151
#, fuzzy
msgid "Formatting DASD Device"
msgid_plural "Formatting DASD Devices"
msgstr[0] "格式化失敗"
msgstr[1] "格式化失敗"

#: storage/dasd.py:152
#, python-format
msgid "Preparing %d DASD device for use with Linux..."
msgid_plural "Preparing %d DASD devices for use with Linux..."
msgstr[0] ""
msgstr[1] ""

#: storage/fcoe.py:66 storage/fcoe.py:67
msgid "Connecting to FCoE SAN"
msgstr ""

#: storage/fcoe.py:106
#, fuzzy
msgid "FCoE not available"
msgstr "iSCSI 無法使用"

#: storage/iscsi.py:83 storage/iscsi.py:84
msgid "Scanning iSCSI nodes"
msgstr "正在掃描 iSCSI 節點"

#: storage/iscsi.py:176 storage/iscsi.py:177
msgid "Initializing iSCSI initiator"
msgstr "正在初始化 iSCSI initiator"

#: storage/iscsi.py:213
msgid "iSCSI not available"
msgstr "iSCSI 無法使用"

#: storage/iscsi.py:215
msgid "No initiator name set"
msgstr "未設置起始名稱"

#: storage/iscsi.py:229
msgid "No iSCSI nodes discovered"
msgstr "沒有發現 iSCSI 節點"

#: storage/iscsi.py:232 storage/iscsi.py:233
msgid "Logging in to iSCSI nodes"
msgstr "登入 iSCSI 節點"

#: storage/iscsi.py:258
msgid "No new iSCSI nodes discovered"
msgstr "沒有找到新的 iSCSI 節點"

#: storage/iscsi.py:261
msgid "Could not log in to any of the discovered nodes"
msgstr "無法登入至任何發現的節點中"

#: storage/partitioning.py:190
msgid ""
"Could not find enough free space for automatic partitioning.  Press 'OK' to "
"exit the installer."
msgstr "找不到足夠空間以用來進行自動分割，請按下「確定」來退出安裝程式。"

#: storage/partitioning.py:193
msgid ""
"Could not find enough free space for automatic partitioning, please use "
"another partitioning method."
msgstr "找不到可用於自動分割的足夠空間，請使用另一種分割方式。"

#: storage/partitioning.py:222
msgid "Warnings During Automatic Partitioning"
msgstr "自動分割磁碟時的警告"

#: storage/partitioning.py:224
#, python-format
msgid ""
"Following warnings occurred during automatic partitioning:\n"
"\n"
"%s"
msgstr ""
"自動分割時發生下列錯誤：\n"
"\n"
"%s"

#: storage/partitioning.py:238 storage/partitioning.py:259
msgid ""
"\n"
"\n"
"Press 'OK' to exit the installer."
msgstr ""
"\n"
"\n"
"請按下「確定」來退出安裝程式。"

#: storage/partitioning.py:240
#, fuzzy, python-format
msgid ""
"Could not allocate requested partitions: \n"
"\n"
"%(msg)s.%(extra)s"
msgstr ""
"無法配置要求的分割區：\n"
"\n"
"%s.%s"

#: storage/partitioning.py:261
msgid ""
"\n"
"\n"
"Press 'OK' to choose a different partitioning option."
msgstr ""
"\n"
"\n"
"請按下「確定」，選擇不同的分割區選項。"

#: storage/partitioning.py:263
msgid "Automatic Partitioning Errors"
msgstr "自動分割磁碟發生錯誤"

#: storage/partitioning.py:264
#, fuzzy, python-format
msgid ""
"The following errors occurred with your partitioning:\n"
"\n"
"%(errortxt)s\n"
"\n"
"This can happen if there is not enough space on your hard drive(s) for the "
"installation. %(extra)s"
msgstr ""
"您的磁碟分割發生下列錯誤：\n"
"\n"
"%s\n"
"\n"
"這有可能是因為您硬碟上的剩餘空間不足以讓安裝程式使用。%s"

#: storage/zfcp.py:50
msgid "You have not specified a device number or the number is invalid"
msgstr "您尚未指定裝置號碼，或該號碼不正確。"

#: storage/zfcp.py:52
msgid "You have not specified a worldwide port name or the name is invalid."
msgstr "您尚未指定 worldwide 連接埠名稱，或該名稱無效。"

#: storage/zfcp.py:54
msgid "You have not specified a FCP LUN or the number is invalid."
msgstr "您尚未指定 FCP LUN，或該號碼無效"

#: storage/zfcp.py:131
#, fuzzy, python-format
msgid "Could not free zFCP device %(devnum)s from device ignore list (%(e)s)."
msgstr "無法將 zFCP 裝置 %s 由裝置忽略清單（%s）中釋放。"

#: storage/zfcp.py:137
#, python-format
msgid "zFCP device %s not found, not even in device ignore list."
msgstr "找不到 zFCP 裝置 %s，甚至在裝置忽略清單中也找不到。"

#: storage/zfcp.py:149
#, fuzzy, python-format
msgid "Could not set zFCP device %(devnum)s online (%(e)s)."
msgstr "無法將 zFCP 裝置 %s 設為 online（%s）"

#: storage/zfcp.py:160
#, fuzzy, python-format
msgid "Could not add WWPN %(wwpn)s to zFCP device %(devnum)s (%(e)s)."
msgstr "無法新增 WWPN %s 至 zFCP 裝置 %s（%s）。"

#: storage/zfcp.py:167
#, fuzzy, python-format
msgid "WWPN %(wwpn)s not found at zFCP device %(devnum)s."
msgstr "在 zFCP 裝置 %s 上找不到 WWPN %s。"

#: storage/zfcp.py:182
#, fuzzy, python-format
msgid ""
"Could not add LUN %(fcplun)s to WWPN %(wwpn)s on zFCP device %(devnum)s (%(e)"
"s)."
msgstr "無法新增 LUN %s 至 zFCP 裝置 %s（%s）上的 WWPN %s。"

#: storage/zfcp.py:188
#, fuzzy, python-format
msgid ""
"LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s already configured."
msgstr "已設定了位於 zFCP 裝置 %s 上的 WWPN %s 的 LUN %s。"

#: storage/zfcp.py:200
#, fuzzy, python-format
msgid ""
"Could not read failed attribute of LUN %(fcplun)s at WWPN %(wwpn)s on zFCP "
"device %(devnum)s (%(e)s)."
msgstr "無法讀取位於 zFCP 裝置 %s（%s）上的 WWPN %s 的錯誤 LUN %s 屬性。"

