QubesOS/qubes-installer-qubes-os
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
782 Commits 6 Branches 387 Tags 58 MiB
72765538f7
Commit Graph

144 Commits

Author SHA1 Message Date
Marek Marczykowski-Górecki
72765538f7
anaconda: reset all services to default state 
Some preset files may be installed when actual services are already
enabled/disabled. To not worry about package installation order, simply
reset all the services to default state when all the packages are
installed.

Fixes QubesOS/qubes-issues#2049
 2016-06-06 02:28:47 +02:00
Marek Marczykowski-Górecki
1c80b74083
anaconda: drop useless on Qubes dependencies on network filesystems 
Installing Qubes on network drive is not supported, so drop those
dependencies.
 2016-06-06 00:58:32 +02:00
Marek Marczykowski-Górecki
7ff84cf133
anaconda: do not have any requirements on /boot in EFI mode 
EFI boot uses only /boot/efi, so /boot may be even on encrypted volume,
LVM, btrfs or anything else. Instead of allowing just LVM, override the
whole check for /boot.

Fixes QubesOS/qubes-issues#1721
 2016-06-05 22:21:03 +02:00
Marek Marczykowski-Górecki
13f17526ed
anaconda 23.19.10-2, lorax-templates-qubes 3.2.0, lorax 23.20-2, qubes-anaconda-addon 3.2.0-1 2016-05-18 03:22:57 +02:00
Marek Marczykowski-Górecki
b7d9d54a1e
Revert "anaconda: workaround efibootmgr bug (SIGABRT while removing entries)" 
This reverts commit bdba0f99d0.

The workaround is not needed anymore - efibootmgr is new enough.
 2016-05-17 14:18:19 +02:00
Marek Marczykowski-Górecki
76e5589adf
anaconda: PasswordSpoke merge fix 
QubesOS/qubes-issues#1807
 2016-04-24 23:41:16 +02:00
Marek Marczykowski-Górecki
d576319578
anaconda: enable only initial-setup.service variant 
It should take care of choosing the right one.

QubesOS/qubes-issues#1807
 2016-04-24 23:40:32 +02:00
M. Vefa Bicakci
ef60bed5c9
anaconda: Do not depend on chrony 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
29a50e7def
anaconda: Disable the NTP configuration spoke 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
fd37700c14
anaconda: Make sure that a user is created at installation time 
This way, Qubes OS-specific initial-setup procedures will always have
a user to work with.
 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
ed17da5dc6
anaconda: Modify user configuration spoke for Qubes OS 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
dfc0db0a09
anaconda: Do not fail during initramfs start-up due to missing url-lib 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
763c9b3490
anaconda: Do not rely on new-kernel-pkg 
Qubes OS does not use grubby, so there is no need to check for the
existence of the new-kernel-pkg executable.
 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
c08e51c65b
anaconda: Update po files 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
b111b02b53
anaconda: Fix a regular expression determining Release 
Without the start-of-line matcher, other lines are matched as well,
causing invalid PACKAGE_RELEASE variable substitutions within the
Makefiles.
 2016-04-10 00:00:00 -04:00
M. Vefa Bicakci
38f3e28d77
anaconda: Update to 23.19.10 
Use the output of

  git diff --full-index --binary anaconda-22.20.13-1..anaconda-23.19.10-1

from anaconda's git repository and fix-up merge conflicts.
 2016-04-10 00:00:00 -04:00
Marek Marczykowski-Górecki
f8d607cfff
anaconda: update po files 2016-04-05 14:56:36 +02:00
Jon Griffiths
fa3c28b982 anaconda: Add dracut-live as a dependency 2016-03-28 13:04:34 +13:00
Jon Griffiths
132b411e62 anaconda: Include anaconda-dracut as a dependency 2016-03-22 02:27:18 +13:00
Jon Griffiths
ea1f4a7131 Remove and gitignore checked in generated file 2016-03-22 02:27:18 +13:00
Marek Marczykowski-Górecki
296d869179 anaconda: use kernel-install instead of grubby to regenerate initrd/grub.conf 
Since we have own hook there, it properly handles Xen. This means we no
longer need post scripts in kickstart for that.

Conflicts:
	anaconda/pyanaconda/packaging/__init__.py
 2016-03-22 02:27:17 +13:00
Marek Marczykowski-Górecki
caeea07515 anaconda: remove autogenerated configure scripts 2016-03-22 02:27:17 +13:00
Marek Marczykowski-Górecki
701ced5ddb anaconda: update to 22.20.13-1 
Apply diff anaconda-21.48.21-1..anaconda-22.20.13-1
 2016-03-22 02:27:17 +13:00
Marek Marczykowski-Górecki
8e6a0a7091 anaconda: allow locked root password 2016-03-22 02:27:16 +13:00
Marek Marczykowski-Górecki
48aa0e06c9 anaconda: lower disk requirements 
Base installed system, including one template uses about 8GB. So make it
possible to install the system with root partition about that size. This
is probably bad idea, but the limit here is hard - it isn't possible to
force installation on smaller partition.
 2016-03-22 02:27:16 +13:00
Marek Marczykowski-Górecki
63da7da0ec anaconda: update Qubes-specific code for Fedora 21 version 2016-03-22 02:27:16 +13:00
Marek Marczykowski-Górecki
3e63d1dd37 anaconda: update to 21.48.21-1 
Apply diff anaconda-20.25.16-1..anaconda-21.48.21-1
 2016-03-22 02:27:15 +13:00
Marek Marczykowski-Górecki
2556a42c04
anaconda: EFI: create xen.cfg before registering boot entry 
This will help installing, even when efibootmgr fails. Because xen.cfg
will be already populated.