#: storage/zfcp.py:209
#, fuzzy, python-format
msgid ""
"Failed LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s removed "
"again."
msgstr "再次移除了位於 zFCP 裝置 %s 上的 WWPN %s 的錯誤 LUN %s。"

#: storage/zfcp.py:266
#, fuzzy, python-format
msgid ""
"Could not correctly delete SCSI device of zFCP %(devnum)s %(wwpn)s %(fcplun)"
"s (%(e)s)."
msgstr "無法正確地刪除 zFCP %s %s %s（%s）的 SCSI 裝置。"

#: storage/zfcp.py:275
#, fuzzy, python-format
msgid ""
"Could not remove LUN %(fcplun)s at WWPN %(wwpn)s on zFCP device %(devnum)s (%"
"(e)s)."
msgstr "無法移除位於 zFCP 裝置 %s（%s）上的 WWPN %s 的 LUN %s。"

#: storage/zfcp.py:293
#, fuzzy, python-format
msgid "Could not remove WWPN %(wwpn)s on zFCP device %(devnum)s (%(e)s)."
msgstr "無法移除 zFCP 裝置 %s（%s）上的 WWPN %s。"

#: storage/zfcp.py:319
#, fuzzy, python-format
msgid "Could not set zFCP device %(devnum)s offline (%(e)s)."
msgstr "無法將 zFCP 裝置 %s 設為離線（%s）。"

#: textw/complete_text.py:32
msgid "Reboot"
msgstr "重新開機"

#: textw/complete_text.py:34
msgid "<Enter> to exit"
msgstr "按 <Enter> 鍵離開"

#: textw/complete_text.py:62
msgid "Complete"
msgstr "安裝完成"

#: textw/keyboard_text.py:48
msgid "Keyboard Selection"
msgstr "選擇鍵盤"

#: textw/keyboard_text.py:49
msgid "Which model keyboard is attached to this computer?"
msgstr "您使用的是那一種鍵盤？"

#: textw/netconfig_text.py:43
#, python-format
msgid "A value is required for the field %s"
msgstr "欄位「%s」需要一個數值。"

#: textw/netconfig_text.py:88 ui/netconfig.glade.h:9
msgid "Enable network interface"
msgstr "啟用網路界面"

#: textw/netconfig_text.py:91 ui/netconfig.glade.h:10
msgid ""
"This requires that you have an active network connection during the "
"installation process.  Please configure a network interface."
msgstr "在安裝過程中，您需要可用的網路連線。請設定網路介面。"

#: textw/netconfig_text.py:130
msgid "Use dynamic IP configuration (DHCP)"
msgstr "使用動態 IP 設定（DHCP）"

#: textw/netconfig_text.py:140
msgid "IPv4 Address:"
msgstr "IPv4 位址："

#: textw/netconfig_text.py:163
msgid "Nameserver:"
msgstr "名稱伺服器："

#: textw/netconfig_text.py:193
msgid "Missing Device"
msgstr "裝置遺失"

#: textw/netconfig_text.py:194
msgid "You must select a network device"
msgstr "您必須選擇網路裝置"

#: textw/netconfig_text.py:253
msgid "IPv4 Network Mask "
msgstr "IPv4 網路遮罩"

#: textw/netconfig_text.py:276
msgid "Configuring Network Interfaces"
msgstr "設定網路介面"

#: textw/netconfig_text.py:276
msgid "Waiting for NetworkManager"
msgstr "正在等候 NetworkManager"

#: textw/netconfig_text.py:282
msgid "Error configuring network device"
msgstr "設定網路裝置時發生錯誤"

#: textw/netconfig_text.py:282
#, python-format
msgid "Error configuring network device %s"
msgstr "設定網路裝置 %s 時發生錯誤"

#: textw/partition_text.py:58
msgid "Partitioning Type"
msgstr "分割類型"

#: textw/partition_text.py:60
msgid ""
"Installation requires partitioning of your hard drive.  The default layout "
"is suitable for most users.  Select what space to use and which drives to "
"use as the install target."
msgstr ""
"安裝過程需要分割您的硬碟。預設分割格式適用於大部份的使用者。請選擇欲使用的空"
"間和作為安裝目標的磁碟。"

#: textw/partition_text.py:63
msgid "Use entire drive"
msgstr "使用整個磁碟"

#: textw/partition_text.py:64
msgid "Replace existing Linux system"
msgstr "替換掉現有的 Linux 系統"

#: textw/partition_text.py:65
msgid "Use free space"
msgstr "使用可用空間"

#: textw/partition_text.py:80
msgid "Which drive(s) do you want to use for this installation?"
msgstr "您想安裝程序使用哪些磁碟機？"

#: textw/partition_text.py:95
msgid "<Space>,<+>,<-> selection   |   <F2> Add drive   |   <F12> next screen"
msgstr "<Space>,<+>,<-> 選擇   |   <F2> 群組細節   |   <F12> 下一個畫面"

#: textw/partition_text.py:173 ui/adddrive.glade.h:4
msgid "Advanced Storage Options"
msgstr "進階儲存選項"

#: textw/partition_text.py:174 ui/adddrive.glade.h:5
msgid "How would you like to modify your drive configuration?"
msgstr "您要如何修改您的磁碟設定？"

#: textw/partition_text.py:203
msgid "Add FCP Device"
msgstr "新增 FCP 裝置"

#: textw/partition_text.py:204 ui/zfcp-config.glade.h:5
msgid ""
"zSeries machines can access industry-standard SCSI devices via Fibre Channel "
"(FCP). You need to provide a 16 bit device number, a 64 bit World Wide Port "
"Name (WWPN), and a 64 bit FCP LUN for each device."
msgstr ""
"zSeries 的電腦可以透過光纖通道（FCP，Fibre Channel）來存取符合業界標準的 "
"SCSI 裝置。您需要為每個裝置設定五個參數：16 位元的裝置號碼、64 位元的 World "
"Wide Port Number（WWPN），以及 16 位元的 FCP LUN。"

#: textw/partition_text.py:228
msgid "No network cards present."
msgstr ""

#: textw/partition_text.py:231
msgid "Add FCoE SAN"
msgstr "新增 FCoE SAN"

#: textw/partition_text.py:235
msgid "Select which NIC is connected to the FCoE SAN."
msgstr ""

#: textw/partition_text.py:251 ui/fcoe-config.glade.h:5
msgid "Use DCB"
msgstr ""

#: textw/partition_text.py:280 ui/iscsi-config.glade.h:7
msgid "Configure iSCSI Parameters"
msgstr "設定 iSCSI 參數"

#: textw/partition_text.py:281 ui/iscsi-config.glade.h:8
msgid ""
"To use iSCSI disks, you must provide the address of your iSCSI target and "
"the iSCSI initiator name you've configured for your host."
msgstr ""
"要使用 iSCSI 磁碟機，您必須提供已經為您的主機設定好的 iSCSI 目標位址與 iSCSI "
"起始名稱。"

#: textw/partition_text.py:282
msgid "Target IP Address"
msgstr "目的地 IP 位址"

#: textw/partition_text.py:283
msgid "iSCSI Initiator Name"
msgstr "iSCSI 起始名稱"

#: textw/partition_text.py:284
msgid "CHAP username"
msgstr "CHAP 用戶名稱"

#: textw/partition_text.py:285
msgid "CHAP password"
msgstr "CHAP 密碼"

#: textw/partition_text.py:286
msgid "Reverse CHAP username"
msgstr "反向的 CHAP 用戶名稱"

#: textw/partition_text.py:287
msgid "Reverse CHAP password"
msgstr "反向的 CHAP 密碼"

#: textw/progress_text.py:46
msgid "Package Installation"
msgstr "安裝套件"

#: textw/timezone_text.py:74
msgid "In which time zone are you located?"
msgstr "您位於那一個時區？"

#: textw/timezone_text.py:92
msgid "System clock uses UTC"
msgstr "系統時鐘使用 UTC"

#: textw/upgrade_bootloader_text.py:116 textw/upgrade_bootloader_text.py:126
msgid "Update boot loader configuration"
msgstr "更新開機管理程式設定"

#: textw/upgrade_bootloader_text.py:129
msgid "Skip boot loader updating"
msgstr "略過更新開機管理程式"

#: textw/upgrade_bootloader_text.py:131
msgid "Create new boot loader configuration"
msgstr "建立新的開機管理程式設定"

#: textw/upgrade_text.py:125
msgid "Free Space"
msgstr "剩餘空間"

#: textw/upgrade_text.py:143
msgid "RAM detected (MB):"
msgstr "偵測到的記憶體（MB）："

#: textw/upgrade_text.py:146
msgid "Suggested size (MB):"
msgstr "建議大小（MB）："

#: textw/upgrade_text.py:149
msgid "Swap file size (MB):"
msgstr "Swap 檔案大小（MB）："

#: textw/upgrade_text.py:157
msgid "Add Swap"
msgstr "新增 swap 分割區"

#: textw/upgrade_text.py:182
msgid "The value you entered is not a valid number."
msgstr "您必須輸入一個有效數字。"

#: textw/upgrade_text.py:214
msgid "Reinstall System"
msgstr "重新安裝系統"

#: textw/upgrade_text.py:226
msgid "System to Upgrade"
msgstr "要升級的系統"

#: textw/upgrade_text.py:227
msgid ""
"There seem to be one or more existing Linux installations on your system.\n"
"\n"
"Please choose one to upgrade, or select 'Reinstall System' to freshly "
"install your system."
msgstr ""
"在您的系統上找到一個或更多舊的 Linux 安裝。\n"
"\n"
"請選擇一個來做升級，或選擇「重新安裝系統」來完整安裝您的系統。"

#: textw/userauth_text.py:30
msgid "Root Password"
msgstr "Root 密碼"

#: textw/userauth_text.py:33
msgid ""
"Pick a root password. You must type it twice to ensure you know it and do "
"not make a typing mistake. "
msgstr "輸入 root 密碼。您必須輸入兩次以做確認。"

#: textw/userauth_text.py:67
msgid "The root password must be at least 6 characters long."
msgstr "root 密碼不得少於六個字元。"

#: textw/userauth_text.py:84
#, python-format
msgid ""
"You have provided a weak password: %s\n"
"\n"
"Would you like to continue with this password?"
msgstr ""
"您提供了一組安全性較弱的密碼：%s\n"
"\n"
"您是否希望繼續使用這組密碼？"

#: textw/welcome_text.py:29
#, python-format
msgid "%s"
msgstr "%s"

#: textw/welcome_text.py:30
#, python-format
msgid ""
"Welcome to %s!\n"
"\n"
msgstr ""
"歡迎使用 %s!\n"
"\n"

#: textw/zipl_text.py:36
msgid ""
"The z/IPL Boot Loader will be installed on your system after installation is "
"complete. You can now enter any additional kernel and chandev parameters "
"which your machine or your setup require."
msgstr ""
"在完成安裝後，z/IPL 開機載入程式將會被安裝在您的系統上。現在您可以輸入您的機"
"器或設定所需的任何其他核心或 chandev 參數。"

#: textw/zipl_text.py:68
msgid "z/IPL Configuration"
msgstr "z/IPL 設定"

#: textw/zipl_text.py:76 textw/zipl_text.py:80
msgid "Chandev line "
msgstr "Chandev line"

#: liveinst/liveinst.desktop.in.h:1
msgid "Install"
msgstr "安裝"

#: liveinst/liveinst.desktop.in.h:2
msgid "Install the live CD to your hard disk"
msgstr "將即時 CD 安裝至您的硬碟上"

#: liveinst/liveinst.desktop.in.h:3
msgid "Install to Hard Drive"
msgstr "安裝至硬碟"

#: ui/GroupSelector.glade.h:1
msgid ""
"Some packages associated with this group are not required to be installed "
"but may provide additional functionality.  Please choose the packages which "
"you would like to have installed."
msgstr ""
"有些和此群組相聯的套件無須被安裝不過可能能夠提供額外的功能。請選擇您希望安裝"
"的套件。"

#: ui/GroupSelector.glade.h:2
msgid "_Deselect"
msgstr "反選(_D)"

#: ui/GroupSelector.glade.h:3
msgid "_Deselect all optional packages"
msgstr "反選所有可選的套件(_D)"

#: ui/GroupSelector.glade.h:4
msgid "_Optional packages"
msgstr "可選套件(_O)"

#: ui/GroupSelector.glade.h:5
msgid "_Select"
msgstr "選擇(_S)"

#: ui/GroupSelector.glade.h:6
msgid "_Select all optional packages"
msgstr "選擇所有可選套件(_S)"

#: ui/GroupSelector.glade.h:7
msgid "dialog1"
msgstr "dialog1"

#: ui/account.glade.h:1
msgid "Confirm:"
msgstr "密碼確認："

#: ui/account.glade.h:2
msgid "Root Password:"
msgstr "Root 密碼："

#: ui/account.glade.h:3
msgid ""
"The root account is used for administering the system.  Enter a password for "
"the root user."
msgstr "root 是系統管理專用的帳號。請為 root 使用者輸入密碼。"