QubesOS/qubes-issues#794
 2016-03-18 13:27:48 +01:00
Marek Marczykowski-Górecki
ab1104fa13
anaconda 20.25.16-12, firstboot 18.6-10, lorax-templates-qubes 3.1.2 2016-02-12 04:46:05 +01:00
Marek Marczykowski-Górecki
2838da02cf
anaconda: allow /boot on LVM in UEFI mode 
Since all the required files are on ESP (and are loaded by xen.efi), we
don't need /boot accessible at all from there. This will in practice
allow to not have separate /boot at all.

Fixes QubesOS/qubes-issues#1721
 2016-02-06 00:23:37 +01:00
Marek Marczykowski-Górecki
763098db0e
anaconda: use installer kernel parameters as default for installed system 
This way if any kernel parameter was need to boot Qubes on particular
hardware, it will also be set to installed system

Fixes QubesOS/qubes-issues#1650
 2016-02-06 00:23:37 +01:00
Marek Marczykowski-Górecki
a0a616733f
anaconda 20.25.16-11, firstboot 18.6-9, livecd-tools 20.6-3, lorax-templates-qubes 3.1.1 2015-11-29 04:22:59 +01:00
Marek Marczykowski-Górecki
538d80186d
anaconda: disable crashkernel default options 
We don't support it.
 2015-11-29 04:19:38 +01:00
Marek Marczykowski-Górecki
c83c75b338
anaconda: include default kernel parameters in EFI setup 
QubesOS/qubes-issues#794
 2015-11-29 04:19:38 +01:00
Marek Marczykowski-Górecki
1d4f49961c
anaconda: limit dom0 maxmem to 4GB to limit its overhead on big systems 
Linux kernel have some memory overhead depending on maxmem. Dom0 isn't
meant to use that much memory (most should be assigned to AppVMs), so on
big systems this will be pure waste.

QubesOS/qubes-issues#1136
Fixes QubesOS/qubes-issues#1313
 2015-10-10 00:33:13 +02:00
Marek Marczykowski-Górecki
e842046273
anaconda 20.25.16-10, livecd-tools 20.6-2, lorax-templates-qubes 3.1-1, pungi 3.03-2 
Also set epoch ridiculously high for pungi and livecd-tools to make sure
we use versions with enabled signature checking.
 2015-09-30 00:40:53 +02:00
Marek Marczykowski-Górecki
f29979be41 anaconda: use correct root= kernel parameter when creating EFI xen.cfg 2015-09-25 16:25:46 +02:00
Marek Marczykowski-Górecki
bdba0f99d0 anaconda: workaround efibootmgr bug (SIGABRT while removing entries) 2015-09-25 16:25:46 +02:00
Marek Marczykowski-Górecki
447ba8ab42 anaconda: fix dracut module to work with reduced dependencies 
Do not fail because of not present url-lib. Also 'loop' module requires manual
loading now.
 2015-09-25 16:25:46 +02:00
Marek Marczykowski-Górecki
b024e93e40 lorax: remove network support from UEFI initrd 
Reduce its size to have efiboot.img under 32MB.
This needs rebuilding initrd and we need kernel version for that - so pass it
down from x86.tmpl.
 2015-09-25 16:24:53 +02:00
Marek Marczykowski-Górecki
b3d04825a2
anaconda: generate xen efi configuration 2015-08-05 02:12:11 +02:00
Marek Marczykowski-Górecki
5796c78979
anaconda: disable os prober 
It tries to mount every existing block device, including VM images.
 2015-08-05 02:11:23 +02:00
Marek Marczykowski-Górecki
9e8a70dfb8
anaconda 20.25.16-9 2015-07-13 00:11:14 +02:00
Marek Marczykowski-Górecki
2726c5a9f5
anaconda: use kernel-install instead of grubby to regenerate initrd/grub.conf 
Since we have own hook there, it properly handles Xen. This means we no
longer need post scripts in kickstart for that.
 2015-07-12 16:01:02 +02:00
Marek Marczykowski-Górecki
73e8665a2b anaconda: add dom0_mem=min:1024M to default xen cmdline 
This will solve #959 for new installations.

Related to qubesos/qubes-issues#959
 2015-05-14 21:41:37 +02:00
Marek Marczykowski-Górecki
3d5bcb5b18 anaconda 20.25.16-8 2015-04-12 03:06:55 +02:00
Marek Marczykowski-Górecki
6ec0a27683 anaconda: regenerate grub.cfg using grub2-mkconfig 
Normally anaconda uses grubby to update bootloader configuration. But
unfortunately it breaks grub configuration (removes trailing "=", so
empty variable assignment xen_rm_opts= is broken). Instead of reworking
the whole bootloader support in anaconda, just regenerate grub.cfg at
the end.
 2015-04-12 03:04:49 +02:00
Marek Marczykowski-Górecki
b95bd9af8c anaconda: fix compile warnings 2015-03-22 04:05:06 +01:00
Wojciech Zygmunt Porczyk
d460acf065 anaconda: do not fail on nonexistent inital-setup-* 
Split `systemctl enable` to fail only on nonexistent units. Qubes does not
currently use initial-setup.
 2014-11-10 14:48:31 +01:00
Marek Marczykowski-Górecki
31a39b98c2 Revert "anaconda+lorax: install 3.11 VM kernel in addition to default one (#868)" 
This reverts commit 277c6dde71.
DispVM is back working with newer kernels.
 2014-06-27 17:25:21 +02:00