#: ui/adddrive.glade.h:1
msgid "Add _FCoE SAN"
msgstr "新增 FCoE SAN(_F)"

#: ui/adddrive.glade.h:2
msgid "Add _ZFCP LUN"
msgstr "新增 ZFCP LUN(_Z)"

#: ui/adddrive.glade.h:3
msgid "Add _iSCSI target"
msgstr "新增 iSCSI 目標(_i)"

#: ui/adddrive.glade.h:6
msgid "_Add drive"
msgstr "新增硬碟(_A)"

#: ui/addrepo.glade.h:1
msgid "<b>Repository _name:</b>"
msgstr "<b>軟體庫名稱(_n)：</b>"

#: ui/addrepo.glade.h:2
msgid "<b>Repository _type:</b>"
msgstr "<b>軟體庫類型(_t)：</b>"

#: ui/addrepo.glade.h:4
msgid "Configure _proxy"
msgstr "設定 proxy(_p)"

#: ui/addrepo.glade.h:5
msgid ""
"HTTP/FTP\n"
"CD/DVD\n"
"NFS\n"
"Hard Drive"
msgstr ""
"HTTP/FTP\n"
"CD/DVD\n"
"NFS\n"
"Hard Drive"

#: ui/addrepo.glade.h:9
msgid ""
"Please provide the configuration information for this software repository."
msgstr "請提供此軟體庫的設定資訊。"

#: ui/addrepo.glade.h:10
msgid "Proxy U_RL (host:port)"
msgstr "主機 URL（host:port）(_R)"

#: ui/addrepo.glade.h:11
msgid "Proxy pass_word"
msgstr "Proxy 密碼(_w)"

#: ui/addrepo.glade.h:12
msgid "Proxy u_sername"
msgstr "Proxy 用戶名稱(_s)"

#: ui/addrepo.glade.h:13
msgid "Repository _URL"
msgstr "軟體庫 URL(_U)"

#: ui/addrepo.glade.h:14
msgid "Select A Directory"
msgstr "選擇目錄"

#: ui/addrepo.glade.h:15
msgid "URL is a _mirror list"
msgstr "URL 是個鏡像清單(_m)"

#: ui/addrepo.glade.h:16
msgid "_Directory"
msgstr "目錄(_D)"

#: ui/addrepo.glade.h:17
msgid "_Options"
msgstr "選項(_O)"

#: ui/addrepo.glade.h:18
msgid "_Partition"
msgstr "分割區(_P)"

#: ui/addrepo.glade.h:19
msgid "_Path"
msgstr "路徑(_P)"

#: ui/addrepo.glade.h:20
msgid "_Server"
msgstr "伺服器(_S)"

#: ui/anaconda.glade.h:1
msgid "Reboo_t"
msgstr "重新開機(_t)"

#: ui/anaconda.glade.h:4
msgid "_Next"
msgstr "下一步(_N)"

#: ui/autopart.glade.h:1
#, fuzzy
msgid "<b>Shrink partition _to size (in MB):</b>"
msgstr "<b>重設目的地大小，單位為 MB(_t)：</b>"

#: ui/autopart.glade.h:2
msgid "Re_view and modify partitioning layout"
msgstr "檢視並修改分割區(_v)"

#: ui/autopart.glade.h:3
msgid "Volume to Shrink"
msgstr "欲縮小的卷測"

#: ui/autopart.glade.h:4
msgid ""
"Which partition would you like to shrink to make room for your installation?"
msgstr "您希望縮小哪個分割區以便空出空間來進行安裝？"

#: ui/autopart.glade.h:5
msgid "Which type of installation would you like?"
msgstr ""

#: ui/autopart.glade.h:6
msgid "_Encrypt system"
msgstr "加密系統(_E)"

#: ui/autopart.glade.h:7
msgid "_Shrink"
msgstr "縮小(_S)"

#: ui/blwhere.glade.h:1
msgid "/boot"
msgstr "/boot"

#: ui/blwhere.glade.h:2
msgid "BIOS Drive Order"
msgstr "BIOS 磁碟順序"

#: ui/blwhere.glade.h:3
msgid "Boot loader device"
msgstr "開機載入程式裝置"

#: ui/blwhere.glade.h:4
msgid "First BIOS drive:"
msgstr "第一個 BIOS 磁碟："

#: ui/blwhere.glade.h:5
msgid "Fourth BIOS drive:"
msgstr "第四個 BIOS 磁碟："

#: ui/blwhere.glade.h:6
msgid "MBR"
msgstr "MBR"

#: ui/blwhere.glade.h:7
msgid "Second BIOS drive:"
msgstr "第二個 BIOS 磁碟："

#: ui/blwhere.glade.h:8
msgid "Third BIOS drive:"
msgstr "第三個 BIOS 磁碟："

#: ui/blwhere.glade.h:9
msgid "Where would you like to install the boot loader for your system?"
msgstr "您希望將您系統的開機載入程式安裝在那裡？"

#: ui/cleardisks.glade.h:1
msgid "<b>Data Storage Devices</b> (to be mounted only)"
msgstr ""

#: ui/cleardisks.glade.h:2
#, fuzzy
msgid "<b>Install Target Devices</b>"
msgstr "<b>正在安裝 %s</b>（%s）\n"

#: ui/cleardisks.glade.h:4
msgid ""
"Below are the storage devices you've selected to be a part of this "
"installation.  Please indicate using the arrows below which devices you'd "
"like to use as data drives (these will not be formatted, only mounted) and "
"which devices you'd like to use as system drives (these may be formatted)."
msgstr ""

#: ui/create-storage.glade.h:1
msgid ""
"<span size=\"small\" color=\"gray\">Create a RAID formated partition</span>"
msgstr ""

#: ui/create-storage.glade.h:2
msgid ""
"<span size=\"small\" color=\"gray\">Create a logical volume on selected "
"volume group</span>"
msgstr ""

#: ui/create-storage.glade.h:3
msgid ""
"<span size=\"small\" color=\"gray\">Create an LVM formated partition</span>"
msgstr ""

#: ui/create-storage.glade.h:4
msgid ""
"<span size=\"small\" color=\"gray\">Facilitates RAID device creation</span>"
msgstr ""

#: ui/create-storage.glade.h:5
msgid ""
"<span size=\"small\" color=\"gray\">General purpose partition creation</span>"
msgstr ""

#: ui/create-storage.glade.h:6
msgid ""
"<span size=\"small\" color=\"gray\">Requires at least 1 free LVM formated "
"partition</span>"
msgstr ""

#: ui/create-storage.glade.h:7
msgid ""
"<span size=\"small\" color=\"gray\">Requires at least 2 free RAID formated "
"partitions</span>"
msgstr ""

#: ui/create-storage.glade.h:8
#, fuzzy
msgid "Create"
msgstr "剩餘空間"

#: ui/create-storage.glade.h:9
msgid "Create LVM"
msgstr ""

#: ui/create-storage.glade.h:10
#, fuzzy
msgid "Create Partition"
msgstr "選擇分割區"

#: ui/create-storage.glade.h:11
#, fuzzy
msgid "Create Software RAID"
msgstr "軟體磁碟陣列（RAID）"

#: ui/create-storage.glade.h:12
msgid "Create Storage"
msgstr ""

#: ui/create-storage.glade.h:13
#, fuzzy
msgid "LVM Logical Volume"
msgstr "建立邏輯卷冊"

#: ui/create-storage.glade.h:14
#, fuzzy
msgid "LVM Physical Volume"
msgstr "邏輯卷冊(_L)"

#: ui/create-storage.glade.h:15
#, fuzzy
msgid "LVM Volume Group"
msgstr "LVM 卷冊群組"

#: ui/create-storage.glade.h:16
#, fuzzy
msgid "RAID Clone"
msgstr "RAID 選項"

#: ui/create-storage.glade.h:18
#, fuzzy
msgid "RAID Partition"
msgstr "新增分割區"

#: ui/create-storage.glade.h:19
#, fuzzy
msgid "Standard Partition"
msgstr "新增分割區"

#: ui/detailed-dialog.glade.h:1
msgid "Info"
msgstr "資訊"

#: ui/detailed-dialog.glade.h:2
msgid "_Details"
msgstr "詳細資訊（_D）"

#: ui/fcoe-config.glade.h:1
msgid "Configure FCoE Parameters"
msgstr "設定 FCoE 參數"

#: ui/fcoe-config.glade.h:2
#, fuzzy
msgid "NIC:"
msgstr "NIC"

#: ui/fcoe-config.glade.h:3
msgid ""
"Please select the network interface which is connected to\n"
"your FCoE switch."
msgstr ""
"請選擇連至您的 FCoE switch 的\n"
"網路介面卡。"

#: ui/fcoe-config.glade.h:6
msgid "_Add FCoE Disk(s)"
msgstr "新增 FCoE 磁碟(_A)"

#: ui/filter.glade.h:2
#, no-c-format
msgid "<b>%s devices (%s) selected</b> out of %s devices (%s) total."
msgstr ""

#: ui/filter.glade.h:3
msgid ""
"<b>Tip:</b> Selecting a drive on this screen does not necessarily mean it "
"will be wiped by the installation process.  Also, note that post-"
"installation you may mount drives you did not select here by modifying your /"
"etc/fstab file."
msgstr ""

#: ui/filter.glade.h:4
#, fuzzy
msgid "Add Advanced Target"
msgstr "進階儲存選項"

#: ui/filter.glade.h:5
#, fuzzy
msgid "Basic Devices"
msgstr "裝置"

#: ui/filter.glade.h:6
#, fuzzy
msgid "Filter By:"
msgstr "提交錯誤(_F)"

#: ui/filter.glade.h:7
#, fuzzy
msgid "Firmware RAID"
msgstr "軟體磁碟陣列（RAID）"

#: ui/filter.glade.h:8
#, fuzzy
msgid "Identifier:"
msgstr "辨識"

#: ui/filter.glade.h:9
msgid ""
"Interconnect\n"
"Vendor\n"
"Identifier"
msgstr ""

#: ui/filter.glade.h:12
msgid "LUN:"
msgstr ""

#: ui/filter.glade.h:13
#, fuzzy
msgid "Multipath Devices"
msgstr "複製裝置"

#: ui/filter.glade.h:14
#, fuzzy
msgid "Other SAN Devices"
msgstr "RAID 裝置"

#: ui/filter.glade.h:15
msgid ""
"Please select the drives you'd like to install the operating system on, as "
"well as any drives you'd like to automatically mount to your system, below:"
msgstr ""

#: ui/filter.glade.h:16
msgid ""
"Port / Target / LUN\n"
"Target Identifier"
msgstr ""

#: ui/filter.glade.h:18
msgid "Port:"
msgstr ""

#: ui/filter.glade.h:19
msgid "Search"
msgstr ""

#: ui/filter.glade.h:20
msgid "Search By:"
msgstr ""

#: ui/filter.glade.h:21
msgid "Search Results:"
msgstr ""

#: ui/filter.glade.h:22
msgid "Show Identifiers that Include:"
msgstr ""

#: ui/filter.glade.h:23
msgid "Show Only Devices From:"
msgstr ""

#: ui/filter.glade.h:24
msgid "Show Only Devices Using:"
msgstr ""

#: ui/filter.glade.h:25
#, fuzzy
msgid "Target:"
msgstr "目標磁碟："

#: ui/iscsi-config.glade.h:1
msgid "<b>CHAP _Password:</b>"
msgstr "<b>CHAP 密碼(_P)：</b>"

#: ui/iscsi-config.glade.h:2
msgid "<b>CHAP _Username:</b>"
msgstr "<b>CHAP 使用者名稱(_U)：</b>"

#: ui/iscsi-config.glade.h:3
msgid "<b>Reverse CHAP P_assword:</b>"
msgstr "<b>反向 CHAP 密碼(_a)：</b>"

#: ui/iscsi-config.glade.h:4
msgid "<b>Reverse CHAP U_sername:</b>"
msgstr "<b>反向CHAP 使用者名稱(_s)：</b>"

#: ui/iscsi-config.glade.h:5
msgid "<b>_Target IP Address:</b>"
msgstr "<b>目的地 IP 位址(_T)：</b>"

#: ui/iscsi-config.glade.h:6
msgid "<b>iSCSI Initiator _Name:</b>"
msgstr "<b>iSCSI 起始名稱(_N)：</b>"

#: ui/iscsi-config.glade.h:9
msgid "_Add target"
msgstr "新增目標(_A)"

#: ui/lukspassphrase.glade.h:1
msgid ""
"Also add this passphrase to all existing encrypted devices to streamline the "
"boot process"
msgstr "將此密碼套用在所有現有的加密裝置上以增加開機程序進行上的效率"

#: ui/lukspassphrase.glade.h:2
msgid ""
"Choose a passphrase for this encrypted partition. You will be prompted for "
"the passphrase during system boot."
msgstr "請為此加密分割區選擇一組密碼。您將會在系統啟動時被要求輸入這組密碼。"

#: ui/lukspassphrase.glade.h:3
msgid "Confirm passphrase:"
msgstr "確認密碼："

#: ui/lukspassphrase.glade.h:4
msgid "Enter passphrase for encrypted partition"
msgstr "請為加密分割區輸入密碼"

#: ui/lukspassphrase.glade.h:5
msgid "Enter passphrase:"
msgstr "請輸入密碼："

#: ui/netconfig.glade.h:2
msgid "<b>Gateway:</b>"
msgstr "<b>閘道器：</b>"

#: ui/netconfig.glade.h:3
msgid "<b>IPv4 Address:</b>"
msgstr "<b>IPv4 位址：</b>"

#: ui/netconfig.glade.h:4
msgid "<b>IPv6 Address:</b>"
msgstr "<b>IPv6 位址：</b>"

#: ui/netconfig.glade.h:5
msgid "<b>Nameserver:</b>"
msgstr "<b>名稱伺服器：</b>"

#: ui/netconfig.glade.h:6
msgid "<b>_Interface:</b>"
msgstr "<b>介面卡(_I)：</b>"

#: ui/netconfig.glade.h:7
msgid "Enable IPv_4 support"
msgstr "啟用 IPv_4 支援"

#: ui/netconfig.glade.h:8
msgid "Enable IPv_6 support"
msgstr "啟用 IPv_6 支援"

#: ui/netconfig.glade.h:11
msgid "Use _dynamic IP configuration (DHCP)"
msgstr "使用動態 IP 設定 - DHCP(_d)"

#: ui/network.glade.h:1
msgid "Hostname:"
msgstr "主機名稱："

#: ui/network.glade.h:2
msgid ""
"Please name this computer.  The hostname identifies the computer on a "
"network."
msgstr "請為此電腦命名。主機名稱可用來辨識網路上的某部電腦。"

#: ui/tasksel.glade.h:1
msgid "Customize _later"
msgstr "稍後自訂(_l)"

#: ui/tasksel.glade.h:2
msgid ""
"Please select any additional repositories that you want to use for software "
"installation."
msgstr "請選擇任何您想要使用軟體安裝的額外軟體庫。"

#: ui/tasksel.glade.h:4
#, no-c-format
msgid ""
"The default installation of %s includes a set of software applicable for "
"general internet usage.  What additional tasks would you like your system to "
"support?"
msgstr ""
"%s 的預設安裝包括使用網際網路的一般性軟體。您希望系統還支援哪些東西呢？"

#: ui/tasksel.glade.h:5
msgid ""
"You can further customize the software selection now, or after install via "
"the software management application."
msgstr "您可以現在進一步自訂要安裝的軟體，或在安裝後透過軟體管理程式進行。"

#: ui/tasksel.glade.h:6
msgid "_Add additional software repositories"
msgstr "新增額外軟體庫(_A)"

#: ui/tasksel.glade.h:7
msgid "_Customize now"
msgstr "立即自訂(_C)"

#: ui/tasksel.glade.h:8
msgid "_Modify repository"
msgstr "修改軟體庫(_M)"

#: ui/zfcp-config.glade.h:1
msgid "<b>Device number:</b>"
msgstr "<b>裝置號碼：</b>"

#: ui/zfcp-config.glade.h:2
msgid "<b>FCP LUN:</b>"
msgstr "<b>FCP LUN：</b>"

#: ui/zfcp-config.glade.h:3
msgid "<b>WWPN:</b>"
msgstr "<b>WWPN：</b>"

#: ui/zfcp-config.glade.h:4
msgid "Add FCP device"
msgstr "新增 FCP 裝置"

#: lang-table.h:1
msgid "Afrikaans"
msgstr "南非荷蘭語"

#: lang-table.h:2
msgid "Arabic"
msgstr "阿拉伯語"

#: lang-table.h:3
msgid "Assamese"
msgstr "阿薩姆語"

#: lang-table.h:4
msgid "Bengali"
msgstr "孟加拉語"

#: lang-table.h:5
msgid "Bengali(India)"
msgstr "孟加拉語（印度）"

#: lang-table.h:6
msgid "Bulgarian"
msgstr "保加利亞語"

#: lang-table.h:7
msgid "Catalan"
msgstr "加泰隆語"

#: lang-table.h:8
msgid "Chinese(Simplified)"
msgstr "中文（簡體）"

#: lang-table.h:9
msgid "Chinese(Traditional)"
msgstr "中文（正體）"

#: lang-table.h:10
msgid "Croatian"
msgstr "克羅地亞語"

#: lang-table.h:11
msgid "Czech"
msgstr "捷克語"

#: lang-table.h:12
msgid "Danish"
msgstr "丹麥語"

#: lang-table.h:13
msgid "Dutch"
msgstr "荷蘭語"

#: lang-table.h:14
msgid "English"
msgstr "英語"

#: lang-table.h:15
msgid "Estonian"
msgstr "愛沙尼亞語"

#: lang-table.h:16
msgid "Finnish"
msgstr "芬蘭語"

#: lang-table.h:17
msgid "French"
msgstr "法語"

#: lang-table.h:18
msgid "German"
msgstr "德語"

#: lang-table.h:19
msgid "Greek"
msgstr "希臘語"

#: lang-table.h:20
msgid "Gujarati"
msgstr "古吉拉特語"

#: lang-table.h:21
msgid "Hebrew"
msgstr "希伯來語"

#: lang-table.h:22
msgid "Hindi"
msgstr "印度語"

#: lang-table.h:23
msgid "Hungarian"
msgstr "匈牙利語"

#: lang-table.h:24
msgid "Icelandic"
msgstr "冰島語"

#: lang-table.h:25
msgid "Iloko"
msgstr "伊洛卡諾語"

#: lang-table.h:26
msgid "Indonesian"
msgstr "印尼語"

#: lang-table.h:27
msgid "Italian"
msgstr "義大利語"

#: lang-table.h:28
msgid "Japanese"
msgstr "日語"

#: lang-table.h:29
msgid "Kannada"
msgstr "坎那達語"

#: lang-table.h:30
msgid "Korean"
msgstr "韓語"

#: lang-table.h:31
msgid "Macedonian"
msgstr "馬其頓語"

#: lang-table.h:32
msgid "Maithili"
msgstr "邁蒂利語"

#: lang-table.h:33
msgid "Malay"
msgstr "馬來語"

#: lang-table.h:34
msgid "Malayalam"
msgstr "馬拉亞拉姆語"

#: lang-table.h:35
msgid "Marathi"
msgstr "馬拉地語"

#: lang-table.h:36
msgid "Nepali"
msgstr "尼泊爾語"

#: lang-table.h:37
msgid "Norwegian(Bokmål)"
msgstr "挪威語（Bokmål）"

#: lang-table.h:38
msgid "Northern Sotho"
msgstr "北索托語"

#: lang-table.h:39
msgid "Oriya"
msgstr "奧里雅語"

#: lang-table.h:40
msgid "Persian"
msgstr "波斯語"

#: lang-table.h:41
msgid "Polish"
msgstr "波蘭語"

#: lang-table.h:42
msgid "Portuguese"
msgstr "葡萄牙語"

#: lang-table.h:43
msgid "Portuguese(Brazilian)"
msgstr "巴西葡萄牙語"

#: lang-table.h:44
msgid "Punjabi"
msgstr "旁遮普語"

#: lang-table.h:45
msgid "Romanian"
msgstr "羅馬尼亞語"

#: lang-table.h:46
msgid "Russian"
msgstr "俄語"

#: lang-table.h:47
msgid "Serbian"
msgstr "塞爾維亞語"

#: lang-table.h:48
msgid "Serbian(Latin)"
msgstr "塞爾維亞拉丁語"

#: lang-table.h:49
msgid "Sinhala"
msgstr "錫蘭語"

#: lang-table.h:50
msgid "Slovak"
msgstr "斯洛伐克語"

#: lang-table.h:51
msgid "Slovenian"
msgstr "斯洛文尼亞語"

#: lang-table.h:52
msgid "Spanish"
msgstr "西班牙語"

#: lang-table.h:53
msgid "Swedish"
msgstr "瑞典語"

#: lang-table.h:54
msgid "Tajik"
msgstr "塔吉克語"

#: lang-table.h:55
msgid "Tamil"
msgstr "泰米爾語"

#: lang-table.h:56
msgid "Telugu"
msgstr "泰盧固語"

#: lang-table.h:57
msgid "Turkish"
msgstr "土耳其語"

#: lang-table.h:58
msgid "Ukrainian"
msgstr "烏克蘭語"

#: lang-table.h:59
msgid "Vietnamese"
msgstr "越南語"

#: lang-table.h:60
msgid "Welsh"
msgstr "威爾斯語"

#: lang-table.h:61
msgid "Zulu"
msgstr "祖魯語"

#~ msgid "Install class forcing text mode installation"
#~ msgstr "強制進入文字安裝模式"

#~ msgid "reipl configuration successful => reboot"
#~ msgstr "reipl 設定成功 => 重新啟動"

#~ msgid "reipl configuration failed => halt"
#~ msgstr "reipl 設定失敗 => 停滯"

#~ msgid "The installer will now exit."
#~ msgstr "安裝程式即將關閉。"

#~ msgid "Device Resize Failed"
#~ msgstr "裝置重設大小失敗"

#~ msgid "An error was encountered while resizing device %s."
#~ msgstr "重設裝置 %s 的大小時發生了錯誤。"

#~ msgid "Device Creation Failed"
#~ msgstr "裝置建立失敗"

#~ msgid "An error was encountered while creating device %s."
#~ msgstr "建立裝置 %s 時發生了錯誤。"

#~ msgid "Device Removal Failed"
#~ msgstr "裝置移除失敗"

#~ msgid "An error was encountered while removing device %s."
#~ msgstr "移除裝置 %s 時發生了錯誤。"

#~ msgid "An error was encountered while setting up device %s."
#~ msgstr "設定裝置 %s 時發生了錯誤。"

#~ msgid "An error was encountered while formatting device %s."
#~ msgstr "格式化裝置 %s 時發生了錯誤。"

#~ msgid "Storage Activation Failed"
#~ msgstr "儲存裝置啟用失敗"

#~ msgid ""
#~ "An error was encountered while activating your storage configuration."
#~ msgstr "啟用您的儲存裝置設定時發生了錯誤。"

#~ msgid "Invalid Key"
#~ msgstr "無效的金鑰"

#~ msgid "The key you entered is invalid."
#~ msgstr "您所輸入的金鑰無效。"

#~ msgid "_Skip"
#~ msgstr "跳過(_S)"

#~ msgid "The installer will now exit..."
#~ msgstr "安裝程式即將關閉..."

#~ msgid "/boot is not on an ext2 filesystem."
#~ msgstr "ext2 檔案系統上沒有 /boot 分割區。"

#~ msgid "Please enter your %(instkey)s"
#~ msgstr "請輸入您的 %(instkey)s。"

#~ msgid "Skip entering %(instkey)s"
#~ msgstr "跳過輸入 %(instkey)s"

#~ msgid "%s not found"
#~ msgstr "找不到 %s"

#~ msgid "%s %s installation"
#~ msgstr "%s %s 安裝"

#~ msgid ""
#~ "The default installation of %s includes a set of software applicable for "
#~ "general internet usage. What additional tasks would you like your system "
#~ "to include support for?"
#~ msgstr ""
#~ "%s 的預設安裝包括使用網際網路的一般性軟體。您希望系統還支援哪些額外項目"
#~ "呢？"

#~ msgid "Office and Productivity"
#~ msgstr "辦公軟體 / 生產力軟體"

#~ msgid "Office"
#~ msgstr "辦公軟體"

#~ msgid "Multimedia"
#~ msgstr "多媒體"

#~ msgid "Web server"
#~ msgstr "網頁伺服器"

#~ msgid "Virtualization"
#~ msgstr "虛擬化"

#~ msgid "Clustering"
#~ msgstr "叢集"

#~ msgid "Storage Clustering"
#~ msgstr "儲存裝置叢集"

#~ msgid "Installation Number"
#~ msgstr "安裝序號"

#~ msgid ""
#~ "Would you like to enter an Installation Number (sometimes called "
#~ "Subscription Number) now? This feature enables the installer to access "
#~ "any extra components included with your subscription.  If you skip this "
#~ "step, additional components can be installed manually later.\n"
#~ "\n"
#~ "See http://www.redhat.com/InstNum/ for more information."
#~ msgstr ""
#~ "您是否希望現在輸入一組安裝序號（亦稱為訂閱號碼）？這項功能能讓安裝程式存取"
#~ "包含在您訂閱中的任何額外元件。若您跳過此步驟的話，額外的元件可在之後經由手"
#~ "動式安裝。\n"
#~ "\n"
#~ "欲取得更多資訊請參閱 http://www.redhat.com/InstNum/。"

#~ msgid ""
#~ "If you cannot locate the Installation Number, consult http://www.redhat."
#~ "com/InstNum/"
#~ msgstr "若您找不到安裝序號，請參閱 http://www.redhat.com/InstNum/"

#~ msgid "%s: %s"
#~ msgstr "%s: %s"

#~ msgid ""
#~ "Do you really want to boot from a disk which is not used for installation?"
#~ msgstr "您是否希望由一個非安裝用的磁碟來進行開機？"

#~ msgid "Rescanning disks"
#~ msgstr "正在重新掃描磁碟"

#~ msgid "_Install %s"
#~ msgstr "安裝 %s(_I)"

#~ msgid "The following installed system will be upgraded:"
#~ msgstr "將會升級下列已安裝的系統："

#~ msgid "Unknown"
#~ msgstr "不知名類型"

#~ msgid "Not supported"
#~ msgstr "不支援"

#~ msgid "LVM is NOT supported on this platform."
#~ msgstr "這個平台不支援 LVM。"

#~ msgid "Software RAID is NOT supported on this platform."
#~ msgstr "這個平台不支援軟體 RAID。"

#~ msgid "No RAID minor device numbers available"
#~ msgstr "找不到 RAID 鏡像（minor）裝置的號碼"

#~ msgid ""
#~ "A software RAID device cannot be created because all of the available "
#~ "RAID minor device numbers have been used."
#~ msgstr ""
#~ "無法建立軟體 RAID 裝置，因為所有的 RAID 鏡像（minor）裝置號碼都已經被使用"
#~ "了。"

#~ msgid "What do you want to do now?"
#~ msgstr "現在您想要怎麼做？"

#~ msgid "Create a RAID _device [default=/dev/md%s]."
#~ msgstr "建立 RAID 裝置 [預設為 /dev/md%s](_d)。"

#~ msgid "Clone a _drive to create a RAID device [default=/dev/md%s]."
#~ msgstr "完整複製一個磁碟以建立 RAID 裝置 [預設為 /dev/md%s](_d)。"

#~ msgid "Ne_w"
#~ msgstr "新增(_w)"

#~ msgid "R_AID"
#~ msgstr "R_AID(_A)"

#~ msgid "_LVM"
#~ msgstr "_LVM(_L)"

#~ msgid "Hide RAID device/LVM Volume _Group members"
#~ msgstr "隱藏 RAID 裝置/LVM 卷冊群組成員(_G)"

#~ msgid ""
#~ "Clone Drive Tool\n"
#~ "\n"
#~ "This tool allows you to significantly reduce the amount of effort "
#~ "required to setup RAID arrays.  This tool uses a source drive which has "
#~ "been prepared with the desired partitioning layout, and clones this "
#~ "layout onto other similar sized drives.  Then a RAID device can be "
#~ "created.\n"
#~ "\n"
#~ "NOTE: The source drive must have partitions which are restricted to be on "
#~ "that drive only, and can only contain unused software RAID partitions.  "
#~ "Other partition types are not allowed.\n"
#~ "\n"
#~ "EVERYTHING on the target drive(s) will be destroyed by this process."
#~ msgstr ""
#~ "磁碟複製工具\n"
#~ "\n"
#~ "這個工具使您大大的減少設定 RAID 陣列所需的時間。它的用途是以一個已經準備好"
#~ "想要的磁碟分割配置的來源磁碟，然後完整複製這個配置到其他容量相近的磁碟上。"
#~ "然後，就可以建立 RAID 裝置了。\n"
#~ "\n"
#~ "請注意：來源磁碟的分割區必須限制只存放在該磁碟上，而且只能含有未使用的軟"
#~ "體 RAID 分割區。其他分割區類型則不被允許。\n"
#~ "\n"
#~ "在目標磁碟上的所有資料將會完全被摧毀。"

#~ msgid ""
#~ "The following error occurred while setting up the installation "
#~ "repository:\n"
#~ "\n"
#~ "%s\n"
#~ "\n"
#~ "Please provide the correct information for installing %s"
#~ msgstr ""
#~ "設定安裝程序的軟體庫時發生了下列錯誤：\n"
#~ "\n"
#~ "%s\n"
#~ "\n"
#~ "請提供安裝 %s 的正確資訊"

#~ msgid "Unknown Host"
#~ msgstr "不明主機"

#~ msgid "%s is not a valid hostname."
#~ msgstr "%s 不是有效的主機名稱。"

#~ msgid "_Ignore drive"
#~ msgstr "忽略磁碟(_I)"

#~ msgid "_Re-initialize drive"
#~ msgstr "格式化磁碟(_R)"

#~ msgid ""
#~ "Enter the device name for the NIC which is connected to the FCoE SAN. For "
#~ "example \"eth0\"."
#~ msgstr "請輸入連至了 FCoE SAN 的 NIC 裝置名稱。例如「eth0」。"

#~ msgid "NIC device name"
#~ msgstr "NIC 裝置名稱"

#~ msgid "%s is not a valid NIC device name."
#~ msgstr "%s 不是一組有效的 NIC 裝置名稱。"

#~ msgid ""
#~ "This release of %s supports the an updated file system, which has several "
#~ "benefits over the file system traditionally shipped in %s.  This "
#~ "installation program can migrate formatted partitions without data loss.\n"
#~ "\n"
#~ "Which of these partitions would you like to migrate?"
#~ msgstr ""
#~ "這個 %s 版本支援更新的檔案系統，這比之前 %s 所附的傳統檔案系統多出許多新的"
#~ "功能。此安裝程式可將格式化的分割區進行遷移而不流失資料。\n"
#~ "\n"
#~ "您想要遷移哪些分割區？"

#~ msgid ""
#~ "Installation requires partitioning of your hard drive.  The default "
#~ "layout is suitable for most users.  Select what space to use and which "
#~ "drives to use as the install target. You can also choose to create your "
#~ "own custom layout."
#~ msgstr ""
#~ "安裝過程需要分割您的硬碟。預設分割格式適用於大部份的使用者。請選擇欲使用的"
#~ "空間和作為安裝目標的磁碟。您亦可選擇建立您自己的自訂格式。"

#~ msgid "What drive would you like to _boot this installation from?"
#~ msgstr "你希望由哪個磁碟來啟動此安裝？(_b)"

#~ msgid "_Advanced storage configuration"
#~ msgstr "進階儲存設定(_A)"

#~ msgid "_Select the drive(s) to use for this installation."
#~ msgstr "選擇您想要用於安裝的磁碟機(_S)。"

#~ msgid "%(instkey)s:"
#~ msgstr "%(instkey)s："

#~ msgid "Please enter your %(instkey)s."
#~ msgstr "請輸入您的 %(instkey)s。"